High-speed atomic force microscope based on an astigmatic detection system.

High-speed atomic force microscopy (HS-AFM) enables visualizing dynamic behaviors of biological molecules under physiological conditions at a temporal resolution of 1s or shorter. A small cantilever with a high resonance frequency is crucial in increasing the scan speed. However, detecting mechanical resonances of small cantilevers is technically challenging. In this study, we constructed an atomic force microscope using a digital versatile disc (DVD) pickup head to detect cantilever deflections. In addition, a flexure-guided scanner and a sinusoidal scan method were implemented. In this work, we imaged a grating sample in air by using a regular cantilever and a small cantilever with a resonance frequency of 5.5 MHz. Poor tracking was seen at the scan rate of 50 line/s when a cantilever for regular AFM imaging was used. Using a small cantilever at the scan rate of 100 line/s revealed no significant degradation in the topographic images. The results indicate that a smaller cantilever can achieve a higher scan rate and superior force sensitivity. This work shows the potential for using a DVD pickup head in future HS-AFM technology.

Operation of astigmatic-detection atomic force microscopy in liquid environments.

The astigmatic detection system (ADS) based on commercial optical pickup head was demonstrated to achieve a sub-nanometer sensitivity in detecting the vertical movement of an object surface in air. The detection laser spot of the ADS was sub-µm and the detection bandwidth was over 80 MHz. These advantages allow detection of high-frequency mechanical resonance of very small objects, which would have many important applications in nanotechnology. In this work, we optimized the operation conditions of ADS to achieve good sensitivity in aqueous solutions. We demonstrated good contrast and good spatial resolution of cancer cells in water with the optical profilometry mode. We also built an ADS-AFM (atomic force microscopy) for imaging in water. A novel cantilever holder was designed, and the spurious peaks were suppressed down to 26.0% of the real resonance peak. Most importantly, we demonstrated that the ADS-AFM could resolve single atomic steps on a graphite substrate and image soft DNA molecules on mica in water.

Micromechanical PDGF recognition via lab-on-a-disc aptasensor arrays.

A plug-and-play CD-like platform is used to perform a statistical detection of platelet derived growth factor (PDGF) proteins through aptamer-based surface functionalization of multiple microcantilever arrays. When PDGF proteins bind to aptamer coatings, the cantilevers deflect. The deflection response is monitored by optical read-out units from a commercial DVD-ROM device. We report on the use of an improved sensing platform which facilitates measurements under continuous liquid flow and with temperature control. Also, the mechanical wobbling of the DVD-ROM platform has been minimized and the scanning system has been optimized in order to detect cantilever deflections in liquid with nanometer scale resolution. The capability of the sensing platform is demonstrated by detection of clinically relevant concentrations of PDGF proteins. We present statistical measurements on 100 microcantilevers at different concentrations of PDGF, ranging from 10 nM to 400 nM. Hereby it is possible to reliably characterize the averaged mechanical response of cantilevers as a function of protein concentration.

Anti-drift and auto-alignment mechanism for an astigmatic atomic force microscope system based on a digital versatile disk optical head.

In this work, an anti-drift and auto-alignment mechanism is applied to an astigmatic detection system (ADS)-based atomic force microscope (AFM) for drift compensation and cantilever alignment. The optical path of the ADS adopts a commercial digital versatile disc (DVD) optical head using the astigmatic focus error signal. The ADS-based astigmatic AFM is lightweight, compact size, low priced, and easy to use. Furthermore, the optical head is capable of measuring sub-atomic displacements of high-frequency AFM probes with a sub-micron laser spot (~570 nm, FWHM) and a high-working bandwidth (80 MHz). Nevertheless, conventional DVD optical heads suffer from signal drift problems. In a previous setup, signal drifts of even thousands of nanometers had been measured. With the anti-drift and auto-alignment mechanism, the signal drift is compensated by actuating a voice coil motor of the DVD optical head. A nearly zero signal drift was achieved. Additional benefits of this mechanism are automatic cantilever alignment and simplified design.