RESUMO
Asthma is a global chronic airway disease. The expression and role of RNF125, an E3 ubiquitin ligase, in asthma remain uncertain. In this study, we revealed that RNF125 was downregulated in the bronchial epithelium of mice and patients with asthma. Rnf125 hypermethylation was responsible for the low expression of RNF125 in primary airway epithelial cells of mice treated with OVA. Moreover, we demonstrated that RNF125 could attenuate autophagy, oxidative stress, and protect epithelial barrier in vivo and in vitro. Additionally, we identified HMGB1 as a substrate of RNF125, which interacted with the HMG B-box domain of HMGB1 and induced degradation via the ubiquitin proteasome system, reducing autophagy and oxidative stress. Overall, our findings elucidated that hypermethylation of Rnf125 reduced its expression, which promoted autophagy-induced oxidative stress in asthma by increasing HMGB1 stability. These findings offer a theoretical and experimental basis for the pathogenesis of asthma.
RESUMO
Nanocellulose aerogel has the advantages of porosity, low density and high specific surface area, which can effectively realize the adsorption and treatment of wastewater waste gas. The methods of preparing nanocellulose mainly include mechanical, chemical and biological methods. Nanocellulose is formed into nanocellulose aerogel after gelation, solvent replacement and drying processes. Based on the advantages of easy modification of nanocellulose aerogels, nanocellulose aerogels can be functionalized with conductive fillers, reinforcing fillers and other materials to give nanocellulose aerogels in electrical, mechanical and other properties. Through functionalization, the properties of nanocellulose composite aerogel such as hydrophobicity and adsorption are improved, and the aerogel is endowed with the ability of electrical conductivity and electromagnetic shielding. Through functionalization, the applicability and general applicability of nanocellulose composite aerogel in the field of environmental protection are improved. In this paper, the preparation and functional modification methods of nanocellulose aerogels are reviewed, and the application prospects of nanocellulose composite aerogels in common environmental protection fields such as dye adsorption, heavy metal ion adsorption, gas adsorption, electromagnetic shielding, and oil-water separation are specifically reviewed, and new solutions are proposed.
Assuntos
Celulose , Conservação dos Recursos Naturais , Celulose/química , Metais , Porosidade , SolventesRESUMO
Metal-organic framework (MOF) membranes exhibit immense potential for separation applications due to their regular pore channels and scalable pore sizes. However, structuring a flexible and high-quality MOF membrane remains a challenge due to its brittleness, which severely restricts its practical application. This paper presents a simple and effective method in which continuous, uniform, defect-free ZIF-8 film layers of tunable thickness are constructed on the surface of inert microporous polypropylene membranes (MPPM). To provide heterogeneous nucleation sites for ZIF-8 growth, an extensive amount of hydroxyl and amine groups were introduced on the MPPM surface using the dopamine-assisted co-deposition technique. Subsequently, ZIF-8 crystals were grown in-situ on the MPPM surface using the solvothermal method. The resultant ZIF-8/MPPM exhibited a lithium-ion permeation flux of 0.151 mol m-2 h-1 and a high selectivity of Li+/Na+ = 1.93, Li+/Mg2+ = 11.50. Notably, ZIF-8/MPPM has good flexibility, and the lithium-ion permeation flux and selectivity remain unchanged at a bending curvature of 348 m-1. These excellent mechanical characteristics are crucial for the practical applications of MOF membranes.
RESUMO
The performance of a Ce(III)-4,4',4â³-((1,3,5-triazine-2,4,6-triyl) tris (azanediyl)) tribenzoic acid-organic framework (Ce-H3TATAB-MOFs) for capturing excess fluoride in aqueous solutions and its subsequent defluoridation was investigated in depth. The optimal sorption capacity was obtained with a metal/organic ligand molar ratio of 1:1. The morphological characteristics, crystalline shape, functional groups, and pore structure of the material were analyzed via SEM, XRD, FTIR, XPS, and N2 adsorption-desorption experiments, and the thermodynamics, kinetics, and adsorption mechanism were elucidated. The influence of pH and co-existing ions for defluoridation performance were also sought. The results show that Ce-H3TATAB-MOFs is a mesoporous material with good crystallinity, and that quasi-second kinetic and Langmuir models can describe the sorption kinetics and thermodynamics well, demonstrating that the entire sorption process is a monolayer-governed chemisorption. The Langmuir maximum sorption capacity was 129.7 mg g-1 at 318 K (pH = 4). The adsorption mechanism involves ligand exchange, electrostatic interaction, and surface complexation. The best removal effect was reached at pH 4, and a removal effectiveness of 76.57% was obtained under strongly alkaline conditions (pH 10), indicating that the adsorbent has a wide range of applications. Ionic interference experiments showed that the presence of PO43- and H2PO4- in water have an inhibitory effect on defluoridation, whereas SO42-, Cl-, CO32-, and NO3- are conducive to the adsorption of fluoride due to the ionic effect.
