Self-Stacked 3D Anisotropic BNNS Network Guided by Para-Aramid Nanofibers for Highly Thermal Conductive Dielectric Nanocomposites.

The enhancement of the heat-dissipation property of polymer-based composites is of great practical interest in modern electronics. Recently, the construction of a three-dimensional (3D) thermal pathway network structure for composites has become an attractive way. However, for most reported high thermal conductive composites, excellent properties are achieved at a high filler loading and the building of a 3D network structure usually requires complex steps, which greatly restrict the large-scale preparation and application of high thermal conductive polymer-based materials. Herein, utilizing the framework-forming characteristic of polymerization-induced para-aramid nanofibers (PANF) and the high thermal conductivity of hexagonal boron nitride nanosheets (BNNS), a 3D-laminated PANF-supported BNNS aerogel was successfully prepared via a simple vacuum-assisted self-stacking method, which could be used as a thermal conductive skeleton for epoxy resin (EP). The obtained PANF-BNNS/EP nanocomposite exhibits a high thermal conductivity of 3.66 W m-1 K-1 at only 13.2 vol % BNNS loading. The effectiveness of the heat conduction path was proved by finite element analysis. The PANF-BNNS/EP nanocomposite shows outstanding practical thermal management capability, excellent thermal stability, low dielectric constant, and dielectric loss, making it a reliable material for electronic packaging applications. This work also offers a potential and promotable strategy for the easy manufacture of 3D anisotropic high-efficiency thermal conductive network structures.

Magnetic-field modulation of topological electronic state and emergent magneto-transport in a magnetic Weyl semimetal.

The modulation of topological electronic state by an external magnetic field is highly desired for condensed-matter physics. Schemes to achieve this have been proposed theoretically, but few can be realized experimentally. Here, combining transverse transport, theoretical calculations, and scanning tunneling microscopy/spectroscopy (STM/S) investigations, we provide an observation that the topological electronic state, accompanied by an emergent magneto-transport phenomenon, was modulated by applying magnetic field through induced non-collinear magnetism in the magnetic Weyl semimetal EuB6. A giant unconventional anomalous Hall effect (UAHE) is found during the magnetization re-orientation from easy axes to hard ones in magnetic field, with a UAHE peak around the low field of 5 kOe. Under the reasonable spin-canting effect, the folding of the topological anti-crossing bands occurs, generating a strong Berry curvature that accounts for the observed UAHE. Field-dependent STM/S reveals a highly synchronous evolution of electronic density of states, with a dI/dV peak around the same field of 5 kOe, which provides evidence to the folded bands and excited UAHE by external magnetic fields. This finding elucidates the connection between the real-space non-collinear magnetism and the k-space topological electronic state and establishes a novel manner to engineer the magneto-transport behaviors of correlated electrons for future topological spintronics.

Teachers' learning from addressing the challenges of online teaching in a time of pandemic: a case in Shanghai.

Due to the COVID-19 pandemic in Shanghai, China, all school classes were delivered through an online environment from February 24 to May 22, 2020. To support this transition, the Shanghai Education Commission led expert teachers and specialists to develop a series of online video lessons based on the Shanghai unified curriculum, and suggested students watch the online video lessons individually from home, followed by an online synchronous lesson supported by class teachers. This study investigated what primary mathematics teachers learned from addressing these challenges through a case study. By following two purposefully selected teachers over 2 weeks during the transition, multiple data sets including online video lessons, online synchronous lessons, daily reflections, and post-online teacher interviews were collected. A fine-grained analysis of the data from the lens of the documentational approach to didactics found that teachers adaptively used online video lessons as important resources for their online synchronous lessons and virtual Teaching Research Groups as a teachers' collaboration mechanism supported them to develop online video lessons and address various technological constraints. Finally, implications of this case study for mathematics education globally are discussed. Supplementary Information: The online version contains supplementary material available at 10.1007/s10649-022-10172-2.

