Applications and perspectives of quaternized cellulose, chitin and chitosan: A review.

Recently, increasing attention has been paid to natural polysaccharides for their low cost, biocompatibility and biodegradability. Quaternization is a modification method to improve the solubility and antibacterial ability of natural polysaccharides. Water-soluble derivatives of cellulose, chitin and chitosan offer the prospect of diverse applications in a wide range of fields, such as antibacterial products, drug delivery, wound healing, sewage treatment and ion exchange membranes. By combining the inherent properties of cellulose, chitin and chitosan with the inherent properties of the quaternary ammonium groups, new products with multiple functions and properties can be obtained. In this review, we summarized the research progress in the applications of quaternized cellulose, chitin and chitosan in recent five years. Moreover, ubiquitous challenges and personal perspectives on the further development of this promising field are also discussed.

Multifunctional Pd/MOFs@MOFs Confined Core-Shell Catalysts with Wrinkled Surface for Selective Catalysis.

Process intensification, targeting the maximization of spatial-temporal productivity utilizing minimum energy and resources has always been the constant trends especially in chemical industry. In this regard, tandem reactions that are able to perform a multi-step reaction in a single pot by eliminating costly separation steps have been viewed as a typical paradigm. However, a spatial isolation of varied active sites with a controlled manner in a single catalyst to avoid deactivation and work synergistically is a challenging problem yet sometimes being overlooked. In this work, a spatial base-metal core-shell structured catalyst with wrinkled surface was successfully fabricated by a direct homoepitaxial growth method in an acid/water system, which exhibited increased hydrophobicity, exposure of active sites and significantly improved product selectivity towards one-pot Knoevenagel condensation-hydrogenation tandem reaction compared with the uncoated catalyst. Meanwhile, the catalytic performance was largely retained and the structural stability was maintained even after successive 8 cycles, which shows great promise for industrial applications.

Positive reverse transcription-polymerase chain reaction assay results in patients recovered from COVID-19: Report of two cases.

BACKGROUND: Coronavirus disease 2019 (COVID-19) has spread around the globe. On February 28, 2020, the World Health Organization adjusted the risk of spread and impact of COVID-19 to "very high" at the global level. Studies have mainly focused on the etiology, epidemiology, and treatment of COVID-19 to limit further spread and the negative impact of the disease, while less attention has been devoted to the follow-up and reexamination of patients who recovered from COVID-19 or were released from quarantine. CASE SUMMARY: This study reports two cases where patients who had negative reverse transcription-polymerase chain reaction (RT-PCR) test results and met the criteria for discharge subsequently had positive RT-PCR test results. The clinical manifestations and computed tomography (CT) findings of these patients were examined. The conversion of RT-PCR test results in these two patients may be related to false-negative and false-positive outcomes of the test. CT images helped track improvement of pulmonary lesions. CONCLUSION: The timing of discharge of COVID-19 patients should be determined by comprehensive analysis of CT images and RT-PCR test results.

Asymmetric Synthesis of 3-Amine-tetrahydrothiophenes with a Quaternary Stereocenter via Nickel(II)/Trisoxazoline-Catalyzed Sulfa-Michael/Aldol Cascade Reaction: Divergent Access to Chiral Thionucleosides.

A generally useful Ni(II)/trisoxazoline-catalyzed asymmetric sulfa-Michael/Aldol cascade reaction is introduced to access chiral 3-amine-tetrahydrothiophene derivatives containing a quaternary stereocenter (32 examples, up to 93% yield, > 20:1 dr and 92% ee). Moreover, the novel strategy offers an efficient and convenient approach to construct chiral thionucleoside analogues.

Confined Thermolysis for Oriented N-Doped Carbon Supported Pd toward Stable Catalytic and Energy Storage Applications.

