In situ Activation of Molecular Oxygen at Intermetallic Spacing-Optimized Iron Network-Like Sites for Boosting Electrocatalytic Oxygen Reduction.

The oxygen reduction reaction (ORR) catalyzed by transition-metal single-atom catalysts (SACs) is promising for practical applications in energy-conversion devices, but great challenges still remain due to the sluggish kinetics of O═O cleavage. Herein, a kind of high-density iron network-like sites catalysts are constructed with optimized intermetallic distances on an amino-functionalized carbon matrix (Fe-HDNSs). Quasi-in situ soft X-ray absorption spectroscopy and in situ synchrotron infrared characterizations demonstrate that the optimized intermetallic distances in Fe-HDNSs can in situ activate the molecular oxygen by fast electron compensation through the hybridized Fe 3d‒O 2p, which efficiently facilitates the cleavage of the O═O bond to *O species and highly suppresses the side reactions for an accelerated kinetics of the 4e- ORR. As a result, the well-designed Fe-HDNSs catalysts exhibit superior performances with a half-wave potential of 0.89 V versus reversible hydrogen electrode (RHE) and a kinetic current density of 72 mA cm-2@0.80 V versus RHE, exceeding most of the noble-metal-free ORR catalysts. This work offers some new insights into the understanding of 4e- ORR kinetics and reaction pathways to boost electrochemical performances of SACs.

Interface Engineering a High Content of Co3+ Sites on Co3O4 Nanoparticles to Boost Acidic Oxygen Evolution.

Non-noble metal oxides have emerged as potential candidate electrocatalysts for acidic oxygen evolution reactions (OERs) due to their earth abundance; however, improving their catalytic activity and stability simultaneously in strong acidic electrolytes is still a major challenge. In this work, we report Co3O4@carbon core-shell nanoparticles on 2D graphite sheets (Co3O4@C-GS) as mixed-dimensional hybrid electrocatalysts for acidic OER. The obtained Co3O4@C-GS catalyst exhibits a low overpotential of 350 mV and maintains stability for 20 h at a current density of 10 mA cm-2 in H2SO4 (pH = 1) electrolyte. X-ray photoelectron and X-ray absorption spectroscopies illustrate that the higher content of Co3+ sites boosts acidic OER. Operando Raman spectroscopy reveals that the catalytic stability of Co3O4@C nanoparticles during the acidic OER is enhanced by the introduction of graphite sheets. This interface engineering of non-noble metal sites with high valence states provides an efficient approach to boost the catalytic activity and enhance the stability of noble-metal-free electrocatalysts for acidic OER.

Intrinsic room-temperature ferromagnetism in a two-dimensional semiconducting metal-organic framework.

The development of two-dimensional (2D) magnetic semiconductors with room-temperature ferromagnetism is a significant challenge in materials science and is important for the development of next-generation spintronic devices. Herein, we demonstrate that a 2D semiconducting antiferromagnetic Cu-MOF can be endowed with intrinsic room-temperature ferromagnetic coupling using a ligand cleavage strategy to regulate the inner magnetic interaction within the Cu dimers. Using the element-selective X-ray magnetic circular dichroism (XMCD) technique, we provide unambiguous evidence for intrinsic ferromagnetism. Exhaustive structural characterizations confirm that the change of magnetic coupling is caused by the increased distance between Cu atoms within a Cu dimer. Theoretical calculations reveal that the ferromagnetic coupling is enhanced with the increased Cu-Cu distance, which depresses the hybridization between 3d orbitals of nearest Cu atoms. Our work provides an effective avenue to design and fabricate MOF-based semiconducting room-temperature ferromagnetic materials and promotes their practical applications in next-generation spintronic devices.

Fast Modulation of d-Band Holes Quantity in the Early Reaction Stages for Boosting Acidic Oxygen Evolution.

