Palladium-Functionalized Polysiloxane Drop-Casted on Carbon Paper as a Heterogeneous Catalyst for the Suzuki-Miyaura Reaction.

In this work, a Pd(II)-C,N-cyclometalated complex was grafted to polysiloxanes via azide-alkyne cycloaddition. The obtained polymer-metal complex (Pd-PDMS) acts as a catalyst in the Suzuki-Miyaura reaction. Pd-PDMS was drop-casted onto a carbon fiber support, and the resulting membrane demonstrated catalytic activity in the cross-coupling reaction without yield loss after several catalytic cycles. The catalytic membrane allows for easy catalyst recycling and provides ultra-low palladium levels in Suzuki-Miyaura reaction products.

When a Side Reaction Is a Benefit: A Catalyst-Free Route to Obtain High-Molecular Cobaltocenium-Functionalized Polysiloxanes by Hydroamination.

Cobaltocenium-containing (co)polysiloxanes (Cc-PDMSs) with terminal and side groups were synthesized by the reaction of catalyst-free hydroamination between ethynylcobaltocenium hexafluorophosphate and polysiloxanes comprising amino moieties as terminal and side groups. The conversion of NH2 groups in the polymers reaches 85%. The obtained (co)polysiloxanes "gelate" due to an increase in their molecular weight by approx. 30 times, when stored at room temperature over one week. "Gelated" Cc-PDMSs remain soluble in most polar solvents. The structure of Cc-PDMSs and the mechanism of "gelation" were established by 1H, 13C{1H}, 29Si{1H}, 19F{1H}, 31P{1H} nuclear magnetic resonance, infrared, ultraviolet-visible, and X-ray photoelectron spectroscopies. As determined by cyclic voltammetry, Cc-PDMSs possess redox properties (CoII/CoIII transitions at E1/2 = -1.8 and -1.3 V before and after "gelation", respectively). This synthetic approach allows to increase the molecular weights of the synthesized polysiloxanes functionalized with cobaltocenium groups easily, leading to their higher film-forming ability, which is desirable for some electronic applications. Cc-PDMSs can be utilized as redox-active polymer films in modified electrodes, electrochromic devices, redox-active coatings, and components for batteries.

UV-A Flexible LEDs Based on Core-Shell GaN/AlGaN Quantum Well Microwires.

Nanostructured ultraviolet (UV) light sources represent a growing research field in view of their potential applications in wearable optoelectronics or medical treatment devices. In this work, we report the demonstration of the first flexible UV-A light emitting diode (LED) based on AlGaN/GaN core-shell microwires. The device is based on a composite microwire/poly(dimethylsiloxane) (PDMS) membrane with flexible transparent electrodes. The electrode transparency in the UV range is optimized: namely, we demonstrate that single-walled carbon nanotube electrodes provide a stable electrical contact to the membrane with high transparency (70% at 350 nm). The flexible UV-A membrane demonstrating electroluminescence around 345 nm is further applied to excite Zn-Ir-BipyPDMS luminophores: the UV-A LED is combined with the elastic luminophore-containing membrane to produce a visible amber emission from 520 to 650 nm. The obtained results pave the way for flexible inorganic light-emitting diodes to be employed in sensing, detection of fluorescent labels, or light therapy.

Iridium(III)-Incorporating Self-Healing Polysiloxanes as Materials for Light-Emitting Oxygen Sensors.

Polymer-metal complexes (PMCs) based on poly(2,2'-bipyridine-4,4'-dicarboxamide-co-polydimethylsiloxanes) with cyclometalated di(2-phenylpyridinato-C2,N')iridium(III) fragments and cross-linked by Zn2+ (Zn[Ir]-BipyPDMSs) or Ir3+ (Ir[Ir]-BipyPDMSs) represent flexible, stretchable, phosphorescent, and self-healing molecular oxygen sensors. PMCs provide strong phosphorescence at λem = 595-605 nm. Zn[Ir]-BipyPDMS with PDMS chain length of Mn = 5000 has the highest quantum yield of 9.3% and is a molecular oxygen sensor at different O2 concentrations (0-100 vol%) compared to Ir[Ir]-BipyPDMSs. A Stern-Volmer constant is determined for Zn[Ir]-BipyPDMS as KSV = 0.014%-1, which is similar to the reported oxygen-sensitive iridium(III) complexes. All synthesized PMCs exhibit high elongation at break (up to 1100%) and self-healing efficiency (up to 99%).

