Construction and validation of a scoring system to predict resistance to chemotherapeutic drugs using gene expression profiles in canine lymphoma.

The present study aimed to verify the changes in the expression levels of 13 candidate genes associated with chemotherapy resistance and to construct a scoring system to predict resistance to these drugs. The expression levels of the 13 candidate genes were compared between 20 dogs with lymphoma that were sensitive to drugs used in CHOP-based protocol and 16 dogs with lymphoma that were resistant to these drugs. The expression levels of six genes; ASNS, CCR3, CALCA, FCER1A, LOC448801, and EDNRB were significantly different between the two groups. A scoring system to predict resistance to cyclophosphamide, doxorubicin and vincristine, which are used in CHOP-based protocol, was constructed based on expression levels of the six genes in these 36 dogs using logistic regression models. After internal validation, sensitivity and specificity of the scoring system were 0.759 and 0.853, respectively. External validation was conducted in another cohort of 33 dogs with lymphoma, and sensitivity and specificity of the scoring system were 0.800 and 0.696, respectively. In conclusion, this study identified six genes associated with resistance to drugs used in CHOP-based protocol in canine lymphoma and proposed a novel scoring system to predict resistance to these drugs. This system might be beneficial in selecting the most appropriate chemotherapy protocol for individual dogs with lymphoma.

Periodontal therapy for patients before and after radiotherapy: A review of the literature and topics of interest for clinicians.

BACKGROUND: To review and discuss important topics regarding periodontal treatment pre- and post-radiotherapy for head and neck cancer in human patients; to discuss the references for adequate techniques, the appropriate moment for tooth extractions and periodontal management; and to discuss the prevention of osteoradionecrosis. MATERIAL AND METHODS: Thirty-nine studies including original studies, randomized clinical trials (RCTs) and reviews were searched in online databases MEDLINE (PubMed) and the Cochrane library. No year of publication restriction was applied. RESULTS: Language was restricted to English, and the following Medical Subject Heading terms were used: radiotherapy, radiation therapy and periodontal treatment. Studies regarding periodontal treatment and tooth extraction that involved clinical management of irradiated patients were selected. CONCLUSIONS: The treatment of periodontal diseases before radiotherapy is mainly required to avoid future dental extraction and to reduce the development of osteoradionecrosis. Periodontal treatment in irradiated patients mostly includes scaling and root planing, extraction of condemned teeth and topical and systemic antimicrobial therapy. Tooth removal should be planned at least 14 days before the first day of radiation treatment. Particular care and mouthwashes should be taken during and after radiation. CLINICAL SIGNIFICANCE: The management of irradiated patients represents a challenge for health professionals, including dentists. It is important to establish recommendations for clinicians concerning dental and periodontal management in irradiated patients before, during and after treatment.

On-site evaluation of Wagyu beef carcasses based on the monounsaturated, oleic, and saturated fatty acid composition using a handheld fiber-optic near-infrared spectrometer.

The fat quality is an important aspect, especially for Wagyu beef. A handheld fiber-optic near-infrared spectrometer for on-site evaluation of beef fat quality was developed, and the interactance spectra of the intermuscular fat from 833 Wagyu carcasses at 12 markets were measured. The calibration model was transferred to five slave instruments using twenty-six block samples. The performance of one slave instrument was verified at five meat markets (n=360). The coefficients of determination of the slave instrument for monounsaturated, oleic, and saturated fatty acid compositions determined by gas chromatography and near-infrared measurements were 0.69, 0.64, and 0.67, respectively. The standard error of prediction for the slave instrument was approximately 2%. The fiber-optic near-infrared spectrometers were highly accurate in the fat quality evaluation of Wagyu carcasses based on monounsaturated, oleic, and saturated fatty acid composition with easy calibration model transfer.

Therapeutic Effect of Sirolimus for Lymphangioleiomyomatosis Remaining in the Abdominopelvic Region After Lung Transplantation: A Case Report.