Synthesis of highly active and durable oxygen evolution reaction (OER) catalysts applied in acidic water electrolysis remains a grand challenge. Here, we construct a type of high-loading iridium single atom catalysts with tunable d-band holes character (h-HL-Ir SACs, ∼17.2 wt % Ir) realized in the early OER operation stages. The in situ X-ray absorption spectroscopy reveals that the quantity of the d-band holes of Ir active sites can be fast increased by 0.56 unit from the open circuit to a low working potential of 1.35 V. More remarkably, in situ synchrotron infrared and Raman spectroscopies demonstrate the quick accumulation of *OOH and *OH intermediates over holes-modulated Ir sites in the early reaction voltages, achieving a rapid OER kinetics. As a result, this well-designed h-HL-Ir SACs exhibits superior performance for acidic OER with overpotentials of 216 mV @10 mA cm-2 and 259 mV @100 mA cm-2 , corresponding to a small Tafel slope of 43 mV dec-1 . The activity of catalyst shows no evident attenuation after 60 h operation in acidic environment. This work provides some useful hints for the design of superior acidic OER catalysts.

Engineering a local acid-like environment in alkaline medium for efficient hydrogen evolution reaction.

Tuning the local reaction environment is an important and challenging issue for determining electrochemical performances. Herein, we propose a strategy of intentionally engineering the local reaction environment to yield highly active catalysts. Taking Ptδ- nanoparticles supported on oxygen vacancy enriched MgO nanosheets as a prototypical example, we have successfully created a local acid-like environment in the alkaline medium and achieve excellent hydrogen evolution reaction performances. The local acid-like environment is evidenced by operando Raman, synchrotron radiation infrared and X-ray absorption spectroscopy that observes a key H3O+ intermediate emergence on the surface of MgO and accumulation around Ptδ- sites during electrocatalysis. Further analysis confirms that the critical factors of the forming the local acid-like environment include: the oxygen vacancy enriched MgO facilitates H2O dissociation to generate H3O+ species; the F centers of MgO transfers its unpaired electrons to Pt, leading to the formation of electron-enriched Ptδ- species; positively charged H3O+ migrates to negatively charged Ptδ- and accumulates around Ptδ- nanoparticles due to the electrostatic attraction, thus creating a local acidic environment in the alkaline medium.

Observation on the effect of periodontal treatment on patients with combined periodontal-pulpal lesions.

OBJECTIVE: To evaluate the effect of periodontal treatment on combined periodontal-pulpal lesions. METHODS: A total of 327 patients with periodontal-pulpal lesions (360 affected teeth) were selected, and all affected teeth were treated with a complete root canal, and assigned into group A (periodontal treatment group, 180 affected teeth) and group B (non-periodontal treatment group, 180 affected teeth). Group A received periodontal basic treatment for 2 weeks after the completion of root canal treatment; 6 weeks later, if there were still more than 5 mm periodontal pockets and bleeding after detection, flap treatment was performed. Group B received root canal treatment and supragingival scaling. Follow-up was conducted at 3, 6, 12 and 24 months after surgery by observing the periodontal depth (PD), alveolar bone resorption and tooth mobility (TM). RESULT: In group A, the PDs before operation and 2 years after operation were (5.966±1.877) mm and (5.133±1.935) mm, and the PD was significantly decreased. In group B, the PDs before operation and 2 years after operation were (5.533±1.856) mm and (6.167±1.927) mm, and the PD was increased. There was no statistical difference in preoperative TM between the two groups (P>0.05). Two years after operation, TM in group A was significantly lower than that in group B (P<0.05). In terms of X-ray performance, there was no significant change in alveolar bone resorption in group A two years after operation compared with that before operation (P>0.05); two years after operation, alveolar bone resorption in group B was significantly reduced compared with that before operation (P<0.05). CONCLUSION: Periodontal treatment is a promising technique for patients with combined periodontal-pulpal lesions.

In-situ spectroscopic observation of dynamic-coupling oxygen on atomically dispersed iridium electrocatalyst for acidic water oxidation.

Uncovering the dynamics of active sites in the working conditions is crucial to realizing increased activity, enhanced stability and reduced cost of oxygen evolution reaction (OER) electrocatalysts in proton exchange membrane electrolytes. Herein, we identify at the atomic level potential-driven dynamic-coupling oxygen on atomically dispersed hetero-nitrogen-configured Ir sites (AD-HN-Ir) in the OER working conditions to successfully provide the atomically dispersed Ir electrocatalyst with ultrahigh electrochemical acidic OER activity. Using in-situ synchrotron radiation infrared and X-ray absorption spectroscopies, we directly observe that one oxygen atom is formed at the Ir active site with an O-hetero-Ir-N4 structure as a more electrophilic active centre in the experiment, which effectively promotes the generation of key *OOH intermediates under working potentials; this process is favourable for the dissociation of H2O over Ir active sites and resistance to over-oxidation and dissolution of the active sites. The optimal AD-HN-Ir electrocatalyst delivers a large mass activity of 2860 A gmetal-1 and a large turnover frequency of 5110 h-1 at a low overpotential of 216 mV (10 mA cm-2), 480-510 times larger than those of the commercial IrO2. More importantly, the AD-HN-Ir electrocatalyst shows no evident deactivation after continuous 100 h OER operation in an acidic medium.

