Impact of nonlinearity including bleaching in MUTC photodetectors on RF-modulated electro-optic frequency combs.

We use the drift-diffusion equations to calculate the responsivity of a modified uni-traveling carrier (MUTC) photodetector (PD) with a frequency comb input that is generated by a series of short optical pulses. We first use experimental results for the responsivity of the MUTC PD to obtain an empirical model of bleaching in pulsed mode. We incorporate our empirical bleaching model into a drift-diffusion model to calculate the impact of nonlinearity in an MUTC PD on RF-modulated electro-optic frequency combs. We quantify the nonlinearity using the second- and third-order intermodulation distortion powers (IMD2 and IMD3), from which we calculate the second- and third-order output intercept points (OIP2 and OIP3). In contrast to a continuous wave (CW) input for which there is a single IMD2 and IMD3 and hence a single OIP2 and OIP3, each comb line n has its own IMD2n, IMD3n, OIP2n, and OIP3n associated with it. We determine the IMD2n, IMD3n, OIP2n, and OIP3n, and we compare the results with and without bleaching. We find that the impact of bleaching is complex and, somewhat surprisingly, not always detrimental. The principal effect of bleaching is to lower the responsivity, which decreases the nonlinearity due to space charge. While bleaching always reduces the OIP2n and OIP3n, we find that bleaching leads to a decreased distortion-to-signal ratio for large n.

Comparison of the impact of nonlinearity in a p-i-n and an MUTC photodetector on electro-optic frequency combs.

We calculate the impact of nonlinearity in both a p-i-n photodetector (PD) and a modified uni-traveling carrier (MUTC) PD on an RF-modulated frequency comb generated using 100-fs optical pulses with a 50-MHz repetition rate. We take into account bleaching (nonlinear saturation) that is due to the high peak-to-average-power ratio and contributes to the device nonlinearity. Nonlinear impairment of an RF-modulated continuous wave is typically characterized by the second- and third-order intermodulation distortion products (IMD2 and IMD3). In contrast, an RF-modulated frequency comb must be characterized by a distinct IMD2n and IMD3n for each comb line n. We calculate IMD2n and IMD3n in both p-i-n and MUTC PDs and compare the results. We also calculate the ratio of the IMD2n power and the IMD3n power to the fundamental power Sin in both p-i-n and MUTC PDs. We find that nonlinear distortion has a greater impact at high frequencies in the MUTC PD than in the p-i-n PD.

Obtaining more energetic modelocked pulses from a SESAM-based fiber laser.

A major design goal for femtosecond fiber lasers is to increase the output power but not at the cost of increasing the noise level or narrowing the bandwidth. Here, we perform a computational study to optimize the cavity design of a femtosecond fiber laser that is passively modelocked with a semiconductor saturable absorbing mirror (SESAM). We use dynamical methods that are more than a thousand times faster than standard evolutionary methods. We show that we can obtain higher pulse energies and hence higher output powers by simultaneously increasing the output coupling ratio, the gain, and the anomalous group delay dispersion. We can obtain output pulses that are from 5 to 15 times the energy of the pulse in the current experimental design with no penalty in the noise level or bandwidth.