PURPOSE: Sirolimus (SRL) is used to treat pulmonary lymphangioleiomyomatosis (P-LAM). There is limited evidence that SRL has systemic efficacy for the patients with extrapulmonary lymphangioleiomyomatosis (E-LAM) remaining after lung transplantation (LT) for P-LAM. This report examines the efficacy of SRL treatment for the patient with E-LAM remaining after an LT for P-LAM. CASE SUMMARY: The course of the patient's recovery from an LT for P-LAM was complicated by lymphedema in the left femoral region that was caused by two E-LAM lesions remaining in the left pelvic cavity and in the retroperitoneal area. After the LT was performed, the patient started SRL treatment to reduce the E-LAM lesions. The daily SRL dose, selected based on the standard SRL dose for P-LAM, was initiated at 1 mg/d and was maintained at 2 mg/d. The remaining E-LAM lesions and lymphedema in the left femoral region improved in approximately 9 months after the LT with the administration of both SRL and the standard immunosuppressive therapy used by Okayama University Hospital, including tacrolimus, mycophenolate mofetil, and prednisolone. The SRL and tacrolimus trough concentrations in whole blood were maintained within the therapeutic window for the next 1.5 years after initiation of SRL treatment. The patient experienced no severe adverse events that required discontinuation of the SRL treatment during this time. CONCLUSION: The patients with remaining E-LAM lesions may receive SRL treatment to improve the quality of life after LT for P-LAM as effective therapy in cases where the patient's recovery is complicated by E-LAM lesions.

Relationship between serotonin transporter occupancies and analgesic effects of AS1069562, the (+)-isomer of indeloxazine, and duloxetine in reserpine-induced myalgia rats.

Serotonin (5-HT) and norepinephrine (NE) have been implicated in the mediation of endogenous analgesic mechanisms via the descending inhibitory pain pathway in the brain, and dysfunction in both the 5-HT and NE systems has been suggested as an etiology of fibromyalgia (FM). Given that 5-HT reuptake inhibition in the brain appears to be associated with pain reduction, this mechanism might exert an analgesic effect also on pain associated with FM. In this case, it would be of interest to investigate the correlation of 5-HT transporter (SERT) occupancy with in vivo analgesic effect on pain associated with FM. Here, we investigated the relationship between SERT occupancies and the analgesic effects of AS1069562, the (+)-isomer of indeloxazine, and duloxetine, which are both 5-HT and NE reuptake inhibitors (SNRIs), on muscular pain in reserpine-induced myalgia (RIM) rats, an animal model of FM-like chronic pain. We also investigated the SERT occupancy level necessary for AS1069562 and duloxetine to exert analgesic effects on muscular pain. AS1069562 and duloxetine attenuated muscular hyperalgesia in RIM rats, representing the first findings to be reported regarding the analgesic effect of AS1069562 on pain associated with FM. SERT occupancy levels of AS1069562 and duloxetine increased in both dose- and plasma and brain concentration-dependent manners. SERT occupancy levels of AS1069562 and duloxetine were significantly correlated with efficacy on muscular pain thresholds in RIM rats. This finding concerning the precise correlation of SERT occupancy with in vivo analgesic effect on pain associated with FM is reported here for the first time. SERT occupancy level above 70% was necessary for AS1069562 and duloxetine to exert significant analgesic effects on muscular pain. These results suggest that SERT occupancy level is useful in determining appropriate analgesic doses of AS1069562 and duloxetine for treating pain symptoms in FM patients.

New theoretical model to measure pressure produced during impression procedure for complete dentures-Visual inspection of impression material flow.

OBJECTIVE: A theoretical model, based on fluid dynamics, was developed to measure impression pressure. The purpose of this study was to evaluate the validity of this theoretical model by comparing its theoretical analysis against actual pressure measurements conducted using an impression tray and edentulous oral mucosa analog embedded with pressure sensors. METHODS: In the theoretical model, a hollow tube was mounted onto an impression tray by penetrating through the tray. When force was applied to the tray, pressure was produced which then caused the impression material to flow into the hollow tube. Length of impression material which flowed into tube was denoted as l. In the calculation formula for theoretical model, pressure impulse I was expressed as a function of impression flow length l. For actual pressure measurements, four electric pressure sensors were embedded in an experimental edentulous arch. To visually observe and measure length of impression material flow, four transparent silicon tubes were mounted vertically at different positions on tray. During tray seating, impression material flowed into tubes and pressure which caused material flow movement was measured by the embedded sensor at each tube's position. RESULTS: Based on actual pressure measurements under one experimental condition, regression analysis of pressure data acquired from electric sensors yielded the formula, Y=0.056X²+0.124X. Based on theoretical analysis using a particular viscosity value, the numerical formula yielded was Y=0.057X², which resembled that of the regression formula. SIGNIFICANCE: Theoretical model presented in this paper augured well for clinical application as an easy and economical means to examine magnitude and distribution of impression pressure by measuring lengths of impression material flow in tubes fixed to impression tray.