Ligand Exchange Reaction between Ferrocene and Multiwalled Carbon Nanotubes: A Contemporary Approach.

Ligand exchange reaction (LER) between carbon nanoparticles and ferrocene (Cp2Fe) was conducted several times, but there was no convincing evidence of half-sandwich CpFe+ coordination to multiwalled carbon nanotubes (MWCNT). In this study, MWCNT is modified by LER with ferrocene using AlCl3/Al as a catalytic system. The modified MWCNT (Fc-MWCNT) are investigated for better understanding of the processes taking place on the surface of MWCNT using different spectroscopic and electrochemical methods. The formation of the Fe-C covalent bond between CpFe+ and MWCNT is confirmed by changes in the Raman spectrum of Fc-MWCNT compared to pristine MWCNT. The densest structure of Fc-MWCNT is investigated by transmission electronic microscopy. According to density-functional theory calculations of the model interaction between Fe and coronene, the Fe-C bond length is 2.1687-2.1855 Å. X-ray photoelectron spectroscopy also confirms the coordination of the Fe atom to MWCNT by analysis of oxidation states of Fe 2p and deconvolution of C 1s. Utilization of cyclic voltammetry corroborated MWCNT modification via LER. These data are important for both theoretical and practical applications due to increased interest in LER-modified compounds in different areas including thermoelectric devices, sensors, and its potential application in the field of molecular machine construction.

Self-Healing Silicone Materials: Looking Back and Moving Forward.

This review is dedicated to self-healing silicone materials, which can partially or entirely restore their original characteristics after mechanical or electrical damage is caused to them, such as formed (micro)cracks, scratches, and cuts. The concept of self-healing materials originated from biomaterials (living tissues) capable of self-healing and regeneration of their functions (plants, human skin and bones, etc.). Silicones are ones of the most promising polymer matrixes to create self-healing materials. Self-healing silicones allow an increase of the service life and durability of materials and devices based on them. In this review, we provide a critical analysis of the current existing types of self-healing silicone materials and their functional properties, which can be used in biomedicine, optoelectronics, nanotechnology, additive manufacturing, soft robotics, skin-inspired electronics, protection of surfaces, etc.

Platinum macrocatalyst for heterogeneous Si-O dehydrocoupling.

A platinum polymer catalyst (Pt-PDMS) was synthesized by immobilization of a platinum catalytic complex in a polysiloxane chain using an azide-alkyne CuAAC cycloaddition. Insoluble Pt-PDMS can be used as an effective heterogeneous macrocatalyst for Si-O dehydrocoupling. Pt-PDMS is easy to recover, purify, and reuse again for heterogeneous catalysis.

Silicone Materials for Flexible Optoelectronic Devices.

Polysiloxanes and materials based on them (silicone materials) are of great interest in optoelectronics due to their high flexibility, good film-forming ability, and optical transparency. According to the literature, polysiloxanes are suggested to be very promising in the field of optoelectronics and could be employed in the composition of liquid crystal devices, computer memory drives organic light emitting diodes (OLED), and organic photovoltaic devices, including dye synthesized solar cells (DSSC). Polysiloxanes are also a promising material for novel optoectronic devices, such as LEDs based on arrays of III-V nanowires (NWs). In this review, we analyze the currently existing types of silicone materials and their main properties, which are used in optoelectronic device development.

Structural Features of Eu3+ and Tb3+-Bipyridinedicarboxamide Complexes.

Photoluminescent lanthanide complexes of Eu3+ and Tb3+ as central atoms and N6,N6'-diisopropyl-[2,2'-bipyridine]-6,6'-dicarboxamide as ligand were synthesized. The structure of these complexes was established by single-crystal X-ray diffraction, mass spectrometry, 1H and 13C nuclear magnetic resonance, ultraviolet-visible, infrared spectroscopy, and thermogravimetry. Bipyridinic ligands provide formation of coordinatively saturated complexes of lanthanide ions and strong photoluminescence (PL). The Eu3+- and Tb3+-complexes exhibit PL emission in the red and green regions observed at a 340 nm excitation. The quantum yield for the complexes was revealed to be 36.5 and 12.6% for Tb3+- and Eu3+-complexes, respectively. These lanthanide compounds could be employed as photoluminescent solid-state compounds and as emitting fillers in polymer (for example, polyethylene glycol) photoluminescent materials.

