Tmem2 Deficiency Leads to Enamel Hypoplasia and Soft Enamel in Mouse.

Teeth consist of 3 mineralized tissues: enamel, dentin, and cementum. Tooth malformation, the most common craniofacial anomaly, arises from complex genetic and environmental factors affecting enamel structure, size, shape, and tooth eruption. Hyaluronic acid (HA), a primary extracellular matrix component, contributes to structural and physiological functions in periodontal tissue. Transmembrane protein 2 (TMEM2), a novel cell surface hyaluronidase, has been shown to play a critical role during embryogenesis. In this study, we demonstrate Tmem2 messenger RNA expression in inner enamel epithelium and presecretory, secretory, and mature ameloblasts. Tmem2 knock-in reporter mice reveal TMEM2 protein localization at the apical and basal ends of secretory ameloblasts. Micro-computed tomography analysis of epithelial-specific Tmem2 conditional knockout (Tmem2-CKO) mice shows a significant reduction in enamel layer thickness and severe enamel deficiency. Enamel matrix protein expression was remarkably downregulated in Tmem2-CKO mice. Scanning electron microscopy of enamel from Tmem2-CKO mice revealed an irregular enamel prism structure, while the microhardness and density of enamel were significantly reduced, indicating impaired ameloblast differentiation and enamel matrix mineralization. Histological evaluation indicated weak adhesion between cells and the basement membrane in Tmem2-CKO mice. The reduced and irregular expressions of vinculin and integrin ß1 suggest that Tmem2 deficiency attenuated focal adhesion formation. In addition, abnormal HA accumulation in the ameloblast layer and weak claudin 1 immunoreactivity in Tmem2-CKO mice indicate impaired tight junction gate function. Irregular actin filament assembly was also observed at the apical and basal ends of secretory ameloblasts. Last, we demonstrated that Tmem2-deficient mHAT9d mouse ameloblasts exhibit defective adhesion to HA-containing substrates in vitro. Collectively, our data highlight the importance of TMEM2 in adhesion to HA-rich extracellular matrix, cell-to-cell adhesion, ameloblast differentiation, and enamel matrix mineralization.

Role of Heparan Sulfate in Vasculogenesis of Dental Pulp Stem Cells.

Dental pulp stem cells (DPSCs) can differentiate into vascular endothelial cells and display sprouting ability. During this process, DPSC responses to the extracellular microenvironment and cell-extracellular matrix interactions are critical in regulating their ultimate cell fate. Heparan sulfate (HS) glycosaminoglycan, a major component of extracellular matrix, plays important roles in various biological cell activities by interacting with growth factors and relative receptors. However, the regulatory function of HS on vasculogenesis of mesenchymal stem cells remains unclear. The objective of this study was to investigate the role of HS in endothelial differentiation and vasculogenesis of DPSCs. Our results show that an HS antagonist suppressed the proliferation and sprouting ability of DPSCs undergoing endothelial differentiation. Furthermore, expression of proangiogenic markers significantly declined with increasing dosages of the HS antagonist; in contrast, expression of stemness marker increased. Silencing of exostosin 1 (EXT1), a crucial glycosyltransferase for HS biosynthesis, in DPSCs using a short hairpin RNA significantly altered their gene expression profile. In addition, EXT1-silenced DPSCs expressed lower levels of endothelial differentiation markers and displayed a reduced vascular formation capacity compared with control DPSCs transduced with scrambled sequences. The sprouting ability of EXT1-silenced DPSCs was rescued by the addition of exogenous HS in vitro. Next, we subcutaneously transplanted biodegradable scaffolds seeded with EXT1-silenced or control DPSCs into immunodeficient mice. Lumen-like structures positive for human CD31 and von Willebrand factor were formed by green fluorescent protein-transduced DPSCs. Numbers of blood-containing vessels were significantly lower in scaffolds loaded with EXT1-silenced DPSCs than specimens implanted with control DPSCs. Collectively, our findings unveil the crucial role of HS on endothelial differentiation and vasculogenesis of DPSCs, opening new perspectives for the application of HS to tissue engineering and dental pulp regeneration.

Interpretable AI Explores Effective Components of CAD/CAM Resin Composites.

