Selective Characterization of Olefins by Paternò-Büchi Reaction with Ultrahigh Resolution Mass Spectrometry.

Petroleum olefins play important roles in various secondary processing procedures and are important feedstocks for the modern organic chemical industry. It is quite challenging to analyze petroleum olefins beyond the gas chromatography (GC)-able range using mass spectrometry (MS) due to the difficulty of soft ionization and the matrix complexity. In this work, a Paternò-Büchi (PB) reaction combined with atmospheric pressure chemical ionization and ultrahigh resolution mass spectrometry (APCI-UHRMS) was developed for selective analysis of olefins. Through the PB reaction, C═C bonds were transformed into four-membered rings of oxetane with improved polarity so that soft ionization of olefins could be achieved. The systematic optimization of PB reaction conditions, as well as MS ionization conditions, ensured a high reaction yield and a satisfied MS response. Furthermore, a sound scheme was set up to discriminate the coexisting unsaturated alkanes in complex petroleum, including linear olefins, nonlinear olefins, cycloalkanes, and aromatics, making use of their different behaviors during the PB reaction and chemical ionization. The developed strategy was successfully applied to the analysis of olefins in fluid catalytic cracking oil slurry, a complex heavy oil sample. This method extended the characterization of petroleum olefins from lower to higher with high efficiency and selectivity to provide a comprehensive molecular library for heavy petroleum samples and process optimization.

An Ultra-Thin MXene Film for Multimodal Sensing of Neuroelectrical Signals with Artifacts Removal.

Neuroelectrical signals transmitted onto the skin tend to decay to an extremely weak level, making them highly susceptible to interference from the environment and body movement. Meanwhile, for comprehensively understanding cognitive nerve conduction, multimodal sensing of neural signals, such as magnetic resonance imaging (MRI) and functional near-infrared spectroscopy (fNIRS), is highly required. Previous metal or polymer conductors cannot either provide a seamless on-skin feature for accurate sensing of neuroelectrical signals or be compatible with multimodal imaging techniques without opto- and magnet- artifacts. Herein, a ≈20 nm thick MXene film that is able to simultaneously detect electrophysiological signals and perform imaging by MRI and fNIRS with high fidelity is reported. The ultrathin film is made of crosslinked Ti3 C2 Tx film via poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS), showing a record high electroconductivity and transparency combination (11 000 S cm-1 @89%). Among them, PEDOT: PSS not only plays a cross-linking role to stabilize MXene film but also shortens the interlayer distance for effective charge transfer and high transparency. Thus, it can achieve a low interfacial impedance with skin or neural surfaces for accurate recording of electrophysiological signals with low motion artifacts. Besides, the high transparency originating from the ultrathin feature leads to good compatibility with fNIRS and MRI without optical and magnetic artifacts, enabling multimodal cognitive neural monitoring during prolonged use.

Recent advances in mass spectrometry imaging of single cells.

Mass spectrometry imaging (MSI) is a sensitive, specific, label-free imaging analysis technique that can simultaneously obtain the spatial distribution, relative content, and structural information of hundreds of biomolecules in cells and tissues, such as lipids, small drug molecules, peptides, proteins, and other compounds. The study of molecular mapping of single cells can reveal major scientific issues such as the activity pattern of living organisms, disease pathogenesis, drug-targeted therapy, and cellular heterogeneity. Applying MSI technology to the molecular mapping of single cells can provide new insights and ideas for the study of single-cell metabolomics. This review aims to provide an informative resource for those in the MSI community who are interested in single-cell imaging. Particularly, we discuss advances in imaging schemes and sample preparation, instrumentation improvements, data processing and analysis, and 3D MSI over the past few years that have allowed MSI to emerge as a powerful technique in the molecular imaging of single cells. Also, we highlight some of the most cutting-edge studies in single-cell MSI, demonstrating the future potential of single-cell MSI. Visualizing molecular distribution at the single-cell or even sub-cellular level can provide us with richer cell information, which strongly contributes to advancing research fields such as biomedicine, life sciences, pharmacodynamic testing, and metabolomics. At the end of the review, we summarize the current development of single-cell MSI technology and look into the future of this technology.