Carbon-based nanomaterials have been widely utilized in catalysis and energy-related fields due to their fascinating properties. However, the controllable synthesis of porous carbon with refined morphology is still a formidable challenge due to inevitable aggregation/fusion of resulted carbon particles during the high-temperature synthetic process. Herein, a hierarchically oriented carbon-structured (fiber-like) composite is fabricated by simultaneously taking advantage of a confined pyrolysis strategy and disparate bond environments within metal-organic frameworks (MOFs). In the resultant composite, the oriented carbon provides a fast mass (molecule/ion/electron) transfer efficiency; the doping-N atoms can anchor or act as active sites; the mesoporous SiO2 (mSiO2 ) shell not only effectively prevents the derived carbon or active metal nanoparticles (NPs) from aggregation or leaching, but also acts as a "polysulfide reservoir" in the Li-S batteries to suppress the "shuttle" effect. Benefiting from these advantages, the synthesized composite Pd@NDHPC@mSiO2 (NDHPC means N-doped hierarchically porous carbon) exhibits extremely high catalytic activity and stability toward the one-pot Knoevenagel condensation-hydrogenation reaction. Furthermore, the oriented NDHPC@mSiO2 manifests a boosted capacity and cycling stability in Li-S batteries compared to the counterpart that directly pyrolyzes without silica protection. This report provides an effective strategy of fabricating hierarchically oriented carbon composites for catalysis and energy storage applications.

Spatially Ordered Arrangement of Multifunctional Sites at Molecule Level in a Single Catalyst for Tandem Synthesis of Cyclic Carbonates.

With fossil energy resources increasingly drying up and gradually causing serious environmental impacts, pursuing a tandem and green synthetic route for a complex and high-value-added compound by using low-cost raw materials has attracted considerable attention. In this regard, the selective and efficient conversion of light olefins with CO2 into high-value-added organic cyclic carbonates (OCCs) is of great significance owing to their high atom economy and absence of the isolation of intermediates. To fulfill this expectation, a multifunctional catalytic system with controllable spatial arrangement of varied catalytic sites and stable texture, in particular, within a single catalyst, is generally needed. Here, by using a stepwise electrostatic interaction strategy, imidazolium-based ILs and Au nanoparticles (NPs) were stepwise immobilized into a sulfonic group grafted MOF to construct a multifunctional single catalyst with a highly ordered arrangement of catalytic sites. The Au NPs and imidazolium cation are separately responsible for the selective epoxidation and cycloaddition reaction. The mesoporous cage within the MOF enriches the substrate molecules and provides a confined catalytic room for the tandem catalysis. More importantly, the highly ordered arrangement of the varied active sites and strong electrostatic attraction interaction result in the intimate contact and effective mass transfer between the catalytic sites, which allow for the highly efficient (>74% yield) and stable (repeatedly usage for at least 8 times) catalytic transformation. The stepwise electrostatic interaction strategy herein provides an absolutely new approach in fabricating the controllable multifunctional catalysts, especially for tandem catalysis.

Palladium-catalyzed asymmetric formal [3+2] cycloaddition of α-N-heterocyclic acrylates with vinyl epoxides for construction of isonucleoside analogs.

A highly efficient Pd-catalyzed asymmetric formal [3+2] cycloaddition using α-N-heterocyclic acrylates to react with vinyl epoxides has been achieved for the first time to access chiral functionalized tetrahydrofuran skeletons (34 examples, up to 93% yield, >20 : 1 dr and 99% ee). Meanwhile, using a palladium/(S,S)-tBu-FOXAP catalyst or a palladium/(R)-Segphos catalyst, purine or pyrimidine isonucleoside analogs are constructed in high yields and stereoselectivity, respectively. The commercial availability of the catalysts, broad substrate scope and easy transformation of the products make this methodology an attractive method in asymmetric synthesis.

Synthesis of Chiral Six-Membered Carbocyclic Purine Nucleosides via Organocatalytic Enantioselective [3 + 3] Annulation.

A direct route to chiral six-membered carbocyclic purine nucleoside analogues with three chiral stereocenters, including a chiral tetrasubstituted carbon center, via a highly enantioselective [3 + 3] annulation has been established. With the application of Takemoto's catalyst, various chiral six-membered carbocyclic purine nucleoside analogues were obtained in high yields (up to 89%) with moderate to good diastereoselectivities (up to 90:10 dr) and excellent enantioselectivities (92-98% ee). Furthermore, diverse chiral six-membered carbocyclic purine nucleoside analogues were generated by simple transformations.