Re(I) Complexes as Backbone Substituents and Cross-Linking Agents for Hybrid Luminescent Polysiloxanes and Silicone Rubbers.

This study focuses on the synthesis of hybrid luminescent polysiloxanes and silicone rubbers grafted by organometallic rhenium(I) complexes using Cu(I)-catalyzed azido-alkyne cycloaddition (CuAAC). The design of the rhenium(I) complexes includes using a diimine ligand to create an MLCT luminescent center and the introduction of a triple C≡C bond on the periphery of the ligand environment to provide click-reaction capability. Poly(3-azidopropylmethylsiloxane-co-dimethylsiloxane) (N3-PDMS) was synthesized for incorporation of azide function in polysiloxane chain. [Re(CO)3(MeCN)(5-(4-ethynylphenyl)-2,2'-bipyridine)]OTf (Re1) luminescent complex was used to prepare a luminescent copolymer with N3-PDMS (Re1-PDMS), while [Re(CO)3Cl(5,5'-diethynyl-2,2'-bipyridine)] (Re2) was used as a luminescent cross-linking agent of N3-PDMS to obtain luminescent silicone rubber (Re2-PDMS). The examination of photophysical properties of the hybrid polymer materials obtained show that emission profile of Re(I) moiety remains unchanged and metallocenter allows to control the creation of polysiloxane-based materials with specified properties.

Red GaPAs/GaP Nanowire-Based Flexible Light-Emitting Diodes.

We demonstrate flexible red light-emitting diodes based on axial GaPAs/GaP heterostructured nanowires embedded in polydimethylsiloxane membranes with transparent electrodes involving single-walled carbon nanotubes. The GaPAs/GaP axial nanowire arrays were grown by molecular beam epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films has the main electroluminescence line at 670 nm. Membrane-based light-emitting diodes (LEDs) were compared with GaPAs/GaP NW array LED devices processed directly on Si growth substrate revealing similar electroluminescence properties. Demonstrated membrane-based red LEDs are opening an avenue for flexible full color inorganic devices.

Deprotonated diaminocarbene platinum complexes for thermoresponsive luminescent silicone materials: both catalysts and luminophores.

C,N-Chelate deprotonated diaminocarbene platinum(II) complexes were synthesized by coupling coordinated isocyanides and azinyl-substituted ureas. The complexes act as catalysts of α,ω-divinylpolydimethylsiloxane and poly(dimethylsiloxane-co-methylhydrosiloxane) hydrosilylation cross-linking. Silicone rubbers obtained with (aminoisoquinoline)-containing complex 3d exhibit temperature-responsive luminescence. Their emission changes irreversibly when heated from 80-100 °C (green radiation) to 120 °C or more (blue radiation).

Flexible Perovskite CsPbBr3 Light Emitting Devices Integrated with GaP Nanowire Arrays in Highly Transparent and Durable Functionalized Silicones.

The architecture of transparent contacts is of utmost importance for creation of efficient flexible light-emitting devices (LEDs) and other deformable electronic devices. We successfully combined the newly synthesized transparent and durable silicone rubbers and the semiconductor materials with original fabrication methods to design LEDs and demonstrate their significant flexibility. We developed electrodes based on a composite GaP nanowire-phenylethyl-functionalized silicone rubber membrane, improved with single-walled carbon nanotube films for a hybrid poly(ethylene oxide)-metal-halide perovskite (CsPbBr3) flexible green LED. The proposed approach provides a novel platform for fabrication of flexible hybrid optoelectronic devices.

Structural and Optical Properties of Self-Catalyzed Axially Heterostructured GaPN/GaP Nanowires Embedded into a Flexible Silicone Membrane.

