Inflammatory indexes and anemia in chronic kidney disease: correlation and survival analysis of the National Health and Nutrition Examination Survey 2005-2018.

BACKGROUND: There is currently no research on the correlation between novel inflammatory indexes systemic immune-inflammation index (SII), neutrophil-to-lymphocyte ratio (NLR), platelet-to-lymphocyte ratio (PLR), and the risk of anemia in chronic kidney disease (CKD) population, as well as survival analysis in CKD with anemia. METHODS: This investigation encompassed 4444 adult subjects out of the National Health and Nutrition Examination Survey (NHANES) between 2005 and 2018. The study utilized multi-variable logistic regression to assess the relationship between SII, NLR, PLR, and anemia risk occurrence in CKD population. Survival differences in CKD patients with anemia, based on varying levels of SII, NLR, and PLR were evaluated employing Kaplan-Meier and Cox proportional hazards models. RESULTS: The adjusted logistic regression model demonstrates that SII, NLR, and PLR are associated with the risk of anemia occurrence in CKD population. Kaplan-Meier's analysis reveals significant differences in survival rates among CKD patients with anemia stratified by NLR levels. The adjusted Cox proportional hazards model shows that the higher NLR group has a 30% elevated risk of all-cause mortality contrasted with lower group (hazard ratio, HR: 1.30, confidence interval (CI) [1.01, 1.66], p value <.04). Restricted cubic spline (RCS) demonstrates no nonlinear relationship between NLR and all-cause mortality. Lastly, sub-cohort analysis indicates that in populations with diabetes, hypertension, and hyperuricemia, NLR levels have a greater impact on all-cause mortality. CONCLUSIONS: Controlling inflammation may reduce the occurrence of anemia in CKD populations, with NLR serving to be a potential prognostic indicator for survival results within CKD patients suffering from co-morbid anemia.

Conductive and superhydrophobic lignin/carbon nanotube coating with nest-like structure for deicing, oil absorption and wearable piezoresistive sensor.

The development of multifunctional coatings is a trend. Here, a conductive and superhydrophobic coating with nest-like structure was prepared on the wood or polyurethane (PU) sponge by spraying or soaking methods. The coating contains lignin and carboxylated multi-wall carbon nanotubes (MWCNT) as the main materials, both methyl trimethoxysilane (MTMS) and polydimethylsiloxane (PDMS) as the modifiers. And benefiting from the protective effect of the nest-like structure, the coating exhibits excellent abrasion resistance (withstanding 43 abrasion cycles), stability, and UV resistance (little change in water contact angle after 240 h of ultraviolet (UV) irradiation) by optimizing the proportions. Additionally, the coating provides eminent deicing (complete removal after 142.7 s) and self-cleaning on the wood, as well as the superior sensing performance and oil absorption (15.0-49.6 g/g for various oils) on the PU sponge. When assembled into compressible piezoresistive sensor, it could clearly sense the signals of rapid, short, circulation, different speed and deformation, possessing a prosperous wearable device prospect. It is envisaged that the coating supplies a new platform for superhydrophobicity, wearable electronics and oil absorption.

Nonlinear correlation and mediation effects between serum 25-hydroxyvitamin D levels and all-cause mortality in COPD patients.

