Gel-Gel Phase Separation in Clustered Poly(ethylene glycol) Hydrogel with Enhanced Hydrophobicity.

The development of hydrophobic poly(ethylene glycol) (PEG) hydrogels, which are typically hydrophilic, could significantly enhance their application as artificial extracellular matrices. In this study, we designed PEG hydrogels with enhanced hydrophobicity through gel-gel phase separation (GGPS), a phenomenon that uniquely enhances hydrophobicity under ambient conditions, and we elucidated the pivotal role of elasticity in this process. We hypothesized that increased elasticity would amplify GGPS, thereby improving the hydrophobicity and cell adhesion on PEG hydrogel surfaces, despite their inherent hydrophilicity. To test this hypothesis, we engineered dilute oligo-PEG gels via a two-step process, creating polymer networks from tetra-PEG clusters with multiple reaction points. These oligo-PEG gels exhibited significantly higher elasticity, turbidity, and shrinkage upon water immersion compared to dilute PEG gels. Detailed characterization through confocal laser scanning microscopy, rheological measurements, and cell adhesion assays revealed distinct biphasic structures, increased hydrophobicity, and enhanced cell attachability in the dilute oligo-PEG gels. Our findings confirm that elasticity is crucial for effective GGPS, providing a novel method for tailoring hydrogel properties without chemical modification. This research introduces a new paradigm for designing biomaterials with improved cell-scaffolding capabilities, offering significant potential for tissue engineering and regenerative medicine.

Enhancing cell adhesion in synthetic hydrogels via physical confinement of peptide-functionalized polymer clusters.

Artificially synthesized poly(ethylene glycol) (PEG)-based hydrogels are extensively utilized as biomaterials for tissue scaffolds and cell culture matrices due to their non-protein adsorbing properties. Although these hydrogels are inherently non-cell-adhesive, advancements in modifying polymer networks with functional peptides have led to PEG hydrogels with diverse functionalities, such as cell adhesion and angiogenesis. However, traditional methods of incorporating additives into hydrogel networks often result in the capping of crosslinking points with heterogeneous substances, potentially impairing mechanical properties and obscuring the causal relationships of biological functions. This study introduces polymer additives designed to resist prolonged elution from hydrogels, providing a novel approach to facilitate cell culture on non-adhesive surfaces. By clustering tetra-branched PEG to form ultra-high molecular weight hyper-branched structures and functionalizing their termini with cell-adhesive peptides, we successfully entrapped these clusters within the hydrogel matrix without compromising mechanical strength. This method has enabled successful cell culture on inherently non-adhesive PEG hydrogel surfaces at high peptide densities, a feat challenging to achieve with conventional means. The approach proposed in this study not only paves the way for new possibilities with polymer additives but also serves as a new design paradigm for cell culturing on non-cell-adhesive hydrogels.

Preclustering Gelatin for Faster-Forming Injectable Hydrogels: A Strategy for Fabricating 3D Hydrogel Scaffolds with Improved Cell Dispersion.

Gelatin-based injectable hydrogels capable of encapsulating cells are pivotal in tissue engineering because they can conform to any geometry and exhibit physical properties similar to those of living tissues. However, the slow gelation process observed in these cell-encapsulating hydrogels often causes an uneven dispersion of cells. This study proposes an approach for achieving fast gelation of unmodified gelatin under physiological conditions through gelatin preclustering. By using tetrafunctional succinimidyl-terminated poly(ethylene glycol) as a clustering agent, the gelation process is successfully expedited fivefold without requiring chemical modifications, effectively addressing the associated challenges of uneven cell distribution.

Injectable phase-separated tetra-armed poly(ethylene glycol) hydrogel scaffold allows sustained release of growth factors to enhance the repair of critical bone defects.

With the rising prevalence of bone-related injuries, it is crucial to improve treatments for fractures and defects. Tissue engineering offers a promising solution in the form of injectable hydrogel scaffolds that can sustain the release of growth factors like bone morphogenetic protein-2 (BMP-2) for bone repair. Recently, we discovered that tetra-PEG hydrogels (Tetra gels) undergo gel-gel phase separation (GGPS) at low polymer content, resulting in hydrophobicity and tissue affinity. In this work, we examined the potential of a newer class of gel, the oligo-tetra-PEG gel (Oligo gel), as a growth factor-releasing scaffold. We investigated the extent of GGPS occurring in the two gels and assessed their ability to sustain BMP-2 release and osteogenic potential in a mouse calvarial defect model. The Oligo gel underwent a greater degree of GGPS than the Tetra gel, exhibiting higher turbidity, hydrophobicity, and pore formation. The Oligo gel demonstrated sustained protein or growth factor release over a 21-day period from protein release kinetics and osteogenic cell differentiation studies. Finally, BMP-2-loaded Oligo gels achieved complete regeneration of critical-sized calvarial defects within 28 days, significantly outperforming Tetra gels. The easy formulation, injectability, and capacity for sustained release makes the Oligo gel a promising candidate therapeutic biomaterial.

