RESUMO
Electronic relaxation dynamics of solution-phase redox-exfoliated molybdenum disulfide (MoS2) monolayer and multilayer ensembles are described. MoS2 was exfoliated using polyoxometalate (POM) reductants. This process yields a colloidal heterostructure consisting of MoS2 2D sheet multilayers with surface-bound POM complexes. Using two-dimensional electronic spectroscopy, transient bleaching and photoinduced absorption signals were detected at excitation/detection energies of 1.82/1.87 and 1.82/1.80 eV, respectively. Approximate 100-fs bandgap renormalization (BGR) and subsequent defect- and phonon-mediated relaxation on the picosecond timescale were resolved for several MoS2 thicknesses spanning from 1 to 2 L to â¼20 L. BGR rates were independent of sample thickness and slightly slower than observations for chemical vapor deposition-grown MoS2 monolayers. However, defect-mediated relaxation accelerated â¼10-fold with increased sample thicknesses. The relaxation rates increased from 0.33 ± 0.05 to 1.2 ± 0.1 and 3.1 ± 0.4 ps-1 for 1-2 L, 3-4 L, and 20 L fractions. The thicknesses-dependent relaxation rates for POM-MoS2 heterostructures were modeled using a saturating exponential function that showed saturation at thirteen MoS2 layers. The results suggest that the increased POM surface coverage leads to larger defect density in the POM-MoS2 heterostructure. These are the first descriptions of the influence of sample thickness on electronic relaxation rates in solution-phase redox-exfoliated POM-MoS2 heterostructures. Outcomes of this work are expected to impact the development of solution-phase exfoliation of 2D metal-chalcogenide heterostructures.
RESUMO
The nonlinear optical (NLO) response of photonic materials plays an important role in the understanding of light-matter interaction as well as pointing out a diversity of photonic and optoelectronic applications. Among the recently studied materials, 2D-LTMDs (bi-dimensional layered transition metal dichalcogenides) have appeared as a beyond-graphene nanomaterial with semiconducting and metallic optical properties. In this article, we review most of our work in studies of the NLO response of a series of 2D-LTMDs nanomaterials in suspension, using six different NLO techniques, namely hyper Rayleigh scattering, Z-scan, photoacoustic Z-scan, optical Kerr gate, and spatial self-phase modulation, besides the Fourier transform nonlinear optics technique, to infer the nonlinear optical response of semiconducting MoS2, MoSe2, MoTe2, WS2, semimetallic WTe2, ZrTe2, and metallic NbS2 and NbSe2. The nonlinear optical response from a thermal to non-thermal origin was studied, and the nonlinear refraction index and nonlinear absorption coefficient, where present, were measured. Theoretical support was given to explain the origin of the nonlinear responses, which is very dependent on the spectro-temporal regime of the optical source employed in the studies.
RESUMO
By employing the optical Kerr gate technique at 800 nm with 180 fs pulses at 76 MHz, we evaluated the third-order nonlinear optical response of two-dimensional (2D) semiconducting MoS2, semimetallic ZrTe2, and metallic NbS2 and NbSe2. The modulus of the nonlinear refractive index was measured to range from 8.6 × 10-19 m2/W to 5.3 × 10-18 m2/W, with all materials' response time limited by the pulse duration. The physical mechanism to explain the ultrafast response time's origin considers the nature of the 2D material, as will be discussed.
RESUMO
Niobium disulfide is a layered transition metal dichalcogenide that is being exploited as a two-dimensional material. Although it is a superconductor at low temperatures and demonstrates great potential to be applied as a catalyst or co-catalyst in hydrogen evolution reactions, only a few reports have demonstrated the synthesis of a few-layer NbS2. However, before applications can be pursued, it is essential to understand the main characteristics of the obtained material and its stability under an atmospheric environment. In this work, we conducted a thorough characterization of redox-exfoliated NbS2 nanoflakes regarding their structure and stability in an oxygen-rich environment. Structural, morphological, and spectroscopic characterization demonstrated different fingerprints associated with distinct oxidation processes. This led us to identify oxide species and analyse the stability of the redox exfoliated NbS2 nanosheets in air, suggesting the most likely reaction pathways during the NbS2 interaction with oxygen, which agrees with our density-functional theory results. The mastery over the stability of layered materials is of paramount importance to target future applications, mainly because the electronic properties of these materials are strongly affected by an oxidizing environment.