Background: Numerous studies have shown that low levels of vitamin D are linked to a higher risk of inflammatory diseases and their progression. However, how vitamin D levels affect mortality in chronic obstructive pulmonary disease (COPD) patients is still unclear. Thus, this study aimed to explore the relationship between serum 25-hydroxyvitamin D [25(OH)D] levels and the risk of death from all causes in U.S. adults with COPD. Methods: This study analyzed 1,876 adults with COPD from the National Health and Nutrition Examination Survey (2005-2018). Mortality data up to December 31, 2019, were obtained from the National Death Index (NDI) records. Participants were categorized into three groups according to their 25(OH)D levels: Q1 (<50.0 nmol/L) for deficiency; Q2 (50.0-74.9 nmol/L) for insufficiency; and Q3 (≥75.0 nmol/L) for adequacy. A weighted Cox regression model assessed the link between 25(OH)D levels and mortality. Kaplan-Meier survival curves, subgroup, and sensitivity analyses were conducted. Additionally, the relationship between 25(OH)D and the hazard ratio (HR) was detailed through restricted cubic spline analysis. Mediation analysis revealed how 25(OH)D mediates the relationship between Dietary Inflammatory Index and mortality. Results: There were 395 all-cause deaths during the follow-up, resulting in a mortality rate of 21.06%. After adjusting for potential confounders, higher 25(OH)D levels significantly correlated with a lower risk of all-cause mortality in COPD patients (HR = 0.52, 95% CI: 0.37-0.72, p < 0.001). Restricted cubic spline analysis indicated a non-linear relationship between 25(OH)D levels and all-cause mortality (p for nonlinear = 0.023), with levels below 63.4 nmol/L posing an independent risk for all-cause mortality in COPD patients (HR = 0.98, 95% CI: 0.97-0.99, p = 0.005). Sensitivity and subgroup analyses confirmed our results' robustness, with mediation analysis showing 25(OH)D's 22% mediating effect on diet-induced inflammation and all-cause mortality in COPD patients. Conclusion: 25(OH)D independently lowers the risk of all-cause mortality in COPD patients, with a non-linear L-shaped correlation, and mediates the effect of Dietary Inflammatory Index on mortality, suggesting new therapeutic possibilities.

Magnetic superhydrophobic cellulose nanofibril based aerogel with rope-ladder like structure incorporating both superelasticity and excellent oil absorption.

Achieving an equilibrium between exceptional oil absorption and remarkable elasticity has emerged as a formidable challenge for magnetic porous materials designed for oil absorption. Here, we propose an original, magnetic and superhydrophobic cellulose nanofibril (CNF) based aerogel system with a rope-ladder like skeleton by to greatly improve the issue. Within this system, CNF as the skeleton was combined with multiwalled carbon nanotubes (MWCNT)@Fe3O4 as the magnetic and enhanced component, both methyltrimethoxysilane (MTMS) and acetonitrile-extracted lignin (AEL) as the soft-hard associating constituents. The resultant CNF based aerogel shows a rope-ladder like pore structure to contribute to high elasticity and excellent oil absorption (28.34-61.09 g/g for various oils and organic solvents) under the synergistic effect of Fe3O4@MWCNT, AEL and MTMS, as well as good specific surface area (27.97 m2/g), low density (26.4 mg/cm3). Notably, despite the introduced considerable proportion (0.5 times of mass-CNF) of Fe3O4@MWCNT, the aerogel retained an impressive compression-decompression rate (88%) and the oil absorption efficiency of above 87% for various oils due to the soft-hard associating structure supported by both MTMS and AEL. This study provides a prospective strategy to balance between high elasticity and excellent oil absorption of CNF based aerogel doping inorganic particles.

Preparation of highly elastic superhydrophobic CNF/Fe3O4 based materials modified in aqueous phase for oil-water separation.

Magnetic superhydrophobic materials have broad application prospect in oil-water separation. In this study, a magnetic and superhydrophobic aerogel with lamellar structure was successfully prepared using cellulose nanofibrils (CNF) as the skeleton, Fe3O4 as the magnetic ion, 1H, 1H, 2H, 2H trialkylfluorooctane triethoxysilane (FS) and 3-(2-aminoethyl amino)-propyl trimethoxysilane (AS) as the combined modifier. The prepared aerogel shows lower density (38.63 mg/cm3), excellent magnetic (15.13 emu/g), high elasticity and good oil sorption properties (21 g/g). In addition, FS/AS also exhibits excellent mechanical properties and superhydrophobic ability (water contact angle (WCA) of 151.9 ± 1.4°), as it provides sufficient toughness and low surface energy for the layer-branch structure. It should be noted that the entire preparation process is carried out in the aqueous phase, without the use of any organic solvents, providing a green oil-water separation strategy.

