Deterministic Formation and Growth of Dendritic Crystals of Attractive Colloids.

Dendrites are ubiquitous crystals produced in supersaturated solutions and supercooled melts, but considerably less is known about their formation and growth kinetics. Here, the key factors are explored that dictate dendrite formation and growth, utilizing experimental colloidal models in which the particles act as molecules with Mie potential. Depletion attraction is employed to colloids and manipulate their strength to control supersaturation. Dendrites are predominantly produced under conditions of low supersaturation, where the separation between crystals is large due to slow nucleation. The dendrites do not emerge directly from nuclei. Instead, isotropic grains, initially produced from nuclei, morph into polygons. Arms then sprout from the vertices of these polygons, eventually giving rise to dendrites. Triggering this polygon-to-dendrite transformation requires a high diffusional flux. This necessitates a prolonged diffusion time to maintain a steep concentration gradient in the surrounding environment even after the transformation from circular grains to polygons.

Auxetic Photonic Patterns with Ultrasensitive Mechanochromism.

Photonic crystals with mechanochromic properties are currently under intensive study to provide intuitive colorimetric detection of strains for various applications. However, the sensitivity of color change to strain is intrinsically limited, as the degree of deformation determines the wavelength shift. To overcome this limitation, auxetic photonic patterns that exhibit ultra-sensitive mechanochromism are designed. These patterns have a regular arrangement of cuts that expand to accommodate the strain, while the skeletal framework undergoes torsional deformation. Elastic photonic crystals composed of a non-close-packed array of colloidal particles are embedded in the cut area of the auxetic patterns. As the cut area amplifies the strains, the elastic photonic crystals show significant color change even for small total strains. The degree of local-strain amplification, or sensitivity of color change, is controllable by adjusting the width of cuts in the auxetic framework. In this work, a maximum sensitivity of up to 60 nm/% is achieved, which is 20 times higher than bulk films. It is believed that the auxetic photonic patterns with ultra-sensitive mechanochromism will provide new opportunities for the pragmatic use of mechanochromic materials in various fields, including structural health monitoring.

Fabrication of Superhydrophobic Water-Pinning Surfaces through Integration of Silica Colloids into Cellulose Nanocrystals.

The water-pinning effect is a phenomenon in which water droplets adhere to a surface and do not roll off, even when the surface is tilted or turned upside down. This effect holds great potential for applications in various areas, such as dew collection in arid regions, anti-drip function for a greenhouse, and liquid transport and control. However, creating surfaces that exhibit this effect poses challenges, necessitating materials with both hydrophobicity and high adhesive force along with a scalable, cost-effective method to produce the essential geometries that have not yet been established. To address these challenges, we propose a straightforward coating approach involving silica nanoparticles (SiO2) and cellulose nanocrystals (CNCs) to fabricate artificial water-pinning surfaces. We assessed the water-pinning ability of the coated surface through measurements of the contact angle, contact radius, and hysteresis. Remarkably, the coated surface exhibited a contact angle of approximately 153.87° and a contact radius of around 0.89 mm when a 10 µL water droplet was applied, demonstrating its resistance to rolling off, even at a tilting angle of 90°. The droplet only began to fall when its volume reached approximately 33 µL, requiring a substantial water pinning force of 323.4 µN. We also investigated the physicochemical characteristics of the SiO2@CNC coating surface, including morphology, chemical composition, and chemical structure, to unravel the underlying mechanism behind its water-pinning ability. Our proposed fabrication method offers a promising avenue for the development of functional biopolymer-based surfaces capable of precisely manipulating water droplets.

Advances in Colloidal Building Blocks: Toward Patchy Colloidal Clusters.

The scalable synthetic route to colloidal atoms has significantly advanced over the past two decades. Recently, colloidal clusters with DNA-coated cores called "patchy colloidal clusters" have been developed, providing a directional bonding with specific angle of rotation due to the shape complementarity between colloidal clusters. Through a DNA-mediated interlocking process, they are directly assembled into low-coordination colloidal structures, such as cubic diamond lattices. Herein, the significant progress in recent years in the synthesis of patchy colloidal clusters and their assembly in experiments and simulations is reviewed. Furthermore, an outlook is given on the emerging approaches to the patchy colloidal clusters and their potential applications in photonic crystals, metamaterials, topological photonic insulators, and separation membranes.