Levels of the oxidative stress marker γ-glutamyltranspeptidase at different stages of nonalcoholic fatty liver disease.

OBJECTIVES: This study investigated oxidative stress in the liver, by determining hepatic expression and serum levels of γ-glutamyltranspeptidase (GGT) and 8-hydroxy-2'-deoxyguanosine (8-OHdG) in different stages of nonalcoholic fatty liver disease (NAFLD), and assessed whether GGT can differentiate between the various stages of NAFLD. METHODS: Expression of GGT and 8-OHdG was examined in biopsy specimens by immunohistochemistry, and serum GGT and 8-OHdG levels were measured by enzyme-linked immuno sorbent assays in patients with simple fatty liver (n = 10), nonalcoholic steatohepatitis (NASH; n = 10) and, as a control, in alcoholic liver disease (ALD; n = 10). RESULTS: Hepatic tissue expression of GGT and 8-OHdG was seen in ALD, NASH and fatty liver patients. The percentage of hepatocytes positive for 8-OHdG expression and serum 8-OHdG levels was significantly higher in patients with NASH than simple fatty liver. Serum GGT levels were increased in all cases with ALD, NASH and fatty liver, and correlated significantly with serum levels of 8-OHdG in ALD and NASH, but not in simple fatty liver. CONCLUSIONS: Levels of GGT in fatty liver patients may compensate for mild oxidative stress by repressing 8-OHdG levels and preventing progression to NASH; however further oxidative stress leads to increased levels of 8-OHdG and the development of NASH.

Assessment of wastewater-irrigated soil containing heavy metals and establishment of specific biomarkers.

Irrigation with treated wastewater (TWW) is a vital alternative for arid and semi-arid lands but it poses pollution-risk to soil, vegetation and groundwater. Therefore, in the present study, in vitro bioassays were used to evaluate the adverse effects of TWW and irrigated-soil extract sample, on mammalian cells, with respect to heavy metal--Ni, Cd, Pb, Fe, Al-content. The heat shock protein (HSP) 47, E-screen, and transepithelial electrical resistance (TEER) assays served to investigate the stress response of treated-HSP47-transfected Chinese hamster ovary (CHO) cells, the estrogenic activity of the samples in MCF-7 breast cancer cells, and the barrier function (BF) of Caco-2 cells. Furthermore, proteomics analyses were performed to shed light on involved mechanisms and to establish pollution biomarkers. Results showed that the TWW elicited a stress response on HSP cells from 0.1% concentration while soil extract samples exhibited a stress at 1%. TWW induced an estrogenic activity at 10%; up-regulating cell proliferation and tumor-related proteins. Soil extract triggered the enhanced expression of HSP70 family proteins as survival mechanisms against their cytotoxicity toward MCF-7 cells. Moreover, depending on the concentration, 1% of soil extract from 20 cm depth (T20) resulted in a disruption of BF in Caco-2 cells involving cell metabolism, protein synthesis and tumor marker proteins, whereas, 5% of T20 induced the expression of BF-related proteins associated to heat shock, oxidative stress, cell proliferation and glycolytic metabolic pathway. These biological techniques were found to be extremely useful to evaluate the impact of wastewater reuse and to establish specific biomarkers that are common proteins for humans, other mammals and plants. Future studies should focus on exposure quantifications.

Simple spot method of image analysis for evaluation of highly marbled beef.

The simple method of evaluating highly marbled beef was examined by image analysis. The images of the cross section at the 6 to 7th rib were obtained from 82 carcasses of Wagyu cattle. By using an overall trace method, the surrounding edges of the longissimus thoracis and three muscles were traced automatically and manually with image analysis. In a spot method, 3 to 5 locations (2.5 or 3.0 cm in diameter) for each muscle were rapidly selected with no manual trace. The images were flattened, binarized, and the ratio of fat area to muscle area was determined. The correlation coefficients for marbling between different muscles, and between the overall trace and the spot methods were 0.55 to 0.81 between different muscles and 0.89 to 0.97, respectively. These results suggested that the simple spot method is speedy and almost as useful as the overall trace method as a measuring technique for beef marbling in loin muscles, especially for highly marbled beef.

Effect of ursodeoxycholic acid supplementation on growth, carcass characteristics, and meat quality of Wagyu heifers (Japanese Black cattle).