The relationship between dietary inflammatory index (DII) and early renal injury in population with/without hypertension: analysis of the National health and nutrition examination survey 2001-2002.

BACKGROUND: Inflammation plays a crucial role in occurrence of kidney injury, and specific dietary patterns can influence systemic inflammation levels. However, the relationship between dietary inflammatory potential and early-stage kidney damage remains unclear. METHOD: 2,108 participants was recruited from 2001-2002 National Health and Nutrition Examination Survey (NHANES). Dietary Inflammatory Index (DII) is utilized to assess dietary inflammatory potential, calculated through a 24-h dietary recall questionnaire. Early renal injury was evaluated using urinary albumin to creatinine (UACR), cystatin C (CysC), ß-2 microglobulin (ß2M), and estimated glomerular filtration rate (eGFR) based on serum creatinine (eGFRs), cystatin C (eGFRc), and both Scr and CysC (eGFRs&c). Participant characteristics were analyzed, and association between DII, hypertension, and early renal injury markers was explored using multiple linear and logistic regression models. RESULTS: The average age of participants was 53.9 years. DII exhibited a positive correlation with UACR (ß = -0.048[0.017,0.078]), ß2M (ß = 0.019[0.010,0.027]), CysC (ß = 0.012 [0.004,0.021]). Conversely, a negative correlation was observed between DII and eGFRc (ß = -1.126[-1.554, -0.699]), eGFRs&c (ß=-1.101[-1.653, -0.549]). A significant association was observed between hypertension and abnormality of early kidney damage markers. Subgroup analysis reveals that the positive correlation between DII and the occurrence of abnormal markers of early kidney damage is only observed in individuals with hypertension. Furthermore, an interaction between DII and hypertension was detected in eGFRs&c (OR:1.250[1.042, 1.499], p for interaction = 0.03). CONCLUSION: Higher levels of DII may be associated with occurrence of early kidney damage. For individuals with hypertension, avoiding excessive consumption of pro-inflammatory foods may reduce the risk of renal injury.

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film.

Applications for polylactic acid (PLA) are significantly impacted by its poor mechanical properties and lack of thermal stability. The goal of this work is to bridge the gap of poor compatibility among the components and enhance their interface interlocking capability to improve the toughness and thermal stability. Ultrafine bamboo charcoal (UFBC) was treated through deep eutectic solvent (DES) method to deposit sodium lignosulfonate (LS) on its surface. LS was used with PLA as a bio-coupling agent to create an eco-friendly PLA composite film with a wide range of characteristics. Benefiting from the penetration of PLA to the internal pores in UFBC, the resultant L-UFBC/PLA film has a good mechanical interlocking structure. Ls can increase the compatibility and strengthen the interface interlocking capability through DES method, which greatly improves the mechanical properties of the system. In comparison to pure PLA one, the elongation at break was 136.24 % greater, and the crystallinity (Xc) increased from 1.09 % to 3.33 %. Furthermore, the thermal stability of the system was also improved, and the residual at 600 °C rose by 4.83 %. These characteristics offer the prepared L-UFBC/PLA film a wide range of potential applications in the packaging, medical, agricultural, and other sectors.

Association of dietary inflammatory index with all-cause and cardiovascular disease mortality in hyperuricemia population: A cohort study from NHANES 2001 to 2010.