High flexural strength of computer-aided manufacturing resin composite blocks (CAD/CAM RCBs) are required in clinical scenarios. However, the conventional in vitro approach of modifying materials' composition by trial and error was not efficient to explore the effective components that contribute to the flexural strength. Machine learning (ML) is a powerful tool to achieve the above goals. Therefore, the aim of this study was to develop ML models to predict the flexural strength of CAD/CAM RCBs and explore the components that affect flexural strength as the first step. The composition of 12 commercially available products and flexural strength were collected from the manufacturers and literature. The initial data consisted of 16 attributes and 12 samples. Considering that the input data for each sample were recognized as a multidimensional vector, a fluctuation range of 0.1 was proposed for each vector and the number of samples was augmented to 120. Regression algorithms-that is, random forest (RF), extra trees, gradient boosting decision tree, light gradient boosting machine, and extreme gradient boosting-were used to develop 5 ML models to predict flexural strength. An exhaustive search and feature importance analysis were conducted to analyze the effective components that affected flexural strength. The R2 values for each model were 0.947, 0.997, 0.998, 0.983, and 0.927, respectively. The relative errors of all the algorithms were within 15%. Among the high predicted flexural strength group in the exhaustive search, urethane dimethacrylate was contained in all compositions. Filler content and triethylene glycol dimethacrylate were the top 2 features predicted by all models in the feature importance analysis. ZrSiO4 was the third important feature for all models, except the RF model. The ML models established in this study successfully predicted the flexural strength of CAD/CAM RCBs and identified the effective components that affected flexural strength based on the available data set.

Immobilizing Bactericides on Dental Resins via Electron Beam Irradiation.

Polymerizable bactericides, such as quaternary ammonium compound-based monomers, have been intensively studied as candidates for immobilizing antibacterial components on dental resin. However, they predominantly exhibit a bacteriostatic behavior, rather than bactericidal, as the immobilized components are left with insufficient molecular movement to disrupt the bacterial surface structure through contact-mediated action. In this study, we developed a novel strategy to increase the density of the immobilized bactericide and enhance its antibacterial/antibiofilm properties by combining a surface-grafting technique with electron beam irradiation. A solution of the quaternary ammonium compound-based monomer, 12-methacryloyloxydodecylpyridinium bromide (MDPB), was coated on polymethyl methacrylate (PMMA) resin specimens at the concentrations of 30, 50, and 80 wt%. The coated resins were subsequently exposed to 10 MeV of electron beam irradiation at 50 and 100 kGy, followed by thermal stabilization at 60 °C. The antibacterial effect was evaluated by inoculating a Streptococcus mutans suspension on the coated PMMA resin samples, which exhibited bactericidal effects even after 28 d of aging (P < 0.05, Tukey's honestly significant difference test). Transmission electron microscopy and bacteriolytic activity evaluation revealed that the S. mutans cells had sustained membrane depolarization. Furthermore, the antibiofilm effects against S. mutans and bacteria collected from human saliva were assessed. The thickness and the percentage of membrane-intact cells of the S. mutans and multispecies biofilms formed on the MDPB-immobilized surfaces were significantly lower than the uncoated PMMA specimens, even after 28-d aging (P< 0.05, Tukey's honestly significant difference test). Thus, the immobilization of antibacterial MDPB via electron beam irradiation induced rapid membrane depolarization, increasing membrane permeability and eventually causing cell death. Our strategy substantially enhances the antibacterial properties of the resinous materials and inhibits biofilm formation, therefore demonstrating significant potential for preventing infectious diseases in the oral environment.

Fabrication of Vascularized DPSC Constructs for Efficient Pulp Regeneration.

Dental pulp regeneration is a promising approach to restore the vitality of necrotic teeth. We have previously reported the fabrication of scaffold-free cell constructs containing only dental pulp stem cells (DPSCs) and their ability to form pulp-like tissue in the pulpless tooth. However, the DPSC construct could not build pulp-like tissue with a full root length because it is difficult to induce blood vessels from a small root canal foramen. Therefore, we hypothesized that vascular structure could be preformed in the DPSC construct by employing endothelial differentiation capability of DPSCs, and vascularized constructs might facilitate dental pulp regeneration in the pulpless tooth. In this study, vascularized DPSC constructs were fabricated by inducing endothelial differentiation, and then we investigated the behavior of differentiated DPSCs, the internal structure of cell constructs, and their pulp regenerative ability in vivo. We observed that DPSCs positive for CD31 and von Willebrand factor were localized at the outer layer of constructs and formed a reticulated lumen structure. The cells constituting the outer layer of the construct expressed endothelial differentiation markers at higher levels than cells in the inner part. These results indicated that DPSCs in the outer layer differentiated into endothelial cells and formed vascular-like structures in the cell construct. Next, a vascularized DPSC construct was transplanted into the human pulpless tooth that was implanted into immunodeficient mice in the subcutaneous space. After 6 wk of implantation, the vascularized construct formed pulp-like tissues with higher density of human CD31-positive blood vessels when compared with specimens implanted with a DPSC construct without prevascularization. These results suggest that the vascular structure formed in the DPSC construct facilitated the blood supply and enhanced pulp regeneration. This study demonstrates that a vascularized DPSC construct is a prospective biomaterial as an implant for novel dental pulp regeneration.

