RESUMO
BACKGROUND: Prognostic factors for total shoulder arthroplasty (TSA) clinical outcomes are incompletely understood. This study investigates the associations of preoperative patient, disease-specific, and surgical factors with 1-year postoperative PENN Shoulder Score (PSS) in patients undergoing primary TSA. METHODS: Cleveland Clinic patients undergoing primary anatomic TSA (aTSA) or reverse TSA (rTSA) for glenohumeral osteoarthritis (GHOA) or rotator cuff tear arthropathy (CTA) between February 2015 and August 2019, and having complete preoperative and 1-year postoperative patient-reported outcome measures (PROMs), were included. Twenty preselected preoperative patient, disease-specific, and surgical factors were used to fit multivariable models for 1-year PSS and its subscores. RESULTS: Of 1427 eligible primary TSAs, 1174 had 1-year follow-up by PROMs (82%), with 1042 analyzed after additional exclusions, including 30% rTSAs for CTA (n = 308), 26% rTSAs for GHOA (n = 275), and 44% aTSAs for GHOA (n = 459). All PROMs showed statistically significant improvements postoperatively, with 89% of patients reaching an acceptable symptom state. Lower 1-year PSS was associated with younger age, female sex, current smoking, chronic pain diagnosis, history of prior surgery, worker's compensation claim, lower preoperative mental health, lower baseline PSS, absence of glenoid bone loss, and diagnosis-arthroplasty type (CTA-rTSA < GHOA-rTSA < GHOA-aTSA). The most important prognostic factors associated with 1-year PSS were diagnosis-arthroplasty type, baseline mental health status, and insurance status. CONCLUSIONS: Disease diagnosis, arthroplasty type, and several other baseline factors are strongly and individually associated with PROMs following primary TSA, with patients undergoing aTSA for GHOA demonstrating the highest PROM scores at 1-year follow-up. Patient, disease-specific, and surgical factors can be used to guide postoperative prognosis following primary TSA for improved preoperative patient counseling regarding expected outcomes of these procedures.
Assuntos
Artroplastia do Ombro , Osteoartrite , Medidas de Resultados Relatados pelo Paciente , Humanos , Artroplastia do Ombro/métodos , Masculino , Feminino , Idoso , Pessoa de Meia-Idade , Osteoartrite/cirurgia , Articulação do Ombro/cirurgia , Artropatia de Ruptura do Manguito Rotador/cirurgia , Estudos RetrospectivosRESUMO
Background: This study's purpose was to investigate the extent to which differences among operating surgeons may influence 1-year patient-reported outcome measures (PROMs) in patients undergoing rotator cuff repair (RCR) surgery, after controlling for general and disease-specific patient factors. We hypothesized that surgeon would be additionally associated with 1-year PROMs, specifically the baseline to 1-year improvement in Penn Shoulder Score (PSS). Methods: We used mixed multivariable statistical modeling to assess the influence of surgeon (and alternatively surgical case volume) on 1-year PSS improvement in patients undergoing RCR at a single health system in 2018, controlling for eight patient- and six disease-specific preoperative factors as possible confounders. Contributions of predictors to explaining variation in 1-year PSS improvement were measured and compared using Akaike's Information Criterion. Results: 518 cases performed by 28 surgeons met inclusion criteria, with median (quartiles) baseline PSS of 41.9 (31.9, 53.9) and 1-year PSS improvement of 42 (29.1, 55.3) points. Contrary to expectation, surgeon and surgical case volume were neither statistically significantly nor clinically meaningfully associated with 1-year PSS improvement. Baseline PSS and mental health status (VR-12 MCS) were the dominant and only statistically significant predictors of 1-year PSS improvement, with lower baseline PSS and higher VR-12 MCS predicting larger 1-year PSS improvement. Conclusion: Patients generally reported excellent 1-year outcomes following primary RCR. This study did not find evidence that the individual surgeon or surgeon case volume influences 1-year PROMs, independently of case-mix factors, following primary RCR in a large employed hospital system.
RESUMO
PURPOSE OF REVIEW: As reverse total shoulder arthroplasty indications have expanded and the incidence of its use has increased, developments in implant design have been a critical component of its success. The purpose of this review is to highlight the recent literature regarding the effect of implant design on reverse total shoulder arthroplasty biomechanics. RECENT FINDINGS: Implant design for reverse total shoulder arthroplasty has evolved considerably from the modern design developed by Paul Grammont. The Grammont design had a medialized center of rotation and distalized humerus resulting from a 155° humeral neck shaft angle. These changes intended to decrease the forces on the glenoid component, thereby decreasing the risk for implant loosening and improving the deltoid moment arm. However, these features also led to scapular notching. The Grammont design has been modified over the last 20 years to increase the lateral offset of the glenosphere and decrease the prosthetic humeral neck shaft angle to 135°. These changes were made to optimize functional range of motion while minimizing scapular notching and improving active external rotation strength. Lastly, the introduction of preoperative planning and patient-specific instrumentation has improved surgeon ability to accurately place implants and optimize impingement-free range of motion. Success and durability of the reverse total shoulder arthroplasty has been contingent upon changes in implant design, starting with the Grammont-style prosthesis. Current humeral and glenoid implant designs vary in parameters such as humeral and glenoid offset, humeral tray design, liner thickness, and neck-shaft angle. A better understanding of the biomechanical implications of these design parameters will allow us to optimize shoulder function and minimize implant-related complications after reverse total shoulder arthroplasty.
