Can face recognition be selectively preserved in some cases of amnesia? A cautionary tale.

Evidence suggests that some patients with isolated hippocampal damage appear to present with selective preservation of unfamiliar face recognition relative to other kinds of visual test stimuli (e.g., words). Bird and Burgess (2008) formulated a review and secondary analysis of a group of 10 cases all tested on a clinical assessment of word and face recognition memory (RMT, Warrington, 1984), which confirmed the key memory dissociation at the group level. The current work provides an updated secondary analysis of such cases with a larger published sample (N = 52). In addition to group-level analyses, we also re-evaluate evidence using a single case statistical approach (Crawford & Garthwaite, 2005), enabling us to determine how many would make criteria for a 'classical dissociation' (Crawford, Garthwaite, & Gray, 2003). Overall, group-level analyses indicated the key pattern of significant differences confined to words was limited to small control sample comparisons. When using the large control sample provided by Bird and Burgess (2008), hippocampal cases as a group were significantly poorer for both classes of items. Furthermore, our single-case approach indicated few had a performance pattern of a relative difference across face > word categories that would meet statistical significance; namely within individual differences across categories that would warrant a significant 'classical dissociation'. Moreover, these analyses also found several cases with a 'classical dissociation' in the reverse direction: namely preserved recognition of words. Such analyses serve to demonstrate the need for a more conservative statistical approach to be undertaken when reporting selective 'preservation' of a category in recognition memory. Whilst material specificity has important implications for understanding the role of the hippocampus in memory, our results highlight the need for statistical methods to be unquestionably rigorous before any claims are made. Lastly, we highlight other methodological issues critical to group analyses and make suggestions for future work.

Kartograf: A Geometrically Accurate Atom Mapper for Hybrid-Topology Relative Free Energy Calculations.

Relative binding free energy (RBFE) calculations have emerged as a powerful tool that supports ligand optimization in drug discovery. Despite many successes, the use of RBFEs can often be limited by automation problems, in particular, the setup of such calculations. Atom mapping algorithms are an essential component in setting up automatic large-scale hybrid-topology RBFE calculation campaigns. Traditional algorithms typically employ a 2D subgraph isomorphism solver (SIS) in order to estimate the maximum common substructure. SIS-based approaches can be limited by time-intensive operations and issues with capturing geometry-linked chemical properties, potentially leading to suboptimal solutions. To overcome these limitations, we have developed Kartograf, a geometric-graph-based algorithm that uses primarily the 3D coordinates of atoms to find a mapping between two ligands. In free energy approaches, the ligand conformations are usually derived from docking or other previous modeling approaches, giving the coordinates a certain importance. By considering the spatial relationships between atoms related to the molecule coordinates, our algorithm bypasses the computationally complex subgraph matching of SIS-based approaches and reduces the problem to a much simpler bipartite graph matching problem. Moreover, Kartograf effectively circumvents typical mapping issues induced by molecule symmetry and stereoisomerism, making it a more robust approach for atom mapping from a geometric perspective. To validate our method, we calculated mappings with our novel approach using a diverse set of small molecules and used the mappings in relative hydration and binding free energy calculations. The comparison with two SIS-based algorithms showed that Kartograf offers a fast alternative approach. The code for Kartograf is freely available on GitHub (https://github.com/OpenFreeEnergy/kartograf). While developed for the OpenFE ecosystem, Kartograf can also be utilized as a standalone Python package.

Evaluating the Conformations and Dynamics of Peptoid Macrocycles.

Peptoid macrocycles are versatile and chemically diverse peptidomimetic oligomers. However, the conformations and dynamics of these macrocycles have not been evaluated comprehensively and require extensive further investigation. Recent studies indicate that two degrees of freedom, and four distinct conformations, adequately describe the behavior of each monomer backbone unit in most peptoid oligomers. On the basis of this insight, we conducted molecular dynamics simulations of model macrocycles using an exhaustive set of idealized possible starting conformations. Simulations of various sizes of peptoid macrocycles yielded a limited set of populated conformations. In addition to reproducing all relevant experimentally determined conformations, the simulations accurately predicted a cyclo-octamer conformation for which we now present the first experimental observation. Sets of three adjacent dihedral angles (ϕi, ψi, ωi+1) exhibited correlated crankshaft motions over the course of simulation for peptoid macrocycles of six residues and larger. These correlated motions may occur in the form of an inversion of one amide bond and the concerted rotation of the preceding ϕ and ψ angles to their mirror-image conformation, a variation on "crankshaft flip" motions studied in polymers and peptides. The energy landscape of these peptoid macrocycles can be described as a network of conformations interconnected by transformations of individual crankshaft flips. For macrocycles of up to eight residues, our mapping of the landscape is essentially complete.

Role of selenium addition to CdZnTe matrix for room-temperature radiation detector applications.