Ursodeoxycholic acid (UDCA), which is used as a hepatic and digestive medicine in humans and domestic animals, was added to the diet of Wagyu beef cattle to investigate its effects on growth, carcass characteristics, and meat quality. The study involved 20 Japanese Black heifers. Animals were divided into the following 2 groups, a control group and a UDCA group (diet supplemented with UDCA), with each group containing 10 animals. The UDCA was administrated at a dose of 2.5 g/(animal/d) to each heifer 24 times over a period of 7 mo in the finishing period. The heifers were slaughtered at 29 mo of age, and carcass characteristics and meat quality were determined. Both the UDCA group and the control group showed similar (P > 0.1) final BW, fattening periods, and daily BW gain. Supplementation of UDCA significantly increased meat quality grade (P < 0.05) and marbling (P < 0.01) and but did not show a significant (P > 0.1) effect on dressing percentage, fat thickness, rib thickness, or ribeye area. The percentage of ether extract in the LM was significantly greater (P < 0.05) in the UDCA group (43.2%) than in the control group (37.8%), whereas the percentage of moisture was significantly less in the former than the latter (P < 0.05).The L* (lightness) values of the muscles were greater (P < 0.05) in the UDCA group than in the control group. No significant differences (P > 0.1) were observed between groups in water-holding capacity, fatty acid composition, and vitamin E content of the LM or in intermuscular fat characteristics. Supplementation of the diet with UDCA can increase marbling without causing growth defects and can improve carcass characteristics in Wagyu cattle.

Identification of the starting point for spermatogenesis resumption in the post-diapause development of the sweet potato hornworm, Agrius convolvuli L.

The resumption of spermatogenesis in post-diapause development was examined in the sweet potato hornworm (Agrius convolvuli) with in vivo bromodeoxyuridine (BrdU) incorporation experiments used to determine the starting point. Diapausing pupae were "overwintered" by chilling at 10 °C for over 4 months, after which they initiated post-diapause development by transferring the pupae to 25 °C with a 12-h light/12-h dark photoperiod. The testes of living, post-diapause pupae were injected with BrdU, which is incorporated into newly synthesized DNA strands. During the first 2 days after diapause termination, the nuclei of spermatogonia and spermatocytes failed to label with BrdU. However, on day 3 of post-diapause pupae (PDP3), labeling studies showed that cell proliferation was initiated by spermatogonia, but not by spermatocytes. In both hemolymph and testes, ecdysteroid concentrations rose gradually, reaching 0.3 µg/ml hemolymph at PDP3. These results led to the following three conclusions. The spermatogonial cell division is highly suppressed during diapause. After a long-term diapause, spermatogenesis resumes in the spermatogonia but not in the spermatocytes of diapause-terminated pupae. Cell division begins in advance of peak ecdysteroid concentrations. The latter result indicates that in post-diapause development, high concentrations of the hormone are not required to initiate spermatogonial proliferation.

Characteristic genotypes of vascular endothelial growth factor are susceptible to ascites in patients with cirrhosis.

This study was designed to investigate whether different vascular endothelial growth factor (VEGF) genotypes are associated with ascites formation in cirrhotic patients. Seventy cirrhotic patients were included in the study: 25 cirrhotic patients with ascites and 45 cirrhotic patients without ascites. Patient characteristics were investigated and compared between the two groups. With regard to VEGF genotype, 42 patients were C/C and 28 patients were T/T or C/T. The genotypes T/T or C/T were observed in 23 cases (51%) among the non-ascites group, but in only five cases (20%) among the ascites group. Serum levels of albumin and creatinine, and the VEGF genotypes were significantly different between the two groups. Multiple regression analysis showed that serum levels of creatinine and the VEGF genotypes were significantly correlated with ascites formation. Thus, it can be concluded that VEGF genotyping might be a valuable susceptibility marker for ascites formation in cirrhotic patients.

Diarylethene microcrystals make directional jumps upon ultraviolet irradiation.

Microcrystals of a diarylethene {1,2-bis[5'-methyl-2'-(2"-pyridyl)thiazolyl]perfluorocyclo-pentene} undergo jumps upon photoirradiation. These photochromic crystals present molecular structural changes upon irradiation with ultraviolet light because of reversible photocyclization reactions. When the energy absorbed by crystals reaches about 10 microJ, the uniaxial stress induced in the crystal lattice relaxes through directional jumps. If one prevents crystals from jumping, then parallel, equidistant cracks appear on crystal surfaces. These photomechanical effects could result from a Grinfeld surface instability.

Effects of a humidity-stabilizing sheet on the color and K value of beef stored at cold temperatures.