One-Pot Approach to Synthesize Tough and Cell Adhesive Double-Network Hydrogels Consisting of Fully Synthetic Materials of Self-Assembling Peptide and Poly(ethylene glycol).

Hydrogels with a double network (DN) structure are compelling biomaterials, holding potential for use as artificial extracellular matrices. Generally, the DN approach imparts hydrogels with high mechanical strength and cell-adhesive properties. However, achieving this often demands a complex multistep process involving potentially hazardous free-radical polymerization, which can result in toxicity. This limits their broad biological applications. In this work, we introduce a straightforward yet biocompatible method to fabricate tough and cell-adhesive DN hydrogels using entirely synthetic materials: the self-assembling peptide (RADA16) and poly(ethylene glycol) (PEG). An in situ mixing of these components leads to the sequential formation of DN hydrogels─first through the self-assembly of the RADA16 peptide and then via chemical cross-linking between PEG molecules. Hydrogels produced this way exhibited up to a 10-fold increase in fracture energy, and cells seeded on their surfaces showcased good attachment. Our design underscores the efficacy of the DN approach and the promising applications of peptides in tissue engineering.

Percolation-induced gel-gel phase separation in a dilute polymer network.

Cosmic large-scale structures, animal flocks and living tissues can be considered non-equilibrium organized systems created by dissipative processes. Replicating such properties in artificial systems is still difficult. Herein we report a dissipative network formation process in a dilute polymer-water mixture that leads to percolation-induced gel-gel phase separation. The dilute system, which forms a monophase structure at the percolation threshold, spontaneously separates into two co-continuous gel phases with a submillimetre scale (a dilute-percolated gel) during the deswelling process after the completion of the gelation reaction. The dilute-percolated gel, which contains 99% water, exhibits unexpected hydrophobicity and induces the development of adipose-like tissues in subcutaneous tissues. These findings support the development of dissipative structures with advanced functionalities for distinct applications, ranging from physical chemistry to tissue engineering.

Tissue-Adhesive Hydrogel Spray System for Live Cell Immobilization on Biological Surfaces.

Gelatin hydrogels are used as three-dimensional cell scaffolds and can be prepared using various methods. One widely accepted approach involves crosslinking gelatin amino groups with poly(ethylene glycol) (PEG) modified with N-hydroxysuccinimide ester (PEG-NHS). This method enables the encapsulation of live cells within the hydrogels and also facilitates the adhesion of the hydrogel to biological tissues by crosslinking their surface amino groups. Consequently, these hydrogels are valuable tools for immobilizing cells that secrete beneficial substances in vivo. However, the application of gelatin hydrogels is limited due to the requirement for several minutes to solidify under conditions of neutral pH and polymer concentrations suitable for live cells. This limitation makes it impractical for use with biological tissues, which have complex shapes or inclined surfaces, restricting its application to semi-closed spaces. In this study, we propose a tissue-adhesive hydrogel that can be sprayed and immobilized with live cells on biological tissue surfaces. This hydrogel system combines two components: (1) gelatin/PEG-NHS hydrogels and (2) instantaneously solidifying PEG hydrogels. The sprayed hydrogel solidified within 5 s after dispensing while maintaining the adhesive properties of the PEG-NHS component. The resulting hydrogels exhibited protein permeability, and the viability of encapsulated human mesenchymal stem/stromal cells (hMSCs) remained above 90% for at least 7 days. This developed hydrogel system represents a promising approach for immobilizing live cells on tissue surfaces with complex shapes.

In situ-formable, dynamic crosslinked poly(ethylene glycol) carrier for localized adeno-associated virus infection and reduced off-target effects.

