Evaluation of a new 3D-printed tooth model allowing preoperative ICDAS assessment and caries removal.

INTRODUCTION: Teaching caries lesion management with operative care requires tooth models with highly realistic anatomical detail and caries lesions that can be assessed using ICDAS. This study aimed to develop and evaluate a new 3D-printed teeth model for ICDAS assessment and caries removal for pre-clinical hands-on education. METHODS: Printable tooth with different layers for enamel, dentin and carious lesions was designed and tested by 31 dental students. They were asked to visually and radiologically assess the ICDAS severity of the simulated carious lesions, establish the therapeutic strategy according to CariesCare 4D, and perform a qualitative assessment of the models based on five-point Likert scale items. RESULTS: Concerning carious lesions, the texture was realistic, and the shade was adequate for 94% and 97% of the participants. Ninety per cent of the participants found the model adequate to perform an ICDAS visual assessment. Seventy-four per cent of the students found the hardness adequate. Concerning the difference in shade and the noticeable hardness difference between enamel and dentin, participants have mixed agreement with a proportion of 61% and 55%, respectively. All the participants agreed these 3D-printed models provide a good caries simulation, are suitable for hands-on operative dentistry courses, and that learning outcomes better than the standard model. CONCLUSION: The present work shows that rapid prototyping paves the way for customized educational models capable of supporting operative but also preoperative skills. 3D printing opens up new opportunities by reducing the gap between pre-clinical training and clinical reality in caries management, which can positively impact the quality of patient care.

Microabrasion in the management of enamel discolorations in paediatric dentistry: a systematic review.

Structural abnormalities of the anterior teeth could be aesthetically compromising in young patients. The dentist must provide solutions while preserving dental tissue. Microabrasion approach can be a solution. We conducted a systematic literature review to evaluate whether microbrasion treatment in paediatric dentistry can improve aesthetic in cases of pre- or post-eruptive discolorations on tooth enamel. 741 articles published up to September 2021 were selected from 3 databases using the key word "microabrasion". 11 prospective studies including 6 randomized were relevant to the inclusion criteria. Microabrasion appears to be an effective and reliable technique for the management of pre and post enamel discoloration in paediatric dentistry, especially in fluorosis. More high-powered, well-conducted randomized studies with complete evaluation criteria are needed for other types of spots. Standardization of criteria for assessing treatment success and of the protocol required should be explored.

Relationship between Changes in Chemical Composition of Enamel Subsurface Lesions and the Emitted Nonlinear Optical Signals: An in vitro Study.

The development of new diagnostic technologies based on the light scattering and autofluorescence properties of dental tissues is required to improve the diagnostic ability of initial caries lesions earlier than previously done and promoting the potential of treatment without surgical intervention. The aim of this study is to correlate fluorescence-based results provided by multiphoton microscopy (MPM) with confocal Raman microscopy records using phosphate level at 960 cm-1 and the organic matrix at ∼2,931 cm-1 in healthy and demineralized human enamel. Measurements on 14 teeth were made using two incident lights of different wavelengths, released by confocal Raman microscopy and MPM. Raman phosphate peak intensity at 960 cm-1 along with organic to mineral ratio at (2,931/430 cm-1) and nonlinear optical signals (second harmonic generation [SHG] and intrinsic two-photon excited fluorescence [I2PEF]) were recorded from the demineralized and healthy enamel sites. Raman spectral maps showed that the higher the organic/mineral ratio in the demineralized enamel, the lower the intensity of mineral component in the same zone. MPM revealed new optical indicators of carious lesion as shown by the presence of a red-shifted fluorescence peak in the 650- to 750-nm area of the fluorescence spectrum of demineralized enamel. Moreover, on sample regions with insignificant autofluorescence, the emergence of the SHG signal could be noted. By comparing I2PEF images with the structural motifs observed by the confocal Raman imaging system, the morphological similarity of the acquired images was quite evident. Any change in the I2PEF spectra reflects alterations in the chemical composition of enamel. These findings may provide an important basis for potentially valuable applications of photonic tools in the clinical diagnosis of tooth pathological conditions, besides exposing the fundamental role of organic matrix in enamel integrity and reparation.

Reparative Mineralized Tissue Characterization after Direct Pulp Capping with Calcium-Silicate-Based Cements.