Direct Determination of the Phase Diagram of a Depletion-Mediated Colloidal System.

Depletion is one widely used potential to modulate colloidal interaction because it enables the production of a wide variety of crystalline and glassy phases of spherical and shape-tailored colloids. The attractive depletion potential gives rise to qualitatively new behavior. However, depletion-mediated phase behaviors have never been systematically investigated experimentally regarding pair potentials for aqueous suspensions. In this work, we implement three distinct phases of fluid, crystal, and glass by adjusting the concentrations of depletant and salt in the aqueous suspension of polystyrene particles. To define the phase boundary between the fluid and crystal, we calculate pair potential with a superposition of van der Waals, electrostatic, and depletion interactions. Two unknown parameters in the pair potential─the concentration of ionic impurities and the ratio of the molar concentration of depletant to osmolarity─are experimentally determined from sets of reflectance spectra. The interparticle spacing in the crystalline phase is extracted from the peak wavelength originating from Bragg diffraction, which corresponds to the interparticle separation at energy minimum in the pair potential. The boundary between the fluid and crystal is well defined with the depth of the energy well of 3kBT. By contrast, the onset of glass formation is better characterized by not the well depth but the assembly rate, which is estimated from the slope of the pair potential from force balance. Glasses are produced as the speed exceeds 300 µm/s. That is, crystals are produced by enthalpy gain overwhelming entropy loss, whereas glasses are kinetically produced due to fast jamming.

Effect of antimicrobial photodynamic therapy with Chlorella and Curcuma extract on Streptococcus mutans biofilms.

BACKGROUND: Antimicrobial photodynamic therapy (aPDT) using natural photosensitive agents is an effective method for preventing oral diseases of bacterial origin. The purpose of this study was to evaluate the antimicrobial effect of aPDT, using powdered extracts of Chlorella and Curcuma, on the biofilms of Streptococcus mutans (S. mutans), a bacterium that is known to cause dental caries. METHODS: Commercially available powdered Chlorella and Curcuma extracts were used as photosensitizers. S. mutans, cultured for 2 days, was inoculated (0.1 ml; 1 × 109 CFU/ml) on the surface of a hydroxyapatite (HA) disc and incubated for 24 h to allow the formation of a biofilm. The HA disc with the S. mutans biofilm was immersed in either Curcuma extract (0.5 mg/ml), Chlorella extract, distilled water (negative control), or Listerine (positive control) for 1 min and then irradiated with an LED (Qraycam; wavelength, 405 nm; energy, 59 mW) for 5 min. RESULTS: The application of aPDT with Curcuma or Chlorella extract to S. mutans 24-hour biofilms significantly decreased the number of viable cells and the live/dead cell ratio when compared with those in the negative control (distilled water; p < 0.05). CONCLUSIONS: aPDT using 405 nm light and Chlorella or Curcuma as a photosensitizer has significant antimicrobial effects against S. mutans biofilms. Thus, employing aPDT with natural plant extracts as photosensitizers could be an effective strategy for preventing dental caries but needs to be evaluated in properly controlled clinical trials..

Association between Irritable Bowel Syndrome and Risk of Osteoporosis in Korean Premenopausal Women.

