Projected performance of Si- and 2D-material-based SRAM circuits ranging from 16 nm to 1 nm technology nodes.

Researchers have been developing 2D materials (2DM) for electronics, which are widely considered a possible replacement for silicon in future technology. Two-dimensional transition metal dichalcogenides are the most promising among the different materials due to their electronic performance and relatively advanced development. Although field-effect transistors (FETs) based on 2D transition metal dichalcogenides have been found to outperform Si in ultrascaled devices, the comparison of 2DM-based and Si-based technologies at the circuit level is still missing. Here we compare 2DM- and Si FET-based static random-access memory (SRAM) circuits across various technology nodes from 16 nm to 1 nm and reveal that the 2DM-based SRAM exhibits superior performance in terms of stability, operating speed and energy efficiency when compared with Si SRAM. This study utilized technology computer-aided design to conduct device and circuit simulations, employing calibrated MoS2 nFETs and WSe2 pFETs. It incorporated layout design rules across various technology nodes to comprehensively analyse their SRAM functionality. The results show that, compared with three-dimensional structure Si transistors at 1 nm node, the planar 2DMFETs exhibited lower capacitance, leading to reduced cell read access time (-16%), reduced time to write (-72%) and lowered dynamic power (-60%). The study highlights the provisional benefits of using planar 2DM transistors to mitigate the performance degradation caused by reduced metal pitch and increased wire resistance in advanced nodes, potentially opening up exciting possibilities for high-performance and low-power circuit applications.

2D Materials-Based Static Random-Access Memory.

2D transition-metal dichalcogenide semiconductors, such as MoS2 and WSe2 , with adequate bandgaps are promising channel materials for ultrascaled logic transistors. This scalability study of 2D material (2DM)-based field-effect transistor (FET) and static random-access memory (SRAM) cells analyzing the impact of layer thickness reveals that the monolayer 2DM FET with superior electrostatics is beneficial for its ability to mitigate the read-write conflict in an SRAM cell at scaled technology nodes (1-2.1 nm). Moreover, the monolayer 2DM SRAM exhibits lower cell read access time and write time than the bilayer and trilayer 2DM SRAM cells at fixed leakage power. This simulation predicts that the optimization of 2DM SRAM designed with state-of-the-art contact resistance, mobility, and equivalent oxide thickness leads to excellent stability and operation speed at the 1-nm node. Applying the nanosheet (NS) gate-all-around (GAA) structure to 2DM further reduces cell read access time and write time and improves the area density of the SRAM cells, demonstrating a feasible scaling path beyond Si technology using 2DM NSFETs. In addition to the device design, the process challenges for 2DM NSFETs, including the cost-effective stacking of 2DM layers, formation of electrical contacts, suspended 2DM channels, and GAA structures, are also discussed.