VE-Cadherin and Anastomosis of Blood Vessels Formed by Dental Stem Cells.

It is known that dental pulp stem cells (DPSCs) can be induced to differentiate into vasculogenic endothelial (VE) cells. However, the process that results in sprouting and anastomosis of DPSC-derived vessels remains unclear. Here, we performed studies to understand the mechanisms underpinning the anastomosis of the host vasculature with blood vessels generated by DPSCs (a model for mesenchymal stem cells). VE-cadherin-silenced primary human DPSCs seeded in tooth slice/scaffolds and transplanted into the subcutaneous space of immunodeficient mice generated fewer functional blood vessels (i.e., anastomosed with the host vasculature) than control DPSCs transduced with scrambled sequences. Both VE-cadherin-silenced and mitogen-activated protein kinase kinase 1 (MEK1)-silenced cells showed a decrease in the number of capillary sprouts in vitro. Interestingly, DPSC stably transduced with a VE-cadherin reporter demonstrated that vascular endothelial growth factor (VEGF) induces VE-cadherin expression in sprouting DPSCs undergoing anastomosis, but not in quiescent DPSCs. To begin to understand the mechanisms regulating VE-cadherin, we stably silenced MEK1 and observed that VEGF was no longer able to induce VE-cadherin expression and capillary sprout formation. Notably ERG, a transcriptional factor downstream from MEK/ERK, binds to the promoter region of VE-cadherin (chip assay) and is induced by VEGF in DPSCs. Collectively, these data defined a signaling pathway triggered by VEGF that results in phosphorylation of MEK1/ERK and activation of ERG leading to expression of VE-cadherin, which is required for anastomosis of DPSC-derived blood vessels. In conclusion, these results unveiled a signaling pathway that enables the generation of functional blood vessels upon vasculogenic differentiation of DPSCs.

Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI.

A preventive measure for debonding has not been established and is highly desirable to improve the survival rate of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin (CR) crowns. The aim of this study was to assess the usefulness of deep learning with a convolution neural network (CNN) method to predict the debonding probability of CAD/CAM CR crowns from 2-dimensional images captured from 3-dimensional (3D) stereolithography models of a die scanned by a 3D oral scanner. All cases of CAD/CAM CR crowns were manufactured from April 2014 to November 2015 at the Division of Prosthodontics, Osaka University Dental Hospital (Ethical Review Board at Osaka University, approval H27-E11). The data set consisted of a total of 24 cases: 12 trouble-free and 12 debonding as known labels. A total of 8,640 images were randomly divided into 6,480 training and validation images and 2,160 test images. Deep learning with a CNN method was conducted to develop a learning model to predict the debonding probability. The prediction accuracy, precision, recall, F-measure, receiver operating characteristic, and area under the curve of the learning model were assessed for the test images. Also, the mean calculation time was measured during the prediction for the test images. The prediction accuracy, precision, recall, and F-measure values of deep learning with a CNN method for the prediction of the debonding probability were 98.5%, 97.0%, 100%, and 0.985, respectively. The mean calculation time was 2 ms/step for 2,160 test images. The area under the curve was 0.998. Artificial intelligence (AI) technology-that is, the deep learning with a CNN method established in this study-demonstrated considerably good performance in terms of predicting the debonding probability of a CAD/CAM CR crown with 3D stereolithography models of a die scanned from patients.

Pulp Regeneration by 3-dimensional Dental Pulp Stem Cell Constructs.