RESUMO
Background: Magnetic resonance imaging (MRI)-based rotator cuff assessment is often qualitative and subjective; few studies have tried to validate such preoperative assessments. This study investigates relationships of preoperative MRI assessments made by conventional approaches to intraoperative findings of tear type, location, and size or MRI-assessed muscle occupation ratio. Methods: Intraoperatively, surgeons assessed tear type, location, anterior-posterior (AP) width, and medial-lateral length in 102 rotator cuff repair patients. Two musculoskeletal radiologists independently assessed the preoperative MRI scans for these same parameters and supraspinatus muscle atrophy by both Warner classification and quantitative occupation ratio. Exact agreement proportions, kappa statistics, and correlation coefficients were used to quantify agreement relationships. Results: Agreement between MRI readers' and surgeons' observations of tear status averaged 93% with κ = 0.38, and that of tear location averaged 77% with κ = 0.50. Concordance correlations of MRI and intraoperative measures of anterior-posterior and medial-lateral tear length averaged 0.59 and 0.56 across readers, respectively. Despite excellent interrater agreement on Warner classification (exact agreement proportion 0.91) and occupation ratio (concordance correlation 0.93) separately, correlations between these 2 measures were -0.54 and -0.64 for the 2 readers, respectively. Patients with Warner grade 0 had occupation ratios ranging from 0.5 to 1.5. Conclusion: Correlations of preoperative MRI tear dimensions and muscle atrophy assessed by conventional approaches with intraoperatively measured tear dimensions and quantitative occupation ratio, respectively, were only fair. Since tear size and muscle atrophy are known strong predictors of outcomes following rotator cuff repair that may influence treatment decisions, surgeons need to be aware of the limitations of MRI methods. Continued development and validation of quantitative preoperative imaging methods to accurately assess these parameters are needed to improve surgical planning and prognosis.
RESUMO
BACKGROUND: Deep tissue culture specimens obtained at the time of revision shoulder arthroplasty are commonly positive for Cutibacterium. Clinical interpretation of positive cultures can be difficult. This was a multi-institutional study evaluating the accuracy of cultures for Cutibacterium using positive control (PC) and negative control (NC) samples. The relationship between time to culture positivity and strength of culture positivity was also studied. METHODS: Eleven different institutions were each sent 12 blinded samples (10 PC and 2 NC samples). The 10 PC samples included 2 sets of 5 different dilutions of a Cutibacterium isolate from a failed total shoulder arthroplasty with a probable periprosthetic infection. At each institution, the samples were handled as if they were received from the operating room. Specimen growth, time to culture positivity, and strength of culture positivity (based on semiquantitative assessment) were reported. RESULTS: A total of 110 PC samples and 22 NC samples were tested. One hundred percent of specimens at the 4 highest dilutions were positive for Cutibacterium. At the lowest dilution, 91% of samples showed positive findings. Cutibacterium grew in 14% of NC samples. Cutibacterium grew in PC samples at an average of 4.0 ± 1.3 days, and all of these samples showed growth within 7 days. The time to positivity was significantly shorter (P < .001) and the strength of positivity was significantly higher (P < .001) in true-positive cultures compared with false-positive cultures. CONCLUSIONS: This multi-institutional study suggests that different institutions may report highly consistent rates of culture positivity for revision shoulder arthroplasty samples with higher bacterial loads. In contrast, with lower bacterial loads, the results are somewhat less consistent. Clinicians should consider using a shorter time to positivity and a higher strength of positivity as adjuncts in determining whether a tissue culture sample is a true positive.