SnTe thermoelectric materials with low lattice thermal conductivity synthesized by a self-propagating method under a high-gravity field.

The conventional fabrication methods (for example, melting and powder metallurgy) of bulk thermoelectric materials are time- and energy-consuming, which restrict their large-scale application. In this work, ultra-fast self-propagating synthesis under a high-gravity field was used to prepare SnTe bulks, which shortened the synthesis time from several days to a few seconds. The grain growth was suppressed and some small pores were reserved in the matrix during the ultra-fast solidification process. The increased grain boundaries and pores (nanoscale to micron scale) enhanced phonon scattering, which greatly decreased the lattice thermal conductivity. The obtained minimum lattice thermal conductivity is 0.81 W m-1 K-1, and the maximum zT value is 0.5 (873 K), which is comparable to the best reported results of the undoped SnTe alloy. The ultra-fast non-equilibrium synthesis technique opens up new possibilities to prepare high-efficiency bulk thermoelectric materials with reduced time and energy consumption.

Scaling of Berry-curvature monopole dominated large linear positive magnetoresistance.

The linear positive magnetoresistance (LPMR) is a widely observed phenomenon in topological materials, which is promising for potential applications on topological spintronics. However, its mechanism remains ambiguous yet, and the effect is thus uncontrollable. Here, we report a quantitative scaling model that correlates the LPMR with the Berry curvature, based on a ferromagnetic Weyl semimetal CoS2 that bears the largest LPMR of over 500% at 2 K and 9 T, among known magnetic topological semimetals. In this system, masses of Weyl nodes existing near the Fermi level, revealed by theoretical calculations, serve as Berry-curvature monopoles and low-effective-mass carriers. Based on the Weyl picture, we propose a relation [Formula: see text], with B being the applied magnetic field and [Formula: see text] the average Berry curvature near the Fermi surface, and further introduce temperature factor to both MR/B slope (MR per unit field) and anomalous Hall conductivity, which establishes the connection between the model and experimental measurements. A clear picture of the linearly slowing down of carriers, i.e., the LPMR effect, is demonstrated under the cooperation of the k-space Berry curvature and real-space magnetic field. Our study not only provides experimental evidence of Berry curvature-induced LPMR but also promotes the common understanding and functional designing of the large Berry-curvature MR in topological Dirac/Weyl systems for magnetic sensing or information storage.

Serum Sestrin2 Was Lower in Septic Shock Patients with Cardiomyopathy.

Background: To determine the clinical significance of variations in serum sestrin2 protein levels in the development of septic cardiomyopathy in septic shock patients. Methods: The serum sestrin2 concentrations of each sample were determined using ELISA in a total of 67 control persons and 188 patients with septic shock. Furthermore, using transthoracic echocardiography, septic shock patients were split into two groups based on whether or not cardiomyopathy had developed, and the differences in each index between the two groups were analyzed. We looked at the relationship between serum sestrin2 levels, norepinephrine dosage, and NTproBNP levels. The influencing variables for the prediction of septic cardiomyopathy linked with the development of septic cardiomyopathy and clinical prognosis in septic cardiomyopathy were determined using multivariate binary logistic regression. Results: Assessment of left ventricular systolic function by measurement of LVEF revealed that 61/188 (32.4%) of the 188 patients with septic shock included in the research satisfied the diagnostic criteria for septic cardiomyopathy. (1) Sestrin2 protein levels showed a significant difference between septic shock and healthy controls (p < 0.01). (2) Compared to the group without septic cardiomyopathy, the group with combined septic cardiomyopathy had lower serum sestrin2 protein levels (p < 0.05), lower systolic blood pressure (p < 0.05), and higher plasma NTproBNP levels (p < 0.01) and used greater norepinephrine dosages (p < 0.01). The levels of serum sestrin2 protein revealed a little negative relationship with NTproBNP and norepinephrine dose. However, a binary logistic regression analysis revealed that none of these factors was an independent predictor of septic shock. (3) Age, lactate level, SOFA score, positive bacteremia, and sestrin2 protein were shown to be substantial discrepancies in clinical outcomes in patients with septic cardiomyopathy, becoming variables that impact clinical outcomes. Positive bacteremia (p = 0.031, OR = 5.084), SOFA score (p = 0.021, OR = 1.304), and sestrin2 protein (p = 0.039, OR = 0.897) were revealed to have independent influences in predicting clinical mortality outcome in septic cardiomyopathy using multivariate binary logistic regression. Conclusion: High serum sestrin2 levels clearly distinguish septic shock patients from healthy controls, whereas low serum sestrin2 levels are related with cardiac dysfunction to some extent but are not an independent influence factor for septic cardiomyopathy. Low serum sestrin2 levels were shown to be useful in predicting clinical outcome in patients with septic cardiomyopathy.

