RESUMO
Formation of a selective emitter in crystalline silicon solar cells improves photovoltaic conversion efficiency by decoupling emitter regions for light absorption (moderately doped) and metallization (degenerately doped). However, use of a selective emitter in silicon nanowire (Si NW) solar cells is technologically challenging because of difficulties in forming robust Ohmic contacts that interface directly with the top-ends of nanowires. Here we describe a self-aligned selective emitter successfully integrated into an antireflective Si NW solar cell. By one-step metal-assisted chemical etching, NW arrays formed only at light-absorbing areas between top-metal grids while selectively retaining Ohmic contact regions underneath the metal grids. We observed a remarkable â¼40% enhancement in blue responses of internal quantum efficiency, corresponding to a conversion efficiency of 12.8% in comparison to the 8.05% of a conventional NW solar cell.
RESUMO
The optimal hybridization of photovoltaic (PV) and thermoelectric (TE) devices has long been considered ideal for the efficient harnessing solar energy. Our hybrid approach uses full spectrum solar energy via lossless coupling between PV and TE devices while collecting waste energy from thermalization and transmission losses from PV devices. Achieving lossless coupling makes the power output from the hybrid device equal to the sum of the maximum power outputs produced separately from individual PV and TE devices. TE devices need to have low internal resistances enough to convey photo-generated currents without sacrificing the PV fill factor. Concomitantly, a large number of p-n legs are preferred to drive a high Seebeck voltage in TE. Our simple method of attaching a TE device to a PV device has greatly improved the conversion efficiency and power output of the PV device (~30% at a 15°C temperature gradient across a TE device).
RESUMO
Traditional Pt counter electrode in quantum-dot-sensitized solar cells suffers from a low electrocatalytic activity and instability due to irreversible surface adsorption of sulfur species incurred while regenerating polysulfide (S(n)(2-)/S(2-)) electrolytes. To overcome such constraints, chemically synthesized Cu(2)ZnSn(S(1-x)Se(x))(4) nanocrystals were evaluated as an alternative to Pt. The resulting chalcogenides exhibited remarkable electrocatalytic activities for reduction of polysulfide (S(n)(2-)) to sulfide (S(2-)), which were dictated by the ratios of S/Se. In this study, a quantum dot sensitized solar cell constructed with Cu(2)ZnSn(S(0.5)Se(0.5))(4) as a counter electrode showed the highest energy conversion efficiency of 3.01%, which was even higher than that using Pt (1.24%). The compositional variations in between Cu(2)ZnSnS(4) (x = 0) and Cu(2)ZnSnSe(4) (x = 1) revealed that the solar cell performances were closely related to a difference in electrocatalytic activities for polysulfide reduction governed by the S/Se ratios.
RESUMO
We perform a systematic numerical study to characterize the tradeoff between the plasmonic enhancement and optical loss in periodically aligned, silicon nanowire (SiNW) arrays integrated with a silver back reflector (Ag BR). Optimizing the embedded depth of the wire bottoms into a silver reflector achieved a highly efficient SiNW solar cell. Compared to the SiNW solar cell employing a flat back reflector, the embedded depth of ~20 nm resulted in the relative increase of ~5% in ultimate solar cell efficiency.
RESUMO
A novel stamped hybrid solar cell was proposed using the stamping transfer technique by stamping an active PEDOT:PSS thin layer onto the top of silicon nanowires (SiNWs). Compared to a bulk-type counterpart that fully embeds SiNWs inside PEDOT:PSS, an increase in the photovoltaic efficiency was observed by a factor of â¼4.6, along with improvements in both electrical and optical responses for the stamped hybrid cell. Such improvements for hybrid cells was due to the formation of well-connected and linearly aligned active PEDOT:PSS channels at the top ends of the nanowires after the stamping process. These stamped channels facilitated not only to improve the charge transport, light absorption, but also to decrease the free carriers as well as exciton recombination losses for stamped hybrid solar cells.
Assuntos
Nanofios/química , Poliestirenos/química , Silício/química , Energia Solar , Tiofenos/química , Eletrodos , Teste de Materiais , Microscopia Eletrônica de Varredura , Nanotecnologia/métodos , Nanofios/ultraestrutura , Polímeros/químicaRESUMO
The optical properties of metal nanoparticle (NP)-coated silicon nanowires (Si NWs) are theoretically investigated using COMSOL Multiphysics commercial software. A geometrical array of periodic Si NWs coated with metal NPs is proposed. The simulation demonstrates that light absorption could be enhanced significantly in a long wavelength region of the solar spectrum, based upon the localized surface plasmons generated around metal NPs. Various metal NPs, such as Au, Ag, and Al, are all found to increase their light absorption while in contact with Si NWs, in which the Au NPs show the best result in light enhancement. This theoretical work might prove useful in providing a fundamental understanding toward improving further the efficiency of Si wired solar cells.
RESUMO
Nanodisk-shaped, single-crystal gold silicide heterojunctions were inserted into silicon nanowires during vapor-liquid-solid growth using Au as a catalyst within a specific range of chlorine-to-hydrogen atomic ratio. The mechanism of nanodisk formation has been investigated by changing the source gas ratio of SiCl4 to H2. We report that an over-supply of silicon into the Au-Si liquid alloy leads to highly supersaturated solution and enhances the precipitation of Au in the silicon nanowires due to the formation of unstable phases within the liquid alloy. It is shown that the gold precipitates embedded in the silicon nanowires consisted of a metastable gold silicide. Interestingly, faceting of gold silicide was observed at the Au/Si interfaces, and silicon nanowires were epitaxially grown on the top of the nanodisk by vapor-liquid-solid growth. High resolution transmission electron microscopy confirmed that gold silicide nanodisks are epitaxially connected to the silicon nanowires in the direction of growth direction. These gold silicide nanodisks would be useful as nanosized electrical junctions for future applications in nanowire interconnections.