Dietary management is a crucial component of non-pharmacological treatment for hyperuricemia, yet there is a paucity of research on the impact of dietary habits on the survival outcomes of individuals with hyperuricemia. The objective of this study is to examine the association between dietary inflammatory index (DII) and the all-cause and cardiovascular disease (CVD) mortality in individuals with hyperuricemia. This study included 3093 adult participants from National Health and Nutrition Examination Survey (NHANES) 2001 to 2010. Participants were categorized into 4 groups based on quartiles of DII to demonstrate data characteristics, with sample weights considered. The relationship between DII and the risk of hyperuricemia was examined using multivariable logistic regression models. Kaplan-Meier models and Cox proportional hazards models were employed to assess the relationship between DII levels and the all-cause mortality in individuals with hyperuricemia, with the non-linear relationship tested using restricted cubic splines (RCS). Competing risk models were employed to investigate the association between DII levels and the CVD mortality in individuals diagnosed with hyperuricemia. Subgroup and sensitivity analysis were performed to confirm the robustness and reliability of the findings. Among the participants, 47.95% were aged over 60 years. A positive association observed between the highest quartile of DII level and the incidence of hyperuricemia (OR: 1.34, CI [1.13, 1.57]). Elevated DII levels were correlated with increased all-cause mortality (P value < .001) and CVD mortality (P value < .001) in participants. In comparison to the lowest quartile, the highest quartile of DII exhibited a 31% rise in all-cause mortality (HR: 1.31, CI [1.01, 1.68]) and a 50% increase in CVD mortality (HR: 1.50, CI [1.00, 2.26]). No indication of a nonlinear association between DII levels and all-cause mortality (p-non-linear = .43). These findings indicate a positive correlation between the pro-inflammatory diet and the incidence of hyperuricemia. Additionally, a pro-inflammatory diet may elevate the all-cause and CVD mortality in individuals with hyperuricemia.

Effect of dietary protein intake on cognitive function in the elderly with chronic kidney disease: analysis of the National Health and Nutrition Examination Survey 2011-2014.

BACKGROUND: Cognitive dysfunction is prevalent among the elderly diagnosed with chronic kidney disease (CKD). Low protein diets are used for retarding the progression of CKD in clinical practice. Nonetheless, the impact of dietary protein consumption on cognitive function in this population remains uncertain. METHODS: We recruited 2306 participants (≥60 years) from 2011 to 2014 National Health and Nutrition Examination Survey (NHANES). 24-h dietary recall questionnaire was utilized to evaluate protein intake. Cognitive function was measured using the Consortium to Establish a Registry for Alzheimer's Disease (CERAD), Animal Fluency Test (AFT), and Digit Symbol Substitution Test (DSST). Participants' characteristics were analyzed, and the interaction between protein consumption and CKD on cognitive impairment were analyzed using a logistic regression model. RESULTS: We divided participants into three groups based on CKD stages: no CKD, CKD stage G1 to G2 (19%), and CKD stage G3 to G5 (18%). The average protein intake was 0.97 g/(kg·d). In the higher protein intake group, CKD stages G1 to G2 elevated the risk of immediate memory impairment (OR: 2.441, 95% Cl: 1.161-5.132 for protein consumption in 1.0-1.2g/(kg·d); OR: 2.225, 95% Cl: 1.015-4.876 for protein consumption in >1.2 g/(kg·d)). However, no similar resuts were observed in the lower protein intake group. In addition, the interaction between CKD status and protein intake on immediate memory was statistically significant (p = .041). CONCLUSION: A higher probability of cognitive impairment in the elderly with early-stage CKD may be linked to higher protein intake. Low protein diets may be a potential strategy to release cognitive impairment in the elderly with early-stage CKD.

Association between dietary intakes of B vitamins and nonalcoholic fatty liver disease in postmenopausal women: a cross-sectional study.

