Utilizing different types of biomass materials to modify steel slag for the preparation of composite materials used in the adsorption and solidification of Pb in solutions and soil.

This study utilized discarded steel slag (SS) as raw material and prepared modified steel slag materials (SS-SBC, SS-NBC, SS-BHA) through modification with biomass materials such as straw biochar (SBC), nutshell biochar (NBC), and biochemical humic acid (BHA). These materials were then applied for the removal of Pb from both solution and soil. The physical and chemical properties of the materials were analyzed using characterization techniques such as SEM, EDS, XRD, and BET. The specific surface area of the modified materials increased from the original 3.8584 m2/g to 34.7133 m2/g, 181.7329 m2/g, and 7.7384 m2/g, respectively. The study then explored the influence of different adsorption conditions on the adsorption capacity of Pb in solution, determining the optimal conditions as follows: initial concentration of 200 mg/L, adsorbent mass of 0.04 g, temperature of 15 °C, and pH = 2. To further investigate the adsorption process, kinetic and isotherm models were established. The results indicated that the adsorption process for all three materials followed a pseudo-second-order kinetic model and Freundlich isotherm model, suggesting a multi-layer chemical adsorption. Thermodynamic analysis revealed that the adsorption process was an exothermic spontaneous reaction. Soil cultivation experiments were conducted to explore the effects of different material addition amounts and cultivation times on the passivation of Pb-polluted soil. Analysis of heavy metal forms in the soil revealed that the addition of modified materials reduced the acid-extractable form of Pb in the soil and increased the residual form, which is beneficial for reducing the migration of Pb in the soil. FT-IR and XPS analyses were employed to study the functional groups, element composition, and valence states before and after adsorption passivation of Pb by the three materials. The results confirmed that the adsorption mechanisms of SS-SBC, SS-NBC, and SS-BHA mainly involved electrostatic adsorption, ion and ligand exchange, and surface precipitation. This study not only provides a new material for adsorbing and immobilizing heavy metals in soil and water but also offers a new approach for the resource utilization of steel slag waste.

Estimation of heavy metal soil contamination distribution, hazard probability, and population at risk by machine learning prediction modeling in Guangxi, China.

Due to superposition of diverse pollution sources, soil heavy metal concentrations have been detected to exceed the recommended maximum permissible levels in many areas of Guangxi province, China. However, the heavy metal contamination distribution, hazard probability, and population at risk of heavy metals in the entire Guangxi province remain largely unclear. In this study, machine learning prediction models with different standard risk values determined according to land use types were used to identify high-risk areas and estimate populations at risk of Cr and Ni based on 658 topsoil samples from Guangxi province, China. Our results showed that soil Cr and Ni contamination derived from carbonate rocks was relatively serious in Guangxi province, and that their co-enrichment during soil formation was associated with Fe and Mn oxides and alkaline soil environment. Our established model exhibited excellent performance in predicting contamination distribution (R2 > 0.85) and hazard probability (AUC>0.85). Pollution of Cr and Ni exhibited a pattern of decreasing gradually from the central-west areas to the surrounding areas with the polluted area (Igeo>0) of Cr and Ni accounting for approximately 24.46% and 29.24% of total area in Guangxi province, respectively, but only 10.4% and 8.51% of total area was classified as Cr and Ni high-risk regions. We estimated approximately 1.44 and 1.47 million people were potentially exposed to the risk of Cr and Ni contamination, which were mainly concentrated in the Nanning, Laibin, and Guigang. These regions are main heavily-populated agricultural regions in Guangxi, and thus heavy metal contamination localization and risk control in these regions are urgent and essential from the perspective of food safety.

Spatial prediction and influencing factors identification of potential toxic element contamination in soil of different karst landform regions using integration model.