RESUMO
With the increasing pollution of electromagnetic (EM) radiation, it is necessary to develop low-cost, renewable electromagnetic interference (EMI) shielding materials. Herein, wood-derived carbon (WC) materials for EMI shielding are prepared by one-step carbonization of renewable wood. With the increase in carbonization temperature, the conductivity and EMI performance of WC increase gradually. At the same carbonization temperature, the denser WC has better conductivity and higher EMI performance. In addition, due to the layered superimposed conductive channel structure, the WC in the vertical-section shows better EMI shielding performance than that in the cross-section. After excluding the influence of thickness and density, the specific EMI shielding effectiveness (SSE/t) value can be calculated to further optimize tree species. We further discuss the mechanism of the influence of the microstructure of WC on its EMI shielding properties. In addition, the lightweight WC EMI material also has good hydrophobicity and heat insulation properties, as well as good mechanical properties.
RESUMO
Wooden building materials have advantages in terms of biodegradability, non-toxicity, pollution-free and recycling. Currently, applications of natural wood are extremely limited because of low density, low strength and toughness. Therefore, we reported an effective modification strategy with nano-scale cellulose nanofibrils design to prepare a synergistically enhanced cellulosic material. Via three steps: i) the secondary alcohol hydroxyl groups in C2, C3 position were cut; ii) oxidize the hydroxyl group at C2, C3 position to achieve dialdehyde cellulose; and iii) oxidized again to obtain dicarboxylic cellulose. Subsequently, thanks to the regulation of the average moisture content, the moisture content in the wood surface and subsurface increased in a short time. The wood softening layer contributes to the hotpressing treatment of the wood. The mechanical properties and dimensionality have been greatly improved. The obtained delignified oxidated hot-pressed wood with 0.55 mmol/g carboxyl group content demonstrates excellent strength of 328.8 ± 7.43 MPa and Young's modulus of 8.1 ± 0.14 GPa, which is twice than that of natural wood. Delignified oxidated hot-pressed wood also shows exceptional toughness of 8.3 ± 0.28 MJ/m3. Other than that, the shore hardness indicates 0.55 mmol/g carboxylic group, which could increase the hardness at the wood surface hardness to 72.5 ± 4.29°.
Assuntos
Celulose , Madeira , DurezaRESUMO
Asthma is a chronic inflammatory disease characterized by airway remodeling and lung inflammation. Collagen triple helix repeat containing 1 (CTHRC1), a glycoprotein, is involved in multiple pathological processes, including inflammation and fibrosis. However, the function of CTHRC1 in asthma remains unclear. In the present study, the mouse asthma model was successfully generated by sensitizing and challenging mice with ovalbumin (OVA). CTHRC1 expression at both RNA and protein levels was significantly upregulated in lung tissues of asthmatic mice. Asthmatic mice exhibited significant airway remodeling as evidenced by increased bronchial wall and smooth muscle cell layer thickness, goblet cell hyperplasia and collagen deposition, and epithelial-mesenchymal transition (EMT), but those characteristics were reversed by CTHRC1 silencing. The cell model with transforming growth factor-ß1 (TGF-ß1) induction in bronchial epithelial cells (BEAS-2B) was conducted to verify the effects of CTHRC1 on EMT, a classic mechanism that mediates airway remodeling. The results showed that TGF-ß1 stimulation increased CTHRC1 expression, and CTHRC1 knockdown inhibited TGF-ß1-induced EMT. OVA-treated mice also showed increased inflammatory cell infiltration and the production of OVA-specific immunoglobulin E (IgE), interleukin (IL)-4, IL-5, and IL-13, which were decreased by CTHRC1 downregulation. The effects of CTHRC1 on OVA-induced airway inflammation were further determined by treating BEAS-2B cells with IL-13, in which CTHRC1 knockdown reduced the IL-13-induced secretion of pro-inflammatory factors, including IL-4 and IL-5. In conclusion, these results indicate that CTHRC1 silencing attenuates asthmatic airway remodeling and inflammation in vivo and in vitro, suggesting that CTHRC1 may be a potential target for asthma treatment.