Background: Non-alcoholic fatty liver disease (NAFLD) is increasingly common globally, particularly among postmenopausal women. Diet plays a fundamental role in the treatment of NAFLD. However, clinical research on the dietary intakes of B vitamins, specifically in postmenopausal women, is scant. Hence, it is imperative to study the impact of B vitamin dietary intake in postmenopausal women. Methods: This study utilized National Health and Nutrition Examination Survey (NHANES) data for 668 postmenopausal women. Logistic regression analysis was conducted to investigate the association of the intakes of B vitamins with hepatic steatosis and liver fibrosis prevalence. The analysis accounted for various covariates and employed restricted cubic spline analysis to examine potential nonlinear relationships. Additionally, interactions among age, diabetes, and B-vitamin intakes, as well as the interaction between folate and vitamin B12 intake, were explored. Results: Higher intakes of folate [0.30 (0.10-0.88)], choline [0.26 (0.07-0.95)], vitamin B1, and vitamin B2 were associated with a reduced risk of hepatic steatosis in postmenopausal women. The associations of niacin (P-nonlinear = 0.0003), vitamin B1 (P-nonlinear = 0.036), and vitamin B2 (P-nonlinear<0.0001) intakes with hepatic steatosis showed a nonlinear pattern. However, no significant associations were observed between the intakes of niacin, vitamin B6 and vitamin B12 and hepatic steatosis. Furthermore, there were no significant associations between B-vitamin intakes and liver fibrosis. No interaction effects were observed. Conclusion: Dietary intakes of folate, choline, vitamin B1, and vitamin B2 may be associated with liver steatosis in postmenopausal women, these results suggest that optimizing the intake of these specific B vitamins may have a protective effect against liver steatosis in postmenopausal women, offering valuable insights into potential dietary strategies to promote their well-being.

Case report: A HIV-negative hemodialysis patient positive for pANCA with severe pneumocystis pneumonia: A case report and review of literature.

RATIONALE: Pneumocystis pneumonia (PCP) is an opportunistic fungal infection that occurs in people with impaired or suppressed immunity such as patients with human immunodeficiency virus or organ transplant. However, the incidence and characteristics of PCP in the population with long-term hemodialysis is poorly described in the literature. PATIENT CONCERNS: We present a case of a 50-year-old female patient being transferred to our hospital in February 2022 with a 20-day history of cough and tight breath. She received amoxicillin and cephalosporin anti-infection treatment successively in local hospital but no significant improvement in symptoms. She had a 2-year history of hemodialysis and no relevant transplantation and human immunodeficiency virus infection. She was diagnosed as ANCA associated vasculitis (AAV) and given oral prednisone acetate (20 mg/day) and methotrexate (2.5 mg/week) half a year ago. DIAGNOSES: Based on the patient's medical history, Lung computerized tomography image, the Next generation sequencing report, the patient was diagnosed with renal failure, anti-neutrophil cytoplasmic antibody associated vasculitis, and Pneumocystis pneumonia. INTERVENTIONS: The dosage of immunosuppressant was reduced due to leucocyte dripping and fever, and antibiotic and antifungal treatment were also given. The patient's lung condition was getting worse and noninvasive ventilator was required to maintain blood oxygen. Blood filtration is used to remove toxins. Ganciclovir and trimethoprim-sulfamethoxazole was used based on the next generation sequencing report. OUTCOMES: The patient died of respiratory failure. LESSONS: The risk of PCP in hemodialysis patients may be higher than that in ordinary population, and the prognosis of patients with immunosuppression may be worse. Dynamic assessment of vasculitis activity is necessary for hemodialysis patients with AAV because infections may obscure lung symptoms of AAV. It is not recommended that hemodialysis patients with long-term immunosuppression should reduce or stop the dosage of immunosuppressive drugs during the treatment because it may aggravate the condition of PCP. There is still no clear conclusion on whether hemodialysis patients need preventive medicine, but the identification of risk factors and early diagnosis and treatment are important for the prognosis of PCP on hemodialysis population.

Construction of CNC@SiO2@PL Based Superhydrophobic Wood with Excellent Abrasion Resistance Based on Nanoindentation Analysis and Good UV Resistance.