The prediction of contamination distribution of potentially toxic elements (PTEs) in soils of Guangxi province, China and the identification of their controlling factors pose great challenges due to diverse bedrock types, intense leaching and weathering, and discontinuous terrain distributions. Herein, we integrated the random forest (RF) and empirical Bayesian kriging (EBK) to interpret and predict complex PTEs contamination distribution from three different karst landform regions (fenglin, fengcong, isolated peak plain) in Guangxi province. The modeling results are compared with the commonly used ordinary kriging and regression-kriging. In this study, our developed RF-EBK model combines the advantages of the RF and EBK model to promote the prediction accurately and efficiently. In this study, it was shown that the integration RF-EBK model exhibited desirable for Cd and As concentrations, with R2 of 0.89 and 0.83, respectively. The average RMSE and MAE of integration RF-EBK model decreased by 39% and 44%, respectively, relative to the regression-kriging with the second highest accuracy. Furthermore, the modeling results showed that approximately 41.96% and 18.96% of total area was classified as Cd and As polluted and above regions (Igeo >0) in Guangxi province, respectively. Higher Cd concentration was observed in the soil of fenglin and fengcong regions than that in isolated peak plain region due to the secondary enrichment and parent rock inheritance, while the As concentration exhibited no significant difference among the three regions. The modeling results indicated that the elevated Cd concentration might be associated with soil CaO concentration and alkaline soil environment, whereas As concentration tended to be increased with the elevating Fe2O3 concentrations in weakly acidic soil environment. This result confirmed the applicability and effectiveness of integration model in predicting complex spatial patterns of soil PTEs and identifying their controlling factors.

Two recyclable and complementary adsorbents of coal-based and bio-based humic acids: High efficient adsorption and immobilization remediation for Pb(II) contaminated water and soil.

Humic acid can effectively bind heavy metals and is a promising remediation agent for heavy metals-contaminated water and soil. Many successful applications of humic acid have been reported, but rarely studied the specific process and mechanism of heavy metal removal by humic acids from water and soil, especially the simultaneous application of coal-based and bio-based humic acids. In this work, two kinds of coal-based and bio-based humic acid materials (CHA and BHA) from weathered coal and rice husk were industrially produced and studied their Pb(II) adsorption and immobilization characteristics and mechanisms in water and soil. The batch adsorption experiments obtained the Pb(II) adsorption by CHA and BHA both were spontaneous and endothermic monolayer chemisorption and controlled by three rate-limiting steps (bulk, film, and pore) in the adsorption process. CHA and BHA had highly efficient Pb(II) adsorption capacities, obtained their maximum adsorption capacity was 201 and 188 mg g-1, respectively. In addition to the two main adsorption mechanisms of ion exchange and surface complexation, electrostatic interaction, precipitation reaction, and π-π interaction were also involved. Soil culture experiments showed that CHA and BHA both exhibited a highly efficient immobilization effect on Pb(II)-contaminated soil, and CHA and BHA had a better synergistic promotion effect. Compared with the CK soil, the content of DTPA-Pb(II) decreased by 10.2-13.2% and the content of RES-Pb(II) increased by 14-22% in soils treated with different humic acids. Ion exchange, complexation, precipitation, and electrostatic attraction promote the transformation of unstable Pb(II) to stable Pb(II), which was of great significance for the immobilization of Pb(II) in soil. Overall, CHA and BHA have the potential to be used as green, efficient, and promising adsorbents to remove and immobilize Pb(II) from wastewater and soil.

Impact of Ecological Restoration on the Physicochemical Properties and Bacterial Communities in Alpine Mining Area Soils.