The adeno-associated virus (AAV) is a potent vector for in vivo gene transduction and local therapeutic applications of AAVs, such as for skin ulcers, are expected. Localization of gene expression is important for the safety and efficiency of genetic therapies. We hypothesized that gene expression could be localized by designing biomaterials using poly(ethylene glycol) (PEG) as a carrier. Here we show one of the designed PEG carriers effectively localized gene expression on the ulcer surface and reduced off-target effects in the deep skin layer and the liver, as a representative organ to assess distant off-target effects, using a mouse skin ulcer model. The dissolution dynamics resulted in localization of the AAV gene transduction. The designed PEG carrier may be useful for in vivo gene therapies using AAVs, especially for localized expression.

Three-dimensional co-culture model employing silica nonwoven fabrics to enhance cell-to-cell communication of paracrine signaling between hepatocytes and fibroblasts.

The realization that soluble factors secreted by heterotypic cells play an importanta role in paracrine signaling, which facilitates intercellular communication, enabled the development of physiologically relevant co-culture models for drug screening and the engineering of tissues, such as hepatic tissues. The most crucial issues confronting the use of conventional membrane inserts in segregated co-culture models that are used to study paracrine signaling between heterotypic cells have been identified as long-term viability and retention of cell-specific functions, especially when isolated primary cells are used. Herein, we present an in vitro segregated co-culture model consisting of a well plate incubated with rat primary hepatocytes and normal human dermal fibroblasts which were segregated using a membrane insert with silica nonwoven fabric (SNF) on it. SNF, which mimics a physiological environment much more effectively than a two-dimensional (2D) one, promotes cell differentiation and resultant paracrine signaling in a manner that is not possible in a conventional 2D culture, owing to high mechanical strength generated by its inorganic materials and interconnected network structure. In segregated co-cultures, SNF clearly enhanced the functions of hepatocytes and fibroblasts, thereby showing its potential as a measure of paracrine signaling. These results may advance the understanding of the role played by paracrine signaling in cell-to-cell communication and provide novel insights into the applications of drug metabolism, tissue repair, and regeneration.

Miscibility and ternary diagram of aqueous polyvinyl alcohols with different degrees of saponification.

Liquid-liquid phase separation (LLPS), an important phenomenon in the field of polymer science and material design, plays an essential role in cells and living bodies. Poly(vinyl alcohol) (PVA) is a popular semicrystalline polymer utilized in the synthesis of artificial biomaterials. The aqueous solutions of its derivatives with tuned degrees of saponification (DS) exhibit LLPS. However, the miscibility and LLPS behavior of PVA aqueous solution are still unclear. This study describes the miscibility diagram of the ternary mixture, where water and two types of poly(vinyl alcohol) (PVA) with different DSs [98 (PVA98), 88 (PVA88), 82 (PVA82), and 74 mol% (PVA74)] were blended. UV-Vis measurement was conducted to evaluate the miscibility. Immiscibility was more pronounced at elevated temperatures, exhibiting LLPS. The ternary immiscibility diagram, displaying miscible-immiscible behaviors in the aqueous mixtures of PVA74:PVA98, PVA82:PVA98, and PVA88:PVA98 (blended at a constant volume ratio), indicated that increasing the concentration, temperature, and blend ratio of PVAs at a lower DS increased immiscibility, suggesting that the free energy of mixing increases with increasing these parameters. The miscible-immiscible behaviors of PVAs/water systems provide fundamental knowledge about LLPS and the design of PVA-based materials.

Molecular Weight-Dependent Diffusion, Biodistribution, and Clearance Behavior of Tetra-Armed Poly(ethylene glycol) Subcutaneously Injected into the Back of Mice.

Four-armed poly(ethylene glycol) (PEG)s are essential hydrophilic polymers extensively utilized to prepare PEG hydrogels, which are valuable tissue scaffolds. When hydrogels are used in vivo, they eventually dissociate due to cleavage of the backbone structure. When the cleavage occurs at the cross-linking point, the hydrogel elutes as an original polymer unit, i.e., four-armed PEG. Although four-armed PEGs have been utilized as subcutaneously implanted biomaterials, the diffusion, biodistribution, and clearance behavior of four-armed PEG from the skin are not fully understood. This paper investigates time-wise diffusion from the skin, biodistribution to distant organs, and clearance of fluorescence-labeled four-armed PEGs with molecular weight (Mw) ranging from 5-40 kg/mol subcutaneously injected into the back of mice. Changes over time indicated that the fate of subcutaneously injected PEGs is Mw-dependent. Four-armed PEGs with Mw ≤ 10 kg/mol gradually diffused to deep adipose tissue beneath the injection site and distributed dominantly to distant organs, such as the kidney. PEGs with Mw ≥ 20 kg/mol stagnated in the skin and deep adipose tissue and were mainly delivered to the heart, lung, and liver. The fundamental understanding of the Mw-dependent behavior of four-armed PEGs is beneficial for preparing biomaterials using PEGs, providing a reference in the field of tissue engineering.