Nowadays, the preservation of dental pulp vitality is an integral part of our daily therapies. The success of these treatments depends on the clinical situation as well as the biomaterials used. Mineral Trioxide aggregate and BiodentineTM are commonly used as pulp capping materials. One objective of vital pulp therapy is the repair/regeneration of the pulp. In addition to the initial inflammatory status of the pulp, the nature and quality of the new mineralized tissue obtained after pulp capping directly influence the success of the treatment. In order to characterize the reparative dentin, in the current study, the chemical composition and microstructure of the dentin bridge after direct pulp capping using Biodentine™ and mineral trioxide aggregate (MTA) was studied by using Raman microspectroscopy and scanning electron microscopy, respectively. The results showed that the reparative dentin bridge observed in both groups presented dentin tubules and chemical composition similar to primary dentin. With the limitations of this study, the calcium-silicate-based cements used as pulp capping materials provide an optimal environment for pulp healing, resulting in a reparative dentin resembling on certain points of the primary dentin and the regeneration of the pulp.

Dental biomaterials for chairside CAD/CAM: State of the art.

The wide use of chairside CAD/CAM restorations has increased the diversity of the restorative material. For the practitioner, the selection of the appropriate material is difficult amongst the variety offered by the market. Information on the characteristics of the products can be difficult to assess due to the lack of up-to-date classification and the lack of reliability of manufacturer's advertising. The purpose of this article is to structure the data on restorative materials provided by various sources in order for the practitioner to choose the product most suited to the clinical situation. The objective is to classify chairside CAD/CAM materials and to define their characteristics and indications.

Dental students' attitudes towards management of pain and anxiety during a dental emergency: educational issues.

INTRODUCTION: High levels of patients' pain and anxiety characterise dental emergencies. The main objective of this study was to examine the self-reported attitudes of dental students towards these parameters in emergency conditions. A secondary objective was to determine if individual parameters (gender, personal experience of dental pain, personal dental anxiety and year of study) might affect their attitudes. METHODS: One-hundred and eighty-seven undergraduate dental students with clinical practice completed a multiple-choice self-administered questionnaire online. The aforesaid individual parameters were collected and the students were asked to rate the frequency of their behaviour towards items representing good management of patients' pain and anxiety. The chi-square test of independence, Fisher's exact test and multiple logistic regression models were used for statistical analysis. RESULTS: Oral assessment of anxiety before treatment was scarce and was significantly associated with the students having personally experienced dental pain (P = 0.007). Pre-, intra- and postoperative pain appeared to be managed unequally by the students. Male students were significantly less likely to inform patients about postoperative pain (P = 0.014). More clinical experience was associated with less systematic consideration for intra-operative pain (P < 0.05). Being dentally anxious showed no significant association with higher frequencies of behaviours towards patients' pain and anxiety. CONCLUSIONS: These findings highlight the need for educational improvement regarding pain and anxiety in emergency conditions, especially concerning the assessment methods and continuity in the control of pain. Emergency dental care appears to be a very suitable field for contextual learning.

One-step partial or complete caries removal and bonding with antibacterial or traditional self-etch adhesives: study protocol for a randomized controlled trial.

BACKGROUND: Current concepts in conservative dentistry advocate minimally invasive dentistry and pulp vitality preservation. Moreover, complete removal of carious dentin in deep carious lesions often leads to pulp exposure and root canal treatment, despite the absence of irreversible pulp inflammation. For years, partial caries removal has been performed on primary teeth, but little evidence supports its effectiveness for permanent teeth. Furthermore, the recent development of new antibacterial adhesive systems could be interesting in the treatment of such lesions. The objectives of this study are to compare the effectiveness of partial versus complete carious dentin removal in deep lesions (primary objective) and the use of an antibacterial versus a traditional two-step self-etch adhesive system (main secondary objective). METHODS/DESIGN: The DEep CAries Treatment (DECAT) study protocol is a multicenter, randomized, controlled superiority trial comparing partial versus complete caries removal followed by adhesive restoration. The minimum sample size required is 464 patients. Two successive randomizations will be performed (allocation ratio 1:1): the first for the type of excavation (partial versus complete) and the second (if no root canal treatment is required) for the type of adhesive (antibacterial versus traditional). For the two objectives, the outcome is the success of the treatment after 1 year, measured according to a composite outcome of five FDI criteria: material fracture and retention, marginal adaptation, radiographic examination (including apical pathologies), postoperative sensitivity and tooth vitality, and carious lesion recurrence. DISCUSSION: The study will investigate the interest of a conservative approach for the management of deep carious lesions in terms of dentin excavation and bioactive adhesive systems. The results may help practitioners achieve the most efficient restorative procedure to maintain pulp vitality and increase the restoration longevity. TRIAL REGISTRATION: ClinicalTrials.gov Identifier NCT02286388 . Registered in November 2014.