Ecological restoration has notably impacted microbe and soil characteristics in abandoned open pit mines, especially in alpine regions. Yet, the adaptive responses of microbial communities in the initial years of mine site restoration remain largely unexplored. This study endeavors to offer a thorough comprehension of soil properties and microbial dynamics during the initial phases of alpine mining land reclamation. It places emphasis on physicochemical properties and microbial community composition and evaluates the feasibility of phytoremediation, along with proposing subsequent measures. Our study employs spatial sequence instead of time-sequenceal sequence to investigate early-stage changes in soil microbes and physicochemical properties in alpine mining land reclamation. We used high-throughput sequencing for the 16S rRNA amplicon study. Over time, soil physicochemical properties improved noticeably. Soil pH shifted from neutral to alkaline (7.04-8.0), while soil electrical conductivity (EC) decreased to 77 µS·cm-1 in R_6a. Cation exchange capacity (CEC) initially decreased from R_2a (12.30-27.98 cmol·kg-1) and then increased. Soil organic matter increased from 17.7 to 43.2 g·kg-1 over time during mine reclamation and restoration. The dominant bacterial community consisted of Proteobacteria (33.94% to 52.09%), Acidobacteriota (4.94% to 15.88%), Bacteroidota (6.52% to 11.15%), Actinobacteriota (7.18% to 9.61%), and Firmicutes (4.52% to 16.80%) with varying relative abundances. Gene annotation of sequences from various reclamation years revealed general function prediction, translation, ribosome structure, cell wall/membrane/envelope biogenesis, nucleotide translocation, and metabolism, along with other related functions. Mine reclamation improved soil fertility and properties, with the R_6a treatment being the most effective. Starting in the 2nd year of reclamation, the effective phosphorus content and the dominance of microbial bacteria, notably the Bacillus content, decreased. Firmicute fertilization promoted phosphorus and bacterial growth. In conclusion, employing a blend of sequencing and experimental approaches, our study unveils early-stage enhancements in soil microbial and physicochemical properties during the reclamation of alpine mining areas. The results underscore the beneficial impacts of vegetation restoration on key properties, including soil fertility, pore structure, and bacterial community composition. Special attention is given to assessing the effectiveness of the R_6a treatment and identifying deficiencies in the R_2a treatment. It serves as a reference for addressing the challenges associated with soil fertility and microbial community structure restoration in high-altitude mining areas in Qinghai-Tibet. This holds great significance for soil and water conservation as well as vegetation restoration in alpine mining regions. Furthermore, it supports the sustainable restoration of local ecosystems.

Effects of composite environmental materials on the passivation and biochemical effectiveness of Pb and Cd in soil: Analyses at the ex-planta of the Pak-choi root and leave.

Passivation of soil heavy metals using environmental materials is an important method or important in situ remediation measure. There are more studies on inorganic environmental materials for heavy metal passivation, but not enough studies on organic and their composite environmental materials with inorganic ones. In order to reveal the passivation effect of coal-based ammoniated humic acid (CAHA), biochemical humic acid (BHA), biochar (BC) and other organic types and inorganic environmental materials such as zeolites (ZL) on soil heavy metals and their biological effectiveness. The microstructures of these materials were analyzed by Scanning electron microscope (SEM). The main components of the environmental materials were analyzed by Energy dispersive spectrometer (EDS), Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction spectrum (XRD) to elucidate the mechanism of passivation of heavy metals in soil by these environmental materials. The study was conducted to investigate the effects of different types of environmental materials and their combinations on the passivation effect and biological effectiveness of Pb and Cd complex contamination in soil by means of soil incubation and pot experiments using single-factor and multifactor multilevel orthogonal experimental designs. Soil incubation experiments proved that the effective state of soil Pb and Cd in T7 was reduced by 13.40% and 11.07%, respectively. The extreme difference analysis determined the optimized formulation of soil lead and cadmium passivation as BHA: CAHA: BC: ZL = 3.5:5:20:10. The pot experiment proved that the application of composite environmental materials led to the reduction of lead and cadmium content and increase of biomass of Pak-choi, and the optimal dosage of optimized composite environmental materials was 23.1 g/kg.

[System Construction and the Function Improvement of Ecological Carbon Sink in Coal Mining Areas Under the Carbon Neutral Strategy].

The loss of ecological carbon sinks often occurs in the process of coal resource development. Under the carbon neutral strategy, it is of great significance to explore technologies and models for improving ecological carbon sinks in coal mining areas. This study firstly addressed the system construction framework of the ecological carbon sink in coal mining areas, which included two levels of management mode and technical methods; three main categories of soil carbon sink, vegetation carbon sink, and wetland carbon sink; and several technical contents such as ecological carbon sink planning, carbon sink monitoring and investigation, carbon sink function improvement, and carbon sink loss prevention. The study analyzed the main types of ecological carbon sink (mainly involving soil carbon sinks and vegetation carbon sinks, whereas wetland carbon sinks were mainly related to coal mining subsidence areas with high groundwater level) and circumstances of carbon sink losses (including coal mining activities, the process of ecological vegetation construction, and ecological stability risk under long-term conditions) and proposed methods to improve ecological carbon sinks and prevent carbon sink losses for soil carbon sinks and vegetation carbon sinks in coal mining areas. The results can provide technical reference for the scientific research and engineering construction of ecological carbon sinks in coal mining areas.