RESUMO
The effective fifth-order susceptibility, ${\chi}_{\rm eff}^{(5)}$, of two-dimensional (2D) semiconducting layered transition metal dichalcogenide (LTMD) molybdenum disulfide (${\rm MoS}_2$) is reported here for the first time, to the best of our knowledge. Using the $ Z $-scan technique with a laser operating at 800 nm, 1 kHz, 100 fs, we investigated the nonlinear behavior of ${\rm MoS}_2$ suspended in acetonitrile (concentration, 70 µg/ml). The effective nonlinear refractive index ${{n}_{4,{eff}}} = - ({7.6 \pm 0.5}) \times {10^{- 26}}\; {{\rm cm}^4}/{{\rm W}^2}$, proportional to ${\rm Re}{\chi}_{\rm eff}^{(5)}$, was measured for monolayer ${\rm MoS}_2$ nanoflakes, prepared by a modified redox exfoliation method. We also determined the value of the nonlinear refractive index ${{n}_2} = + ({4.8 \pm 0.5}) \times {10^{- 16}}\;{{\rm cm}^2}/{\rm W}$, which is related to the material's effective third-order optical susceptibility real part, ${Re\chi}_{\rm eff}^{(3)}$. For comparison, we also investigated the nonlinear response of tungsten disulfide (${\rm WS}_2$) monolayers, prepared by the same method and suspended in acetonitrile (concentration, 40 µg/ml), which only exhibited the third-order nonlinear effect in the same intensity range, up to ${120}\;{{{\rm GW}/{\rm cm}}^2}$. Nonlinear absorption was not observed in either ${\rm MoS}_2$ or ${\rm WS}_2$.
RESUMO
Nonlinear optical characterization of nanostructured layered transition metal dichalcogenides (LTMDs) is of fundamental interest for basic knowledge and applied purposes. In particular, second-order optical nonlinearities are the basis for second harmonic generation as well as sum or difference frequency generation and have been studied in some 2D TMDs, especially in those with a semiconducting character. Here we report, for the first time, on the second-order nonlinearity of the semi-metallic ZrTe2 monolayer in acetonitrile suspension (concentration of 4.9 × 1010 particles per cm3), synthesized via a modified redox exfoliation method and characterized using the Hyper-Rayleigh scattering technique in the nanosecond regime. The orientation-averaged first-hyperpolarizability was found to be ß(2ω) = (7.0 ± 0.3) × 10-24 esu per ZrTe2 monolayer flake, the largest reported so far. Polarization-resolved measurements were performed in the monolayer suspension and indicate the dipolar origin of the generated incoherent second harmonic wave.
RESUMO
We demonstrate random laser emission from Rhodamine 6G with ZrTe2 transition metal dichalcogenide (TMD) as nanoscatters, both in powder and 2D nanoflakes liquid suspension. The 2D semimetal ZrTe2 was synthesized by a modified redox exfoliation method to provide single layer TMD, which was employed for the first time as the scatter medium to provide feedback in an organic gain medium random laser. In order to exploit random laser emission and its threshold value, replica symmetry breaking leading to a photonic paramagnetic to photonic spin glass transition in both 2D and 3D (powder) ZrTe2 was demonstrated. One important aspect of mixing organic dyes with ZrTe2 is that there is no chemical reaction leading to dye degradation, demonstrated by operating over more than 2 hours of pulsed (5 Hz) random laser emission.
RESUMO
Understanding the electronic structure of doped semiconductors is essential to realize advancements in electronics and in the rational design of nanoscale devices. Reported here are the results of time-resolved X-ray absorption studies on copper-doped cadmium sulfide nanoparticles that provide an explicit description of the electronic dynamics of the dopants. The interaction of a dopant ion and an excess charge carrier is unambiguously observed via monitoring the oxidation state. The experimental data combined with DFT calculations demonstrate that dopant bonding to the host matrix is modulated by its interaction with charge carriers. Furthermore, the transient photoluminescence and the kinetics of dopant oxidation reveal the presence of two types of surface-bound ions that create midgap states.
