RESUMO
To further our understanding of a thermoplastic arabinoxylan (AX) material obtained through an oxidation-reduction-etherification pathway, the role of the initial arabinose:xylose ratio on the material properties was investigated. Compression molded films with one molar substitution of butyl glycidyl ether (BGE) showed markedly different tensile behaviors. Films made from low arabinose AX were less ductile, while those made from high arabinose AX exhibited elastomer-like behaviors. X-ray scattering confirmed the presence of nanostructure formation resulting in nano-domains rich in either AX or BGE, from side chain grafting. The scattering data showed variations in the presence of ordered structures, nano-domain sizes and their temperature response between AX with different arabinose contents. In dynamic mechanical testing, three transitions were observed at approximately -90 °C, -50 °C and 80 °C, with a correlation between samples with more structured nano-domains and those with higher onset transition temperatures and lower storage modulus decrease. The mechanical properties of the final thermoplastic AX material can therefore be tuned by controlling the composition of the starting material.
RESUMO
The bark is the outermost defense of trees against microbial attack, largely thanks to toxicity and prevalence of extractive compounds. Nevertheless, bark decomposes in nature, though by which species and mechanisms remains unknown. Here, we have followed the development of microbial enrichments growing on spruce bark over six months, by monitoring both chemical changes in the material and performing community and metagenomic analyses. Carbohydrate metabolism was unexpectedly limited, and instead a key activity was metabolism of extractives. Resin acid degradation was principally linked to community diversification with specific bacteria revealed to dominate the process. Metagenome-guided isolation facilitated the recovery of the dominant enrichment strain in pure culture, which represents a new species (Pseudomonas abieticivorans sp. nov.), that can grow on resin acids as a sole carbon source. Our results illuminate key stages in degradation of an abundant renewable resource, and how defensive extractive compounds have major roles in shaping microbiomes.
Assuntos
Microbiota , Picea , Casca de Planta , Metagenoma , Bactérias/genéticaRESUMO
The dynamical properties of four protic ionic liquids, based on the ethyltriazolium ([C2HTr124]) and the ethylimidazolium ([C2HIm]) cation, were investigated. The associated anions were the triflate ([TfO]) and the bistriflimide ([TFSI]). Ionic conductivity values and self-diffusion coefficients were measured and discussed, extending the discussion to the concept of fragility. Furthermore, in order to allow the measurement of the ionic conductivity of very small volumes (<0.5 mL) of ionic liquid under an inert and dry atmosphere, a new setup was developed. It was found that the cation nature strongly affected the transport properties, the [C2HTr124] cation resulting in slower dynamics than the [C2HIm] one. This was concluded from both conductivity and diffusivity measurements while for both properties, the anion had a lesser effect. By fitting the conductivity data with the Vogel-Fulcher-Tammann (VFT) equation, we could also estimate the fragility of these ionic liquids, which all fell in the range of very fragile glass-forming materials. Finally, the slower dynamics observed in the triazolium-based ionic liquids can be rationalized by the stronger interactions that this cation establishes with both anions, as deduced from the frequency analysis of relevant Raman signatures and density functional theory (DFT) calculations.
Assuntos
Líquidos Iônicos , Ânions , Cátions , Condutividade Elétrica , VidroRESUMO
The intake of dietary fibers is related with important benefits for human health. We produced two different arabinoxylan fibers with (FAX) and without ferulic acid linked (AX), 12.5 and 0.1 mg g-1 of ferulic acid respectively, by subcritical water extraction of wheat bran. Both FAX and AX fibers were used as supplement in bread production, while non-supplemented bread was used as control. Through an enzymatic deconstruction process we investigated the effect of bread making on the fibers, the preservation of their molecular structure (A/X ratio of 0.13 and Mw of 105 Da) and the interaction with other macromolecules in the bread. By mimicking the upper track digestion, we could confirm the non-digestability of the fibers and we used them for the fermentation with B. ovatus and B. adolescentis. The presence of AX fibers during fermentation showed specific substrate adaptation by the probiotic bacteria in correlation with its potential prebiotic effect.
Assuntos
Pão , Fibras na Dieta , Humanos , Pão/microbiologia , Fermentação , Xilanos/química , DigestãoRESUMO
Two-dimensional covalent organic frameworks (2D COFs) feature graphene-type 2D layered sheets but with a tunable structure, electroactivity, and high porosity. If these traits are well-combined, then 2D COFs can be applied in electronics to realize functions with a high degree of complexity. Here, a highly crystalline electroactive COF, BDFamide-Tp, was designed and synthesized. It shows regularly distributed pores with a width of 1.35 nm. Smooth and successive films of such a COF were fabricated and found to be able to increase the conductivity of an organic semiconductor by 103 by interfacial doping. Upon encapsulation of a photoswitchable molecule (spiropyran) into the voids of the COF layer, the resulted devices respond differently to light of different wavelengths. Specifically, the current output ratio after UV vs Vis illumination reaches 100 times, thus effectively creating on and off states. The respective positive and negative feedbacks are memorized by the device and can be reprogrammed by UV/Vis illumination. The reversible photostimulus responsivity and reliable memory of the device are derived from the combination of electroactivity and porosity of the 2D COF. This work shows the capability of 2D COFs in higher-level electronic functions and extends their possible applications in information storage.