Spatial distribution, geochemical behaviors and risk assessment of antimony in rivers around the antimony mine of Xikuangshan, Hunan Province, China.

Pollutants derived from antimony (Sb) mining can easily cause pollution of surrounding water bodies. However, qualitative source analysis of river pollution is mostly conducted, and quantitative source analysis is still lacking. A total of 21 water samples were collected to analyze the pollution status of the heavy metal element Sb, explore the Xikuangshan (XKS) area river heavy metals pollution mechanism, undertake quantitative analysis of the sources of pollution, and carry out irrigation water suitability assessment and potential ecological risk assessment. The results showed that, compared with the mining non-affected area, the maximum excess multiple of Sb in surface water and rivers in Hunan XKS area is 411.31. When the river fluid flows through the mining-affected area, the heavy metal element Sb content increases rapidly, and then decreases due to dilution process. Positive matrix factorization (PMF) source analysis showed that the main source of Sb pollution in the rivers is the impact of mining and smelting (83.60%), followed by the role of waste rock leaching (16.40%). After irrigation, 27.78% of the river water had strong ecological risks, and 16.67% had extremely strong ecological risks. This achievement provides a theoretical basis and technical guarantee for protecting and using the local water body of the mining area.

Insight into degradation mechanism of PCBs from thermal desorption off-gas over iron-based catalysts.

Iron-based catalysts were developed to achieve the hydrodechlorination (HDC)/oxidation of polychlorinated biphenyls (PCBs) from thermal desorption off-gas, and Fe3O4/γ-Al2O3 showed higher dechlorination efficiency than Fe2O3/γ-Al2O3. The optimal Fe loading resulted in 95.5% degradation efficiency and 76.9% toxicity reduction of gaseous PCBs, and the optimal Fe3O4/γ-Al2O3 exhibited excellent stability during a 60-h test. The gas chromatography-mass spectrometry analysis of intermediate products indicated the presence of two competitive degradation pathways, namely, hydrodechlorination and oxidation with Fe3O4/γ-Al2O3 as catalyst. During the first stage (reductive dechlorination), the reductive activity of iron-based catalysts was effectively enhanced in the presence of water, which was confirmed by density functional theory (DFT) calculations. The removal of chlorine atoms was found in the order of meta > para > ortho. During the second stage (oxidation), hydroxyl and superoxide anion radicals were found to attack PCBs on the surface of Fe3O4/γ-Al2O3. This study provides an insight into the HDC and oxidation mechanism of gaseous PCBs over iron-based catalysts.

Application of stochastic model to assessment of heavy metal(loid)s source apportionment and bio-availability in rice fields of karst area.

Mining activities and high geological background are considered the important factors causing heavy metal(loid)s accumulation in rice fields of karst area. In this study, the contents, main sources, and the factors influencing bio-availability of heavy metal(loid)s were determined using conditional inference tree (CIT), random forest (RF), and geostatistical analyses with 105 soil samples collected from rice fields in karst area. Contamination by Cd, Hg, As, and Pb in soil was relatively serious in the study area in which the compound pollution was highly similar to that in the flooded area. CIT and RF effectively identified the contributions of natural and anthropogenic inputs of soil heavy metal(loid)s. Concentrations of Pb, As, and Hg were closely associated with human inputs whose cumulative contribution rates reached 68%, 87%, and 86%, respectively. Industrial activities (28%) and geogenic characteristics (44%) were primary sources of Cd accumulation. The soil pH, soil organic matter (SOM), distance from city center, the contents of heavy metal(loid)s in soil, and industry type were the most important factors influencing bio-availability of heavy metal(loid)s. Combined effect of multiple metals could not be ignored, in which As and Cd contributed over 80% to total non-carcinogenic risks for adults and children.

