RESUMO
Pazopanib, which is dangerous for aquatic environments due to its toxic and bioaccumulation potential, has been detected at different concentrations in oncology hospital wastewater, sewage, and surface waters. This study aimed to remove pazopanib from wastewater by activated carbon adsorption technique. The effect of the main variables such as initial concentration, pH of pazopanib solution, adsorbent dose, contact time of the phases, and temperature on the adsorption process was evaluated and the optimum adsorption conditions were determined. The experimental data were applied to Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich adsorption isotherm models to describe the adsorption behavior. The experimental data were applied to pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetic models to describe the adsorption kinetics. Isotherms were established in the 20-50 °C temperature range to study the adsorption equilibrium. According to the results, the highest removal efficiency of pazopanib (95.87%) was obtained at initial concentration (100 mg L-1), adsorbent dose (0.30 g L-1), temperature (20 °C), contact time (120 min) and pH (7.0). The adsorption kinetics was well described by the pseudo-second-order kinetic model (R2 = 0.9998) and the adsorption isotherm by the Langmuir model (R2 = 0.9999). In thermodynamic studies, the negative values of standard enthalpy (ΔH°), standard free enthalpy (ΔG°), and free entropy (ΔS°) indicate that the adsorption process is spontaneous and favorable, i.e. the disorder is reduced. These results indicate that the developed adsorption process can be efficiently and spontaneously applied for the removal of pazopanib from aqueous solutions.