Assuntos
Artroplastia do Ombro , Propionibacteriaceae , Infecções Relacionadas à Prótese , Articulação do Ombro , Humanos , Propionibacterium acnes , Infecções Relacionadas à Prótese/microbiologia , Ombro/cirurgia , Articulação do Ombro/microbiologia , Articulação do Ombro/cirurgiaRESUMO
BACKGROUND: Severe glenoid bone loss (SGBL) poses significant technical challenges. Adequate fixation of glenoid implants may require the use of alternative screw placement. Although bone volumes for the spine and lateral pillars have previously been defined, insufficient evidence exists regarding the distribution of screw placement for fixation in such regions for cases with SGBL. The purpose of this study is to evaluate the variability of screw placement. We hypothesize that determining this variability and establishing common patterns of glenoid bone loss will allow for recommendations for preoperative planning, and implant design and selection. METHODS: An internal registry of 2 high-volume shoulder and elbow surgeons was queried, and 65 three-dimensional scapulae models exhibiting SGBL were identified. A fellowship-trained shoulder and elbow surgeon simulated the placement of two 3.5 mm × 30 mm screws, one in the scapular spine (CS) bone volume and one in the inferior column (IS) bone volume. Three orthogonal reference planes were created using anatomic reference points: the scapula trigonum, estimated glenoid center, and inferior pole. Screw positions were mapped, and deviations from the reference planes were calculated. Mutual positions of the IS to CS were also computed. Intraobserver reliability was assessed using 10 randomly selected samples. Median and 25th and 75th percentiles were reported for screw orientation distributions. Means and standard deviations were reported for screw head positions. RESULTS: We demonstrated excellent intraobserver reliability (intraclass correlation coefficients, 0.90-0.98). Fifty percent of CS were oriented 10° ± 5° of retroversion from the scapula plane, with 5° ± 5° of inclination. For IS, 50% were positioned 0° ± 4° from the scapula plane, with -33° ± 7° of inclination. The relationship of the IS with the CS was medial and posterior in 49% of cases, lateral and posterior in 45%, and lateral and anterior in 6% of cases. On average, the distance between the CS and IS heads was 25 mm ± 4 mm. DISCUSSION: For SGBL, adequate fixation of glenoid implants can be achieved by placing screws in the spine and lateral columns, with excellent reproducibility. Future implant designs should accommodate CS positioned -16° to -5° from the scapula plane, with 0° to 12° of inclination, and IS positioned -6° to 4° from the scapula plane, with -40° to -25° of inclination. Moreover, mutual screw positions suggested bone loss distributions anteriorly and inferiorly. Future implant designs should consider the potential benefits of augmentation to accommodate interscrew distances of 21-29 mm and anatomic locations of the IS relative to the CS.
Assuntos
Artroplastia do Ombro , Articulação do Ombro , Parafusos Ósseos , Humanos , Reprodutibilidade dos Testes , Escápula/cirurgia , Articulação do Ombro/cirurgiaRESUMO
Glenoid component loosening remains a common complication following anatomic total shoulder arthroplasty (TSA); however, plain radiographs are unable to accurately detect early implant migration. The purpose of this study was to validate the accuracy of a method of postoperative, three-dimensional (3D) computed tomography (CT) imaging with metal artifact reduction (MAR) to detect glenoid component migration following anatomic TSA. Tantalum bead markers were inserted into polyethylene glenoid components for implant detection on 3D CT. In-vitro validation was performed using a glenoid component placed into a scapula sawbone and incrementally translated and rotated, with MAR 3D CT acquired at each test position. Accuracy was evaluated by root mean square error (RMSE). In-vivo validation was performed on six patients who underwent anatomic TSA, with two postoperative CT scans acquired in each patient and marker-based radiostereometric analysis (RSA) performed on the same days. Glenoid component migration was calculated relative to a scapular coordinate system for both MAR 3D CT and RSA. Accuracy was evaluated by RMSE and paired Student's t-tests. The largest RMSE on in-vitro testing was 0.24 mm in translation and 0.11° in rotation, and on in-vivo testing was 0.47 mm in translation and 1.04° in rotation. There were no significant differences between MAR 3D CT and RSA measurement methods. MAR 3D CT imaging is capable of quantifying glenoid component migration with a high level of accuracy. MAR 3D CT imaging is advantageous over RSA because it is readily available clinically and can also be used to evaluate the implant-bone interface.
Assuntos
Artroplastia do Ombro , Cavidade Glenoide , Articulação do Ombro , Prótese de Ombro , Artroplastia do Ombro/efeitos adversos , Artroplastia do Ombro/métodos , Cavidade Glenoide/cirurgia , Humanos , Imageamento Tridimensional , Escápula/diagnóstico por imagem , Escápula/cirurgia , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgia , Prótese de Ombro/efeitos adversos , Tomografia Computadorizada por Raios X/métodosRESUMO
BACKGROUND: Most orthopaedic journals currently require reporting outcomes of surgical interventions for at least 2 postoperative years, but there have been no rigorous studies on this matter. Various patient-reported outcome (PRO) measures (PROMs) have been used to assess the status of the shoulder after rotator cuff repair (RCR). HYPOTHESIS: We hypothesized that the mean shoulder-specific PROMs at 1 year improve substantially over baseline but that there is no clinically meaningful difference between the mean 1- and 2-year PROMs after RCR. STUDY DESIGN: Meta-analysis; Level of evidence, 2. METHODS: We conducted a systematic review of published randomized controlled trials (RCTs) and prospective cohort studies (level of evidence 1 and 2) reporting the shoulder-specific American Shoulder and Elbow Surgeons (ASES), the Constant, or the Western Ontario Rotator Cuff (WORC) Index scores at baseline, 1 year, and 2 years after RCR. The methodologic quality of studies was assessed. Also, the random effects meta-analyses of changes in PROMs for each of the first and second postoperative years were conducted. RESULTS: Fifteen studies (n = 11 RCTs; n = 4 cohort studies) with a total of 1371 patients were included. Studies were highly heterogeneous, but no visual evidence of major publication bias was observed. The weighted means of the baseline PROMs were 46.2 points for the ASES score, 46.4 points for the Constant score, and 38.8 points for the WORC Index. The first-year summary increments were 41.1 (95% CI, 36.0-46.2) points for the ASES score, 34.2 (95% CI, 28.8-39.6) points for the Constant score, and 42.9 (95% CI, 37.3-48.4) points for the WORC Index. In contrast, the second-year summary increments were 2.3 (95% CI, 1-3.6) points for the ASES score, 3.2 (95% CI, 1.9-4.4) points for the Constant score, and 2 (95% CI, -0.1 to 4) points for the WORC Index. CONCLUSION: All PROMs improved considerably from baseline to 1 year, but only very small gains that were below the minimal clinically important differences were observed between 1 year and 2 years after RCR. This study did not find any evidence for requiring a minimum of 2 years of follow-up for publication of PROs after RCR. Our results suggest that focusing on 1-year PROMs after RCR would foster more timely reporting, better control of selection bias, and better allocation of research resources.