Teachers' changes when addressing the challenges in unexpected migration to online mathematics teaching during the COVID-19 pandemic: a case study in Shanghai.

In the research reported in this paper we investigated teachers' changes when adopting and adapting to emergency online teaching during the COVID-19 pandemic, from the perspective of the Interconnected Model of Professional Growth (IMPG). By adapting complementary accounts methodology to research into teachers' changes when addressing the unexpected migration to online teaching, an integrated data set, including online teaching videos, teacher daily reflections, and teacher interviews from two purposefully selected teachers over two weeks of online teaching, was collected and analyzed qualitatively. Both teachers encountered different difficulties and thus had different knowledge changes displayed in different change routes. For the experienced teacher, students' mistakes in homework and her online teaching practice triggered her knowledge changes. For the young teacher, the online video lessons, relevant resources on the Internet and students' performance were her primary sources that triggered the changes of her knowledge for teaching. These differences between the experienced teacher and young teacher provide evidence of the complexity of teacher's professional growth, which is related to a variety of external and internal factors. This study demonstrates how the IMPG model helps uncover teachers' changes in such an unprecedented virtual-teaching environment. Finally, the implications of this study for teacher professional development in general are discussed. Supplementary Information: The online version contains supplementary material available at 10.1007/s11858-022-01378-y.

Integration of negative, zero and positive linear thermal expansion makes borate optical crystals light transmission temperature-independent.

Negative and zero thermal expansion (NTE and ZTE) materials are widely adopted to eliminate the harmful effect from the "heat expansion and cool contraction" effect and frequently embrace novel fundamental physicochemical mechanisms. To date, the manipulation of NTE and ZTE materials has mainly been realized by chemical component regulation. Here, we propose another method by making use of the anisotropy of thermal expansion in noncubic single crystals, with maximal tunability from the integration of linear NTE, ZTE and positive thermal expansion (PTE). We demonstrate this concept in borate optical crystals of AEB2O4 (AE = Ca or Sr) to make the light transmission temperature-independent by counterbalancing the thermal expansion and thermo-optics coefficient. We further reveal that such a unique thermal expansion behavior in AEB2O4 arises from the synergetic thermal excitation of bond stretching in ionic [AEO8] and rotation between covalent [BO3] groups. This work has significant implications for understanding the thermal excitation of lattice vibrations in crystals and promoting the functionalization of anomalous thermal expansion materials.

Enhanced Performance of ΔTad upon Frequent Alternating Magnetic Fields in FeRh Alloys by Introducing Second Phases.