The effects of a humidity-stabilizing sheet containing glycerol, on the color and K value of beef stored at cold temperatures were investigated in this study. A drip-absorbing sheet seems to be effective for the preservation of meat quality, while a humidity-stabilizing sheet containing glycerol prevents the increase of metmyoglobin in cold stored beef. Maintaining samples wrapped in humidity-stabilizing sheets containing glycerol at low temperature for 7days was a functional method for conserving the concentration of inosine monophosphate. Beef samples wrapped in sheets containing glycerol had lower K values than samples wrapped in sheets not containing glycerol. When the surface of the meat starts to desiccate, the humidity-stabilizing sheet releases moisture that has been absorbed from the beef in the early stages of storage. Thus, glycerol could potentially play a role as a humidity-stabilizing controller and color preservative. This research suggests that a humidity-stabilizing sheet containing glycerol is a useful moisture controller and prevents deterioration of meat quality, discoloration, and desiccation.

Aberrant regulation of imprinted gene expression in Gtl2lacZ mice.

The imprinted region on mouse distal chromosome 12 covers about 1 Mb and contains at least three paternally expressed genes (Pegs: Peg9/Dlk1, Peg11/Rtl1, and Dio3) and four maternally expressed genes (Megs: Meg3/Gtl2, antiPeg11/antiRlt1, Meg8/Rian, and Meg9/Mirg). Gtl2(lacZ) (Gene trap locus 2) mice have a transgene (TG) insertion 2.3 kb upstream from the Meg3/Gtl2 promoter and show about 40% growth retardation when the TG-inserted allele is paternally derived. Quantitative RT-PCR experiments showed that the expression levels of Pegs in this region were reduced below 50%. These results are consistent with the observed phenotype in Gtl2lacZ mice, because at least two Pegs(Peg9/Dlk1 and Dio3) have growth-promoting effects. The aberrant induction of Megs from silent paternal alleles was also observed in association with changes in the DNA methylation level of a differentially methylated region (DMR) located around Meg3/Gtl2 exon 1. Interestingly, a 60 approximately 80% reduction in all Megs was observed when the TG was maternally derived, although the pups showed no apparent growth or morphological abnormalities. Therefore, the paternal or maternal inheritance of the TG results in the down-regulation in cis of either Pegs or Megs, respectively, suggesting that the TG insertion influences the mechanism regulating the entire imprinted region.

Differential scanning calorimetry of porcine adipose tissues.

Differential scanning calorimetry (DSC) was used for the direct analysis of melting properties in porcine subcutaneous, intermuscular, and kidney leaf adipose tissue by heating at a constant ratio of +5°C/min from 4 to 90°C. Melting curves for adipose tissues as well as fat extracted from the associated tissues by chloroform-methanol were generated using DSC. Major peaks in DSC curves were similar among types of adipose tissue but the temperatures of the melting peak and conclusion point differed among types of adipose tissues. From the visual appearance of fat samples it appeared that the major DSC peak corresponded to phase transition of the fat. The direct DSC analysis of porcine adipose tissues may be useful to determine melting properties.

Genetic parameter estimates of meat quality traits in Duroc pigs selected for average daily gain, longissimus muscle area, backfat thickness, and intramuscular fat content.

Using a multitrait animal model BLUP, selection was conducted over seven generations for growth rate (ADG), real-time ultrasound LM area (LMA), backfat thickness (BF), and intramuscular fat content (IMF) to develop a new line of purebred Duroc pigs with enhanced meat production and meat quality. This selection experiment examined 543 slaughtered pigs (394 barrows and 153 gilts) from the first to the seventh generation for meat quality traits. Further, electric impedance and collagen content of loin meat were measured from the fourth to sixth generation. The present study was intended to estimate genetic parameters of the correlated traits of tenderness (TEND), meat color (pork color standard: PCS; lightness = L*), drip loss (DL), cooking loss (CL), pH (PH), electric impedance (IMP), and collagen (COL) of the LM, and the genetic trends of these traits. Respective heritability estimates for IMF, TEND, DL, CL, PCS, L*, PH, IMP, and COL were 0.39, 0.45, 0.14, 0.09, 0.18, 0.16, 0.07, 0.22, and 0.23. Genetic correlations of IMF with ADG and BF were low and positive, but low and negative with LMA. Tenderness was correlated negatively with ADG (-0.44) and BF (-0.59), but positively correlated with LMA (0.32). The genetic correlation between LMA and DL was positive and high (0.64). The genetic correlations of TEND with IMF and COL were low (-0.09 and 0.26, respectively), but a moderate genetic correlation (0.43) between COL and IMF was estimated, suggesting related increases of IMF and connective tissue. Genetic correlations among meat quality traits suggested that when IMF increases, the water holding capacity improves. Genetic trends of meat quality traits showed increased IMF and lighter meat color.