Controlled growth of heterostructured nanowires and mechanisms of their formation have been actively studied during the last decades due to perspectives of their implementation. Here, we report on the self-catalyzed growth of axially heterostructured GaPN/GaP nanowires on Si(111) by plasma-assisted molecular beam epitaxy. Nanowire composition and structural properties were examined by means of Raman microspectroscopy and transmission electron microscopy. To study the optical properties of the synthesized nanoheterostructures, the nanowire array was embedded into the silicone rubber membrane and further released from the growth substrate. The reported approach allows us to study the nanowire optical properties avoiding the response from the parasitically grown island layer. Photoluminescence and Raman studies reveal different nitrogen content in nanowires and parasitic island layer. The effect is discussed in terms of the difference in vapor solid and vapor liquid solid growth mechanisms. Photoluminescence studies at low temperature (5K) demonstrate the transition to the quasi-direct gap in the nanowires typical for diluted nitrides with low N-content. The bright room temperature photoluminescent response demonstrates the potential application of nanowire/polymer matrix in flexible optoelectronic devices.

Site-Specific Neuromodulation of Detrusor and External Urethral Sphincter by Epidural Spinal Cord Stimulation.

Impairments of the lower urinary tract function including urine storage and voiding are widely spread among patients with spinal cord injuries. The management of such patients includes bladder catheterization, surgical and pharmacological approaches, which reduce the morbidity from urinary tract-related complications. However, to date, there is no effective treatment of neurogenic bladder and restoration of urinary function. In the present study, we examined neuromodulation of detrusor (Detr) and external urethral sphincter by epidural electrical stimulation (EES) of lumbar and sacral regions of the spinal cord in chronic rats. To our knowledge, it is the first chronic study where detrusor and external urethral sphincter signals were recorded simultaneously to monitor their neuromodulation by site-specific spinal cord stimulation (SCS). The data obtained demonstrate that activation of detrusor muscle mainly occurs during the stimulation of the upper lumbar (L1) and lower lumbar (L5-L6) spinal segments whereas external urethral sphincter was activated predominantly by sacral stimulation. These findings can be used for the development of neurorehabilitation strategies based on spinal cord epidural stimulation for autonomic function recovery after severe spinal cord injury (SCI).

A metal-free radical technique for cross-linking of polymethylhydrosiloxane or polymethylvinylsiloxane using AIBN.

A new method was developed for the metal-free cross-linking of silicone rubbers. This process uses azobisisobutyronitrile (AIBN) to selectively react with Si-H and vinyl groups as a free-radical initiator for the thermal curing of polymethylhydrosiloxane (PMHS) and polymethylvinylsiloxane (PMVS). The AIBN-initiated curing reaction between the Si-H groups of PMHS generated Si-O-Si and Si-Si cross-links. In contrast, PMVS was cured via the formation of C-C bonds through "methyl-vinyl" and "vinyl-vinyl" mechanisms. Curing reactions were performed at 80-120 °C in air and confirmed by 13C and 29Si solid state NMR analyses and swelling trials.

Cellulose-based hybrid glycosilicones via grafted-to metal-catalyzed hydrosilylation: "When opposites unite".

Hydrosilylation catalyzed by the rhodium(I) complex [Rh(acac)(CO)2] or platinum(0)-based Karstedt's catalyst was employed to combine hydrophilic propargylated hydroxyethyl cellulose and hydrophobic hydride-terminated polydimethylsiloxane to give polymer hybrid structures. The final polymers were characterized by FTIR, solid state 1H, 13C and 29Si NMR, contact angle, microcalorimetry and thermogravimetry measurements. The grafting degree was controlled by the catalyst choice and by the reagent load variations; an increase of the polysiloxane load and a change from Karstedt's to the rhodium catalyst led to a higher (from 2 to 7%) silicon content in the glycosilicones. The glycosilicones were insoluble in water, but swelled in organic solvents (DMSO, DMF, and chloroform). The hydrophilicity of the glycosilicones decreased with incrementing silicon content: the contact angles increased from 30 (cellulose) to 103-131° in the hybrids. The glycosilicones obtained via the hydrosilylation are less toxic toward algae Chlorella vulgaris and infusoria Paramecium caudatum than those obtained with CuAAC.

Platinum-catalyzed reactions between Si-H groups as a new method for cross-linking of silicones.

