Bio-inspired based meta-heuristic approach for predicting the strength of fiber-reinforced based strain hardening cementitious composites.

A recently introduced bendable concrete having hundred times greater strain capacity provides promising results in repair of engineering structures, known as strain hardening cementitious composites (SHHCs). The current research creates new empirical prediction models to assess the mechanical properties of strain-hardening cementitious composites (SHCCs) i.e., compressive strength (CS), first crack tensile stress (TS), and first crack flexural stress (FS), using gene expression programming (GEP). Wide-ranging records were considered with twelve variables i.e., cement percentage by weight (C%), fine aggregate percentage by weight (Fagg%), fly-ash percentage by weight (FA%), Water-to-binder ratio (W/B), super-plasticizer percentage by weight (SP%), fiber amount percentage by weight (Fib%), length to diameter ratio (L/D), fiber tensile strength (FTS), fiber elastic modulus (FEM), environment temperature (ET), and curing time (CT). The performance of the models was deduced using correlation coefficient (R) and slope of regression line. The established models were also assessed using relative root mean square error (RRMSE), Mean absolute error (MAE), Root squared error (RSE), root mean square error (RMSE), objective function (OBF), performance index (PI) and Nash-Sutcliffe efficiency (NSE). The resulting mathematical GP-based equations are easy to understand and are consistent disclosing the originality of GEP model with R in the testing phase equals to 0.8623, 0.9269, and 0.8645 for CS, TS and FS respectively. The PI and OBF are both less than 0.2 and are in line with the literature, showing that the models are free from overfitting. Consequently, all proposed models have high generalization with less error measures. The sensitivity analysis showed that C%, Fagg%, and ET are the most significant variables for all three models developed with sensitiveness index higher than 10 %. The result of the research can assist researchers, practitioners, and designers to assess SHCC and will lead to sustainable, faster, and safer construction from environment-friendly waste management point of view.

Predicting compressive strength of eco-friendly plastic sand paver blocks using gene expression and artificial intelligence programming.

Plastic sand paver blocks provide a sustainable alternative by using plastic waste and reducing the need for cement. This innovative approach leads to a more sustainable construction sector by promoting environmental preservation. No model or Equation has been devised that can predict the compressive strength of these blocks. This study utilized gene expression programming (GEP) and multi-expression programming (MEP) to develop empirical models to forecast the compressive strength of plastic sand paver blocks (PSPB) comprised of plastic, sand, and fibre in an effort to advance the field. The database contains 135 results for compressive strength with seven input parameters. The R2 values of 0.87 for GEP and 0.91 for MEP for compressive strength reveal a relatively significant relationship between predicted and actual values. MEP outperformed GEP by displaying a higher R2 and lower values for statistical evaluations. In addition, a sensitivity analysis was conducted, which revealed that the sand grain size and percentage of fibres play an essential part in compressive strength. It was estimated that they contributed almost 50% of the total. The outcomes of this research have the potential to promote the reuse of PSPB in the building of green environments, hence boosting environmental protection and economic advantage.

Experimental study on the eco-friendly plastic-sand paver blocks by utilising plastic waste and basalt fibers.

Plastic waste poses a significant hazard to the environment as a result of its high production rates, which endanger both the environment and its inhabitants. Similarly, another concern is the production of cement, which accounts for roughly 8% of global CO2 emissions. Thus, recycling plastic waste as a replacement for cementitious materials may be a more effective strategy for waste minimisation and cement elimination. Therefore, in this study, plastic waste (low-density polyethylene) is utilised in the production of plastic sand paver blocks without the use of cement. In addition to this, basalt fibers which is a green industrial material is also added in the production of eco-friendly plastic sand paver blocks to satisfy the standard of ASTM C902-15 of 20 N/mm2 for the light traffic. In order to make the paver blocks, the LDPE waste plastic was melted outside in the open air and then combined with sand. Variations were made to the ratio of LDPE to sand, the proportion of basalt fibers, and sand particle size. Paver blocks were evaluated for their compressive strength, water absorption, and at different temperatures. Including 0.5% percent basalt fiber of length 4 mm gives us the best result by enhancing compressive strength by 20.5% and decreasing water absorption by 50.5%. The best results were obtained with a ratio of 30:70 LDPE to sand, while the finest sand provides the greatest compressive strength. Moreover, the temperature effect was also studied from 0 to 60 °C, and the basalt fibers incorporated in plastic paver blocks showed only a 20% decrease in compressive strength at 60 °C. This research has produced eco-friendly paver blocks by removing cement and replacing it with plastic waste, which will benefit the environment, save money, reduce carbon dioxide emissions, and be suitable for low-traffic areas, all of which contribute to sustainable development.

A scientometric analysis approach on the plastic sand.

The purpose of this research was to conduct a scientometric evaluation of the literature pertaining to plastic sand in order to evaluate its many aspects. Conventional review studies have several limitations when it comes to their capacity to completely and properly link different sections of the published research. Some of the more complicated features of advanced research are co-occurrence analysis, science mapping and co-citation analysis. During the study, the most inventive authors/researchers renowned for citations, the sources with the largest number of publications, the actively involved domains, and co-occurrences of keywords in the research on plastic sand are investigated. This study is limited to scientometric analysis of the available literature data on plastic sand. The VOSviewer application (version 1.6.18) was used to perform the analysis after bibliometric data for 4512 publications were extracted from the Scopus database and utilised in the extraction process from the year 2021 to June 2022. With the support of a statistical and graphical description of researchers and nations that are contributing, this study will aid researchers in the establishment of collaborative ventures and the exchange of fresh techniques and ideas with one another.