RESUMO
A simple method to extract the optical bandgap of Si nanowire (SiNW) arrays that utilizes the reflection spectra of freestanding SiNW arrays is presented in this Letter. At a fixed nanowire diameter, three different wire lengths reproducibly formed a cross point in their reflectance curve plots. The cross point wavelength corresponded to the optical bandgap, as verified by the classical Tauc's model. The optical bandgap of the SiNW arrays (112 nm in average diameter) was measured to be ~1.19 eV, which is larger than the ~1.08 eV bandgap of bulk Si. Further decreasing the wire diameter to 68 nm caused an increase of the bandgap to ~1.24 eV, which is closer to the optimal bandgap (~1.40 eV) required to achieve the highest conversion efficiency in single-junction photovoltaic devices. Our method suggests that the multijunction tandem structure can be realized via control of the diameter of SiNW arrays.
Assuntos
Nanofios , Fenômenos Ópticos , Silício/química , Absorção , Análise EspectralRESUMO
Vertically aligned silicon nanowires (SiNWs) were cost-effectively formed on a four-inch silicon wafer using a simple room temperature approach, i.e., metal-assisted electroless etching. Tapering the NWs by post-KOH dipping achieved separation of each NW from the bunched NW, resulting in a strong enhancement of broadband optical absorption. As electroless etching time increases, the optical crossover feature was observed in the tradeoff between enhanced light trapping (by graded-refractive index during initial tapering) and deteriorated reflectance (by decreasing the areal density of NWs during later tapering). Compared to the bunched SiNWs, tapered NW solar cells demonstrated superior photovoltaic characteristics, such as a short circuit current of 17.67 mA/cm² and a cell conversion efficiency of ~6.56% under 1.5 AM illumination.
RESUMO
Silicon nanowires (NWs) and microwires (MWs) are cost-effectively integrated on a 4-inch wafer using metal-assisted electroless etching for solar cell applications. MWs are periodically positioned using low-level optical patterning in between a dense array of NWs. A spin-on-doping technique is found to be effective for the formation of heavily doped, thin n-type shells of MWs in which the radial doping profile is easily delineated by low voltage scanning electron microscopy. Controlled tapering of the NWs results in additional optical enhancement via optimization of the tradeoff between increased light trapping (by a graded-refractive-index) and increased reflectance (by decreasing areal density of NWs). Compared to single NW (or MW) arrayed cells, the co-integrated solar cells demonstrate improved photovoltaic characteristics, i.e. a short circuit current of 20.59 mA cm(-2) and a cell conversion efficiency of â¼ 7.19% at AM 1.5G illumination.
RESUMO
Utilizing the wafer-scale anodization of a thermally evaporated Ti layer onto a Si substrate, SiOx nanoparticles could be electrochemically nucleated into the pore bottoms of an anodic aluminum oxide. The formation of a Si-containing Ti layer (Ti(1-x)Six, x < 0.1) was identified between the Al and the silicon substrate by thermal diffusion of Si during the evaporation. Upon prolonged anodization of approximately 1 h after alumina barrier layer touched the Si-containing Ti layer, pyramid-shaped TiOx nanopillars formed underneath the pore bottoms as a result of a curvature inversion of the barrier oxide with Ti migration. These TiOx nanopillars were observed to act as a diffusion route of silicon from the Si-containing Ti layer. Only one SiOx nanoparticle (approximately 8 +/- 5 nm) for each pore was generally precipitated without Ti contamination. This finding suggests a new route which can make SiOx nanoparticles confined within an anodic aluminum oxide template.
RESUMO
Nanowires have been taken much attention as a nanoscale building block, which can perform the excellent mechanical function as an electromechanical device. Here, we have performed atomic force microscope (AFM)-based nanoindentation experiments of silicon nanowires in order to investigate the mechanical properties of silicon nanowires. It is shown that stiffness of nanowires is well described by Hertz theory and that elastic modulus of silicon nanowires with various diameters from ~100 to ~600 nm is close to that of bulk silicon. This implies that the elastic modulus of silicon nanowires is independent of their diameters if the diameter is larger than 100 nm. This supports that finite size effect (due to surface effect) does not play a role on elastic behavior of silicon nanowires with diameter of >100 nm.
RESUMO
Single-crystal, Al-catalyzed silicon nanowires were grown under atmospheric pressure using the dimpled feature of the Al metal that remained after removal of an anodic aluminum oxide (AAO) template directly formed on a Si substrate. Upon annealing in a hydrogen-rich atmosphere, the dimpled morphology of Al was transformed into a smooth, rounded shape in which Si nanodots were periodically embedded due to Si migration from the substrate. The positions of the nanodots were exactly the same as the positions of sawtooth features on the dimpled surface. Although Al-catalyzed silicon nanowires have been known to grow only under vacuum due to the tendency of Al to oxidize, these silicon nanodots, surrounded by residual AI, showed excellent resistance to oxidation under atmospheric pressure. These nanodots were also capable of acting as catalysts for the growth of nanowires, and played a role in determining the diameter of the nanowires. A thinner residual Al layer made it easier to form Si nanodots while reducing the size of the nanodots, which subsequently led to the growth of nanowires with smaller diameters and better crystalline morphology.