The cyclability and frequency dependence of the adiabatic temperature change (ΔTad) under an alternating magnetic field (AMF) are significantly important from the viewpoint of refrigeration application. Our studies demonstrated, by direct measurements, that the cyclability and low-magnetic-field performance of ΔTad in FeRh alloys can be largely enhanced by introducing second phases. The ΔTad under a 1.8 T, 0.13 Hz AMF is reduced by 14%, which is much better than that (40-50%) of monophase FeRh previously reported. More importantly, the introduction of second phases enables the antiferromagnetic-ferromagnetic phase transition to be driven by a lower magnetic field. Thus, ΔTad is significantly enhanced under a 0.62 T, 1 Hz AMF, and its value is 70% larger than that of monophase FeRh previously reported. Although frequency dependence of ΔTad occurs, the specific cooling power largely increases by 11 times from 0.17 to 1.9 W/g, as the frequency increases from 1 to 18.4 Hz under an AMF of 0.62 T. Our analysis of the phase transition dynamics based on magnetic relaxation measurements indicates that the activation energy barrier is lowered owing to the existence of second phases in FeRh alloys, which should be responsible for the reduction of the driving field. This work provides an effective way to enhance the cyclability and low-magnetic-field performance of ΔTad under an AMF in FeRh alloys by introducing second phases.

Correlation of Tunable CoSi4 Tetrahedron with the Superconducting Properties of LaCoSi.

It is known that as the FeAs4 tetrahedron in the Fe-based superconductor is close to the regular tetrahedron, critical temperature (Tc) can be greatly increased. Recently, a Co-based superconductor of LaCoSi (4 K) with "111" structure was found. In this work, we improve the Tc of LaCoSi through structural regulation. Tc can be increased by the chemical substitution of Co by Fe, while the superconductivity is suppressed by the Ni substitution. The combined analysis of neutron and synchrotron X-ray powder diffractions reveals that the change of the Si-Co-Si bond angles of the CoSi4 tetrahedron is possibly responsible for the determination of superconducting properties. The Fe chemical substitution is favorable for the formation of the regular tetrahedron of CoSi4. The present new Co-based superconductor of LaCoSi provides a possible method to enhance the superconductivity performance of the Co-based superconductors via controlling Co-based tetrahedra similar to those well established in the Fe-based superconductors.

Simultaneous Conduction and Valence Band Regulation of Indium-Based Quantum Dots for Efficient H2 Photogeneration.

Indium-based chalcogenide semiconductors have been served as the promising candidates for solar H2 evolution reaction, however, the related studies are still in its infancy and the enhancement of efficiency remains a grand challenge. Here, we report that the photocatalytic H2 evolution activity of quantized indium chalcogenide semiconductors could be dramatically aroused by the co-decoration of transition metal Zn and Cu. Different from the traditional metal ion doping strategies which only focus on narrowing bandgap for robust visible light harvesting, the conduction and valence band are coordinately regulated to realize the bandgap narrowing and the raising of thermodynamic driving force for proton reduction, simultaneously. Therefore, the as-prepared noble metal-free Cu0.4-ZnIn2S4 quantum dots (QDs) exhibits extraordinary activity for photocatalytic H2 evolution. Under optimal conditions, the Cu0.4-ZnIn2S4 QDs could produce H2 with the rate of 144.4 µmol h-1 mg-1, 480-fold and 6-fold higher than that of pristine In2S3 QDs and Cu-doped In2S3 QDs counterparts respectively, which is even comparable with the state-of-the-art cadmium chalcogenides QDs.

Superconductivity in Co-Layered LaCoSi.

It is known that few Co-based superconducting compounds have been found compared with their Fe- or Ni-based counterparts. In this study, we have found superconductivity of 4 K in the LaCoSi compound for the first time. The combined analysis of neutron and synchrotron X-ray powder diffractions reveals that LaCoSi exhibits an isostructure with the known Fe-based LiFeAs superconductor, which is the first "111" Co-based superconductor. First-principles calculation shows that LaCoSi presents a quasi-two-dimensional band structure that is also similar to that of LiFeAs. The small structural distortion may be more conducive to the emergence of superconductivity in the LaCoSi compound, which provides a direction for finding new Co-based superconducting compounds.

Highly Compressible, Thermally Conductive, yet Electrically Insulating Fluorinated Graphene Aerogel.