Dental pulp regeneration therapy for the pulpless tooth has attracted recent attention, and clinical trial studies are underway with the tissue engineering approach. However, there remain many concerns, including the extended period for regenerating the dental pulp. In addition, the use of scaffolds increases the risk of inflammation and infection. To establish a basic technology for novel dental pulp regenerative therapy that allows transplant of pulp-like tissue, we attempted to fabricate scaffold-free 3-dimensional (3D) cell constructs composed of dental pulp stem cells (DPSCs). Furthermore, we assessed viability of these 3D DPSC constructs for dental pulp regeneration through in vitro and in vivo studies. For the in vitro study, we obtained 3D DPSC constructs by shaping sheet-like aggregates of DPSCs with a thermoresponsive hydrogel. DPSCs within constructs remained viable even after prolonged culture; furthermore, 3D DPSC constructs possessed a self-organization ability necessary to serve as a transplant tissue. For the in vivo study, we filled the human tooth root canal with DPSC constructs and implanted it subcutaneously into immunodeficient mice. We found that pulp-like tissues with rich blood vessels were formed within the human root canal 6 wk after implantation. Histologic analyses revealed that transplanted DPSCs differentiated into odontoblast-like mineralizing cells at sites in contact with dentin; furthermore, human CD31-positive endothelial cells were found at the center of regenerated tissue. Thus, the self-organizing ability of 3D DPSC constructs was active within the pulpless root canal in vivo. In addition, blood vessel-rich pulp-like tissues can be formed with DPSCs without requiring scaffolds or growth factors. The technology established in this study allows us to prepare DPSC constructs with variable sizes and shapes; therefore, transplantation of DPSC constructs shows promise for regeneration of pulpal tissue in the pulpless tooth.

Development of a Cavity Disinfectant Containing Antibacterial Monomer MDPB.

An experimental cavity disinfectant (ACC) that is intended to be used for various direct and indirect restorations was prepared by adding an antibacterial monomer 12-methacryloyloxydodecylpyridinum bromide (MDPB) at 5% into 80% ethanol. The antibacterial effectiveness of ACC and its influences on the bonding abilities of resin cements were investigated. To examine the antibacterial activity of unpolymerized MDPB, the minimum inhibitory and bactericidal concentrations (MIC and MBC) were determined for Streptococcus mutans, Lactobacillus casei, Actinomyces naeslundii, Parvimonas micra, Enterococcus faecalis, Fusobacterium nucleatum, and Porphyromonas gingivalis Antibacterial activities of ACC and the commercial cavity disinfectant containing 2% chlorhexidine and ethanol (CPS) were evaluated by agar disk diffusion tests through 7 bacterial species and by MIC and MBC measurement for S. mutans The effects of ACC and CPS to kill bacteria in dentinal tubules were compared with an S. mutans-infected dentin model. Shear bond strength tests were used to examine the influences of ACC on the dentin-bonding abilities of a self-adhesive resin cement and a dual-cure resin cement used with a primer. Unpolymerized MDPB showed strong antibacterial activity against 7 oral bacteria. ACC produced inhibition zones against all bacterial species similar to CPS. For ACC and CPS, the MIC value for S. mutans was identical, and the MBC was similar with only a 1-step dilution difference (1:2). Treatment of infected dentin with ACC resulted in significantly greater bactericidal effects than CPS (P < 0.05, analysis of variance and Tukey's honest significant difference test). ACC showed no negative influences on the bonding abilities to dentin for both resin cements, while CPS reduced the bond strength of the self-adhesive resin cement (P < 0.05). This study clarified that the experimental cavity disinfectant containing 5% MDPB is more effective in vitro than the commercially available chlorhexidine solution to eradicate bacteria in dentin, without causing any adverse influences on the bonding abilities of resinous luting cements.

Gold Nanoparticles Inhibit Matrix Metalloproteases without Cytotoxicity.