Assuntos
Lesões do Manguito Rotador , Manguito Rotador , Artroplastia , Artroscopia/métodos , Humanos , Medidas de Resultados Relatados pelo Paciente , Manguito Rotador/cirurgia , Lesões do Manguito Rotador/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: The purpose of this study was to demonstrate the validity and efficiency of the Outcomes Management and Evaluation (OME) system, a prospectively designed electronic data collection tool, for collecting comprehensive and standardized surgical data in shoulder arthroplasty. METHODS: Surgical data from the first 100 cases of shoulder arthroplasty that were collected into the OME database were analyzed. Surgeons completed a traditional narrative operative note and also an OME case report using an encrypted smartphone. A blinded reviewer extracted data from the operative notes and implant logs in the electronic medical records (EMR) by manual chart review. OME and EMR data were compared with regard to data counts and agreement between 39 variables related to preoperative pathology, including rotator cuff status and glenoid wear, and surgical procedures. Data counts were assessed using both raw percentages and with McNemar's test (with continuity correction). Agreement of nominal variables was analyzed using Cohen's unweighted kappa (κ) and of ordinal variables using the linearly weighted Cohen's test. Efficiency was assessed by calculating the median time needed to complete OME. RESULTS: Compared to the EMR, the OME database had significantly higher data counts for 56% (22 of 39) of the variables assessed. A high level of proportional and statistical agreement was demonstrated between the data in the two datasets. 10 of 39 variables had 100% agreement but could not be statistically compared because both datasets had the same single response under those variables. Among the 29 variables that were compared, 79% (23 of 29) of variables had >80% raw proportional agreement, and 69% (20 of 29) of variables showed at least substantial agreement (κ > 0.6). The median time for completing OME surgery data entry was 92 seconds (IQR 70 - 126). CONCLUSION: The prospectively designed, electronic data entry system (OME) is an efficient and valid tool for collecting comprehensive and standardized surgical data on shoulder arthroplasty. LEVEL OF EVIDENCE: Level IV.
RESUMO
BACKGROUND: Posterior glenoid bone loss is commonly associated with primary glenohumeral osteoarthritis. Surgical management of bone loss in anatomic total shoulder arthroplasty (aTSA) remains controversial. We studied the use of a stepped augmented glenoid component for management of Walch B2 and B3 glenoids and compared the radiographic and clinical outcomes at short-term follow-up with those achieved with a non-augmented component of the same design in Walch A1 glenoids. METHODS: Ninety-two patients (42 A1, 29 B2, and 21 B3 glenoids) were prospectively followed after aTSA. Sequential 3-dimensional (3D) computed tomography (CT) imaging was performed preoperatively, within 3 months postoperatively with metal artifact reduction (MAR) to define implant position, and at a minimum of 2 years postoperatively with MAR. Scapular 3D registration with implant registration allowed 3D measurement of glenoid implant position, implant shift, and central peg osteolysis (CPO). RESULTS: CPO with or without implant shift occurred in a higher percentage of B3 glenoids treated with the augmented glenoid component (29%) than A1 glenoids treated with a standard component (5%) (p = 0.028). There was no significant difference in the frequency of CPO between B2 glenoids with the augmented component (10%) and A1 glenoids with the standard component. There was no difference in postoperative glenoid component version and inclination between groups. B3 glenoids were associated with more component medialization relative to the premorbid joint line compared with A1 and B2 glenoids (p < 0.001). CONCLUSIONS: A stepped augmented glenoid component can restore premorbid glenoid anatomy in patients with asymmetric biconcave glenoid bone loss (Walch B2), with short-term clinical and radiographic results equivalent to those for patients without glenoid bone loss (Walch A1) treated with a non-augmented component. There is a greater risk of CPO in patients with moderate-to-severe B3 glenoid pathology with this stepped augmented glenoid component. Longer follow-up will help define the clinical implications of CPO over time. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Artroplastia do Ombro/métodos , Osteoartrite/cirurgia , Escápula/cirurgia , Articulação do Ombro/cirurgia , Idoso , Cimentos Ósseos , Cimentação , Feminino , Humanos , Imageamento Tridimensional , Masculino , Pessoa de Meia-Idade , Osteoartrite/diagnóstico por imagem , Osteólise/diagnóstico por imagem , Osteólise/cirurgia , Desenho de Prótese , Estudos Retrospectivos , Escápula/diagnóstico por imagem , Articulação do Ombro/diagnóstico por imagem , Prótese de Ombro , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Magnetic resonance imaging (MRI) is standard of care for rotator cuff evaluation, with clinical interpretation usually limited to qualitative judgments. The reliability of MRI-based measurements and scoring systems has been evaluated only preoperatively or ≥6 months following rotator cuff repair, when repairs are in the later stages of healing. This study describes the MRI assessments and inter-rater agreement of various rotator cuff tendon and muscle parameters evaluated preoperatively and 4 times during the first postoperative year. METHODS: Two musculoskeletal radiologists independently assessed MRI scans of 42 patients preoperatively and 3, 12, 26, and 52 weeks after rotator cuff repair. Using standardized reading rules, readers assessed tendon integrity (5-point Sugaya classification), tear dimensions, muscle fat (5-point Goutallier classification) and atrophy (4-point Warner classification), muscle cross-sectional areas, and myotendinous junction distance. Raw exact agreement proportions, κ statistics, and correlation coefficients were used to quantify inter-rater agreement. RESULTS: Readers showed moderate to substantial above-chance agreement in scoring rotator cuff tendon integrity and supraspinatus muscle atrophy and good to excellent agreement on tear dimensions and muscle cross-sectional areas but only fair to moderate agreement for fatty infiltration and myotendinous junction distance. Only fatty infiltration grades evidenced observer bias. Inter-rater agreement did not appear time dependent. CONCLUSION: By use of defined reading rules in a research setting, MRI evaluations of rotator cuff tendon integrity, tear dimensions, muscle atrophy, and cross-sectional areas have reasonable reliability at all time points in the first postoperative year. However, the presence of clinically significant disagreements, even in such favorable circumstances, indicates the need for improved imaging tools for precise rotator cuff evaluation.
Assuntos
Lesões do Manguito Rotador , Manguito Rotador , Humanos , Imageamento por Ressonância Magnética , Variações Dependentes do Observador , Reprodutibilidade dos Testes , Manguito Rotador/diagnóstico por imagem , Manguito Rotador/cirurgia , Lesões do Manguito Rotador/diagnóstico por imagem , Lesões do Manguito Rotador/cirurgiaRESUMO
BACKGROUND: The purpose of this study was to evaluate glenoid component position and radiolucency following anatomic total shoulder arthroplasty (TSA) using sequential 3-dimensional computed tomography (3D CT) analysis. METHODS: In a series of 152 patients (42 Walch A1, 16 A2, 7 B1, 49 B2, 29 B3, 3 C1, 3 C2, and 3 D glenoids) undergoing anatomic TSA with a polyethylene glenoid component, sequential 3D CT analysis was performed preoperatively (CT1), early postoperatively (CT2), and at a minimum 2-year follow-up (CT3). Glenoid component shift was defined as a change in component version or inclination of ≥3° from CT2 to CT3. Glenoid component central anchor peg osteolysis (CPO) was assessed at CT3. Factors associated with glenoid component shift and CPO were evaluated. RESULTS: Glenoid component shift occurred from CT2 to CT3 in 78 (51%) of the 152 patients. CPO was seen at CT3 in 19 (13%) of the 152 patients, including 15 (19%) of the 78 with component shift. Walch B2 glenoids with a standard component and glenoids with higher preoperative retroversion were associated with a higher rate of shift, but not of CPO. B3 glenoids with an augmented component and glenoids with greater preoperative joint-line medialization were associated with CPO, but not with shift. More glenoid component joint-line medialization from CT2 to CT3 was associated with higher rates of shift and CPO. A greater absolute change in glenoid component inclination from CT2 to CT3 and a combined absolute glenoid component version and inclination change from CT2 to CT3 were associated with CPO. Neither glenoid component shift nor CPO was associated with worse clinical outcomes. CONCLUSIONS: Postoperative 3D CT analysis demonstrated that glenoid component shift commonly occurs following anatomic TSA, with increased inclination the most common direction. Most (81%) of the patients with glenoid component shift did not develop CPO. Longer follow-up is needed to determine the relationships of glenoid component shift and CPO with loosening over time. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.