OBJECTIVE: The objective of this study is to evaluate irritable bowel syndrome (IBS) as a risk factor for osteoporosis and osteoporotic fracture in Korean women after controlling for basic confounding factors and considering detailed demographic and clinical information. SUBJECTS AND METHODS: We performed a nationwide population-based retrospective cohort analysis and matched every IBS case with a non-IBS case at a 1:4 frequency ratio based on age. The population consisted of female patients with data in the Health Insurance Review and Assessment (HIRA) database from 2002 to 2010. To determine the risk of osteoporosis and osteoporotic fracture in IBS and non-IBS patients, hazard ratios (HRs) with 95% confidence intervals (CI) were estimated using Cox proportional hazards regression models, adjusting for confounding variables, such as the area of residence, health insurance type, and economic status. RESULTS: We identified 1,017,468 patients in the HIRA database with data from 2002 to 2010 who could potentially be included in the cohort. Among these, we identified 1,545 (11.4%) women (age >19 years) with newly diagnosed IBS (IBS group). Additionally, 6,180 patients without IBS and age-matched to the IBS group were selected. Cox modeling revealed that the crude HRs for osteoporosis and osteoporotic fractures in patients with IBS were 1.476 (95% CI, 1.241-1.754) and 1.427 (95% CI, 1.086-1.876), respectively. CONCLUSION: Our data showed an increased incidence of osteoporosis and osteoporotic fractures in women with IBS compared with age-matched controls.

Stiffness of the interface between a colloidal body-centered cubic crystal and its liquid.

Equilibrium interfaces were established between body-centered cubic (BCC) crystals and their liquid using charged colloidal particles in an electric bottle. By measuring a time series of interfacial positions and computing the average power spectrum, their interfacial stiffness was determined according to the capillary fluctuation method. For the (100) and the (114) interfaces, the stiffnesses were 0.15 and 0.18 [Formula: see text] (σ: particle diameter), respectively, and were isotropic in the plane of the interface. For comparison, similar charged colloids were used to create an interface between a face-centered cubic (FCC) crystal and its liquid. Its stiffness was significantly larger: 0.26 [Formula: see text] This result gives experimental support to the explanations offered for the preferential nucleation of BCC over FCC in metallic alloys.

Colloidal assembly in droplets: structures and optical properties.

Colloidal assembly in emulsion drops provides fundamental tools for studying optimum particle arrangement under spherical confinement and practical means for producing photonic microparticles. Recent progress has revealed that energetically favored cluster configurations are different from conventional supraballs, which could enhance optical performance. This paper reviews state-of-the-art emulsion-templated colloidal clusters, and particularly focuses on recently reported novel structures such as icosahedral, decahedral, and single-crystalline face-centered cubic (fcc) clusters. We classify the clusters according to the number of component particles as small (N < O(102)), medium (O(102) ≤N≤O(104)), and large (N≥O(105)). For each size of clusters, we discuss the detailed structures, mechanisms of cluster formation, and optical properties and potential applications. Finally, we outline current challenges and questions that require further investigation.

Real-Time Monitoring of Colloidal Crystallization in Electrostatically-Levitated Drops.

Colloidal crystallization is analogous to the crystallization in bulk atomic systems in various aspects, which has been explored as a model system. However, a real-time probing of the phenomenon still remains challenging. Here, a levitation system for a study of colloidal crystallization is demonstrated. Colloidal particles in a levitated droplet are gradually concentrated by isotropic evaporation of water from the surface of the droplet, resulting in crystallization. The structural change of the colloidal array during crystallization is investigated by simultaneously measuring the volume and reflectance spectra of the droplet. The crystal nucleates from the surface of the droplet at which the volume fraction exceeds the threshold and then the growth proceeds. The crystal growth behavior depends on the initial concentrations of colloidal particles and salts which determine the overall direction of crystal growth and interparticle spacing, respectively. The results show that a levitating bulk droplet has a great potential as a tool for in situ investigation of colloidal crystallization.

Hydration breaking and chemical ordering in a levitated NaCl solution droplet beyond the metastable zone width limit: evidence for the early stage of two-step nucleation.

For over two decades, NaCl nucleation from a supersaturated aqueous solution has been predicted to occur via a two-step nucleation (TSN) mechanism, i.e., two sequential events, the formation of locally dense liquid regions followed by structural ordering. However, the formation of dense liquid regions in the very early stage of TSN has never been experimentally observed. By using a state-of-the-art technique, a combination of electrostatic levitation (ESL) and in situ synchrotron X-ray and Raman scatterings, we find experimental evidence that indicates the formation of dense liquid regions in NaCl bulk solution at an unprecedentedly high level of supersaturation (S = 2.31). As supersaturation increases, evolution of ion clusters leads to chemical ordering, but no topological ordering, which is a precursor for forming the dense disordered regions of ion clusters at the early stage of TSN. Moreover, as the ion clusters proceed to evolve under highly supersaturated conditions, we observe the breakage of the water hydration structure indicating the stability limit of the dense liquid regions, and thus leading to nucleation. The evolution of solute clusters and breakage of hydration in highly supersaturated NaCl bulk solution will provide new insights into the detailed mechanism of TSN for many other aqueous solutions.