The platinum-catalyzed self-cross-linking of polymethylhydrosiloxane at RT in air was performed for the first time and proved by 1H, 13C, and 29Si SSNMR and swelling measurements. Quantum chemical modeling of possible structures was investigated. Platinum (0) and (ii) complexes were used as catalysts between the Si-H groups of polymethylhydrosiloxane. Karstedt's catalyst leads to Si-O-Si and Si-Si bond formation, but cis-[PtCl2(BnCN)2] generates predominantly Si-O-Si cross-links. cis-[PtCl2(BnCN)2] allows creating high-quality silicone rubbers without visible mechanical defects. This cross-linking approach can be used to obtain new Si-H-containing silicone materials.

bis-Nitrile and bis-Dialkylcyanamide Platinum(II) Complexes as Efficient Catalysts for Hydrosilylation Cross-Linking of Siloxane Polymers.

cis- and trans-Isomers of the platinum(II) nitrile complexes [PtCl2(NCR)2] (R = NMe2, N(C5H10), Ph, CH2Ph) were examined as catalysts for hydrosilylation cross-linking of vinyl-terminated polydimethylsiloxane and trimethylsilyl-terminated poly(dimethylsiloxane-co-ethylhydrosiloxane) producing high quality silicone rubbers. Among the tested platinum species the cis-complexes are much more active catalysts than their trans-congeners and for all studied platinum complexes cis-[PtCl2(NCCH2Ph)2] exhibits the best catalytic activity (room temperature, c = 1.0 × 10(-4) mol/L, τpot-life 60 min, τcuring 6 h). Although cis-[PtCl2(NCCH2Ph)2] is less active than the widely used Karstedt's catalyst, its application for the cross-linking can be performed not only at room temperature (c = 1.0 × 10(-4) mol/L), but also, more efficiently, at 80 °C (c = 1.0 × 10(-4)-1.0 × 10(-5) mol/L) and it prevents adherence of the formed silicone rubbers to equipment. The usage of the cis- and trans-[PtCl2(NCR)2] complexes as the hydrosilylation catalysts do not require any inhibitors and, moreover, the complexes and their mixtures with vinyl- and trimethylsilyl terminated polysiloxanes are shelf-stable in air. Tested catalysts do not form colloid platinum particles after the cross-linking.

Click-Type PtII -Mediated Hydroxyguanidine-Nitrile Coupling Provides Useful Catalysts for Hydrosilylation Cross-Linking.

The nitrile complexes trans-[PtCl2 (RCN)2 ] (R=Et (NC1), tBu (NC2), Ph (NC3), p-BrC6 H4 (NC4)) and cis-[PtCl2 (RCN)2 ] (R=Et (NC5), tBu (NC6), Ph (NC7)) react with 1 equiv of the hydroxyguanidine OC4 H8 NC(=NOH)NH2 (HG) furnishing the mono-addition products trans- and cis-[PtCl2 (RCN){NH=C(R)ON=C(NH2 )NC4 H8 O}] (1-4 and 9-11; 7 examples; 54-74 % yield). Treatment of any of the nitrile complexes NC1-NC7 with HG in a 1:2 molar ratio generated the bis-addition products trans- and cis-[PtCl2 {NH=C(R)ON=C(NH2 )NC4 H8 O}2 ] (5-8 and 12-14; 7 examples; 69-89 % yield). The PtII -mediated coupling between nitrile ligands and HG proceeds substantially faster than the corresponding reactions involving amid- and ketoximes and gives redox stable products under normal conditions. Complexes 1, 6⋅4 CH2 Cl2 , 7⋅4 CH2 Cl2 , 8⋅2 CH2 Cl2 , and NC4 were studied by X-ray crystallography. Platinum(II) species 1-3, 10, 11, and especially 9, efficiently catalyze the hydrosilylation cross-linking of vinyl-terminated poly(dimethylsiloxane) and trimethylsilyl-terminated poly(dimethylsiloxane-co-ethylhydrosiloxane) giving high-quality thermally stable silicon resins with no structural defects. The usage of these platinum species as the catalysts does not require any inhibitors and, moreover, the complexes and their mixtures with vinyl- and trimethylsilyl-terminated polysiloxanes are shelf-stable in air.