Assuntos
Artroplastia do Ombro/efeitos adversos , Cavidade Glenoide/diagnóstico por imagem , Osteoartrite/cirurgia , Osteólise/epidemiologia , Complicações Pós-Operatórias/epidemiologia , Idoso , Artroplastia do Ombro/instrumentação , Feminino , Seguimentos , Cavidade Glenoide/patologia , Humanos , Imageamento Tridimensional/estatística & dados numéricos , Masculino , Pessoa de Meia-Idade , Osteólise/diagnóstico , Osteólise/etiologia , Complicações Pós-Operatórias/diagnóstico , Complicações Pós-Operatórias/etiologia , Estudos Retrospectivos , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/patologia , Articulação do Ombro/cirurgia , Prótese de Ombro/efeitos adversos , Âncoras de Sutura/efeitos adversos , Tomografia Computadorizada por Raios X/estatística & dados numéricosRESUMO
OBJECTIVE: To determine whether a simulated low-dose metal artifact reduction (MAR) CT technique is comparable with a clinical dose MAR technique for shoulder arthroplasty evaluation. MATERIALS AND METHODS: Two shoulder arthroplasties in cadavers and 25 shoulder arthroplasties in patients were scanned using a clinical dose (140 kVp, 300 qrmAs); cadavers were also scanned at half dose (140 kVp, 150 qrmAs). Images were reconstructed using a MAR CT algorithm at full dose and a noise-insertion algorithm simulating 50% dose reduction. For the actual and simulated half-dose cadaver scans, differences in SD for regions of interest were assessed, and streak artifact near the arthroplasty was graded by 3 blinded readers. Simulated half-dose scans were compared with full-dose scans in patients by measuring differences in implant position and by comparing readers' grades of periprosthetic osteolysis and muscle atrophy. RESULTS: The mean difference in SD between actual and simulated half-dose methods was 2.42 HU (95% CI [1.4, 3.4]). No differences in streak artifact grades were seen in 13/18 (72.2%) comparisons in cadavers. In patients, differences in implant position measurements were within 1° or 1 mm in 149/150 (99.3%) measurements. The inter-reader agreement rates were nearly identical when readers were using full-dose (77.3% [232/300] for osteolysis and 76.9% [173/225] for muscle atrophy) and simulated half-dose (76.7% [920/1200] for osteolysis and 74.0% [666/900] for muscle atrophy) scans. CONCLUSION: A simulated half-dose MAR CT technique is comparable both quantitatively and qualitatively with a standard-dose technique for shoulder arthroplasty evaluation, demonstrating that this technique could be used to reduce dose in arthroplasty imaging.
Assuntos
Artefatos , Tomografia Computadorizada por Raios X , Algoritmos , Artroplastia , Cadáver , Humanos , Metais , Imagens de FantasmasRESUMO
HYPOTHESIS AND BACKGROUND: Shoulder pain and dysfunction are common indications for shoulder arthroplasty, yet the factors that are associated with these symptoms are not fully understood. This study aimed to investigate the associations of patient and disease-specific factors with preoperative patient-reported outcome measures (PROMs) in patients undergoing primary shoulder arthroplasty. We hypothesized that worse mental health status assessed by the Veterans RAND 12-Item Health Survey (VR-12) mental component score (MCS), glenoid bone loss, and increasing rotator cuff tear severity would be associated with lower values for the preoperative total Penn Shoulder Score (PSS) and its pain, function, and satisfaction subscores. METHODS: We prospectively identified 12 patient factors and 4 disease-specific factors as possible statistical predictors of preoperative PROMs in patients undergoing primary shoulder arthroplasty at a single institution over a 3-year period. Multivariable statistical modeling and Akaike information criterion comparisons were used to investigate the unique associations with, and relative importance of, these factors in accounting for variation in the preoperative PSS and its subscores. RESULTS: A total of 788 cases performed by 12 surgeons met the inclusion criteria, with a preoperative median total PSS of 31 points (pain, 10 points; function, 18 points; and satisfaction, 1 point). As hypothesized, a lower VR-12 MCS was associated with lower preoperative PSS pain, function, and total scores, but patients with intact status or small to medium rotator cuff tears had modestly lower PSS pain subscores (ie, more pain) than patients with large to massive superior-posterior rotator cuff tears. Glenoid bone loss was not associated with the preoperative PSS. Female sex and fewer years of education (for all 4 outcomes), lower VR-12 MCS and preoperative opioid use (for all outcomes but satisfaction), and rotator cuff tear severity (for pain only) were the factors most prominently associated with preoperative PROMs. CONCLUSION: In addition to mental health status and rotator cuff tear status, patient sex, years of education, and preoperative opioid use were most prominently associated with preoperative PROMs in patients undergoing shoulder arthroplasty. Further studies are needed to investigate whether these factors will also predict postoperative PROMs.
Assuntos
Artroplastia do Ombro , Lesões do Manguito Rotador , Articulação do Ombro , Feminino , Nível de Saúde , Humanos , Satisfação do Paciente , Satisfação Pessoal , Lesões do Manguito Rotador/cirurgia , Articulação do Ombro/cirurgia , Dor de Ombro , Resultado do TratamentoRESUMO
BACKGROUND: Glenoid component loosening is a common cause of failure after anatomic total shoulder arthroplasty. Prior studies of all-polyethylene glenoid implants with hybrid fixation did not show early glenoid radiolucency to be clinically significant. The purpose of this study was to determine the clinical significance of progression of radiolucency around the central peg of the glenoid component. METHODS: We identified 73 shoulders that underwent primary anatomic total shoulder arthroplasty between January 1995 and May 2015 for osteoarthritis with an all-polyethylene pegged glenoid, with a minimum follow-up interval of 2 years between early and late follow-up. Demographic, radiographic (central-peg osteolysis [CPO] and central-peg grading [CPG]), and outcome variables comprising the Penn Shoulder Score (PSS) and revision surgery were collected. Clinical failure was defined as a PSS decrease >11.4 points (ie, PSS failure) or revision surgery. RESULTS: The average patient age at surgery was 65 ± 7 years, and 63% of patients were men. The median initial follow-up period was 14 months (interquartile range, 12-25 months), and the final median follow-up period was 56 months (interquartile range, 47-69 months). Revision surgical procedures were performed in 4 patients, and 17 PSS failures occurred. We found that CPO at final follow-up, CPG progression, and worse PSS at follow-up were associated with revision surgery (P < .05). We also found younger age at surgery, CPO at final follow-up, CPG progression, and greater glenoid component retroversion at final follow-up to be associated with clinical failure (PSS failure or revision surgery) (P < .05). Multivariate analysis found only CPG progression to be associated with clinical failure (P < .001). DISCUSSION AND CONCLUSION: CPO and CPG progression were associated with clinical failure, defined as decreasing clinical outcome scores or revision surgery.