RESUMO
In nature, chitin is organized in hierarchical structures composed of nanoscale building blocks that show outstanding mechanical and optical properties attractive for nanomaterial design. For applications that benefit from a maximized interface such as nanocomposites and Pickering emulsions, individualized chitin nanocrystals (ChNCs) are of interest. However, when extracted in water suspension, their individualization is affected by ChNC self-assembly, requiring a large amount of water (above 90%) for ChNC transport and stock, which limits their widespread use. To master their individualization upon drying and after regeneration, we herein report a waterborne topochemical one-pot acid hydrolysis/Fischer esterification to extract ChNCs from chitin and simultaneously decorate their surface with lactate or butyrate moieties. Controlled reaction conditions were designed to obtain nanocrystals of a comparable aspect ratio of about 30 and a degree of modification of about 30% of the ChNC surface, under the rationale to assess the only effect of the topochemistry on ChNC supramolecular organization. The rheological analysis coupled with polarized light imaging shows how the nematic structuring is hindered by both surface ester moieties. The increased viscosity and elasticity of the modified ChNC colloids indicate a gel-like phase, where typical ChNC clusters of liquid crystalline phases are disrupted. Pickering emulsions have been prepared from lyophilized nanocrystals as a proof of concept. Our results demonstrate that only the emulsions stabilized by the modified ChNCs have excellent stability over time, highlighting that their individualization can be regenerated from the dry state.
RESUMO
The gut microbiota plays a central role in human health by enzymatically degrading dietary fiber and concomitantly excreting short chain fatty acids that are associated with manifold health benefits. The polysaccharide xylan is abundant in dietary fiber but noncarbohydrate decorations hinder efficient cleavage by glycoside hydrolases (GHs) and need to be addressed by carbohydrate esterases (CEs). Enzymes from carbohydrate esterase families 1 and 6 (CE1 and 6) perform key roles in xylan degradation by removing feruloyl and acetate decorations, yet little is known about these enzyme families especially with regard to their diversity in activity. Bacteroidetes bacteria are dominant members of the microbiota and often encode their carbohydrate-active enzymes in multigene polysaccharide utilization loci (PULs). Here we present the characterization of three CEs found in a PUL encoded by the gut Bacteroidete Dysgonomonas mossii. We demonstrate that the CEs are functionally distinct, with one highly efficient CE6 acetyl esterase and two CE1 enzymes with feruloyl esterase activities. One multidomain CE1 enzyme contains two CE1 domains: an N-terminal domain feruloyl esterase, and a C-terminal domain with minimal activity on model substrates. We present the structure of the C-terminal CE1 domain with the carbohydrate-binding module that bridges the two CE1 domains, as well as a complex of the same protein fragment with methyl ferulate. The investment of D. mossii in producing multiple CEs suggests that improved accessibility of xylan for GHs and cleavage of covalent polysaccharide-polysaccharide and lignin-polysaccharide bonds are important enzyme activities in the gut environment.
Assuntos
Proteínas de Bactérias/metabolismo , Bacteroidetes/enzimologia , Esterases/metabolismo , Microbioma Gastrointestinal , Polissacarídeos/metabolismo , Sequência de Aminoácidos , Bacteroidetes/genética , Bacteroidetes/isolamento & purificação , Metabolismo dos Carboidratos , Humanos , Modelos Moleculares , Alinhamento de Sequência , Especificidade por SubstratoRESUMO
Poly[(3-hydroxybutyrate)-ran-(3-hydroxyvalerate)] (PHBV) is a bacterial polyester with a strong potential as a substitute for oil-based thermoplastics due to its biodegradability and renewability. However, its inherent slow crystallization rate limits its thermomechanical properties and therefore its applications. In this work, surface-modified cellulose nanocrystals (CNCs) have been investigated as green and biosourced nucleating and reinforcing agent for PHBV matrix. Different ester moieties from the CNCs were thereby produced through a green one-pot hydrolysis/Fisher esterification. Beyond the improved dispersion, the CNCs surface esterification affected the thermal and thermomechanical properties of PHBV. The results demonstrate that butyrate-modified CNCs, mimicking the PHBV chemical structure, brought a considerable improvement toward the CNCs/matrix interface, leading to an enhancement of the PHBV thermomechanical properties via a more efficient stress transfer, especially above its glass transition.