Assuntos
Asma , Fator de Crescimento Transformador beta1 , Camundongos , Animais , Fator de Crescimento Transformador beta1/metabolismo , Remodelação das Vias Aéreas , Interleucina-13 , Interleucina-5 , Asma/metabolismo , Inflamação/induzido quimicamente , Colágeno/metabolismo , Ovalbumina/efeitos adversos , Modelos Animais de Doenças , Camundongos Endogâmicos BALB CRESUMO
To promote the bone repair ability of drug-loaded scaffolds, poly(lactic acid) (PLA)/graphene oxide (GO)/Salvianolic acid B (Sal-B)/aspirin (ASA) dual drug-loaded biomimetic composite scaffolds were prepared. The results showed that the addition of these two drugs delayed the gel formation of the composite system, but a biomimetic nanofiber structure could still be obtained by extending the gel time. The addition of Sal-B increased the hydrophilicity of the scaffold, while an increase in ASA reduced the porosity. Dual drug-loaded scaffolds had good haemocompatibility and synergically promoted the proliferation of MC3T3-E1 cells and enhanced alkaline phosphatase activity. Sustained-release experiments of the two drugs showed that the presence of ASA slowed the cumulative release of Sal-B, while Sal-B promoted the release of ASA. Kinetic modeling showed that the release of both drugs conforms to the Korsmeyer-Peppas model, but Sal-B conforms to the Fick diffusion mechanism and ASA follows Fick diffusion and carrier swelling/dissolution.
RESUMO
The occurrence of fluoride contamination in drinking water has gained substantial concern owing to its serious threat to human health. Traditional adsorbents have shortcomings such as low adsorption capacity and poor selectivity, so it is urgent to develop new adsorbents with high adsorption capacity, renewable and no secondary pollution. In this work, magnetic electrospun La-Mn-Fe tri-metal oxide nanofibers (LMF NFs) for fluoride recovery were developed via electrospinning and heat treatment, and its defluoridation property was evaluated in batch trials. Modern analytical tools (SEM, BET, XRD, FTIR) were adopted to characterize the properties of the optimized adsorbent, i.e., LMF11 NFs with a La:Mn molar ratio of 1:1. The surface area calculated via BET method and pHpzc assessed using pH drift method of LMF11 NFs were 55.81 m2 g-1 and 6.47, respectively. The results indicated that the adsorption amount was highly dependent on the pH of the solution, and reached the highest value at pH = 3. The kinetic behavior of defluoridation on LMF11 NFs was dominated by the PSO model with the highest fitted determination coefficients of 0.9999. Compared with the other three isotherm models, the Langmuir model described defluoridation characteristics well with larger correlation coefficients of 0.9997, 0.9990, 0.9987 and 0.9976 at 15 °C, 25 °C, 35 °C and 45 °C, respectively. The optimized LMF11 NFs exhibited superior monolayer defluoridation capacities for 173.30-199.60 mg F-/g at pH 3 at 15-45 °C according to the Langmuir isotherm model. A thermodynamic study proved that the defluoridation by LMF11 NFs is a spontaneous, endothermic along with entropy increase process. In addition, the LMF11 NFs still showed high defluoridation performance after three reused cycles. These findings unveil that the synthesized LMF11 NFs adsorbent is a good adsorbent for fluoride remediation from wastewater owing to its low cost, high defluoridation performance and easy operation.
RESUMO
A La-based adsorbent was prepared with La(NO3)3·6H2O, 2-methylimidazole and DMF via amide-hydrolysis and used for fluoride decontamination from aqueous water. The obtained adsorbent was lanthanum methanoate (La(COOH)3). The effects of pH value, initial F- concentration and interfering ions on defluoridation properties of as-prepared La(COOH)3 were assessed through batch adsorption tests. The adsorption kinetics, isotherm models and thermodynamics were employed to verify the order, nature and feasibility of La(COOH)3 towards fluoride removal. The results imply that La(COOH)3 is preferable for defluoridation over a wide pH range of 2 to 9 without interference. Simultaneously, the defluoridation process of La(HCOO)3 accords to the pseudo-second order model and Langmuir isotherm, revealing chemical adsorption is the main control step. The maximum fluoride capture capacities of La(COOH)3 at 30, 40 and 50 °C are 245.02, 260.40 and 268.99 mg g-1, respectively. The mechanism for defluoridation by La(COOH)3 was revealed by PXRD and XPS. To summarize, the as-synthesized La based adsorbent could serve as a promising adsorbent for defluoridation from complex fluoride-rich water.