Machine-learning assisted molecular formula assignment to high-resolution mass spectrometry data of dissolved organic matter.

High-resolution mass spectrometry (HRMS) provides molecular compositional information of dissolved organic matter (DOM) through isotopic assignment from the molecular mass. However, due to the inevitable deviation of molecular mass measurement and the limitation of resolving power, multiple possible solutions frequently occur for a given molecular mass. Lowering the mass deviation threshold and adding assignment restriction rules are often applied to exclude the incorrect solutions, which generally involves time-consuming manual post-processing of mass data. To improve the result accuracy in an automated manner, we developed a molecular formula assignment algorithm based on machine-learning technology. The method integrated a logistic regression model using manually corrected isotopic composition and the peak features of HRMS data (m/z, signal-to-noise ratio, isotope type, and number, etc.) as training data. The developed model can evaluate the correctness of a candidate formula for the given mass peak based on the peak features. The method was verified by various DOM samples FT-ICR MS data (direct infusion negative mode electrospray), achieving a ∼90% accuracy (compared to the traditional approach) for formula assignment. The method was applied to a series of NOM samples and showed a significant improvement in formula assignment compared with the mass matching method.

Rapid screening of polybrominated diphenyl ethers in water by solid-phase microextraction coupled with ultrahigh-resolution mass spectrometry.

Polybrominated diphenyl ethers (PBDEs) are considered emerging organic contaminants that attract more attention in the environment. Herein, online coupling of solid-phase microextraction and ultrahigh-resolution mass spectrometry was developed for rapid screening of eight PBDEs in water samples. This procedure was completed in 22 min, about 6 times faster than the routine workflow such as solid-phase extraction coupled with gas chromatography-mass spectrometry. Thermal desorption and solvent-assisted atmospheric pressure chemical ionization were developed for the effective coupling of solid-phase microextraction (SPME) with ultrahigh-resolution mass spectrometry (UHRMS), which contributed to the signal enhancement and made the methodology feasible for environmental screening. The limits of detection and quantification were 0.01-0.50 ng/mL and 0.05-4.00 ng/mL, respectively. The recoveries were 57.2-75.2% for quality control samples at spiking levels of 0.8-10 ng/mL (4-50 ng/mL for BDE209), with relative standard deviation less than 19.0%. Twelve water samples from different river sites near industrial areas were screened using the developed method. The results showed that BDE-209 was the dominant PBDE (1.02-1.28 ng/mL in positive samples), but its amount was lower than the human health ambient water quality criteria. Consequently, the developed method provides a rapid and reliable way of evaluating contamination status and risks of PBDEs in aqueous environment.

Ultra-fast screening of free fatty acids in human plasma using ion mobility mass spectrometry.

Free fatty acids are involved in many metabolic regulations in the human body. In this work, an ultra-fast screening method was developed for the analysis of free fatty acids using trapped ion mobility spectrometry coupled with mass spectrometry. Thirty-three free fatty acids possessing different unsaturation degrees and different carbon chain lengths were baseline separated and characterized within milliseconds. Saturated, monounsaturated, and polyunsaturated free fatty acids showed different linearities between collision cross-section values and m/z. The establishment of correlations between structures and collision cross-section values provided additional qualitative information and made it possible to determine free fatty acids which were out of the standards pool but possessed the confirmed linearity. The gas-phase separation made the quantitative analysis reliable and repeatable at a much lower time cost than chromatographic methods. The sensitivity was comparable to and even better than the reported results. The method was validated and applied to profiling free fatty acids in human plasma. Saturated free fatty acids abundance in the fasting state was found to be lower than that in the postprandial state, while unsaturated species abundance was found higher. The method was fast and robust with minimum sample pretreatment, so it was promising in the high-throughput screening of free fatty acids.

Tracing the migration and transformation of metabolites in xylem during wood growth by mass spectrometry imaging.