Because of its ideal band gap, high density and high electron mobility-lifetime product, cadmium zinc telluride (CdZnTe or CZT) is currently the best room-temperature compound-semiconductor X- and gamma-ray detector material. However, because of its innate poor thermo-physical properties and above unity segregation coefficient for Zn, the wide spread deployment of this material in large-volume CZT detectors is still limited by the high production cost. The underlying reason for the low yield of high-quality material is that CZT suffers from three major detrimental defects: compositional inhomogeneity, high concentrations of dislocation walls/sub-grain boundary networks and high concentrations of Te inclusions/precipitates. To mitigate all these disadvantages, we report for the first time the effects of the addition of selenium to the CZT matrix. The addition of Se was found to be very effective in arresting the formation of sub-grain boundaries and its networks, significantly reducing Zn segregation, improving compositional homogeneity and resulting in much lower concentrations of Te inclusions/precipitates. Growth of the new quaternary crystal Cd1-xZnxTe1-ySey (CZTS) by the Traveling Heater Method (THM) is reported in this paper. We have demonstrated the production of much higher yield according to its compositional homogeneity, with substantially lower sub-grain boundaries and their network, and a lower concentration of Te inclusions/precipitates.

Exome sequencing reveals a novel COL2A1 mutation implicated in multiple epiphyseal dysplasia.

Mutations in the COMP, COL9A1, COL9A2, COL9A3, MATN3, and SLC26A2 genes cause approximately 70% of multiple epiphyseal dysplasia (MED) cases. The genetic changes involved in the etiology of the remaining cases are still unknown, suggesting that other genes contribute to MED development. Our goal was to identify a mutation causing an autosomal dominant form of MED in a large multigenerational family. Initially, we excluded all genes known to be associated with autosomal dominant MED by using microsatellite and SNP markers. Follow-up with whole-exome sequencing analysis revealed a mutation c.2032G>A (p.Gly678Arg) in the COL2A1 gene (NCBI Reference Sequence: NM_001844.4), which co-segregated with the disease phenotype in this family, manifested by severe hip dysplasia and osteoarthritis. One of the affected family members had a double-layered patella, which is frequently seen in patients with autosomal recessive MED caused by DTDST mutations and sporadically in the dominant form of MED caused by COL9A2 defect.

Stability of the Baseline Holder in Readout Circuits For Radiation Detectors.

Baseline holder (BLH) circuits are used widely to stabilize the analog output of application-specific integrated circuits (ASICs) for high-count-rate applications. The careful design of BLH circuits is vital to the overall stability of the analog-signal-processing chain in ASICs. Recently, we observed self-triggered fluctuations in an ASIC in which the shaping circuits have a BLH circuit in the feedback loop. In fact, further investigations showed that methods of enhancing small-signal stabilities cause an even worse situation. To resolve this problem, we used large-signal analyses to study the circuit's stability. We found that a relatively small gain for the error amplifier and a small current in the non-linear stage of the BLH are required to enhance stability in large-signal analysis, which will compromise the properties of the BLH. These findings were verified by SPICE simulations. In this paper, we present our detailed analysis of the BLH circuits, and propose an improved version of them that have only minimal self-triggered fluctuations. We summarize the design considerations both for the stability and the properties of the BLH circuits.

Novel ZnO:Al contacts to CdZnTe for X- and gamma-ray detectors.

CdZnTe (CZT) has made a significant impact as a material for room-temperature nuclear-radiation detectors due to its potential impact in applications related to nonproliferation, homeland security, medical imaging, and gamma-ray telescopes. In all such applications, common metals, such as gold, platinum and indium, have been used as electrodes for fabricating the detectors. Because of the large mismatch in the thermal-expansion coefficient between the metal contacts and CZT, the contacts can undergo stress and mechanical degradation, which is the main cause for device instability over the long term. Here, we report for the first time on our use of Al-doped ZnO as the preferred electrode for such detectors. The material was selected because of its better contact properties compared to those of the metals commonly used today. Comparisons were conducted for the detector properties using different contacts, and improvements in the performances of ZnO:Al-coated detectors are described in this paper. These studies show that Al:ZnO contacts to CZT radiation detectors offer the potential of becoming a transformative replacement for the common metallic contacts due to the dramatic improvements in the performance of detectors and improved long-term stability.

An array of virtual Frisch-grid CdZnTe detectors and a front-end application-specific integrated circuit for large-area position-sensitive gamma-ray cameras.

We developed a robust and low-cost array of virtual Frisch-grid CdZnTe detectors coupled to a front-end readout application-specific integrated circuit (ASIC) for spectroscopy and imaging of gamma rays. The array operates as a self-reliant detector module. It is comprised of 36 close-packed 6 × 6 × 15 mm(3) detectors grouped into 3 × 3 sub-arrays of 2 × 2 detectors with the common cathodes. The front-end analog ASIC accommodates up to 36 anode and 9 cathode inputs. Several detector modules can be integrated into a single- or multi-layer unit operating as a Compton or a coded-aperture camera. We present the results from testing two fully assembled modules and readout electronics. The further enhancement of the arrays' performance and reduction of their cost are possible by using position-sensitive virtual Frisch-grid detectors, which allow for accurate corrections of the response of material non-uniformities caused by crystal defects.

Test of a 32-channel Prototype ASIC for Photon Counting Application.