Construction of superhydrophobic woods with high abrasion resistance is still a major challenge, and micro analysis for abrasion resistance is scarce. To improve these issues, cellulose nanocrystals (CNC)@SiO2@phosphorylated lignin (PL) rods were prepared by SiO2 in situ generated on CNC, and then the modified lignin attached to the CNC@SiO2 rods surface. Subsequently, the superhydrophobic coating was constructed using hydrophobic modified CNC@SiO2@PL rods as the main structural substance by simple spraying or rolling them onto wood surfaces, and both polydimethylsiloxane (PDMS) and epoxy resin were used as the adhesives. The resulting coating had excellent superhydrophobic properties with a water contact angle (WCA) of 157.4° and a slide angle (SA) of 6°. The introduced PL could enhance ultraviolet (UV) resistance of the coating due to the presence of these groups that absorbed UV light in lignin. In the abrasion resistance test, compared with the SiO2/PL coating, the abrasion resistance of the one with CNC was much higher, suggesting that CNC could improve the abrasion resistance of the coating due to its high crystallinity and excellent mechanical strength. The coating with PDMS performed better than the one with epoxy resin because the soft surface could offset part of the external impact by deformation in the abrasion process. This was also consistent with the results of the nanoindentation (NI) tests. In view of the simple preparation and good performance, this superhydrophobic wood will have broad application potential.

Identification of diagnostic gene biomarkers and immune infiltration in patients with diabetic kidney disease using machine learning strategies and bioinformatic analysis.

Objective: Diabetic kidney disease (DKD) is the leading cause of chronic kidney disease and end-stage renal disease worldwide. Early diagnosis is critical to prevent its progression. The aim of this study was to identify potential diagnostic biomarkers for DKD, illustrate the biological processes related to the biomarkers and investigate the relationship between them and immune cell infiltration. Materials and methods: Gene expression profiles (GSE30528, GSE96804, and GSE99339) for samples obtained from DKD and controls were downloaded from the Gene Expression Omnibus database as a training set, and the gene expression profiles (GSE47185 and GSE30122) were downloaded as a validation set. Differentially expressed genes (DEGs) were identified using the training set, and functional correlation analyses were performed. The least absolute shrinkage and selection operator (LASSO), support vector machine-recursive feature elimination (SVM-RFE), and random forests (RF) were performed to identify potential diagnostic biomarkers. To evaluate the diagnostic efficacy of these potential biomarkers, receiver operating characteristic (ROC) curves were plotted separately for the training and validation sets, and immunohistochemical (IHC) staining for biomarkers was performed in the DKD and control kidney tissues. In addition, the CIBERSORT, XCELL and TIMER algorithms were employed to assess the infiltration of immune cells in DKD, and the relationships between the biomarkers and infiltrating immune cells were also investigated. Results: A total of 95 DEGs were identified. Using three machine learning algorithms, DUSP1 and PRKAR2B were identified as potential biomarker genes for the diagnosis of DKD. The diagnostic efficacy of DUSP1 and PRKAR2B was assessed using the areas under the curves in the ROC analysis of the training set (0.945 and 0.932, respectively) and validation set (0.789 and 0.709, respectively). IHC staining suggested that the expression levels of DUSP1 and PRKAR2B were significantly lower in DKD patients compared to normal. Immune cell infiltration analysis showed that B memory cells, gamma delta T cells, macrophages, and neutrophils may be involved in the development of DKD. Furthermore, both of the candidate genes are associated with these immune cell subtypes to varying extents. Conclusion: DUSP1 and PRKAR2B are potential diagnostic markers of DKD, and they are closely associated with immune cell infiltration.

Cellulose nanofibril/PVA/bamboo activated charcoal aerogel sheet with excellent capture for PM2.5 and thermal stability.