Carbon-based aerogels have drawn substantial attention for a wide scope of applications. However, the high intrinsic electrical conductivity limits their potential thermal management application in electronic packaging materials. Herein, a highly compressible, thermally conductive, yet electrically insulating fluorinated graphene aerogel (FGA) is developed through a hydrofluoric acid-assisted hydrothermal process. The macroscopic-assembled FGA constituting of tailored interconnected graphene networks with tunable fluorine coverage shows excellent elasticity and fatigue resistance for compression, despite a low density of 10.6 mg cm-3. Moreover, the aerogel is proved to be highly insulating, with the observed lowest electrical conductivity reaching 4 × 10-7 S cm-1. Meanwhile, the aerogel exhibits prominent heat dissipation performance in a typical cooling procedure, which can be used to fabricate thermoconductive polymer composites for electronic packaging.

Achieving High Performances of Ultra-Low Thermal Expansion and High Thermal Conductivity in 0.5PbTiO3-0.5(Bi0.9La0.1)FeO3@Cu Core-Shell Composite.

Achieving high performances of ultra-low thermal expansion (ULTE) and high thermal conductivity remains challenging, due to the strong phonon/electron-lattice coupling in ULTE materials. In this study, the challenge has been solved via the construction of the core-shell structure in 0.5PbTiO3-0.5(Bi0.9La0.1)FeO3@Cu composites by the electroless plating, which can simultaneously combine the advantages of the negative thermal expansion material of 0.5PbTiO3-0.5(Bi0.9La0.1)FeO3 in controlling thermal expansion, and copper metal in high thermal conductivity. By changing the volume fraction of copper, the coefficient of thermal expansion of composites can be adjusted continuously from positive to negative. In particular, a ULTE (ΔT = 400 K) has been achieved in the composite of 35 vol % Cu. Intriguingly, a 3D thermal conductive network copper structure is formed for thermal conducting, which can double the thermal conductivity of the 35 vol % Cu composite from the methods by the traditional mixing (32 W·m-1·K-1) up to the core-shell structure (60 W·m-1·K-1). The present work not only provides a composite material with excellent comprehensive properties but also proposes a general chemical method to resolve the problem of low thermal conductivity in most ULTE materials.

Transforming Thermal Expansion from Positive to Negative: The Case of Cubic Magnetic Compounds of (Zr,Nb)Fe2.

Negative thermal expansion (NTE) is an intriguing property for not only fundamental studies but also technological applications. However, few NTE materials are available compared with the huge amount of positive thermal expansion materials. The discovery of new NTE materials remains challenging. Here we report a chemical modification strategy to transform thermal expansion from positive to negative in cubic magnetic compounds of (Zr,Nb)Fe2 by tuning the magnetic exchange interaction. Furthermore, an isotropic zero thermal expansion can be established in Zr0.8Nb0.2Fe2 (αl = 1.4 × 10-6 K-1, 3-470 K) over a broad temperature range that is even wider than that of the prototype Invar alloy of Fe0.64Ni0.36. The NTE of (Zr,Nb)Fe2 is originated from the weakened magnetic exchange interaction and the increased d electrons of Fe by the Nb chemical substitution, so that the magnetovolume effect overwhelms the contribution of anharmonic lattice vibration.

Self-Assembled Boron Nitride Nanotube Reinforced Graphene Oxide Aerogels for Dielectric Nanocomposites with High Thermal Management Capability.

Thermally conductive polymeric composites are highly promising in current energy devices such as light-emitting diodes, integrated circuits, and solar cells to achieve appropriate thermal management. However, the introduction of traditional thermoconductive fillers into a polymer usually results in low thermal conductivity enhancement. Here, an ideal dielectric epoxy nanocomposite with ultrahigh thermal conductivity is successfully fabricated using three-dimensional interconnected boron nitride nanotube reinforced graphene oxide nanosheet (3D-BNNT-GONS) aerogels as fillers. The nanocomposite exhibits a nearly 20-fold increase in thermal conductivity with only 11.6 vol % loading fraction. Meanwhile, the nanocomposite possesses excellent insulation performance, including low dielectric constant, low dielectric loss, and high breakdown strength. A heating and cooling process reveals that the nanocomposite has a fast response of surface temperature, indicating high thermal management capability.