Functional mapping of human sound and carious enamel and dentin with Raman spectroscopy.

The goals of this trial were, first, to produce a Raman mapping of decay and sound dentin samples, through accurate analysis of the Raman band spectra variations of mineral and organic components. The second goal was to confirm the correlation between the Raman signal and the signal of a fluorescent camera, by assaying the concentration of pentosidine and natural collagen fluorescent crosslink using reverse phase high-pressure liquid chromatography. The first correlation assumed a possible relationship between the signal observed with the camera and Raman spectroscopy. The second correlation assumed an association with the Maillard reaction. Absence of a correlation for this trial was that no association could be found between Raman spectra characteristics, fluorescence variation and the HPLC assay. Our results void this absence.

Influence of temperature and relative humidity on dentin and enamel bonding: a critical review of the literature. Part 1. Laboratory studies.

PURPOSE: The aim of this literature review was to investigate the results from in vitro laboratory studies on the influence of temperature and relative humidity present before polymerization on enamel and dentin bonding systems. MATERIALS AND METHODS: A systematic search was carried out including articles published in English, in peer reviewed journals, and indexed in MEDLINE/PubMed database. The search was carried out using the terms: relative AND humidity AND dental. In vitro studies were retrieved and divided into laboratory simulation studies and studies on physical properties. Laboratory simulation studies were addressed by subtopic: resin-enamel bond strength, resin-dentin bond strength, and dentin-enamel microleakage. Studies on physical properties tested the influence of humidity and temperature through polymerization contraction, flexural strength, and dentin wettability. RESULTS: Laboratory simulation studies demonstrated a strong influence of humidity and temperature on dentin and enamel bond strength and microleakage with dental adhesives systems. The studies on physical properties failed to demonstrate any influence of humidity on the adhesion performance, except for wettability measurement. CONCLUSION: The clinical relevance of these in vitro results remains to be demonstrated. A review of in vivo clinical studies will complete the literature data presented here.

Advances in light-curing units: four generations of LED lights and clinical implications for optimizing their use: Part 2. From present to future.

UNLABELLED: The first part of this series of two described the history of light curing in dentistry and developments in LED lights since their introduction over 20 years ago. Current second- and third-generation LED light units have progressively replaced their halogen lamp predecessors because of their inherent advantages. The background to this, together with the clinical issues relating to light curing and the possible solutions, are outlined in the second part of this article. Finally, the innovative features of what may be seen as the first of a new fourth-generation of LED lights are described and guidance is given for the practitioner on what factors to consider when seeking to purchase a new LED light activation unit. CLINICAL RELEVANCE: Adequate curing in depth is fundamental to clinical success with any light-activated restoration. To achieve this goal predictably, an appropriate light source needs to be combined with materials knowledge, requisite clinical skills and attention to detail throughout the entire restoration process. As dentists increasingly use light-cured direct composites to restore large posterior restorations they need to appreciate the issues central to effective and efficient light curing and to know what to look for when seeking to purchase a new light-curing unit.

Confocal Raman microscopy and SEM/EDS investigations of the interface between the zirconia core and veneering ceramic: the influence of a liner and regeneration firing.

The aim of this study was to evaluate the changes in the transition layer at the interface between yttria partial stabilized tetragonal zirconia polycrystalline (Y-TZP) core and veneering feldspathic ceramic (VITA VM(®)9), under different manufacturing methods. Confocal Raman microscopy and energy dispersive X-ray spectroscopy (EDS) analyses were carried out on tapered veneered cross sections of the interface. For some samples, an additional firing of the core was used, as the application of an optional liner material between the core and veneer. Single Raman spectra were distinguishable between Y-TZP and the veneering materials. VM(®)9 and liner spectra were broadly superimposable. No substantial differences appeared in their chemical elemental composition. 2D Raman images and EDS analysis emphasized changes in the interdiffusion thickness; the additional firing of the core decreased the interdiffusion zone, and the highest firing temperature of the liner increased the interdiffusion zone. These results, which will help us understand the changes in this transition layer, are discussed.

Confocal Raman microscopic analysis of the zirconia/feldspathic ceramic interface.