RESUMO
Biomimetic scaffolds loaded with drugs can improve the osteogenesis and neovascularisation of scaffolds. A series of PLA/GO/Sal-B drug-loaded scaffolds was prepared by thermally induced phase separation. The addition of Sal-B increased the diameter of the fibres, but the scaffold showed a porous nanofibrous structure after drug release. X-ray diffraction results showed that the addition of Sal-B did not affect the formation of the nanofibre biomimetic structure of the scaffold. FTIR results indicated a certain interaction between Sal-B and PLA/GO. Water absorption and porosity test results revealed that the scaffolds had good hydrophilicity and appropriate porosity. The addition of Sal-B was also conducive to the formation of sediments possibly due to the good water solubility of Sal-B itself. The prepared scaffolds had good blood compatibility and cytocompatibility, and a small additional amount of Sal-B could significantly promote cell proliferation and alkaline phosphatase activity. Their sustained release performance indicated that the biomimetic scaffolds had controlled the release of Sal-B. The kinetic model showed that the PLA/GO/Sal-B drug-loaded biomimetic scaffolds followed the diffusion mechanism.
RESUMO
The possibility to precisely control important properties of nanoparticles (NPs) such as their size, morphology, surface charge, or doping content is crucial for enhancing the performance of existing solutions beyond the state-of-the-art and for enabling novel applications. In this work, custom-tailored Znx Fe3- x O4 NPs are synthesized at different Zn doping concentrations to augment and expand their usefulness for high-performance applications in nanomedicine. By precisely increasing the Zn2+ content in the range of 0 ≤ x ≤ 2.0, the discussed NPs can sequentially acquire valuable properties enabling magnetic resonance imaging, near-infrared (NIR) photothermal effects, NIR photocatalytic and photoelectric effects, depending on the variation of substitution position of the Zn2+ in the magnetite structure and the emergence of a ZnO/ZnFe2 O4 heterostructure at high doping concentrations. The presented work demonstrates and explainsa facile route for the synthesis and modulation of multifunctional nanomaterials with manifold roles in disease diagnostics and therapy, and provides helpful guidance in designing divalent transition metal ion-doped nanomaterials.
Assuntos
Nanopartículas , Óxido de Zinco , Óxido Ferroso-Férrico/química , Zinco , Nanopartículas/química , Imageamento por Ressonância MagnéticaRESUMO
Photocatalytic degradation method has been recognized as an effective way to eliminate the contamination of environment. However, developing photocatalysts with excellent photocatalytic properties are still a big challenge. In this paper, Ag doped ZnO coating with a layer of N doped porous carbon (Ag/ZnO@N-carbon) was successfully synthesized by using polyvinyl pyrrolidone (PVP) modified ZIF-8 as precursor via adsorption, hydrothermal treatment, in situ growth and carbonization processes. The physical and chemical properties of all samples were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), electron transmission microscopy (TEM) and so on. The results show that Ag doping does not change the crystallinity of ZnO, but broaden its photo-response property. The coating of N doped carbon can improve the specific surface area of photocatalyst. The photocatalytic activity of all samples was evaluated by degradation of rhodamine B (RhB) solution under UV light irradiation for 25 min. Ag/ZnO@N-carbon exhibits the highest photocatalytic activity for degradation of RhB with a degradation of 98.65%. Furthermore, Ag/ZnO@N-carbon also has high stability. Based on the characterization, possible mechanism for degradation of RhB by Ag/ZnO@N-carbon under UV light irradiation was proposed.
RESUMO
The formation of self-cleaning functions on silicone elastomers is crucial for practical applications but still challenging. In this study, superhydrophobic silicone elastomers (SHSEs) with a 3D-hierarchical microstructure were achieved during the curing process with the assistance of a homemade template. The micro-nano structure formed by the assistance of the template makes the silicone elastomer surface achieve robust superhydrophobicity with a WCA at â¼163°, which can easily self-clean, removing surface contamination. Also, TiO2 particles transferred from the template endow the surface with photocatalytic functions, which can degrade organic pollutants under UV irradiation. After sandpaper abrasion, the formed SHSE can maintain its excellent hydrophobicity and show liquid repellency to wine and coffee droplets. The SHSEs with self-cleaning functions have promising applications in water treatment, medical facilities, and wearable devices.