Decoupling between Translational Diffusion and Viscoelasticity in Transient Networks with Controlled Network Connectivity.

The mobility of sustained molecules is influenced by viscoelasticity, which is strongly correlated with the diffusional property in polymeric liquid. However, the study of transient networks formed by a reversible crosslink, which is the viscoelastic liquid, was insufficient due to the absence of a model system. We compare the viscoelastic and diffusional properties of the transient networks, using the model system with controlled network connectivity (Tetra-PEG slime). According to independent measurements of viscoelasticity and diffusion, the root-mean-square distance the polymer diffuses during the viscoelastic relaxation time shows a large deviation from the self-size of the polymer, which is contrary to the conventional understanding. This decoupling between viscoelasticity and diffusion is unique for transient networks, suggesting that the viscoelastic relaxation is not induced by the diffusion of one prepolymer, particularly in the network with low connectivity. These findings will provide a definite basis for discussion to understand the viscoelasticity in transient networks.

Simple Preparation of Injectable Hydrogels with Phase-Separated Structures That Can Encapsulate Live Cells.

Injectable hydrogels are biomaterials that can be administered minimally invasively in liquid form and are considered promising artificial extracellular matrix (ECM) materials. However, ordinary injectable hydrogels are synthesized from water-soluble molecules to ensure injectability, resulting in non-phase-separated structures, making them structurally different from natural ECMs with phase-separated insoluble structural proteins, such as collagen and elastin. Here, we propose a simple material design approach to impart phase-separated structures to injectable hydrogels by adding inorganic salts. Injecting a gelling solution of mutually cross-linkable tetra-arm poly(ethylene glycol)s with potassium sulfate at optimal concentrations results in the formation of a hydrogel with phase-separated structures in situ. These phase-separated structures provide up to an 8-fold increase in fracture toughness while allowing the encapsulation of live mouse chondrogenic cells without compromising their proliferative activity. Our findings highlight that the concentration of inorganic salts is an important design parameter in injectable hydrogels for artificial ECMs.

Universal Screening for Familial Hypercholesterolemia in Children in Kagawa, Japan.

AIM: Familial hypercholesterolemia (FH) is an underdiagnosed autosomal dominant genetic disorder characterized by high levels of plasma low-density lipoprotein cholesterol (LDL-C) from birth. This study aimed to assess the genetic identification of FH in children with high LDL-C levels who are identified in a universal pediatric FH screening in Kagawa, Japan. METHOD: In 2018 and 2019, 15,665 children aged 9 or 10 years underwent the universal lipid screening as part of the annual health checkups for the prevention of lifestyle-related diseases in the Kagawa prefecture. After excluding secondary hyper-LDL cholesterolemia at the local medical institutions, 67 children with LDL-C levels of ≥ 140 mg/dL underwent genetic testing to detect FH causative mutations at four designated hospitals. RESULTS: The LDL-C levels of 140 and 180 mg/dL in 15,665 children corresponded to the 96.3 and 99.7 percentile values, respectively. Among 67 children who underwent genetic testing, 41 had FH causative mutations (36 in the LDL-receptor, 4 in proprotein convertase subtilisin/kexin type 9, and 1 in apolipoprotein B). The area under the curve of receiver operating characteristic curve predicting the presence of FH causative mutation by LDL-C level was 0.705, and FH causative mutations were found in all children with LDL-C levels of ≥ 250 mg/dL. CONCLUSION: FH causative mutations were confirmed in almost 60% of the referred children, who were identified through the combination of the lipid universal screening as a part of the health checkup system and the exclusion of secondary hyper-LDL cholesterolemia at the local medical institutions.

On-demand retrieval of cells three-dimensionally seeded in injectable thioester-based hydrogels.

Scaffold systems that can easily encapsulate cells and safely retrieve them at the desired time are important for the advancement of cell-based medicine. In this study, we designed and fabricated thioester-based poly(ethylene glycol) (PEG) hydrogels with injectability and on-demand degradability as new scaffold materials for cells. Hydrogels can be formed in situ within minutes via thioester cross-linking between PEG molecules and can be degraded under mild conditions in response to l-cysteine molecules through thiol exchange occurring at the thioester linkage. Various cell experiments, especially with sucrose, which enables the adjustment of the osmotic pressure around the cells, showed that the damage to the cells during encapsulation and degradation was minimal, indicating the capability of on-demand retrieval of intact cells. This hydrogel system is a versatile tool in the field of cell-based research and applications such as tissue regeneration and regenerative medicine.