Nanoparticles (NPs) are currently the focus of considerable attention for dental applications; however, their biological effects have not been fully elucidated. The long-term, slow release of matrix metalloproteases (MMPs) digests collagen fibrils within resin-dentin bonds. Therefore, MMP inhibitors can prolong the durability of resin-dentin bonds. However, there have been few reports evaluating the combined effect of MMP inhibition and the cytotoxic effects of NPs for dentin bonding. The aim of this study was to evaluate MMP inhibition and cytotoxic responses to gold (AuNPs) and platinum nanoparticles (PtNPs) stabilized by polyvinylpyrrolidone (PVP) in cultured murine macrophages (RAW264) by using MMP inhibition assays, measuring cell viability and inflammatory responses (quantitative reverse transcription polymerase chain reaction [RT-qPCR]), and conducting a micromorphological analysis by fluorescence and transmission electron microscopy. Cultured RAW264 cells were exposed to metal NPs at various concentrations (1, 10, 100, and 400 µg/mL). AuNPs and PtNPs markedly inhibited MMP-8 and MMP-9 activity. Although PtNPs were cytotoxic at high concentrations (100 and 400 µg/mL), no cytotoxic effects were observed for AuNPs at any concentration. Transmission electron microscopy images showed a significant nonrandom intercellular distribution for AuNPs and PtNPs, which were mostly observed to be localized in lysosomes but not in the nucleus. RT-qPCR analysis demonstrated inflammatory responses were not induced in RAW264 cells by AuNPs or PtNPs. The cytotoxicity of nanoparticles might depend on the core metal composition and arise from a "Trojan horse" effect; thus, MMP inhibition could be attributed to the surface charge of PVP, which forms the outer coating of NPs. The negative charge of the surface coating of PVP binds to Zn(2+) from the active center of MMPs by chelate binding and results in MMP inhibition. In summary, AuNPs are attractive NPs that effectively inhibit MMP activity without cytotoxicity or inflammatory responses.

Development of an antibacterial root canal filling system containing MDPB.

An antibacterial monomer 12-methacryloyloxydodecylpyridinum bromide (MDPB)-containing experimental, chemically cured primer was prepared to develop a new resin-based root canal filling system. This study investigated the antibacterial effects of the MDPB-containing primer (experimental primer [EP]) against Enterococcus faecalis and assessed the in vitro bonding and sealing abilities of the filling system, consisting of EP and a Bis-GMA-based sealer resin. Antibacterial effects of EP were evaluated by contact with planktonic or adherent bacteria for 30 or 60 sec, and the viable bacterial number was counted. The antibacterial effects against E. faecalis in dentinal tubules were also assessed, according to a root canal infection model. Bonding and sealing abilities of the experimental filling system were examined by microtensile bond strength tests and leakage tests based on fluid filtration methods. Significantly greater reduction in viable bacteria in planktonic and adherent form was obtained by short-period contact with EP compared with the control primer (without MDPB) or with the proprietary (Epiphany) primer (p < .05). Significantly greater bactericidal effects of the EP inside the dentinal tubule of root, as opposed to the control primer or Epiphany primer, were confirmed according to a root canal infection model (p < .05), and 100% killing of E. faecalis could be obtained by the application of EP after irrigation with a 5% sodium hypochlorite solution. The experimental endodontic filling system demonstrated significantly greater bond strength to root dentin than Epiphany sealer system (Epiphany primer and Epiphany Root Canal Sealant; p < .05), showing formation of resin tags and a hybridized layer. Leakage tests clarified that the experimental system provided excellent sealing. This study confirmed that the MDPB-containing experimental antibacterial primer has the ability to effectively disinfect the root canal. Additionally, the experimental root canal filling system employing this primer and the Bis-GMA-based sealer resin is useful for achieving good sealing, suggesting its possible benefit for successful endodontic treatments.

Clinical guidelines for treating caries in adults following a minimal intervention policy--evidence and consensus based report.

OBJECTIVES: In 2002, FDI (World Dental Federation) published a policy advocating that caries be treated by minimal intervention (MI). This MI policy has been accepted worldwide and is taught in universities. But acceptance in general dental practice has been slower, especially in Japan where healthcare payment and practice favour drilling and filling. To help disseminate this MI policy into general practice, the Japanese Society of Conservative Dentistry developed an evidence-based clinical guideline for restoring carious permanent teeth in adult patients. METHODS: The guideline was developed by a committee of nine university clinicians and a librarian. The committee selected the most frequent clinical questions in treating caries and used electronic databases to search and assess the best scientific evidence for each. Members then added their clinical experience and discussed to reach consensus on each question on treating caries with MI policy. Graded recommendations and guidance were made for each clinical question. The provisional guideline was strengthened after review and discussion with university researchers and general practitioners. RESULTS: The guideline addresses the 16 most frequent clinical questions in treating adult caries, including restorative methods and how to tackle root caries. Recommendations for treatment using MI policy were developed using the best scientific evidence and consensus of experienced clinicians. CLINICAL SIGNIFICANCE: The guideline offers a practical expert view of treating caries with the MI policy that incorporates the best scientific evidence, the latest techniques, the most preferable materials and the general consensus of expert clinicians.