RESUMO
The absence of effective therapeutic targets and tumor hypoxia are the main causes of failure in the treatment of triple-negative breast cancer (TNBC). Biomimetic nanotechnology and tumor microenvironment (TME) responsiveness bring hope and opportunity to address this problem. Here, we develop a core membrane nanoplatform (HM/D-I-BL) using hollow mesoporous manganese dioxide (HM) coated with a biomimetic cancer cell membrane for enhanced chemotherapy/phototherapy via the strategy of precise drug delivery and hypoxia amelioration. Cancer cell membrane modification endows HM/D-I-BL with excellent homologous targeting and immune escape performance. Cellular uptake and fluorescence imaging studies confirmed that HM/D-I-BL can be accurately delivered to tumor sites. HM/D-I-BL also features efficient in situ O2 generation in tumors upon laser irradiation, and subsequently enhanced chemotherapy/phototherapy, pointing to its usefulness as a TME-responsive nanozyme to alleviate tumor hypoxia in the presence of H2O2. In addition, HM/D-I-BL showed good fluorescence and magnetic resonance imaging performances, which offers a reliable multimodal image-guided combination tumor therapy for precision theranostics in the future. In general, this intelligent biomimetic nanoplatform with its homotypic tumor targeting, in situ alleviation of tumor hypoxia and synergetic chemophototherapy would open up a new dimension for the precision treatment of TNBC.
Assuntos
Nanopartículas , Fotoquimioterapia , Neoplasias de Mama Triplo Negativas , Linhagem Celular Tumoral , Sistemas de Liberação de Medicamentos , Humanos , Peróxido de Hidrogênio/farmacologia , Fototerapia , Neoplasias de Mama Triplo Negativas/tratamento farmacológico , Microambiente TumoralRESUMO
The cost-effective synthesis of flexible energy storage devices with high energy and power densities is a challenge in wearable electronics. Here, we report a facile, efficient, and scalable approach for preparing three-dimensional (3D) laser-induced graphene foam (Co3O4@LIG) embedded with porous Co3O4 nanocrystals using a CO2 infrared laser. The in situ formed Co3O4@LIG nanocomposites directly serve as active materials, current collectors, and the conductive substrate for micro-supercapacitors (MSCs). Benefiting from rational structural features, the MSC based on Co3O4@LIG nanocomposites (Co3O4@LIG-MSC) with an interdigitated electrode configuration exhibits excellent electrochemical performance, including a high specific capacitance (143.5 F g-1), excellent rate capability, high energy density (19.9 W h kg-1 at a power density of 0.5 W kg-1), and remarkable power density (15.0 W kg-1 at an energy density of 15.8 W h kg-1). Furthermore, the device possesses good stability under different bending diameters and cycling stability. Such a highly integrated flexible MSC with high energy and power densities made by a directly laser scribing strategy has some potential for the fabrication of wearable energy storage devices.
RESUMO
The development of high-performance multifunctional electrocatalysts operating in the same electrolyte is key to reduce the material and process costs of renewable energy conversion and storage devices. Herein, the fabrication of freestanding integral electrodes by combining multivariate electrospinning with surface metal organic framework functionalization to arrest pyrolytic emissions from fiber interior is reported, resulting in the expression of rich active sites with controlled composition, for example, the tunable Co-P coordination. The as-fabricated electrode of CoP@CF-900, when used as both the cathode and anode for overall water splitting, is able to deliver 200 mA cm-2 at a cell voltage of 1.89 V, significantly outshining the Pt/CâRuO2 couple; when used as the air cathode for a zinc-air battery, is able to operate more than 150 h at 10 mA cm-2 with a nearly constant round-trip energy efficiency of ≈60%, also outperforming the Pt/C+RuO2 benchmark. The activity and kinetics origin of the superb multi-functionality is further elucidated through extensive electroanalytical, post-mortem, and operando characterizations, which underscore the construction of robust integral electrodes through synergistic structure and composition engineering.