Evaluation method for firmness and stickiness of porcine perirenal fat.

The firmness and stickiness of chilled porcine fat at 4°C were evaluated with an Instron compression tester and compared with fatty acid composition. Firmness of cylindrical adipose samples was measured at a force producing a 70% deformation. Firmness values were correlated with refractive index data (r=-0.67), melting point data (r=0.77), and saturated fatty acids concentration data (r=0.72) of the extracted lipid, and with sensory scores data (r=0.89). The firmness value correlated with the concentration of C18:0 (r=0.73). The stickiness of comminuted fat samples was evaluated with the Instron using a fixed load at a compression force of 20N and crosshead speed of 1.5mm/s. Single regression analyses showed that the stickiness parameters, stretch and adhesiveness correlated negatively with the concentration of the saturated fatty acids data (r=-0.64, -0.52) but positively and weakly with the monounsaturated fatty acids data (r=0.28, 0.34). Multiple regression analysis improved their relationships. These results indicate that mechanical evaluation may be used to predict porcine fat texture and saturated fatty acids concentration.

Immediate performance of self-etching versus system adhesives with multiple light-activated restoratives.

OBJECTIVES: The purpose of this study was to evaluate the performance of both single and double applications of (Adper Prompt L-Pop) self-etching dental adhesive, when used with three classes of light-activated restorative materials, in comparison to the performance of each restorative system adhesive. Evaluation parameters to be considered for the adhesive systems were (a) immediate marginal adaptation (or gap formation) in tooth cavities, (b) free setting shrinkage-strain determined by the immediate marginal gap-width in a non-bonding Teflon cavity, and (c) their immediate shear bond-strengths to enamel and to dentin. METHODS: The maximum marginal gap-width and the opposing-width (if any) in the tooth cavities and in the Teflon cavities were measured immediately (3 min) after light-activation. The shear bond-strengths to enamel and to dentin were also measured at 3 min. RESULTS: For light-activated restorative materials during early setting (<3 min), application of Adper Prompt L-Pop exhibited generally superior marginal adaptation to most system adhesives. But there was no additional benefit from double application. The marginal-gaps in tooth cavities and the marginal-gaps in Teflon cavities were highly correlated (r = 0.86-0.89, p < 0.02-0.01). For enamel and dentin shear bond-strengths, there were no significant differences between single and double applications, for all materials tested except Toughwell and Z 250 with enamel. SIGNIFICANCE: Single application of a self-etch adhesive was a feasible and beneficial alternative to system adhesives for several classes of restorative. Marginal gap-widths in tooth cavities correlated more strongly with free shrinkage-strain magnitudes than with bond-strengths to tooth structure.

Marginal and flexural integrity of three classes of luting cement, with early finishing and water storage.

OBJECTIVES: The aims of this investigation were to clarify the effects of finishing-time and 24 h water-storage on mechanical properties and marginal adaptation to dentin of seven modern luting cements, representing three chemical types. METHODS: Bistite II, Chemiace II, Compolute, XenoCem, PermaCem, Fuji Cem and Fuji Plus were investigated with specimen sub-groups (N=10) for each property measured. The principal series of experiments was conducted in dentin cavities with interfacial polishing either immediately (3 min) after setting or after 24 h water-storage. After the finishing procedure, the maximum marginal gap width and the opposing width (if any) per cavity were measured microscopically, and summed. Then the overall sum of gap-widths (per group; N=10) was calculated. Marginal gaps were similarly measured in Teflon cavities, together with shear-bond-strengths to dentin and early flexural strengths, moduli and swelling data. RESULTS: For specimen-sets polished immediately after setting, summed marginal gaps of 23-121 microm were observed, for all luting cements except Compolute. A significantly different (p<0.05) result of either no gap or 6-28 microm summed gap-widths occurred in specimens polished after 24 h. For all materials, their shear-bond-strengths, flexural strength and moduli significantly increased after 24 h storage. SIGNIFICANCE: The marginal behavior can be interpreted in terms of the contributions of bonding, shrinkage, swelling and compliance of components, along with compositional features of the cements. With these types of cement it is generally inadvisable to polish the interfacial luting surface immediately after cementing. The polishing procedures should be carried out not less than 24 h later. One resin-cement was able to withstand immediate finishing.