Enantioselective Synthesis of Carbocyclic Nucleosides via Asymmetric [3 + 2] Annulation of α-Purine-Substituted Acrylates with MBH Carbonates.

An efficient route to chiral carbocyclic nucleoside analogues containing a quaternary stereocenter and a C═C double bond has been established via a highly enantioselective [3 + 2] annulation of Morita-Baylis-Hillman (MBH) carbonates with α-purine-substituted acrylates. With 20 mol % (S)-SITCP as the catalyst, various chiral carbocyclic nucleoside analogues with a quaternary stereocenter and a C═C double bond were obtained in high yields (up to 92%) with good diastereoselectivities (up to 10:1 dr) and excellent enantioselectivities (up to 96% ee). Furthermore, the corresponding products were subjected to diverse transformations to afford interesting and potentially useful chiral carbocyclic nucleosides.

A rapid and divergent access to chiral azacyclic nucleoside analogues via highly enantioselective 1,3-dipolar cycloaddition of ß-nucleobase substituted acrylates.

A rapid and divergent access to chiral azacyclic nucleoside analogues has been established via highly exo-selective and enantioselective 1,3-dipolar cycloaddition of azomethine ylides with ß-nucleobase substituted acrylates. Using 1 mol% of a chiral copper complex, various chiral azacyclic nucleoside analogues were obtained in high yields, excellent exo-selectivities and enantioselectivities (98 to >99% ee).

[Effects of Tongxinluo on MMP-3, 9 and PPARgamma expressions in atherosclerotic rabbits].

OBJECTIVE: To study the effects of Tongxinluo on the expressions of matrix metalloproteinase-3 (MMP-3), MMP-9 and peroxisome proliferators-activated receptor gamma (PPARgamma) in atherosclerotic rabbits and explore the mechanism of its anti-atherosclerotic effect. METHODS: Twenty-four rabbits were randomized equally into control group, atherosclerotic model group (fed with high-fat diet for 14 weeks) and Tongxinluo group. The expressions of MMP-3, 9 and PPARgamma in the 3 groups were observed by means of immunohistochemistry. RESULTS: The expressions of MMP-3, 9 and PPARgamma in the model group and Tongxinluo group were significantly higher than those in the control group (P<0.01). After high-fat diet feeding for 14 weeks, Tongxinluo group showed significantly lower expressions of MMP-3 and 9 but higher expression of PPARgamma than the model group (P<0.01). CONCLUSION: Tongxinluo can inhibit the expression of MMP-3 and 9 and increase the expression of PPARgamma, which might be the mechanism of its anti-atherosclerotic effect.

Design, synthesis, and examination of neuron protective properties of alkenylated and amidated dehydro-silybin derivatives.

A series of C7-O- and C20-O-amidated 2,3-dehydrosilybin (DHS) derivatives ((+/-)-1a-f and (+/-)-2), as well as a set of alkenylated DHS analogues ((+/-)-4a-f), were designed and de novo synthesized. A diesteric derivative of DHS ((+/-)-3) and two C23 esterified DHS analogues ((+/-)-5a and (+/-)-5b) were also prepared for comparison. The cell viability of PC12 cells, Fe(2+) chelation, lipid peroxidation (LPO), free radical scavenging, and xanthine oxidase inhibition models were utilized to evaluate their antioxidative and neuron protective properties. The study revealed that the diether at C7-OH and C20-OH as well as the monoether at C7-OH, which possess aliphatic substituted acetamides, demonstrated more potent LPO inhibition and Fe(2+) chelation compared to DHS and quercetin. Conversely, the diallyl ether at C7-OH and C20-OH was more potent in protection of PC12 cells against H(2)O(2)-induced injury than DHS and quercetin. Overall, the more lipophilic alkenylated DHS analogues were better performing neuroprotective agents than the acetamidated derivatives. The results in this study would be beneficial for optimizing the therapeutic potential of lignoflavonoids, especially in neurodegenerative disorders such as Alzheimer's and Parkinson's disease.