Development of a Novel Algorithm to Detect Atrial Fibrillation Using an Automated Blood Pressure Monitor With an Irregular Heartbeat Detector.

BACKGROUND: Atrial fibrillation (AF), which contributes to an increased risk of stroke, frequently remains undetected, suggesting an unmet need for easier and more reliable AF screening. The reports on screening AF using an Omron blood pressure (BP) monitor with an irregular heartbeat (IHB) detector show inconsistent results, so the aim of this study was to develop a novel algorithm to accurately diagnose AF with 3 BP measurements using an Omron automated BP monitor with IHB detector.Methods and Results:In total, 303 general cardiac patients were included. Real-time single-lead ECG revealed AF in 44 patients. BP measurement was performed 3 times per patient using the Omron BP monitor HEM-907, and the number of IHBs detected was recorded. Based on these data, we developed the following algorithm: ≥1 IHB is detected during at least 2 of 3 BP measurements and the maximum number of IHBs detected is ≥2. Using this algorithm, we achieved a sensitivity of 95.5% and specificity of 96.5%, for diagnosing AF. CONCLUSIONS: The novel algorithm with 3 BP measurements using the Omron automated BP monitor with IHB detector showed high sensitivity and specificity for diagnosing AF in general cardiac patients.

Improvement of Hepatic Functions by Spheroids Coculture with Fibroblasts in 3D Silica Nonwoven Fabrics.

In order to realize organ-on-a-chip as an effective tool for regenerative medicine and drug development, tissue-mimic cell culture methods which promote liver-specific function for long period have been developed. We have previously demonstrated that coculture of hepatocyte spheroids on fibroblasts using micropatterned substrate improved the hepatic functions due to the heterotypic cell-cell interactions and paracrine signaling from each other. In addition, hepatocyte function cultured as monolayer was also promoted in separately coculture with fibroblasts cultured as monolayer, and it is more improved in separately coculture with fibroblasts in 3D silica nonwoven fabrics. In this study, separately coculture of hepatocyte spheroids with fibroblasts cultured on 3D silica nonwoven fabrics was estimated for further improvement of hepatocyte functions. The hepatic function cocultured with fibroblast was more promoted than mono spheroids culture. The functional enhancement was significantly most improved in separately coculture with fibroblast in 3D silica nonwoven fabrics. Thus, these results were suggested that 3D culture of fibroblasts in 3D silica nonwoven fabrics increased the heterotypic secretion of paracrine factors, and it is essential for improved hepatic performance.

N-Hydroxysuccinimide Bifunctionalized Triblock Cross-Linker Having Hydrolysis Property for a Biodegradable and Injectable Hydrogel System.

The design of biocompatible, degradable, and injectable hydrogel has been attractive for achievement of safe and efficient tissue engineering. Herein, we designed a N-hydroxysuccinimide (NHS) ester-terminated ABA triblock copolymer composed of poly(ethylene glycol) (PEG) as hydrophilic A segments and poly(dl-lactide) (PLA) as B segment having hydrolysis property (NHS-PEG-b-PLA-b-PEG-NHS) to be a cross-linker of polymer segments having amine groups for facile construction of injectable and degradable hydrogel. The PLA domain, which is widely accepted hydrolyzable segments, is inherently hydrophobic and simple introduction of the NHS group on the ends of PLA would not have high reactivity in aqueous milieu to construct injectable hydrogel. Thus, in this design, hydrophilic PEG was introduced as A segments to increase the reactivity of NHS groups at the ends of linkers by increasing the mobility. To demonstrate the property as a cross-linker for constructing degradable and injectable hydrogel, carboxylmethyl chitosan (CH), which is a polymer segment having amine groups, and NHS-PEG-b-PLA-b-PEG-NHS solutions were mixed to form the hydrogel (CH/PEG-PLA-PEG) under physiological condition. The formation of CH/PEG-PLA-PEG hydrogel proceeded within minute-order period after mixing the solutions, suggesting NHS-PEG-b-PLA-b-PEG-NHS is applicable to the cross-linker for construction of injectable hydrogel system with time-dependent gelation property. Degradation of the obtained CH/PEG-PLA-PEG hydrogel was observed, whereas that of CH/PEG, which was prepared from NHS-PEG-NHS and CH, was not observed, appealing the degradation property of the CH/PEG-PLA-PEG hydrogel based on hydrolysis of the PLA domain. Furthermore, chondrocytes embedded in CH/PEG-PLA-PEG hydrogels promoted collagen synthesis compared to CH/PEG. These demonstrations indicate the designed NHS-PEG-b-PLA-b-PEG-NHS is a promising cross-linker to construct the injectable and degradable hydrogel and eventually promote hydrogel performance as a tissue regeneration scaffold.