A randomised trial comparing the antibacterial effects of dentine primers against bacteria in natural root caries.

As people are living longer and retaining their teeth into old age, root caries is an increasingly significant problem. A minimally invasive treatment strategy, involving sealing the root caries lesion with an antibacterial resin sealant, could be highly beneficial. The aim of this study was to compare the antibacterial properties of the primers of two proprietary dentine bonding agents, Clearfil SE Bond (SE; Kuraray Medical, Japan) and Clearfil Protect Bond (PB; Kuraray Medical), which contains the antibacterial monomer methacryloyloxydodecylpyridinium bromide. Fifty-two root caries lesions were identified and randomly assigned to a primer. The lesion was cleaned, isolated, sampled with a sharp spoon excavator, a primer applied and a second sample taken. Samples were transported in fastidious anaerobe broth, vortex-dispersed and serial dilutions inoculated onto selective agars. Reduction in colony-forming units (CFU, %) after primer application was calculated for both primers for bacterial growth on each selective agar and compared to a hypothesised mean of 100% (one-sample t test, p < 0.05). No significant differences between primers were seen, indicating efficient bacterial elimination by both materials. Comparing percent reduction between SE and PB for each agar (Mann-Whitney test, p < 0.05), a significantly greater CFU reduction by PB was seen for streptococci but not other bacteria. More lesions exhibited bacterial growth and several lesions demonstrated marked bacterial growth after treatment with SE compared with PB. Therefore, PB appears to exhibit superior antimicrobial properties, particularly against streptococci. Both primers are highly antibacterial towards root caries bacteria and may therefore be suitable for minimally invasive treatment.

The inhibitory effects of quaternary ammonium methacrylates on soluble and matrix-bound MMPs.

Matrix metalloproteinases (MMPs) bound to dentin contribute to the progressive degradation of collagen fibrils in hybrid layers created by dentin adhesives. This study evaluated the MMP-inhibiting potential of quaternary ammonium methacrylates (QAMs), with soluble rhMMP-9 and a matrix-bound endogenous MMP model. Six different QAMs were initially screened by a rhMMP-9 colorimetric assay. For the matrix-bound endogenous MMPs, we aged demineralized dentin beams for 30 days in calcium- and zinc-containing media (CM; control), chlorhexidine, or QAMs in CM to determine the changes in dry mass loss and solubilization of collagen peptides against baseline levels. The inhibitory effects of QAMs on soluble rhMMP-9 varied between 34 and 100%. Beams incubated in CM showed a 29% decrease in dry mass (p < 0.05), whereas beams incubated with QAMs showed only 0.2%-6% loss of dry mass. Significantly more solubilized collagen was detected from beams incubated in CM (p < 0.05). It is concluded that QAMs exhibited dentin MMP inhibition comparable with that of chlorhexidine, but required higher concentrations.

Antibacterial effects of MDPB against anaerobes associated with endodontic infections.

AIM: To investigate the antibacterial effects of 12-methacryloyloxydodecylpyridinium bromide (MDPB), an antibacterial monomer synthesized by combining quaternary ammonium with a methacryloyl group, against three anaerobes associated with endodontic infections using planktonic and biofilm cells. METHODOLOGY: The antibacterial activity of unpolymerized MDPB against Enterococcus faecalis, Fusobacterium nucleatum and Prevotella nigrescens was examined by agar-disc diffusion tests and determination of the minimum inhibitory/bactericidal concentrations (MIC/MBC). Rapid killing effects of MDPB against three bacteria in planktonic form were examined by a cell number counting method, and those against biofilm cells were assessed by a viability staining method. RESULTS: MDPB demonstrated inhibition against all of the bacteria tested by agar-disc diffusion tests. The MIC/MBC values of MDPB for the three anaerobes were much smaller than those of other resin monomers, although greater compared with those of cetylpyridinium chloride or chlorhexidine diacetate for E. faecalis and F. nucleatum. Significant reduction in viable planktonic cells was obtained by contact with 250 microg mL(-1) of MDPB for 20 s (P < 0.05, Fisher's PLSD tests), and 40 s contact with 500 microg mL(-1) or 20 s contact with 1000 microg mL(-1) of MDPB resulted in more than 90% killing. Biofilm cells of all species were completely killed by application of 1000 microg mL(-1) of MDPB for 60 s. CONCLUSION: MDPB was found to have strong antibacterial effects against E. faecalis, F. nucleatum and P. nigrescens, and such effects were rapidly exhibited even against biofilm cells, suggesting the usefulness of application of MDPB to resin-based materials for root canal filling.