Metabolites in the xylem experience several migration and transformation processes during tree growth. Their composition and distributions can reflect the environment that the wood lived through. Herein, a matrix-assisted laser desorption/ionization mass spectrometry imaging method was developed to investigate the migration and transformation of metabolites in the xylem during heartwood formation and after mechanical injury. The thickness of the wood slice, the type of matrix and its manner of deposition were optimized to improve ionization response and spatial resolution. The mass difference correlation (MDC) data processing method was proposed to improve the efficiency of compound identification, in which the compounds were classified by their molecular weight. The compound species was identified by results calculated using MDC and the experimental results from MS/MS. The directly identified metabolites, whose type and number were found to be quite different between sapwood and heartwood, demonstrated the transformation and migration of metabolites from sapwood to heartwood. Additionally, two kinds of resins produced from different positions were identified by MSI simultaneously, even though their heterogeneous distribution was not visible in optical images. The origin and type of the two resins were deduced from the identified compounds and their molecular distribution. This work provides a method to directly reveal metabolite migration and transformation mechanisms in xylem during wood growth.

Expansion of the composition library for chemodiversity of hardwood extractives at molecular level by ultrahigh-resolution mass spectrometry.

To enhance the characterization of wood extractives at molecular level, a detailed ultrahigh-resolution mass spectrometry (UHRMS)-based analytical methodology was developed in this work. The analytical strategies, including selection of compatible solvent for extraction, evaluation of ionization solvent for effective electrospray ionization, and multi-dimensional data analysis, were established to ensure a comprehensive characterization of complex compositions in wood extractives. Extraction capability of seven solvents with varied polarities was examined by a standard reference material of hardwood biomass and evaluated based on thousands of compounds which were much more than those discovered before. With a variety of data-processing approaches, including compound type distribution, double bond equivalent versus carbon number plot, and van Krevelen diagram, the chemodiversity of the extractives was fully explored from different perspectives. This work greatly expanded the compound library of wood extractives and could also provide guidance for the integrated composition analysis of other biomass materials.

Rational Engineering of Escherichia coli for High-Level Production of Riboflavin.

Riboflavin is widely used as a food additive. Here, multiple strategies were used to increase riboflavin production in Escherichia coli LS31T. First, purR deletion and co-overexpression of fbp, purF, prs, gmk, and ndk genes resulted in an increase of 18.6% in riboflavin titer (reaching 729.7 mg/L). Second, optimization of reduced nicotinamide adenine dinucleotide phosphate/nicotinamide adenine dinucleotide ratio and respiratory chain activity in LS31T increased the titer up to 1020.2 mg/L. Third, the expression level of the guaC gene in LS31T was downregulated by ribosome binding site replacement, and the riboflavin production was increased by 10.6% to 658.5 mg/L. Then, all the favorable modifications were integrated together, and the resulting strain LS72T produced 1339 mg/L of riboflavin. Moreover, the riboflavin titer of LS72T reached 21 g/L in fed-batch cultivation, with a yield of 110 mg riboflavin/g glucose. To our knowledge, both the riboflavin titer and yield obtained in fed-batch fermentation are the highest ones among all the rationally engineered strains.

Mass spectrometry imaging for direct visualization of components in plants tissues.

Mass spectrometry is considered the most informative technique for components identification and has been widely adopted in plant sciences. However, the spatial distribution of compounds in the plant, which is vital for the exploration of plant physiological mechanisms, is missed in MS analysis. In recent years, mass spectrometry imaging has brought a great breakthrough in plant analysis because it can determine both the molecular compositions and spatial distributions, which is conducive to understand functions and regulation pathways of specific components in plants. Mass spectrometry imaging analysis of plant tissue is toward high sensitivity, high spatial resolution, and even single-cell analysis. Despite many challenges and technical barriers, such as difficulties of sample pretreatment caused by morphological diversity of plant tissues, obstacles for high spatial resolution imaging, and so on, lots of researches have contributed to remarkable progress, including improvement in tissue preparation, matrix innovation, and ionization mode development. This review focuses on the advances of mass spectrometry imaging analysis of plants in the last 5 years, including commonly used ionization techniques, technical advances, and recent applications of mass spectrometry imaging in plants.

Diacylglycerols ions as novel marker indicators for the classification of edible oils using ultrahigh resolution mass spectrometry.