Photonic Microcapsules Containing Single-Crystal Colloidal Arrays with Optical Anisotropy.

Colloidal particles with a repulsive interparticle potential spontaneously form crystalline lattices, which are used as a motif for photonic materials. It is difficult to predict the crystal arrangement in spherical volume as lattices are incompatible with a spherical surface. Here, the optimum arrangement of charged colloids is experimentally investigated by encapsulating them in double-emulsion drops. Under conditions of strong interparticle repulsion, the colloidal crystal rapidly grows from the surface toward the center of the microcapsule, forming an onion-like arrangement. By contrast, for weak repulsion, crystallites slowly grow and fuse through rearrangement to form a single-crystal phase. Single-crystal structure is energetically favorable even for strong repulsion. Nevertheless, a high energy barrier to colloidal rearrangement kinetically arrests the onion-like structure formed by heterogeneous nucleation. Unlike the isotropic onion-shaped product, the anisotropic single-crystal-containing microcapsules selectively display-at certain orientations but not others-one of the distinct colors from the various crystal planes.

Coherence and pulse duration characterization of the PAL-XFEL in the hard X-ray regime.

We characterize the spatial and temporal coherence properties of hard X-ray pulses from the Pohang Accelerator Laboratory X-ray Free Electron Laser (PAL-XFEL, Pohang, Korea). The measurement of the single-shot speckle contrast, together with the introduction of corrections considering experimental conditions, allows obtaining an intrinsic degree of transverse coherence of 0.85 ± 0.06. In the Self-Amplified Spontaneous Emission regime, the analysis of the intensity distribution of X-ray pulses also provides an estimate for the number of longitudinal modes. For monochromatic and pink (i.e. natural bandwidth provided by the first harmonic of the undulator) beams, we observe that the number of temporal modes is 6.0 ± 0.4 and 90.0 ± 7.2, respectively. Assuming a coherence time of 2.06 fs and 0.14 fs for the monochromatic and pink beam respectively, we estimate an average X-ray pulse duration of 12.6 ± 1.0 fs.

Direct observation of crystallization and melting with colloids.

We study the kinetics of crystal growth and melting of two types of colloidal crystals: body-centered cubic (BCC) crystals and face-centered cubic (FCC) crystals. A dielectrophoretic "electric bottle" confines colloids, enabling precise control of the motion of the interface. We track the particle motion, and by introducing a structural order parameter, we measure the jump frequencies of particles to and from the crystal and determine from these the free-energy difference between the phases and the interface mobility. We find that the interface is rough in both BCC and FCC cases. Moreover, the jump frequencies correspond to those expected from the random walk of the particles, which translates to collision-limited growth in metallic systems. The mobility of the BCC interface is greater than that of the FCC interface. In addition, contrary to the prediction of some early computer simulations, we show that there is no significant asymmetry between the mobilities for crystallization and melting.

Clustering Effects of Metabolic Factors and the Risk of Metabolic Syndrome.