OBJECTIVES: Esthetic demands and biocompatibility have prompted the development of all-ceramic dental crowns. Yttria tetragonal zirconia polycrystalline (Y-TZP) framework material has the best mechanical properties compared to other all-ceramic systems, but the interface is the weakest component of core veneered restorations. Confocal Raman microscopy possibilities are used to ensure the understanding of the zirconia-feldspathic ceramic relationship, which is not well known. METHODS: Bilayered zirconia (Vita In-Ceram(®) YZ) veneer (Vita VM(®)9) blocks were manufactured. Raman analyses were performed using two protocols: (1) single spectra, line scans and images on a sectioned and polished specimen and (2) in depth line scans on unprepared specimen. Single spectra, images and line scans provide information about the crystalline phases, their distribution and the existence of a possible diffusion at the Y-TZP/VM(®)9 interface, respectively. The elemental distribution of zirconium (Zr) and silicon (Si) around this interface were investigated using energy dispersive X-ray spectroscopy (EDS). RESULTS: Raman single spectra embodied a unique spectrum (crystalline) on Y-TZP and two spectra (crystalline and amorphous) on VM(®)9; these spectra were clearly distinguished. Raman line scans showed a series of transition spectra across the interface from VM(®)9 to Y-TZP. It emphasized an interdiffusion zone, which was estimated at a maximum of 2 microns, found on 2d Raman images and confirmed by EDS. The elemental distribution with EDS showed a mutual diffusion of Zr and Si and was mainly dominated by Si diffusion in Y-TZP. SIGNIFICANCE: Confocal Raman microscopy highlights an interdiffusion zone at the zirconia-feldspathic ceramic interface. The elemental transition layer is estimated and is supported by EDS analysis as a coupling technique.

Three generations of LED lights and clinical implications for optimizing their use. 1: from past to present.

In the present era of adhesive dentistry light-curing units are essential pieces of surgery equipment for everyday practice. The success and longevity of light-activated resin sealants, photo-cured restorations and orthodontic treatments are related to the efficacy of the light-curing process. Energy efficient blue LED lights are rapidly replacing their halogen lamp predecessors as the standard light source. Manufacturers are producing materials with different initiators and not all of these materials can be properly polymerized with blue LED lights.

Modeling colorant leakage techniques: application to endodontics.

OBJECTIVES: Our aim was to improve the comprehension of in vitro tracer leakage studies and to determine in which conditions such studies can be reliable. We aimed to develop different theoretical models to describe either an initially dry or a wet interface (slit) between sealer and dentin. METHODOLOGY: Equations based on physical laws were derived to model theoretically in vitro tracer penetration. For the dry interfaces, atmospheric, hydrostatic, tracer gravimetric, capillary and internal air pressures were considered as the underlying forces that control tracer penetration. For wet interfaces, the laws of diffusion were used to model colorant penetration. RESULTS: In both cases penetration is influenced by the width of the interface and by the size of the colorant. Calculations for dry conditions have shown that penetration is quick, mainly driven by the capillary pressure, and the penetration increases as the width of the interface diminishes. Dentinal tubules and the extent of their interconnection modify the penetration depth. For wet conditions, tracer size is the main factor controlling the penetration length and speed (the bigger the tracer, the slower the penetration). SIGNIFICANCE: Our model calculations demonstrate that tracer penetration studies have to be performed under strict experimental conditions. Dry and wet interfaces are two extreme cases with very different tracer penetration modes. In vitro colorant penetration tests should be performed in both of these conditions avoiding cases where the slit contains both air and water. Theses models can be adapted to other dental situations as well.

Water sorption and water solubility of current luting cements: an in vitro study.

OBJECTIVE: To evaluate the water-sorption characteristics and the solubility behavior of 4 luting cements-2 composite resins (CRs), a polyacid-modified composite resin (PMCR), and a resin-modified glass-ionomer cement (RMGIC)-according to the ISO 4049 specifications. METHOD AND MATERIALS: Five disks (15 x 1 mm) of each material (Variolink II [CR1; Vivadent], Panavia F [CR2; Kuraray], Resinomer [PMCR; Bisco], and Fuji Plus [RMGIC; GC]) were prepared according to the manufacturers' instructions. Specimens were first desiccated until a consistent mass was obtained. Specimens were immersed for 7 days in distilled water and immediately weighed after this period. Then the disks were post-desiccated and weighed every day for 35 days. The water sorption and solubility of each specimen were calculated according to the change in its weight as observed before and after immersion and desiccation periods. RESULTS: Fuji Plus exhibited the overall higher values of water sorption and solubility (P < .001). Of the 3 resin-based luting cements, Resinomer demonstrated significantly higher water sorption and solubility (P < .001), whereas Variolink II and Panavia F showed low values and were not significantly different (P = .2). CONCLUSIONS: Behavior of resin-based materials in water varies according to the composition characteristics. In particular, the high portion of hydrophilic chemical species, as well as the filler characteristics, provoke very high water sorption and solubility values. In this way, and within the limitations of this in vitro study, composite resin luting cements appear to be more suitable than compomers and resin-modified glass-ionomer cements to meet longevity requirements.