Adsorption of metals from oil sands process water (OSPW) under natural pH by sludge-based Biochar/Chitosan composite.

Some metals in oil sands process water (OSPW) are potential threats to human health and the environment. Hence, the removal of excess metals from OSPW is of great significance. In this study, anaerobic sludge waste from a wastewater treatment plant, was reused to prepare sludge-based biochar. A Biochar/Chitosan (Biochar/CS) adsorbent with excellent removal efficiency for metals (Cr, Cu, Se and Pb) in real OSPW was prepared through a facile hydrothermal method. The structural properties of the synthesized Biochar/CS composite were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) method. This study reports for the first time the removal of metals from OSPW under natural pH using Biochar/CS adsorbent. The composite exhibited a higher removal efficiency towards Cr (83.9%), Cu (97.5%), Se (87.9%) and Pb (94.3%) when the initial concentrations of Cr, Cu, Se and Pb were 0.02914, 0.06185, 0.00800 and 0.00516 mg/L, respectively, at a dosage of 0.5 g/L, compared with biochar or chitosan alone. The possible adsorption mechanism was proposed, and the enhanced removal ability was due to the improved specific surface area and pore volume, which increased by about 20 and 14 times as compared with chitosan. Functional groups in the composite, such as -NH2, -OH and some oxygen containing groups, were also responsible for the enhanced removal ability, which also might be the reason for the better performance of the composite than biochar alone due to the lack of functional groups on the biochar. Moreover, the adsorption process was best modelled by the Freundlich model, pseudo second order and intraparticle diffusion kinetic models. The results indicated that chemical adsorption might play the dominant role in the removal process. Overall, the Biochar/CS composite would be a promising and effective adsorbent for metals removal, owing to its advantages of being cost-effective and environmentally friendly.

Responses of Low-Quality Soil Microbial Community Structure and Activities to Application of a Mixed Material of Humic Acid, Biochar, and Super Absorbent Polymer.

Low-quality soil for land reuse is a crucial problem in vegetation quality and especially to waste disposal sites in mining areas. It is necessary to find suitable materials to improve the soil quality and especially to increase soil microbial diversity and activity. In this study, pot experiments were conducted to investigate the effect of a mixed material of humic acid, super absorbent polymer and biochar on low-quality soil indexes and the microbial community response. The indexes included soil physicochemical properties and the corresponding plant growth. The results showed that the mixed material could improve chemical properties and physical structure of soil by increasing the bulk density, porosity, macro aggregate, and promote the mineralization of nutrient elements in soil. The best performance was achieved by adding 3 g·kg-1 super absorbent polymer, 3 g·kg-1 humic acid, and 10 g·kg-1 biochar to soil with plant total nitrogen, dry weight and height increased by 85.18%, 266.41% and 74.06%, respectively. Physicochemical properties caused changes in soil microbial diversity. Acidobacteria, Bacteroidetes, Chloroflexi, Cyanobacteria, Firmicutes, Nitrospirae, Planctomycetes, and Proteobacteria were significantly positively correlated with most of the physical, chemical and plant indicators. Actinobacteria and Armatimonadetes were significantly negatively correlated with most measurement factors. Therefore, this study can contribute to improving the understanding of low-quality soil and how it affects soil microbial functions and sustainability.

Interaction and coexistence characteristics of dissolved organic matter with toxic metals and pesticides in shallow groundwater.