Diacylglycerols (DAGs) ions, instead of triacylglycerols (TAGs) ions, were established as marker indicators for an improved classification of edible oils using ultrahigh resolution mass spectrometry (UHRMS). DAGs ions can be used not only to identify triacylglycerols (TAGs) and their embedded fatty acids (FAs), but also to distinguish positional isomers of TAGs. In this work, DAGs ions were determined in edible oils by direct infusion atmospheric pressure chemical ionization-ultrahigh resolution mass spectrometry (APCI-UHRMS), where the ultrahigh resolving power up to 500,000 FWHM (full width at half maximum) can provide accurate molecular compositions and detailed fingerprints MS spectra in a minute. A total of 146 samples belonging to 22 species of plant oils and animal fats, were characterized. Chemometric analyses were performed using principal component analysis, partial least square-discriminant analysis and orthogonal partial least squares-discriminant analysis. DAGs ions were proved to be better than TAGs ions as marker indicators in the chemometric analyses. An overall correct rate of 93.40% was achieved for the classification of tested samples. In addition, blend oils and gutter oils were also characterized by this developed method.

Improving riboflavin production by knocking down ribF, purA and guaC genes using synthetic regulatory small RNA.

Riboflavin is a commercially important compound in the food, pharmaceutical, chemical, and cosmetic industries. The down-regulation of expression levels of ribF, purA and guaC genes involved in the downstream or branch reactions of riboflavin biosynthesis pathway could direct more carbon flux to riboflavin accumulation. In this study, we made an attempt to fine-tune the expression levels of the 3 genes by using synthetic regulatory small RNA to enhance riboflavin production in Escherichia coli. Firstly, each of the 3 genes was knocking down by using 5 different sRNAs, respectively, and a highest increase of 50.2 % in riboflavin titer was achieved by using anti-ribF5 sRNA. Then this sRNA was further co-expressed with 5 anti-purA and 5 anti-guaC sRNAs to simultaneously knocking down 2 or 3 genes. Co-expression of anti-ribF5 and anti-guaC3 led to the highest riboflavin production of 1091.3 mg/L, which was further increased by 97.6 % compared to the base strain. Finally, the expression levels of anti-ribF5 and anti-guaC3 were further fine-tuned by using 4 different promoters. The best strain WY40, in which the two sRNAs were respectively expressed by PJ23100 and PJ23107 promoter, produced 1454.5 mg/L riboflavin with an increase of 163.4 % compared to the base strain. To our knowledge, it's the first study to enhance riboflavin synthesis by simultaneously regulating the expression levels of ribF, purA and guaC genes, which led to a highest yield of 0.147 g/g glucose among all reported riboflavin-producing strains.

[Thirty years development of metabolic engineering: a review].

Since its establishment 30 years ago, the discipline of metabolic engineering has developed rapidly based on its deep integration with molecular biology, systems biology and synthetic biology successively, which has greatly contributed to advancing and upgrading biotechnology industry. This review firstly analyzes the current status of academic research and China's competence in the area of metabolic engineering according to the data of papers published in SCI-indexed journals in the past 30 years. Subsequently, the article summarizes the development of systems biology methods and enabling technologies of synthetic biology and their applications in metabolic engineering in the past 10 years. Finally, the major challenges and future perspectives for the development of metabolic engineering are briefly discussed.

Production of riboflavin and related cofactors by biotechnological processes.

Riboflavin (RF) and its active forms, the cofactors flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), have been extensively used in the food, feed and pharmaceutical industries. Modern commercial production of riboflavin is based on microbial fermentation, but the established genetically engineered production strains are facing new challenges due to safety concerns in the food and feed additives industry. High yields of flavin mononucleotide and flavin adenine dinucleotide have been obtained using whole-cell biocatalysis processes. However, the necessity of adding expensive precursors results in high production costs. Consequently, developing microbial cell factories that are capable of efficiently producing flavin nucleotides at low cost is an increasingly attractive approach. The biotechnological processes for the production of RF and its cognate cofactors are reviewed in this article.

Analytical strategies for chemical characterization of bio-oil.