It is still a challenge to prepare air filtration materials with high filtration efficiency and good thermal stability from renewable materials. In this study, cellulose nanofibril (CNF), poly (vinyl alcohol) (PVA), and bamboo activated charcoal (BAC) were used to build an air filtration system with double filtration by mixing and freeze-drying. The resulting CNF/PVA/BAC aerogel sheet reached a filtration efficiency of 99.69% for PM2.5 due to its double filtration from the network structure of CNF and electrostatic adsorption of BAC. The composite material also showed high thermal stability with its filtration efficiency over 95% even after exposure to 200 °C. After modification, the hydrophobic CNF/PVA/BAC filtration sheet could be reused for over 5 times by water washing whereby the filtration efficiency remained above 95%. The environmentally friendliness excellent filtration efficiency and simplistic fabrication make the aerogel sheet a potential material choice to cope with the severe air pollution today.

Improved Hydrophobic, UV Barrier and Antibacterial Properties of Multifunctional PVA Nanocomposite Films Reinforced with Modified Lignin Contained Cellulose Nanofibers.

In this study, we reported PVA nanocomposite films enhanced by polyethyleneimine (PEI)-lignin contained cellulose nanofibers (LCNFs) via the solvent casting method. An easy and available method was preformed to prepare LCNFs using a supermasscolloider from unbleached bamboo waste after a mild alkaline pretreatment. The results demonstrate that LCNF-PEI can greatly improve mechanical, hydrophobic, anti-UV shielding and antibacterial properties of the composite films. The tensile strength of LPP1 film was improved to 54.56 MPa, which was higher than 39.37 MPa of PVA film. The water contact angle of films increased from 35° to 104° with an increase in LCNF content from 0 to 6 wt%. Meanwhile, the nanocomposite film demonstrated the effect of full shielding against ultraviolet light when the amount of LCNF-PEI reached 6 wt%. The addition of LCNF-PEI endowed excellent antibacterial activity (against S. aureus and E. coli), which indicated potential applications in the packaging field.

Preparation of lignin nanospheres based superhydrophobic surfaces with good robustness and long UV resistance.

Lignin is an ideal substance for preparation of functional materials. Specifically, lignin nanospheres (LNPs) are formed by self-assembly of lignin molecules and show great application prospects in drug delivery, electrochemistry, catalysis, etc. At present, most superhydrophobic surfaces are mainly built using non-degradable inorganic particles and are still beset by defects such as poor environmental performance, easy aging, and low mechanical strength. In this study, an aqueous mixture containing LNPs, cellulose nanocrystals (CNCs) and polyvinyl alcohol (PVA) was sprayed onto wood surfaces and then modified by 1H,1H,2H,2H-perfluorooctyltrichlorosilane (FOTS) to obtain a superhydrophobic surface. In the superhydrophobic surface, LNPs were used as the main structural materials instead of inorganic particles, CNC was used as a reinforcement material and PVA was used as an adhesive. The resulting superhydrophobic surface showed a water contact angle (WCA) of 162°, good robustness resistance and long UV resistance in which the superhydrophobicity was still retained after exposure to ultra-high UV light (power of 1000 W) for 7 h, providing more directions for high-value application of lignin.

Facile Preparation of Chitosan-Based Composite Film with Good Mechanical Strength and Flame Retardancy.

To improve on the poor strength and flame retardancy of a chitosan (CS)-based functional film, cellulose nanofiber (CNF) was taken as the reinforced material and both ammonium polyphosphate (APP) and branched polyethyleneimine (BPEI) as the flame-retardant additives in the CS matrix to prepare the CS/CNF/APP/BPEI composite film by simple drying. The resulting composite film showed good mechanical strength, with a tensile strength reaching 71.84 Mpa due to the high flexibility of CNF and the combination of CS, CNF and BPEI through strong hydrogen bonding interactions. The flame retardant-performance of the composite film greatly enhanced the limit oxygen index (LOI), up to 32.7% from 27.6% for the pure film, and the PHRR intensity decreased to 28.87 W/g from 39.38% in the micro-scale combustion calorimetry (MCC) test due to the ability of BPEI to stimulate the decomposition of APP, releasing non-flammable gases such as CO2, N2, NH3, etc., and forming a protective phosphating layer to block the entry of O2. Based on the good flame retardancy, mechanical strength and transparency, the CS/CNF/APP/BPEI composite film has a great potential for future applications.