Identification of the Active-Layer Structures for Acidic Oxygen Evolution from 9R-BaIrO3 Electrocatalyst with Enhanced Iridium Mass Activity.

Iridium-based perovskites show promising catalytic activity for oxygen evolution reaction (OER) in acid media, but the iridium mass activity remains low and the active-layer structures have not been identified. Here, we report highly active 1 nm IrOx particles anchored on 9R-BaIrO3 (IrOx/9R-BaIrO3) that are directly synthesized by solution calcination followed by strong acid treatment for the first time. The developed IrOx/9R-BaIrO3 catalyst delivers a high iridium mass activity (168 A gIr-1), about 16 times higher than that of the benchmark acidic OER electrocatalyst IrO2 (10 A gIr-1), and only requires a low overpotential of 230 mV to reach a catalytic current density of 10 mA cm-2geo. Careful scanning transmission electron microscopy, synchrotron radiation-based X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analyses reveal that, during the electrocatalytic process, the initial 1 nm IrOx nanoparticles/9R-BaIrO3 evolve into amorphous Ir4+OxHy/IrO6 octahedrons and then to amorphous Ir5+Ox/IrO6 octahedrons on the surface. Such high relative content of amorphous Ir5+Ox species derived from trimers of face-sharing IrO6 octahedrons in 9R-BaIrO3 and the enhanced metallic conductivity of the Ir5+Ox/9R-BaIrO3 catalyst are responsible for the excellent acidic OER activity. Our results provide new insights into the surface active-layer structure evolution in perovskite electrocatalysts and demonstrate new approaches for engineering highly active acidic OER nanocatalysts.

Intrinsic Room-Temperature Ferromagnetism in V2C MXene Nanosheets.

Two-dimensional (2D) materials with intrinsic magnetic properties are intensively explored due to their potential applications in low-power-consumption electronics and spintronics. To date, only a handful of intrinsic magnetic 2D materials have been reported. Here, we report a realization of intrinsic ferromagnetic behavior in 2D V2C MXene nanosheets through layer mismatch engineering. The V2C MXene nanosheets with a small-angle twisting show a robust intrinsic ferromagnetic response with a saturation magnetic moment of 0.013 emu/g at room temperature. An in-depth study has been performed by X-ray absorption spectroscopy as well as electron paramagnetic resonance (EPR) and photoelectron spectroscopy analyses. It has been revealed that the symmetry-broken interlayer twisting reduced the degeneracy of V 3d states and the van Hove singularity. This led to a redistribution of the density of electronic states near the Fermi level and consequently activated the Stoner ferromagnetism with improved density of itinerant d electrons. This work highlights V2C MXene as a promising intrinsic room-temperature ferromagnetic material with potential applications in spintronics or spin-based electronics.

Embedding atomic cobalt into graphene lattices to activate room-temperature ferromagnetism.

Graphene is extremely promising for next-generation spintronics applications; however, realizing graphene-based room-temperature magnets remains a great challenge. Here, we demonstrate that robust room-temperature ferromagnetism with TC up to ∼400 K and saturation magnetization of 0.11 emu g-1 (300 K) can be achieved in graphene by embedding isolated Co atoms with the aid of coordinated N atoms. Extensive structural characterizations show that square-planar Co-N4 moieties were formed in the graphene lattices, where atomically dispersed Co atoms provide local magnetic moments. Detailed electronic structure calculations reveal that the hybridization between the d electrons of Co atoms and delocalized pz electrons of N/C atoms enhances the conduction-electron mediated long-range magnetic coupling. This work provides an effective means to induce room-temperature ferromagnetism in graphene and may open possibilities for developing graphene-based spintronics devices.