Bio-oils, produced by biomass pyrolysis, have become promising candidates for feedstocks of high value-added chemicals and alternative sources for transportation fuels. Bio-oil is such a complicated mixture that contains nonpolar hydrocarbons and polar components which cover almost all kinds of organic oxygenated compounds such as carboxylic acids, alcohols, aldehydes, ketones, esters, furfurals, phenolic compounds, sugar-like material, and lignin-derived compounds. Comprehensive characterization of bio-oil and its subfractions could provide insight into the conversion process of biomass processing, as well as its further utilization as transportation fuels or chemical raw materials. This review focuses on advanced analytical strategies on in-depth characterization of bio-oil, which is concerned with gas chromatography, high-resolution mass spectrometry, FTIR spectroscopy and NMR spectroscopy, offering complementary information for previous reviews.

Simultaneous determination of tandospirone and its active metabolite, 1-[2-pyrimidyl]-piperazine in rat plasma by LC-MS/MS and its application to a pharmacokinetic study.

A rapid, sensitive and selective liquid chromatography-tandem mass spectrometry method for the detection of tandospirone (TDS) and its active metabolite 1-[2-pyrimidyl]-piperazine (1-PP) in Sprague-Dawley rat plasma is described. It was employed in a pharmacokinetic study. These analytes and the internal standards were extracted from plasma using protein precipitation with acetonitrile, then separated on a CAPCELL PAK ADME C18 column using a mobile phase of acetonitrile and 5 mm ammonium formate acidified with formic acid (0.1%, v/v) at a total flow rate of 0.4 mL/min. The detection was performed with a tandem mass spectrometer equipped with an electrospray ionization source. The method was validated to quantify the concentration ranges of 1.000-500.0 ng/mL for TDS and 10.00-500.0 ng/mL for 1-PP. Total time for each chromatograph was 3.0 min. The intra-day precision was between 1.42 and 6.69% and the accuracy ranged from 95.74 to 110.18% for all analytes. Inter-day precision and accuracy ranged from 2.47 to 6.02% and from 98.37 to 105.62%, respectively. The lower limits of quantification were 1.000 ng/mL for TDS and 10.00 ng/mL for 1-PP. This method provided a fast, sensitive and selective analytical tool for quantification of tandospirone and its metabolite 1-PP in plasma necessary for the pharmacokinetic investigation.

A reliable LC-MS/MS method for the quantification of N-acetyl-p-benzoquinoneimine, acetaminophen glutathione and acetaminophen glucuronide in mouse plasma, liver and kidney: Method validation and application to a pharmacokinetic study.

A rapid, specific, and sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been developed and validated to simultaneously quantify N-acetyl-p-benzoquinoneimine (NAPQI), acetaminophen-glutathione (acetaminophen-glut) and acetaminophen-glucuronide (acetaminophen-gluc) in mouse plasma, liver and kidney homogenates. Analytes were eluted by a binary gradient mobile phase composed of water (phase A) and methanol containing 0.1% formic acid (phase B) at a flow rate of 0.3 mL/min, which was performed on a CAPCELL PAK C18 MG II column. It took 3.2 min to detect three analytes in a single run. Quantification was carried out in positive mode combined with multiple reaction monitoring. The validation of the LC-MS/MS method consisted of specificity, linearity, precision, accuracy, protein precipitation recovery, matrix effect, dilution integrity and stability. The plasma and tissue homogenate calibration curves were linear over concentration ranges of 0.050-5.00, 0.050-5.00 and 0.100-40.0 µg/mL, with a lower limit of quantification of 0.050, 0.050, and 0.100 µg/mL for NAPQI, acetaminophen-glut and acetaminophen-gluc, respectively. The intra- and inter-run precision values were within 12.47% for NAPQI, 12.11% for acetaminophen-glut and 11.86% for acetaminophen-gluc at their lower limit of quantitation levels. The samples were stable under all tested conditions. This method was successfully applied to study the pharmacokinetics of NAPQI, acetaminophen-glut and acetaminophen-gluc in ICR mice following oral administration of 200 mg/kg of acetaminophen suspension.