Assuntos
Artroplastia do Ombro , Articulação do Ombro , Prótese de Ombro , Seguimentos , Humanos , Masculino , Polietileno , Desenho de Prótese , Falha de Prótese , Reoperação , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgia , Resultado do TratamentoRESUMO
BACKGROUND: The purpose of this study was to quantify correction of glenoid deformity and humeral head alignment in anatomic total shoulder arthroplasty as a function of preoperative pathology (modified Walch classification) and glenoid implant type in a clinical cohort using 3-dimensional computed tomography (CT) analysis. METHODS: Patients undergoing anatomic total shoulder arthroplasty with a standard glenoid (SG) (n = 110) or posteriorly stepped augmented glenoid (AG) (n = 62) component were evaluated with a preoperative CT scan and a postoperative CT scan within 3 months of surgery. Glenoid version, inclination, and medial-lateral (ML) joint line position, as well as humeral head alignment, were assessed on both CT scans, with preoperative-to-postoperative changes analyzed relative to pathology and premorbid anatomy based on the modified Walch classification and glenoid implant type. RESULTS: On average, correction to the premorbid ML joint line position was significantly less in type A2 glenoids than in type A1 glenoids (-2.3 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Correction to premorbid version was not different between type B2 glenoids with AG components and type A1 glenoids with SG components (-1.7° ± 6.6° vs. -1.0° ± 4.0°, P = .57), and the premorbid ML joint line position was restored on average in both groups (0.3 ± 1.6 mm vs. 1.1 ± 0.9 mm, P = .006). Correction to premorbid version was not different between type B3 glenoids with AG components and type A1 glenoids with SG components (-0.6° ± 5.1° vs. -1.0° ± 4.0°, P = .72), but correction relative to the premorbid ML joint line position was significantly less in type B3 glenoids with AG components than in type A1 glenoids with SG components (-2.2 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Postoperative humeral glenoid alignment was not different in any group comparisons. DISCUSSION: In cases with posterior glenoid bone loss and retroversion (type B2 or B3 glenoids), an AG component can better correct retroversion and the glenoid ML joint line position compared with an SG component, with correction to premorbid version comparable to a type A1 glenoid with an SG component. However, restoration of the premorbid ML joint line position may not always be possible with SG or AG components in cases with more advanced central glenoid bone loss (type A2 or B3 glenoids). Further follow-up is needed to determine the clinical consequences of these findings.
Assuntos
Artroplastia do Ombro , Osteoartrite , Articulação do Ombro , Cavidade Glenoide/diagnóstico por imagem , Cavidade Glenoide/cirurgia , Humanos , Osteoartrite/cirurgia , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgia , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Variations in glenoid morphology affect surgical treatment and outcome of advanced glenohumeral osteoarthritis (OA). The purpose of this study was to assess the inter- and intraobserver reliability of the modified Walch classification using 3-dimensional (3D) computed tomography (CT) imaging in a multicenter research group. METHODS: Deidentified preoperative CTs of patients with primary glenohumeral OA undergoing anatomic or reverse total shoulder arthroplasty (TSA) were reviewed with 3D imaging software by 23 experienced shoulder surgeons across 19 institutions. CTs were separated into 2 groups for review: group 1 (96 cases involving all modified Walch classification categories evaluated by 12 readers) and group 2 (98 cases involving posterior glenoid deformity categories [B2, B3, C1, C2] evaluated by 11 readers other than the first 12). Each case group was reviewed by the same set of readers 4 different times (with and without the glenoid vault model present), blindly and in random order. Inter- and intraobserver reliabilities were calculated to assess agreement (slight, fair, moderate, substantial, almost perfect) within groups and by modified Walch classification categories. RESULTS: Interobserver reliability showed fair to moderate agreement for both groups. Group 1 had a kappa of 0.43 (95% confidence interval [CI]: 0.38, 0.48) with the glenoid vault model absent and 0.41 (95% CI: 0.37, 0.46) with it present. Group 2 had a kappa of 0.38 (95% CI: 0.33, 0.43) with the glenoid vault model absent and 0.37 (95% CI: 0.32, 0.43) with it present. Intraobserver reliability showed substantial agreement for group 1 with (0.63, range 0.47-0.71) and without (0.61, range 0.52-0.69) the glenoid vault model present. For group 2, intraobserver reliability showed moderate agreement with the glenoid vault model absent (0.51, range 0.30-0.72), which improved to substantial agreement with the glenoid vault model present (0.61, range 0.34-0.87). DISCUSSION: Inter- and intraobserver reliability of the modified Walch classification were fair to moderate and moderate to substantial, respectively, using standardized 3D CT imaging analysis in a large multicenter study. The findings potentially suggest that cases with a spectrum of posterior glenoid bone loss and/or dysplasia can be harder to distinguish by modified Walch type because of a lack of defined thresholds, and the glenoid vault model may be beneficial in determining Walch type in certain scenarios. The ability to reproducibly separate patients into groups based on preoperative pathology, including Walch type, is important for future studies to accurately evaluate postoperative outcomes in TSA patient cohorts.
