RESUMO
The hot deformation behavior and flow stress characteristics of experimental 26CrMo7S steel were analyzed using a thermal simulator under a range of conditions, including a strain rate range of 0.01~10 s-1, a temperature range of 850~1250 °C, and a maximum deformation amount of 70%. The Arrhenius constitutive model was built for the corresponding conditions, and the model's accuracy was verified through error analysis. Additionally, hot processing maps were constructed to analyze the processing zone of the steel under different hot deformation conditions. Finally, the microstructure of the processing zones was observed and verified using the electron backscattered diffraction (EBSD). The results indicate that the interaction of work hardening and dynamic softening influences the hot deformation behavior of 26CrMo7S steel. The Arrhenius constitutive equation with a value of the correlation coefficient (r = 0.99523) accurately predicts the flow behavior of 26CrMo7S steel under different strains. The optimal processing zone obtained with the hot processing maps is within a deformation range of 1010~1190 °C and a strain rate range of 0.01~10-1.5 s-1, and the obtained microstructure is in good agreement with the analysis results.