Antioxidant and neuroprotective effects of synthesized sintenin derivatives.

Three series of sintenin derivatives (compounds 1-14) were designed and prepared and their antioxidative and neuroprotective effects were evaluated. The in vitro models of scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, chelating ferrous ions, inhibiting the rat brain homogenates lipid peroxidation, and protecting neurons damaged by hydrogen peroxide were employed for bioassays. It was found that sintenin derivatives 4 and 13 showed remarkable antioxidative and neuroprotective activities.

[Studies on chemical constituents from herbs of Taraxacum mongolicum].

OBJECTIVE: To investigate the chemical constituents of the herbs of Taraxacum mongolicum. METHOD: The chemical constituents were isolated by various column chromatographic methods and their structures elucidated mainly by NMR and MS evidences. RESULT: Forty-four components were obtained and identified were as artemetin (1), quercetin (2), quercetin-3', 4', 7-trime-thyl ether (3), luteolin (4), luteolin-7-O-beta-D-glucopyranoside (5), luteolin-7-O-beta-D-galactopyranoside (6), genkwanin (7), isoetin (8), hesperetin (9), genkwanin-4'-O-beta-D-lutinoside (10), hesperidin (11), quercetin-7-O-[beta-D-glucopyranosyl (1-->6) -beta-D-glucopyranoside (12), quercetin-3, 7-O-beta-D-diglucopyranoside (13), isoetin-7-O-beta-D-glucopyranosyl- 2'-O-alpha-L-arabinopyranoside (14), isoetin-7-O-beta-D-glucopyranosyl-2'-O-alpha-D-glucopyranoside (15), isoetin-7- O-beta-D-glucopyranosyl-2'-O-beta-D-xyloypyranoside (16), caffeic acid (17), furulic acid (18), 3-O-caffeoylquinic acid (19), 3, 5-di-O-caffeoylquinic acid (20), 3, 4-di-O-caffeoylquinic acid (21), 4, 5-di-O-caffeoylquinic acid (22), 1-hydroxymethyl-5-hydroxy-phenyl-2-O-beta-D-glucopyranoside (23), p-hydroxybenzoic acid (24), p-coumaric acid (25), 3, 5-dihydroxylbenzoic acid (26), gallic acid (27), gallicin (28), syringic acid (29), 3, 4-dihydroxybenzoic acid (30), caffeic acid ethyl ester (31), esculetin (32), rufescidride (33), mongolicumin A [6, 9, 10-trihydroxy-benzoxanthene-1, 2-dicarboxylic acid] (34), mongolicumin B [1 l-hydroxy-2-oxo-guaia-1 (10), 3, 5-trien-8, 12-lactone] (35), isodonsesquitin A (36), taraxacin (37), sesquiterpene ketolactone (38), taraxasteryl acetate (39), phi-taraxasteryl acetate (40) and lupenol acetate (41), palmitic acid (42), beta-sitosterol (43), and stigmasterol (44). CONCLUSION: Four compounds (14, 15, 34 and 35) were new compounds, compounds 1, 3, 6-13, 20-22, 30 and 31 were isolated from this genus for the first time, while compounds 18, 23-29, 32 and 37-42 were obtained from this species for the first time.

[Sesquiterpenes from stems and leaves of Curcuma wenyujin].

OBJECTIVE: To study the chemical constituents of the stem and leaves from Curcuma wenyujin. METHOD: The compounds were isolated by silica gel column chromatography in associating with Sephadex LH -20 chromatography. While their structures were identified on the basis of spectroscopic date. RESULT: Nine sesquiterpenes were isolated and identified. Their structures were identified as curdione (1), neocurdione (2), trans, trans-germacrone (3), cis, trans-germacrone (4), curcumenone (5), curcumadione (6), isoprocurcumenol (7), glechomanolide (8) and (1R, 10R)-( -)-1, 10-dihydrocurdione (9). CONCLUSION: All of these compounds were isolated from the stems and leaves of this plant for the first time.