Assuntos
Cavidade Glenoide , Osteoartrite , Articulação do Ombro , Cavidade Glenoide/diagnóstico por imagem , Humanos , Osteoartrite/diagnóstico por imagem , Reprodutibilidade dos Testes , Escápula/diagnóstico por imagem , Articulação do Ombro/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: To address the need for more objective and quantitative measures of tendon healing in research studies, we intend to use computed tomography (CT) with implanted radiopaque markers on the repaired tendon to measure tendon retraction following rotator cuff repair. In our small prior study, retraction at 1-year follow-up averaged 16.1± 5.3 mm and exceeded 10.0 mm in 12 of 13 patients, and thus tendon retraction appears to be a common clinical phenomenon. This study's objectives were to assess, using 5 longitudinal CT scans obtained over 1 year following rotator cuff repair, the variability in glenohumeral positioning because of pragmatic variations in achieving perfect arm repositioning and to estimate the associated measurement variability in bone-to-tendon marker length measurements. METHODS: Forty-eight patients underwent rotator cuff repair with intraoperative placement of radiopaque tendon markers at the repair site. All patients had a CT scan with their arms at the side on the day of surgery and at 3, 12, 26, and 52 weeks postoperatively. Glenohumeral position (defined by the orientation and distance of the humerus with respect to the scapula) and bone-to-tendon marker lengths were measured from each scan. Within-patient variation in glenohumeral position measurements was described by their pooled within-patient standard deviations (SDs), and variation in bone-to-tendon marker lengths by their standard errors of measurement (SEMs) and 95% confidence level minimally detectable distances (MDD95) and changes (MDC95). RESULTS: The mean glenohumeral orientation from the 5 longitudinal CT scans averaged across the 48 patients was 12.6° abduction, 0.4° flexion, and -0.1° internal rotation. Within-patient SDs (95% confidence intervals) of glenohumeral orientation were 3.0° (2.7°-3.4°) in extension/flexion, 5.2° (4.6°-5.8°) in abduction/adduction, and 8.2° (7.3°-9.2°) in internal/external rotation. The SDs of glenohumeral distances were less than 1 mm in any direction. The estimated SEMs of bone-to-tendon lengths were consistent with a common value of 2.4 mm for any of the tendon markers placed across the repair, with MDD95 of 4.7 mm and MDC95 of 6.7 mm. CONCLUSION: Apparent tendon retraction of 5 mm or more, when measured as the distance from a tendon marker's day of surgery location to its new location on a volumetrically registered longitudinal CT scan, may be considered above the usual range of measurement variation. Tendon retraction measured using implanted radiopaque tendon markers offers an objective and sufficiently reliable means for quantifying the commonly expected changes in structural healing following rotator cuff repair.
RESUMO
BACKGROUND: Shoulder pain and dysfunction are common indications for rotator cuff repair surgery, yet the factors that are associated with these symptoms are not fully understood. PURPOSE/HYPOTHESIS: This study aimed to investigate the associations of patient and disease-specific factors with baseline patient-reported outcome measures (PROMs) in patients undergoing rotator cuff repair. We hypothesized that tear size and mental health status, as assessed by the Veterans RAND 12-Item Health Survey mental component score (VR-12 MCS), would be associated with baseline total Penn Shoulder Score (PSS) and its pain, function, and satisfaction subscale scores. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: We prospectively identified 12 patient factors and 12 disease-specific factors as possible statistical predictors for baseline PROMs in patients undergoing surgical repair of superior-posterior rotator cuff tears at a single institution over a 3-year period. Multivariable statistical modeling and Akaike information criterion comparisons were used to investigate the unique associations with, and relative importance of, these factors in accounting for variation in baseline PSS and its subscale scores. RESULTS: A total of 1442 patients who had undergone surgery by 23 surgeons met inclusion criteria, with a baseline median total PSS of 38.5 (pain, 12; function, 24.2; satisfaction, 2). Adjusted R2 in multivariable models demonstrated that the 24 general patient and disease-specific factors accounted for 22% to 24% of the variability in total PSS and its pain and function subscale scores. Large/massive tear size was significantly associated with worse PSS total score and function score but not pain or satisfaction scores. Lower VR-12 MCS was significantly associated with worse total PSS and all 3 subscale scores. Among other factors significantly associated with baseline PROMs were sex, race, preoperative opioid use, years of education, employment status, acromion status, and adhesive capsulitis. Lower VR-12 MCS, preoperative opioid use, female sex, and black race were the factors most strongly associated with baseline PROMs. CONCLUSION: Large/massive tear size, lower VR-12 MCS, and several additional patient and disease-specific factors are associated with baseline PROMs in patients undergoing rotator cuff repair. Further studies are needed to investigate whether these factors will also predict poor postoperative PROMs.