RESUMO
A one-step method to produce ≈12 nm hydrodynamic diameter water-soluble CdSe/ZnS quantum dots (QDs), as well as CdS/ZnS, ZnSe/ZnMnS/ZnS, AgInS2 /ZnS, and CuInS2 /ZnS QDs, by ligand exchange with a near-monolayer of organosilane caps is reported. The method cross-links the surface-bound silane ligands such that the samples are stable on the order of months under ambient conditions. Furthermore, the samples may retain a high quantum yield (60%) over this time. Several methods to functionalize aqueous QD dispersions with proteins and fluorescent dyes have been developed with reaction yields as high as 97%.
Assuntos
Pontos Quânticos/química , Silanos/química , Água/química , Biotinilação , Compostos de Cádmio/química , Celulose/química , Difusão Dinâmica da Luz , Hidrodinâmica , Rodaminas/química , Compostos de Selênio/química , Solubilidade , Sulfetos/química , Compostos de Zinco/químicaRESUMO
We report here a method for synthesizing CdSe quantum dots (QDs) containing copper such that each QD is doped with four copper ions. The synthesis is a derivative of the cluster-seed method, whereby organometallic clusters act as nucleation centers for quantum dots. The method is tolerant of the chemical identity of the seed; as such, we have doped four copper ions into CdSe QDs using [Na(H2O)3]2[Cu4(SPh)6] as a cluster seed. The controlled doping allows us to monitor the photophysical properties of guest ions with X-ray spectroscopy, specifically XANES and EXAFS at the copper K-edge. These data reveal that copper can capture both electrons and holes from photoexcited CdSe QDs. When the dopant is oxidized, photoluminescence is quenched and the copper ions translocate within the CdSe matrix, which slows the return to an emissive state.
Assuntos
Compostos de Cádmio/química , Cobre/química , Cristalização/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pontos Quânticos , Compostos de Selênio/química , Teste de Materiais , Tamanho da PartículaRESUMO
Developing simple synthetic methods to control the size and morphology of nanocrystals is an active area of research as these parameters control the material's electronic and optical properties. For a semiconductor with a symmetrical crystal structure such as lead selenide, anisotropic colloidal growth has been previously accomplished via the use of templates, seeds, or by block assembly of smaller, symmetrical subunits. Here, we present a simple method to create monodisperse lead selenide nanorods and multipods at low temperatures. The size distribution and the observed morphologies are consistent with a continuous, anisotropic growth of material. The syntheses of these anisotropic shapes are due to the nature of the nuclei that form upon injection of precursors into partially oxidized alkene solvents that may contain lactone and carbonate-functional derivatives.
Assuntos
Chumbo/química , Nanopartículas/química , Nanotecnologia/métodos , Compostos de Selênio/química , Cloreto de Sódio/química , Anisotropia , Carbonatos/química , Coloides , Lactonas/química , Fenômenos Ópticos , Oxirredução , Solventes/química , Esqualeno/química , TemperaturaRESUMO
We have developed a strategy for the ratiometric detection of toxic Hg(2+) ions using a semiconductor nanocrystal energy-transfer donor coupled to a mercury-sensitive "turn-on" dye acceptor. The results demonstrate a new paradigm of toxic metal sensing that resolves the difficulties with the use of semiconductor nanotechnology for this purpose.
Assuntos
Compostos de Cádmio/química , Transferência Ressonante de Energia de Fluorescência/métodos , Mercúrio/análise , Pontos Quânticos , Compostos de Selênio/química , Sulfetos/química , Poluentes Químicos da Água/análise , Compostos de Zinco/química , Corantes Fluorescentes/química , Íons/análise , Rodaminas/química , Água/análiseRESUMO
Many types of metal and semiconductor nanoparticles (NPs) are created via colloidal synthetic methods, which renders the materials hydrophobic. Such NPs are dispersed in water through surface organic cap exchange or by amphiphilic polymer encapsulation; often, water solubility is achieved via the presence of carboxylic acid functionalities on the solubilizing agents. While this renders the material water-soluble, subsequent functionalization of the systems can be very difficult. The most obvious method to derivatize carboxylic acid coated NPs is to conjugate chemical and biological moieties containing amine functionality to the NP surface using the water-soluble activator 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). However, the excess use of this reagent appears to cause complete and permanent precipitation of the NPs. We report here our method on the chemical and biological functionalization of a variety of semiconductor nanoparticle systems using novel carbodiimide reagents. These reagents do not cause precipitation even at high loading levels and can be used to efficiently functionalize carboxylic acid coated NPs.