The long-term and large-scale utilization of fertilizers and pesticides in facility agriculture leads to groundwater pollution. However, the coexistence and interactions between organic fertilizers (i.e., organic matter), toxic metals, and pesticides in shallow groundwater have seldom been studied. Thus, the study sought to characterize said interactions via fluorescence, ultraviolet-visible spectroscopy (UV-Vis), and Fourier-transform infrared spectroscopy coupled with two-dimensional correlation spectroscopy and chemometric techniques. The results indicated that groundwater DOM was comprised of protein-, polysaccharide-, and lignin-like substances derived from organic fertilizers. Protein-like substances accounted for the binding of Co, Ni, and Fe, while polysaccharide- and lignin-like substances were mainly responsible for Cr and Mo complexation. Moreover, lignin- and polysaccharide-like substances played a key role in the binding of pesticides (i.e., dichlorodiphenyltrichloroethane [DDT], endosulfan, γ-hexachlorocyclohexane [γ-HCH], monocrotophos, chlorpyrifos, and chlorfenvinphos), rendering the conversion of γ-HCH to ß-hexachlorocyclohexane (ß-HCH) and the degradation of DDT to dichlorobenzene dichloroethylene (DDE) ineffective. However, the presence of protein-like substances in groundwater benefited the degradation and conversion of γ-HCH and α-endosulfan. Redundancy analyses showed that lignin- and polysaccharide-like matter had the most impacts on the coexistence of DOM with toxic metals and pesticides.

Nitrogen and phosphorus adsorption in aqueous solutions by humic acids from weathered coal: isotherm, kinetics and thermodynamic analysis.

The aim of this study was to reveal the mechanism of nitrogen and phosphorus adsorption by humic acids (HAs). HAs were extracted from weathered coal and used as adsorbents of urea-N and phosphate-P in water. The effect of different factors was considered, such as the initial concentration of urea-N and phosphate-P, temperature, and pH. The surface characteristics of the HAs were analyzed by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier transform infrared spectrometry. The results of batch adsorption experiments showed high effectiveness for nitrogen adsorption, the kinetics fitted with the pseudo-second-order model, and the isotherm followed the Langmuir model. For phosphorus adsorption, the data fitted well with the Weber and Morris model and the adsorption isotherms followed both the Langmuir and Freundlich isotherm models. The experimental results indicated that the adsorption behavior of HAs was both an endothermic and spontaneous process. These findings can be used as a reference for the mitigation of non-point source pollution and the application of fertilizer in agriculture.

Adsorption of cadmium and lead in wastewater by four kinds of biomass xanthates.

This study determined the adsorption of Cd2+ and Pb2+ (100 mg·L-1 of each) in simulated wastewater by biomass xanthates made from starch, chitosan, wheat stalk and corn stalk. The results showed that the adsorption efficiency of Pb2+ and Cd2+ ions followed the order: corn stalk xanthate > wheat stalk xanthate ≥ chitosan xanthate > starch xanthate. The results of kinetic modeling showed that the adsorption process was characterized by physical-chemical adsorption, and that a second-order kinetics equation described the adsorption process well. The optimum conditions for the adsorption of Cd2+ and Pb2+ by corn stalk xanthate were: adsorption time 2 hours, temperature 20-25 °C, and pH 6-8. The results serve as a reference for treating wastewater containing Cd2+ and Pb2+.

Remediating Potentially Toxic Metal and Organic Co-Contamination of Soil by Combining In Situ Solidification/Stabilization and Chemical Oxidation: Efficacy, Mechanism, and Evaluation.

Most soil remediation studies investigated single contaminants or multiple contaminants of the same type. However, in field conditions, soils are often contaminated with potentially both toxic metals and organic pollutants, posing a serious technical challenge. Here, batch experiments were conducted to evaluate the performance of combining in situ solidification/stabilization (ISS) and in situ chemical oxidation (ISCO) for the simultaneous removal of aniline (1000 mg/kg) and Cd (10 mg/kg). All four tested ISS amendments, especially quick lime and Portland cement, promoted in situ chemical oxidation with activated persulfate in contaminated soil. Combined ISS/ISCO remediation effectively removed aniline and reduced the bioavailable Cd content at optimal initial persulfate and ISS amendment concentrations of 1.08 mol/kg and 30 wt% with a seven-day curing time, and significantly reduced leaching. Persulfate inhibited the reduction of the bioavailable Cd content, and ISS amendment with persulfate did not synergistically remediate Cd in co-contaminated soil. Strong alkalinity and high temperature were the main mechanisms driving rapid pollutant removal and immobilization. The reaction of CaO with water released heat, and Ca(OH)2 formation increased the pH. The relative contributions of heat vs. alkaline activation, as well as the contaminant removal efficiency, increased with ISS amendment CaO content. Combined treatment altered the soil physicochemical properties, and significantly increased Ca and S contents. Activated persulfate-related reactions did not negatively impact unconfined compressive strength and hydraulic conductivity. This work improves the selection of persulfate activation methods for the treatment of soils co-contaminated with both potentially toxic metals and organic pollutants.