Assuntos
Celulose , Nanopartículas , Hidroxibutiratos , Interfase , ValeratosRESUMO
Boron silicate (BS) with a chabazite framework structure was synthesised using a direct route and rigorously characterized before it was ion-exchanged with copper to form Cu-BS. Employing in situ infrared spectroscopy, we show that Cu-BS is capable of oxidising methane to methoxy species and methanol interacts with the boron sites without deprotonation.
RESUMO
From the assignment of the solid-state (13)C NMR signals in the C4 region, distinct types of crystalline cellulose, cellulose at crystalline surfaces, and disordered cellulose can be identified and quantified. For regenerated cellulose, complete (13)C assignments of the other carbon regions have not previously been attainable, due to signal overlap. In this study, two-dimensional (2D) NMR correlation methods were used to resolve and assign (13)C signals for all carbon atoms in regenerated cellulose. (13)C-enriched bacterial nanocellulose was biosynthesized, dissolved, and coagulated as highly crystalline cellulose II. Specifically, four distinct (13)C signals were observed corresponding to conformationally different anhydroglucose units: two signals assigned to crystalline moieties and two signals assigned to non-crystalline species. The C1, C4 and C6 regions for cellulose II were fully examined by global spectral deconvolution, which yielded qualitative trends of the relative populations of the different cellulose moieties, as a function of wetting and drying treatments.
RESUMO
In this study the effect of residual coagulation medium (water) on cellulose dissolution in an ionic liquid is discussed. Solubility of dissolving grade pulp; HWP and SWP, and microcrystalline cellulose in binary solvents, mixtures of 1-ethyl-3-methyl-imidazolium acetate and water, was investigated by turbidity measurements, light microscopy, rheometry, and CP/MAS (13)C-NMR spectroscopy. The viscoelastic properties of the cellulose solutions imply that residual water affect the cellulose dissolution. However, it is not obvious that this always necessarily poses serious drawbacks for the solution properties or that the effects are as severe as previously believed. Turbidity measurements, viscosity data and crystallinity of the regenerated cellulose correlated well and an increased conversion to cellulose II was found at low water and cellulose contents with an apparent maximum of conversion at 2-5 wt% water. At high water content, above 10 wt%, dissolution and conversion was largely inhibited.
Assuntos
Celulose/química , Imidazóis/química , Líquidos Iônicos/química , Água/química , Elasticidade , Espectroscopia de Ressonância Magnética , Nefelometria e Turbidimetria , Solubilidade , Solventes , Temperatura , ViscosidadeRESUMO
The dissolution behaviour of disassociated cellulosic materials in N,N-dimethylacetamide/lithium chloride (DMAc/LiCl) was investigated. The parameters monitored were chromatographic elution profiles and recovered mass by means of gel permeation chromatography (GPC) with RI detection. In order to elucidate the impact of the disassembly on cellulosic fibres, comparative studies were performed with the non-disassociated cellulose counterparts. The importance of the presence of water was addressed by Karl Fischer titration and solvent exchange experiments. Morphological changes during the dissolution process were studied by scanning electron microscopy (SEM). Dissolution of fibrillated cellulosic materials is impeded compared to the non-fibrillated material. This is a consequence of the high-surface-area fibrils prone to retain high amounts of water. Dissolution behaviour of nano-crystalline cellulosic materials appeared to be source-dependent. Due to the absence of entangled networks, these materials retain only water bound at the surface of the nano-crystallites, indicative of both the exposed surface area and solubility. The small cellulose nano-particles extracted from dissolving pulp show lower solubility compared to the large NCC particles from cotton.
Assuntos
Acetamidas/química , Celulose/química , Cloreto de Lítio/química , Nanopartículas/química , Água/química , Celulose/análogos & derivados , Cromatografia em Gel , Fibra de Algodão , Cinética , Microscopia Eletrônica de Varredura , SolubilidadeRESUMO
The hornification process of paper pulp was investigated using solid-state (13)C NMR spectroscopy. Nanocrystalline cellulose was used to serve as a model system of the crystalline parts of the fibrils in pulp fibers. Characterization of the nanocrystalline cellulose dimensions was carried out using scanning electron microscopy. The samples were treated by drying and wetting cycles prior to NMR analysis where the hornification phenomenon was recorded by spectral changes of the cellulose C-4 carbon signals. An increase of the crystalline signal and a decrease of the signals corresponding to the accessible amorphous domains were found for both paper pulp and nanocrystalline cellulose. These spectral changes grew stronger with repeating drying and wetting cycles. The results show that cellulose co-crystallization contribute to hornification. Another conclusion is that the surfaces of higher hydrophobicity in cellulose fibrils have an increased preference for aggregation.