Schottky barrier height engineering on MoS2 field-effect transistors using a polymer surface modifier on a contact electrode.

Two-dimensional (2D) materials are highly sought after for their superior semiconducting properties, making them promising candidates for next-generation electronic and optoelectronic devices. Transition-metal dichalcogenides (TMDCs), such as molybdenum disulfide (MoS2) and tungsten diselenide (WSe2), are promising alternative 2D materials. However, the devices based on these materials experience performance deterioration due to the formation of a Schottky barrier between metal contacts and semiconducting TMDCs. Here, we performed experiments to reduce the Schottky barrier height of MoS2 field-effect transistors (FETs) by lowering the work function (Фm = Evacuum - EF,metal) of the contact metal. We chose polyethylenimine (PEI), a polymer containing simple aliphatic amine groups (-NH2), as a surface modifier of the Au (ФAu = 5.10 eV) contact metal. PEI is a well-known surface modifier that lowers the work function of various conductors such as metals and conducting polymers. Such surface modifiers have thus far been utilized in organic-based devices, including organic light-emitting diodes, organic solar cells, and organic thin-film transistors. In this study, we used the simple PEI coating to tune the work function of the contact electrodes of MoS2 FETs. The proposed method is rapid, easy to implement under ambient conditions, and effectively reduces the Schottky barrier height. We expect this simple and effective method to be widely used in large-area electronics and optoelectronics due to its numerous advantages.

Phase-coherent transport in trigonal gallium nitride nanowires.

Gallium nitride nanowires (GaN NWs) with triangular cross-section exhibit universal conductance fluctuations (UCF) originating from the quantum interference of electron wave functions in the NWs. The amplitude of UCF is inversely proportional to the applied bias current. The bias dependence of UCF, combined with temperature dependence of the resistance suggests that phase coherent transport dominates over normal transport in GaN NWs. A unique temperature dependence of phase-coherent length and fluctuation amplitude is associated with inelastic electron-electron scattering in NWs. The phase-coherence length extracted from the UCF is as large as 400 nm at 1.8 K, and gradually decreases as temperature increases up to 60 K.

A possible superconductor-like state at elevated temperatures near metal electrodes in an LaAlO3/SrTiO3 interface.

We experimentally investigated the transport properties near metal electrodes installed on a conducting channel in a LaAlO3/SrTiO3 interface. The local region around the Ti and Al electrodes has a higher electrical conductance than that of other regions, where the upper limits of the temperature and magnetic field can be well defined. Beyond these limits, the conductance abruptly decreases, as in the case of a superconductor. The samples with the Ti- or Al-electrode have an upper-limit temperature of approximately 4 K, which is 10 times higher than the conventional superconducting critical temperature of LaAlO3/SrTiO3 interfaces and delta-doped SrTiO3. This phenomenon is explained by the mechanism of electron transfer between the metal electrodes and electronic d-orbitals in the LaAlO3/SrTiO3 interface. The transferred electrons trigger a phase transition to a superconductor-like state. Our results contribute to the deep understanding of the superconductivity in the LaAlO3/SrTiO3 interface and will be helpful for the development of high-temperature interface superconductors.