Elemental profile and oxygen isotope ratio (δ18O) for verifying the geographical origin of Chinese wines.

The elemental profile and oxygen isotope ratio (δ18O) of 188 wine samples collected from the Changji, Mile, and Changli regions in China were analyzed by inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma optical emission spectroscopy (ICP-OES) and isotope ratio mass spectrometry (IRMS), respectively. By combining the data of δ18O and the concentration data of 52 elements, the analysis of variance (ANOVA) technique was firstly applied to obtain the important descriptors for the discrimination of the three geographical origins. Ca, Al, Mg, B, Fe, K, Rb, Mn, Na, P, Co, Ga, As, Sr, and δ18O were identified as the key explanatory factors. In the second step, the key elements were employed as input variables for the subsequent partial least squares discrimination analysis (PLS-DA) and support vector machine (SVM) analyses. Then, cross validation and random data splitting (training set: test set = 70:30, %) were performed to avoid the over-fitting problem. The average correct classification rates of the PLS-DA and SVM models for the training set were both 98%, while for the test set, these values were 95%, 97%, respectively. Thus, it was suggested that the combination of oxygen isotope ratio (δ18O) and elemental profile with multi-step multivariate analysis is a promising approach for the verification of the considered three geographical origins of Chinese wines.

Correction to: Measurement of the 15N/14N ratio of phenylalanine in fermentation matrix by isotope ratio mass spectrometry.

The publisher was alerted that the following important entry in the references of this article was missing.

Measurement of the 15N/14N ratio of phenylalanine in fermentation matrix by isotope ratio mass spectrometry.

OBJECTIVES: To determine the origin of 15N-labeled phenylalanine in microbial metabolic flux analysis using 15N as a tracer, a method for measuring phenylalanine δ15N using HPLC coupled with elemental analysis-isotope ratio mass spectrometry (EA-IRMS) was developed. RESULTS: The original source of the 15N-labeled phenylalanine was determined using this new method that consists of three steps: optimization of the HPLC conditions, evaluation of the isotope fractionation effects, and evaluation of the effect of pre-processing on the phenylalanine nitrogen stable isotope. In addition, the use of a 15N-labeled inorganic nitrogen source, rather than 15N-labeled amino acids, was explored using this method. CONCLUSIONS: The method described here can also be applied to the analysis of metabolic flux.

Diversity of culturable aerobic denitrifying bacteria in the sediment, water and biofilms in Liangshui River of Beijing, China.

Aerobic denitrification is a process reducing the nitrate into gaseous nitrogen forms in the presence of oxygen gas, which makes the nitrification and denitrification performed simultaneously. However, little was known on the diversity of the culturable aerobic denitrifying bacteria in the surface water system. In this study, 116 strains of aerobic denitrifying bacteria were isolated from the sediment, water and biofilm samples in Liangshui River of Beijing. These bacteria were classified into 14 genera based on the 16 S rDNA, such as Pseudomonas, Rheinheimera, and Gemmobacter. The Pseudomonas sp., represented by the Pseudomonas stutzeri, Pseudomonas mendocina and Pseudomonas putida, composed the major culturable aerobic denitrifiers of the river, followed by Ochrobactrum sp. and Rheinheimera sp. The PCA plot showed the unclassified Pseudomonas sp. and Rheinheimera pacifica preferred to inhabit in biofilm phase while one unclassified Ochrobactrum sp. and Pseudomonas resinovorans had higher abundance in the sediment. In the overlying water, the Pseudomonas stutzeri and Ochrobactrum rhizosphaerae were found to have higher abundance, indicating these aerobic denitrifiers had different habitat-preferable characteristics among the 3 phases of river system. The findings may help select the niche to isolate the aerobic denitrifiers and facilitate the bioaugmentation-based purification of the nitrate polluted surface water.