An explanation of the mineralization mechanism in osteoblasts induced by calcium hydroxide.

Calcium hydroxide (Ca(OH)(2)) has been broadly used in endodontics, including apexification to obtain apical closure by mineralization. However, the detailed mechanism of mineralization induced by Ca(OH)(2) is still unclear. This study focuses on the function of calcium and hydroxyl ions which dissociate from Ca(OH)(2) during the mineralization process. Though primary osteoblasts cultured in the medium without or with 0.025mgml(-1) Ca(OH)(2) did not show mineralization, they did exhibit mineralization when they were cultured with a higher concentration of Ca(OH)(2) (0.25mgml(-1)). Mineralization induced in the presence of 0.25mgml(-1) Ca(OH)(2) was greater at pH 7.4 than at pH 8.5. The high mineralization activity observed under neutral conditions was caused by the prolonged activation of p38 and JNK. Hydroxyl ions did not have any effect on the mineralization. The results demonstrate that calcium ions dissociated from Ca(OH)(2) are critical for inducing the mineralization of osteoblasts.

Effects of erbium:yttrium-aluminum-garnet and neodymium:yttrium-aluminum-garnet laser hypersensitivity treatment parameters on the bond strength of self-etch adhesives.

This in vitro study evaluated the shear bond strength (SBS) of two self-etch adhesives to coronal and root dentin treated with erbium:yttrium-aluminum-garnet (Er:YAG) or neodymium:yttrium-aluminum-garnet (Nd:YAG) lasers for dentin hypersensitivity. The coronal and root dentin surfaces of 60 extracted human cuspids were divided into three groups (n = 20): (1) control (without treatment); (2) treated with Er:YAG; (3) treated with Nd:YAG laser and a one-step (S3) or two-step self-etch adhesive (SE). A nano-composite was applied and SBS tests were performed. The mean SBS values were calculated, failure modes were determined, and data were subjected to statistical analysis (P = 0.05). Control/SE exhibited higher values than did control/S3 and Nd:YAG/S3 on coronal dentin (P < 0.05). No significant differences were observed between the SE and S3 groups in root dentin (P > 0.05). Comparisons of two dentin substrates did not show any difference except control/SE (P < 0.05). The failure modes were mainly adhesive. The SBSs of self-etch adhesives to Er:YAG or Nd:YAG laser-treated surfaces were comparable with control for both coronal and root dentin.

Antibacterial effect of chlorhexidine- containing glass ionomer cement in vivo: a pilot study.

This in vivo pilot study was carried out to test the antibacterial effect of glass ionomer containing chlorhexidine (test group) in comparison to conventional glass ionomer (control group). Fifty 6- to 11-year-old children with one occlusal lesion in a molar were randomly allocated to test and control groups in a parallel-group design. The cavity walls and one half of the floor were cleaned and restored with one of the materials without dentine conditioning. The restorations were removed after 7 days. Dentine samples were taken from the cleaned (affected dentine) and noncleaned area (infected dentine) at baseline and at day 7. Samples were anaerobically and aerobically cultivated for mutans streptococci, lactobacilli and total viable bacterial count (TVC) following common laboratory procedures. ANCOVA was used to test for treatment effects. Seven days after treatment, a significant decrease in anaerobic and aerobic bacterial counts (p = 0.0001) was shown. Lower numbers of anaerobic lactobacilli (p = 0.02), TVC (p = 0.008) and aerobic lactobacilli and TVC (p = 0.03), but not of mutans streptococci, were indicated in the test group compared to the control group. A significant reduction in aerobic lactobacilli from infected dentine treated with the glass ionomer containing chlorhexidine (p = 0.05) was observed whereas in affected dentine, anaerobic mutans streptococci, lactobacilli and TVC and aerobic TVC and mutans streptococci were significantly lower in the test group 7 days after treatment (p = 0.01). We conclude that the present pilot study revealed lower microorganism counts in chlorhexidine-containing glass ionomers than in conventional glass ionomers for both affected and infected dentine over a 7-day period.