A new low-power application-specific integrated circuit (ASIC) for Cadmium Zinc Telluride (CZT) detectors for single-photon emission computed tomography (SPECT) application is being developed at BNL. As the first step, a 32-channel prototype ASIC was designed and tested recently. Each channel has a preamplifier followed by CR-RC3 shaping circuits and three independent energy bins with comparators and 16-bit counters. The ASIC was fabricated with TSMC 0.35-µm complementary metal-oxide-semiconductor (CMOS) process and tested in laboratories. The power consumption is around 1 mW/ch with a 2.5-V supply. With a gain of 400 mV/fC and the peaking time of 500 ns, the equivalent noise charge (ENC) of 360 e- has been measured in room temperature while the crosstalk rate is less than 0.3%. The 10-bit DACs for global thresholds have an integral nonlinearity (INL) less than 0.56% and differential nonlinearity (DNL) less than 0.33%. In the presentation, we will report the detailed test results with this ASIC.

Detection and Electrical Properties of Cd1-xZnxTe Detectors at Elevated Temperatures.

We have studied the behavior of Cd1-xZnxTe detectors in the temperature range 24-70°C. The detector count rate stability and leakage currents are presented as a function of voltage, time, and temperature. Detector polarization due to bulk and surface effects leading to a decreased leakage current was observed. At 70°C, the position of the 32 keV photopeak of 133Ba was stable with time. The peak position varies within only 3 keV, and the peak quality factor varied between 0.31 and 0.41, for a 24 h period of operation at a 60 V bias. The net count to total count ratio was also stable, with values varying between 0.56 and 0.59. The net count to total count ratio decreased from 0.78 at 25°C to 0.71 at 60°C. The conclusion is that Cd1-xZnxTe is a promising material for gamma ray detection at temperatures above room temperature.

Prospective study of mandibular fractures.

A one-year prospective study of mandibular fractures that included 253 consecutive patients with 422 mandibular fractures was completed at Charity Hospital, New Orleans. Nine major categories were studied. Patients with multiple mandibular fractures seemed to have a fracture pattern. Complications associated with mandibular fractures are influenced more by location of the fracture or fractures and the cause than by a few days' delay in treatment, the specific technique in treatment, or extraction of teeth associated with the fracture. Thorough knowledge of occlusion and the masticatory apparatus is paramount in successful treatment.

Surgical closure of large oroantral fistulas using a palatal island flap.

Modification of the palatal island flap used in cleft palate surgery has been used in 39 patients with large (1.5 to 3 cm in diameter) oroantral fistulas. The high success rate can be attributed to the flap's excellent blood supply, bulk, and mobility.

Use of pocket inlay grafts and tuberoplasty in maxillary prosthetic construction.

A method of surgical and prosthetic rehabilitation of the severely atrophic maxillae using pocket inlay grafts and tuberoplasty is presented. At 2 1/2 years postoperatively, the denture in a patient treated in this manner remains stable with good retention and function. The principles presented may be applied in a variety of situations to achieve greater retention and stability of the maxillary denture.

Wiskott-Aldrich syndrome: review of literature and report of case.

Wiskott-Aldrich syndrome has been described. Other reports and studies of the syndrome have been compiled. Discussion of the incompletely understood pathogenesis and current treatment modalities are included with a differential diagnosis of related conditions. Although this syndrome is uncommon, it is not rare. The patient's susceptibility to infection and propensity to bleed makes early recognition and vigorous treatment an important and challenging task. It is hoped that this report will foster awareness of such patients and the complications involved in treatment.

Microbiologic and antibiotic aspects of infections in the oral and maxillofacial region.

An overview of infection as it applies to the oral and maxillofacial region has been provided. The following conclusions are drawn: odontogenic infections are caused by microbes found in the host's oral flora; cultures of purulent material generally will yield three to six anaerobes and one aerobe, (the aerobe is usually a Streptococcus species); Gram stains of purulent material can aid in therapeutic strategies; anaerobic as well as aerobic cultures are necessary to isolate all pathogens; pathogens found in infections of bite wounds reflect the oral flora of the aggressor; early postoperative wound infections are caused by the host's own flora, whereas later infections may be caused by hospital-acquired bacteria; and hepatitis B and herpes simplex virus are occupational hazards. Recommendations have been made for antimicrobial prophylaxis and for treatment. We recognize that some of these selections may be controversial. For instance, the value of prophylactic antibiotics in orthognathic surgery is not well defined; recommendations were made only in certain instances. However, in severe penetrating maxillofacial injuries with devitalized tissue, recommendations for antibiotics were for broad and prolonged coverage. In this instance, use of antibiotics is considered therapeutic and not prophylactic. In each instance, we tried to validate the selection. Our rationale has been to choose the antibiotics most active against the likely pathogens; additionally, consideration was given to drug toxicity and adverse reactions. We regard penicillin as the preferred agent for prophylaxis and treatment of most odontogenic infections. Alternative drugs include cephalosporins, doxycycline, and clindamycin. Erythoromycin and tetracycline are considered less effective than the former agents. Finally, we believe that successful treatment of infection depends as much on changing the microenvironment of the infected tissue by debridement and drainage as on appropriate antimicrobial therapy.