Preparation of Cell-Paved and -Incorporated Polysaccharide Hollow Fibers Using a Microfluidic Device.

Cellular constructs having hollow tubular structures are expected to be used as artificial blood vessels. We have recently demonstrated that water-insoluble polyion complexes (PICs) were formed from water-soluble polysaccharides with opposite charges at the interface of coaxial flows, which resulted in the formation of hollow fibers. In this study, both inside- and outside-cell-laden chondroitin sulfate C (CS)/chitosan (CHI) hollow fibers were prepared by utilizing a microfluidic device and modification with cell adhesive molecules. Loading of type I collagen (COL) and surface modification with fibronectin and gelatin using layer-by-layer assembly techniques improved the adhesion and spreading of fibroblast cells to/on the surface of CS/CHI hollow fibers. On the other hand, by suspending mesenchymal stem cells (MSCs) in the core flow solution, cells were successfully loaded in the walls of the hollow fibers. As the culture time extended, cells trapped in the PIC structures constituting the wall of the hollow fibers migrated to the interface between the hollow fibers and the medium: cells adhered to and stretched "on" the lumen surfaces in the COL-loaded fibers. In contrast, for the case of unmodified hollow fibers, it was difficult for cells to adhere to the lumen surfaces. Therefore, cell aggregates were formed "in" the lumen. Results of the live/dead assay and MTT assay clearly demonstrated that MSCs possessed certain levels of cell viability and proliferated for up to 10 days, especially for the cases of COL-loaded hollow fibers. On the basis of these results, the utility of the present hollow fibers in the formation of cellular constructs corresponding to blood vessels is also discussed.

Osteogenic Differentiation of Bone Marrow-Derived Mesenchymal Stem Cells in Electrospun Silica Nonwoven Fabrics.

Silica nonwoven fabrics (SNFs) with enough mechanical strength are candidates as implantable scaffolds. Culture of cells therein is expected to affect the proliferation and differentiation of the cells through cell-cell and cell-SNF interactions. In this study, we examined three-dimensional (3D) SNFs as a scaffold of mesenchymal stem cells (MSCs) for bone tissue engineering applications. The interconnected highly porous microstructure of 3D SNFs is expected to allow omnidirectional cell-cell interactions, and the morphological similarity of a silica nanofiber to that of a fibrous extracellular matrix can contribute to the promotion of cell functions. 3D SNFs were prepared by the sol-gel process, and their mechanical properties were characterized by the compression test and rheological analysis. In the compression test, SNFs showed a compressive elastic modulus of over 1 MPa and a compressive strength of about 200 kPa. These values are higher than those of porous polystyrene disks used for in vitro 3D cell culture. In rheological analysis, the elastic modulus and fracture stress were 3.27 ± 0.54 kPa and 25.9 ± 8.3 Pa, respectively. Then, human bone marrow-derived MSCs were cultured on SNFs, and the effects on proliferation and osteogenic differentiation were evaluated. The MSCs seeded on SNF proliferated, and the thickness of the cell layer became over 80 µm after 14 days of culture. The osteogenic differentiation of MSCs on SNFs was induced by the culture in the commercial osteogenic differentiation medium. The alkaline phosphatase activity of MSCs on SNFs increased rapidly and remained high up to 14 days and was much higher than that on two-dimensional tissue culture-treated polystyrene. The high expression of RUNX2 and intense staining by alizarin red s after differentiation supported that SNFs enhanced the osteogenic differentiation of MSCs. Furthermore, permeation analysis of SNFs using fluorescein isothiocyanate-dextran suggested a sufficient permeability of SNFs for oxygen, minerals, nutrients, and secretions, which is important for maintaining the cell viability and vitality. These results suggested that SNFs are promising scaffolds for the regeneration of bone defects using MSCs, originated from highly porous and elastic SNF characters.