Preparation of Plastics- and Foaming Agent-Free and Porous Bamboo Charcoal based Composites Using Sodium Silicate as Adhesives.

Plastics and foaming agents are often used to prepare large-size and low-density bamboo charcoal (BC) based composites. In this study, a plastic-free and foaming agent-free BC based composite was prepared by substituting sodium silicate (SS) for plastics. The effect of both the BC particle sizes and the usage amount of SS on the mechanical and adsorptive properties of the BC/SS composites were investigated. The experimental results show that when the BC particle size is 270 µm and the mass ratio of BC to SS is equal to 10:5, the BC/SS composite has the optimal foaming effect and best comprehensive properties. In addition, the foaming pores of the composite are caused by water vapor, which has difficulty escaping the BC because of the blockage of SS during the hot pressing process. In the BC/SS composite (10:5), the static bending intensity and the compressive strength reach respectively 6.13 MPa and 5.5 MPa, and the average pore size and porosity are 557.85 nm and 52.03%, respectively. In addition, its formaldehyde adsorptionrate reaches 21.6%. In view of good mechanical properties, formaldehyde adsorption, and environmentally friendly performance, the BC/SS composite has a great potential as a core layer of interior building materials.

Mechanical and Adsorptive Properties of Foamed EVA-Modified Polypropylene/Bamboo Charcoal Composites.

Due to its excellent adsorption and humidity control function, bamboo charcoal (BC) has often been mixed with polypropylene (PP) to produce PP/BC composites for interior paneling applications. However, due to the poor foaming quality of PP, PP/BC composites suffer as a result of their high density, which limits their scope of use. Here, to improve its foaming quality, PP was modified with ethylene vinyl acetate (EVA), and then the EVA-modified PP (E-PP) was mixed with different contents of BC (0 wt.%-50 wt.%), as well as foaming agent (Azodicarbonamide, AC) and its auxiliaries (ZnO, Znst), in a twin-screw extruder, followed by hot-pressing at high temperature to obtain foamed E-PP/BC composites. The resulting composites showed good porosity and pore distribution with an increase of BC content by up to 20%. Further increase in the BC content seemed to cause the foaming performance to decrease significantly. The product density and adsorption rate increased, while the mechanical strength decreased with increasing BC content. At a BC content of 40 wt.%, the foamed E-PP/BC composite showed the best combined performance, with a density of 0.90 g/cm3, 24-h formaldehyde adsorption rate of 0.48, and bending strength of 11.59 MPa.

A facile preparation of superhydrophobic L-CNC-coated meshes for oil-water separation.

A superhydrophobic stainless steel mesh (called "mesh" in short) is an ideal device to solve oil pollution accidents by oil-water separation. However, its widespread application is prevented by complicated preparation, weak durability, and particularly poor mechanical strength. It is well known that the used adhesives play a key role in the mechanical strength of superhydrophobic coatings. In this study, polyvinylidene fluoride (PVDF) and polydimethylsiloxanes (PDMSs) were respectively used as adhesives and lignin-nanocellulose crystal (L-CNC) particles as main structure materials to prepare L-CNC coated superhydrophobic meshes. Moreover, the meshes coated with L-CNC/PVDF and L-CNC/PDMS were compared with respect to the properties of wettability, sandpaper abrasion, oil-water separation, etc. The results showed that the L-CNC/PVDF-coated mesh had a higher water contact angle (WCA = 154.2°) than the L-CNC/PDMS-coated one (WCA = 152.6°), but worse abrasion resistance. Both of them showed high-efficiency oil/water separation with collection rates above 94.5% and stable reusable ability as the oil collection rates for toluene was still above 93.8% after reusing thirty times, meanwhile showing good heat, UV, acid and alkaline resistance properties.