Optimization of Boron Nitride Sphere Loading in Epoxy: Enhanced Thermal Conductivity and Excellent Electrical Insulation.

Thermally conductive but electrically insulating materials are highly desirable for thermal management applications in electrical encapsulation and future energy fields, for instance, superconducting magnet insulation in nuclear fusion systems. However, the traditional approaches usually suffer from inefficient and anisotropic enhancement of thermal conductivity or deterioration of electrical insulating property. In this study, using boron nitride sphere (BNS) agglomerated by boron nitride (BN) sheets as fillers, we fabricate a series of epoxy/BNS composites by a new approach, namely gravity-mix, and realize the controllable BNS loading fractions in the wide range of 5-40 wt%. The composites exhibited thermal conductivity of about 765% and enhancement at BNS loading of 40 wt%. The thermal conductivity up to 0.84 W·m-1·K-1 at 77 K and 1.66 W·m-1·K-1 at 298 K was observed in preservation of a higher dielectric constant and a lower dielectric loss, as expected, because boron nitride is a naturally dielectric material. It is worth noting that the thermal property was almost isotropous on account of the spherical structure of BNS in epoxy. Meanwhile, the reduction of the coefficient of thermal expansion (CTE) was largely reduced, by up to 42.5% at a temperature range of 77-298 K.

Adjustable Magnetic Phase Transition Inducing Unusual Zero Thermal Expansion in Cubic RCo2-Based Intermetallic Compounds (R = Rare Earth).

Metallic materials that exhibit negligible thermal expansion or zero thermal expansion (ZTE) have great merit for practical applications, but these materials are rare and their thermal expansions are difficult to control. Here, we successfully tailored the thermal expansion behaviors from strongly but abruptly negative to zero over wide temperature ranges in a series of (Gd,R)(Co,Fe)2 (R = Dy, Ho, Er) intermetallic compounds by tuning the composition to bring the first-order magnetic phase transition to second-order. Interestingly, an unusual isotropic ZTE property with a coefficient of thermal expansion of α l = 0.16(0) × 10-6 K-1 was achieved in cubic Gd0.25Dy0.75Co1.93Fe0.07 (GDCF) in the temperature range of 10-275 K. The short-wavelength neutron powder diffraction, synchrotron X-ray diffraction, and magnetic measurement studies evidence that this ZTE behavior was ascribed to the rare-earth-moment-dominated spontaneous volume magnetostriction, which can be controlled by an adjustable magnetic phase transition. The present work extends the scope of the ZTE family and provides an effective approach to exploring ZTE materials, such as by adjusting the magnetism or ferroelectricity-related phase transition in the family of functional materials.

Negative Thermal Expansion in (Hf,Ti)Fe2 Induced by the Ferromagnetic and Antiferromagnetic Phase Coexistence.

Negative thermal expansion (NTE) is an intriguing physical phenomenon that can be used in the applications of thermal expansion adjustment of materials. In this study, we report a NTE compound of (Hf,Ti)Fe2, while both end members of HfFe2 and TiFe2 show positive thermal expansion. The results reveal that phase coexistence is detected in the whole NTE zone, in which one phase is ferromagnetic (FM), while the other is antiferromagnetic (AFM). With increasing temperature, the FM phase is gradually transformed to the AFM one. The NTE phenomenon occurs in the present (Hf,Ti)Fe2 because of the fact that the unit cell volume of the AFM phase is smaller than that of the FM phase, and the mass fraction of the AFM phase increases with increasing temperature. The construction of phase coexistence can be a method to achieve NTE materials in future studies.