Gas permeability: a new quantitative method to assess endodontic leakage.

AIM: The aim of this study was to evaluate a new endodontic leakage measurement method. MATERIALS AND METHODS: Permeability was assessed measuring the gas flow passing through the root. Positive and negative tests were carried out to assess the validity of the method. We used glass capillaries for calibration (diameters of 15, 30, 40, 50 and 75 microm). The applicability of the method was assessed with human teeth using three sealing methods: GuttaFlow (GF) and a single cone; Pulp Canal Sealer (PCS) and a single cone; PCS and system B. RESULTS: This method demonstrated to be highly reproducible as the standard deviation was approximately 1% on average with glass capillaries. Significantly higher leakage (p<0.05) was recorded for endodontic treatment with GF and single cone compared to PCS and single cone and PCS with system B. CONCLUSION: Gas permeability is quantitative, sensitive, non-destructive and reproducible and seems appropriate for endodontic tests. It would participate in the indirect comprehension of leakage phenomena.

In vitro evaluation of microleakage of indirect composite inlays cemented with four luting agents.

STATEMENT OF PROBLEM: Microleakage around dental restorations is implicated in the occurrence of secondary carious lesions, adverse pulpal response, and reduced restoration longevity. PURPOSE: The aim of this in vitro study was to evaluate the microleakage of indirect resin composite inlays cemented with 4 luting agents. MATERIAL AND METHODS: Standardized Class V inlay preparations overlapping the cemento-enamel junction were prepared on the buccal and lingual surfaces of 40 extracted human mandibular third molars. Eighty postpolymerized, heat-treated resin composite inlays (Targis, 72 specimens, 8 controls) were processed in stone replicas and cemented into the preparations using 4 luting agents (n = 18 + 2 controls for each cement group): a resin composite used with a bonding agent (Variolink II/Excite), a resin composite used with a self-etching primer, but without bonding agent (Panavia F/ED Primer), a modified resin composite used with a bonding agent (Resinomer/One Step), and a resin-modified glass-ionomer cement (Fuji Plus). Thirty-six inlays (n = 9 + 1 control) were subjected to thermal cycling (2000 cycles, 5 degrees C/55 degrees C), whereas the other 36 were not. All the teeth were then immersed in 1% methylene blue dye solution for 48 hours. Microleakage score, margin location (enamel/cementum), thermal cycling history, and preparation location (buccal/lingual) were analyzed using a multivariate model (alpha = .05). Multivariate analysis was performed using a polychotomous logistic regression. RESULTS: The preparation location had no significant effect on dye penetration. The margin location (enamel or cementum) and the thermal cycling had a significant effect on microleakage (odds ratios [ORs] = 17.6 and 8.04, respectively). In comparing the 3 resin-based luting agents (Variolink II, Panavia F, and Resinomer) to Fuji Plus, Panavia F exhibited the lowest significant overall microleakage (OR = 0.09), followed by Variolink II (significant OR equal to 0.43), whereas Resinomer demonstrated the greatest significant overall microleakage (OR = 1.35). CONCLUSION: Within the experimental conditions of this in vitro study, thermal cycling significantly increased microleakage (OR = 8.04). The overall microleakage at the enamel margins was significantly lower than the overall microleakage at the cementum margins for the 4 luting agents tested (OR = 17.6).

Importance of water sorption and solubility studies for couple bonding agent--resin-based filling material.

This study investigated the water sorption and solubility of two light-cured resin composites (Filtek P60 and Solitaire 2), one compomer (Compoglass F), one ormocer (Admira) and the associated bonding agents (Scotchbond 1 [Scotchbond 1 = Scotchbond Single Bond in USA], Gluma One Bond, Excite and Admira Bond, respectively) and of a RMGIC (Fuji II LC). Five disks of each product type were subjected to water sorption and solubility tests based on ISO 4049 requirements. The data were subjected to Kruskal-Wallis and non-parametric multiple-comparison tests using ranked sums at 95% confidence interval. Fuji II LC showed the highest water sorption (167.5 microg/mm(-3)). Fuji II LC and Compoglass F had higher solubility values (8.3 and 10.0 microg/mm(-3), respectively) than the other materials. Bonding agents have very high water sorption and solubility values (between 77.4 and 355.4 microg/mm(-3) and between 75.9 and 144.9 microg/mm(-3), respectively) compared to the restorative materials. Gluma One Bond and Admira Bond showed lower sorption and solubility than Excite and Scotchbond 1.