Assuntos
Fontes de Energia Elétrica , Eletrólitos , Domínio Catalítico , Eletrodos , ZincoRESUMO
Seeking candidate photocatalysts for photocatalytic water splitting, via visible light, is of great interest and importance. In this study, we have comprehensively explored the crystal structures, electronic properties, and optical absorbance of two-dimensional (2D) Sc2CT2 (T = F, Cl, Br) MXenes and their corresponding photocatalytic water splitting, under the visible-light region, by first-principles calculations. Herein, we have proposed that 2D Sc2CT2 MXenes can be fabricated from their layered bulk compounds, alternatively to the traditional chemical etching method. Creatively, we proposed Sc2CT2 (T = F, Br) as new materials; the band edge alignments of Sc2CF2 can be tuned to meet the water redox potentials at pH = 8.0. It is highlighted that Sc2CF2 shows outstanding optical spectra harvested under visible-light wavelength regions, and efficient separation of photo-induced electrons and holes in different zones. These present results provide eloquent evidence and open a new door on the photocatalysis applications of such novel semiconducting MXenes.
RESUMO
Emerging evidence has suggested the functions of exosomes in allergic diseases including asthma. By using a mouse model with asthma induced by ovalbumin (OVA), we explored the roles of M2 macrophage-derived exosomes (M2Φ-Exos) in asthma progression. M2Φ-Exos significantly alleviated OVA-induced fibrosis and inflammatory responses in mouse lung tissues, as well as inhibited abnormal proliferation, invasion, and fibrosis-related protein production in platelet derived growth factor (PDGF-BB) treated primary mouse airway smooth muscle cells (ASMCs). The OVA administration in mice or the PDGF-BB treatment in ASMCs reduced the expression of miR-370, which was detected in M2Φ-Exos by miRNA sequencing. However, treating the mice or ASMCs with M2Φ-Exos reversed the inhibitory effect of OVA or PDGF-BB on miR-370 expression. We identified that the target of miR-370 was fibroblast growth factor 1 (FGF1). Downregulation of miR-370 by Lv-miR-370 inhibitor or overexpression of FGF1 by Lv-FGF1 blocked the protective roles of M2Φ-Exos in asthma-like mouse and cell models. M2Φ-Exos were found to inactivate the MAPK signaling pathway, which was recovered by miR-370 inhibition or FGF1 overexpression. Collectively, we conclude that M2Φ-Exos carry miR-370 to alleviate asthma progression through downregulating FGF1 expression and the MAPK/STAT1 signaling pathway. Our study may offer a novel insight into asthma treatment.
Assuntos
Asma/genética , Fator 1 de Crescimento de Fibroblastos/genética , Regulação da Expressão Gênica , Macrófagos Alveolares/metabolismo , MicroRNAs/genética , Quinases de Proteína Quinase Ativadas por Mitógeno/genética , Fator de Transcrição STAT1/genética , Animais , Asma/metabolismo , Asma/patologia , Proliferação de Células , Células Cultivadas , Modelos Animais de Doenças , Regulação para Baixo , Exossomos/genética , Exossomos/metabolismo , Fator 1 de Crescimento de Fibroblastos/biossíntese , Macrófagos Alveolares/patologia , Camundongos , Camundongos Endogâmicos C57BL , MicroRNAs/biossíntese , Quinases de Proteína Quinase Ativadas por Mitógeno/biossíntese , Miócitos de Músculo Liso/metabolismo , Miócitos de Músculo Liso/patologia , Fator de Transcrição STAT1/biossíntese , Transdução de SinaisRESUMO
Asthma is a chronic airway disease that causes excessive inflammation, oxidative stress, mucus production and bronchial epithelial cell apoptosis. Fructose-1,6-bisphosphatase (Fbp1) is one of the rate-limiting enzymes in gluconeogenesis and plays a critical role in several cancers. However, its role in inflammatory diseases, such as asthma, is unclear. Here, we examined the expression, function and mechanism of action of Fbp1 in asthma. Gene Expression Omnibus (GEO) data sets revealed that Fbp1 was overexpressed in a murine model of asthma and in interleukin (IL)-4- or IL-13-stimulated bronchial epithelial cells. We confirmed the findings in an animal model as well as Beas-2B and 16HBE cells. In vitro investigations revealed that silencing of Fbp1 reduced apoptosis and the proportion of cells in the G2/M phase, whereas overexpression led to increases. Fbp1 knock-down inhibited oxidative stress by activating the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway, whereas Fbp1 overexpression aggravated oxidative stress by suppressingthe Nrf2 pathway. Moreover, the Nrf2 pathway inhibitor ML385 reversed the changes caused by Fbp1 inhibition in Beas-2B and 16HBE cells. Collectively, our data indicate that Fbp1 aggravates oxidative stress-induced apoptosis by suppressing Nrf2 signalling, substantiating its potential as a novel therapeutic target in asthma.