BACKGROUND: Metabolic syndrome is a major risk factor for cardiovascular disease. Clustering of a combination of individual factors that increase the actual rather than the expected prevalence might be helpful in understanding the pathophysiology of metabolic syndrome. The aim of this study was to analyze the most influential factors for metabolic syndrome to assess clustering factors of metabolic syndrome. METHODS: Subjects from the Korea National Health and Nutrition Examination Survey (KNHANES) VI were included in the present study. The status of health behaviors was obtained using the questionnaires included in the KNHANES VI. A complex, stratified, and multistage sampling design was used to analyze the data according to statistics from the Korea Centers for Disease Control and Prevention. RESULTS: A total of 2,101 men and 2,831 women aged older than 20 years were included in this study. In men, drinking alcohol more than twice per week was related with the prevalence of metabolic syndrome; while, in women, exercise was related with the prevalence of metabolic syndrome. The clustering effect was observed for more than three metabolic factors. In men, the clustering effect was strongest for the combination of hypertension, hyperglycemia, and hypertriglyceridemia. In women, the strongest clustering effect was observed for the combination of abdominal obesity, hypertriglyceridemia, and low high-density lipoprotein cholesterol concentration. CONCLUSION: The health behaviors affecting metabolic syndrome in men and women included drinking alcohol more than twice a week and exercising more than four times a week, respectively; in addition, hypertriglyceridemia most significantly influenced the clustering effect of metabolic syndrome.

The relationship between hypertension and sleep duration: an analysis of the fifth Korea National Health and Nutrition Examination Survey (KNHANES V-3).

INTRODUCTION: Hypertension is a significant risk factor for cardiovascular disease (CVD). The majority of patients, however, cannot easily maintain a healthy blood pressure. Therefore, lifestyle modifications are important and may include getting enough sleep. The purpose of this study was to determine the relationship between sleep duration and hypertension, as defined by the Joint National Committee (JNC) 7 and JNC 8 guidelines. METHODS: We used the data from 6,365 individuals aged ≥ 18 years based on national data from a representative sample of the 5(th) Korea National Health and Nutrition Examination Survey V-3 in 2012. The participants were divided into three categories: JNC 7, JNC 8, and newly excluded only. The duration of sleep was classified as less than 5, 6, 7, 8, or more than 9 hours. RESULTS: Compared with the appropriate sleep duration of 7 hours, with a sleep duration of less than 5 hours, the recommended pharmacological treatment of hypertension rate increased 1.908-fold (95% CI = 1.483-2.456) according to the JNC 8 guidelines and 1.864-fold (95% CI = 1.446-2.403) according to the JNC 7 guidelines. However, there was no statistical difference with the other sleep categories. DISCUSSION: The recommended hypertension treatment rate increased significantly in the less than 5 hours sleep group according to the JNC 8 guidelines. To manage hypertension effectively, it may be useful to maintain a lifestyle of sleeping more than 6 hours.

Controlled pixelation of inverse opaline structures towards reflection-mode displays.

Pixelated inverse opals with red, green, and blue colors were prepared by hybridizing convective assembly of colloidal particles and photolithography techniques. The brilliant structural colors, high mechanical stability, and small feature size of the pixels were simultaneously accomplished, thereby providing color reflectors potentially useful for display devices. Moreover, this hybridized method provides a general means to create multi-colored photonic crystals.

The association between 25-hydroxyvitamin D and mammographic density in healthy pre- and postmenopausal women regardless of the menstrual cycle phase: a cross-sectional study.

Vitamin D deficiency is a known risk factor of breast cancer. An association between vitamin D and breast density has been suggested; however, it remains controversial. The aim of this study was to determine the association between serum 25-hydroxyvitamin D [25(OH)D] level and mammographic density. Subjects in our study included 517 patients who visited the health promotion center of the University Hospital. Mammographic density was classified using the American College of Radiology, Breast Imaging Reporting and Data System. Analysis of variance was performed to clarify the association of serum 25(OH)D level and mammographic density, and odds ratio was calculated by ordinal logistic regression analysis. The mean serum 25(OH)D level was 14.3 ± 7.0 ng/mL in all subjects. In correlation analysis, weak negative correlation was observed between serum 25(OH)D level and mammographic density groups (r = -0.09, P = 0.049). However, ordinal logistic regression analysis showed no statistically significant association between serum 25(OH)D level and mammographic density (odds ratio: 0.75, 95% confidence interval: 0.50-1.13). Results of our study showed that there is no significant association between serum 25(OH)D level and mammographic density. It is thought to be an another mechanism of serum 25(OH)D level on breast cancer risk in addition to breast density.