RESUMO
The scarcity of fresh water necessitates sustainable and efficient water desalination strategies. Solar-driven steam generation (SSG), which employs solar energy for water evaporation, has emerged as a promising approach. Graphene oxide (GO)-based membranes possess advantages like capillary action and Marangoni effect, but their stacking defects and dead zones of flexible flakes hinders efficient water transportation, thus the evaporation rate lag behind unobstructed-porous 3D evaporators. Therefore, fundamental mass-transfer approach for optimizing SSG evaporators offers new horizons. Herein, a universal multi-force-fields-based method is presented to regularize membrane channels, which can mechanically eliminate inherent interlayer stackings and defects. Both characterization and simulation demonstrate the effectiveness of this approach across different scales and explain the intrinsic mechanism of mass-transfer enhancement. When combined with a structurally optimized substrate, the 4Laponite@GO-1 achieves evaporation rate of 2.782 kg m-2 h-1 with 94.48% evaporation efficiency, which is comparable with most 3D evaporators. Moreover, the optimized membrane exhibits excellent cycling stability (10 days) and tolerance to extreme conditions (pH 1-14, salinity 1%-15%), verifies the robust structural stability of regularized channels. This optimization strategy provides simple but efficient way to enhance the SSG performance of GO-based membranes, facilitating their extensive application in sustainable water purification technologies.
RESUMO
For an ordinary ferroelectric, the magnitude of the spontaneous electric polarization is at least one order of magnitude smaller than that resulting from the ionic displacement of the lattice vectors, and the direction of the spontaneous electric polarization is determined by the point group of the ferroelectric. Here, we introduce a new class of ferroelectricity termed Fractional Quantum Ferroelectricity. Unlike ordinary ferroelectrics, the polarization of Fractional Quantum Ferroelectricity arises from substantial atomic displacements that are comparable to lattice constants. Applying group theory analysis, we identify 28 potential point groups that can realize Fractional Quantum Ferroelectricity, including both polar and non-polar groups. The direction of polarization in Fractional Quantum Ferroelectricity is found to always contradict with the symmetry of the "polar" phase, which violates Neumann's principle, challenging conventional symmetry-based knowledge. Through the Fractional Quantum Ferroelectricity theory and density functional calculations, we not only explain the puzzling experimentally observed in-plane polarization of monolayer α-In2Se3, but also predict polarization in a cubic compound of AgBr. Our findings unveil a new realm of ferroelectric behavior, expanding the understanding and application of these materials beyond the limits of traditional ferroelectrics.
RESUMO
Design of admirable conductive hydrogels combining robust toughness, soft flexibility, desirable conductivity, and freezing resistance remains daunting challenges for meeting the customized and critical demands of flexible and wearable electronics. Herein, a promising and facile strategy to prepare hydrogels tailored to these anticipated demands is proposed, which is prepared in one step by homogeneous cross-linking of acrylamide using hydrophobic divinylbenzene stabilized by micelles under saturated high-saline solutions. The influence of high-saline environments on the hydrogel topology and mechanical performance is investigated. The high-saline environments suppress the size of hydrophobic cross-linkers in micelles during hydrogel polymerization, which weaken the dynamic hydrophobic associations to soften the hydrogels. Nevertheless, the homogeneous cross-linked networks ensure antifracture during ultralarge deformations. The obtained hydrogels show special mechanical performance combining extremely soft deformability and antifracture features (Young's modulus, 5 kPa; stretchability, 10200%; toughness, 134 kJ m-2; and excellent anticrack propagation). The saturated-saline environments also endow the hydrogels with desirable ion conductivity (106 mS cm-1) and freezing resistance (<20 °C). These comprehensive properties of the obtained hydrogels are quite suitable for flexible electronic applications, which is demonstrated by the high sensitivity and durability of the derived strain sensors.
RESUMO
Solar-driven interfacial evaporation (SIE) technology has great advantages in seawater desalination. However, during the long-term operation of a solar evaporator, salts can be deposited on the solar absorbing surface, which, in turn, hinders the evaporation process. Therefore, there is an urgent need to propose new antisalt strategies to solve this problem. Here, we present a novel cogeneration system leveraging a salt-tolerant, heterogeneous Janus-structured evaporator (FHJE) for simultaneous solar desalination and thermoelectric generation. The top evaporation layer is composed of a graphene-based photothermal membrane pre-embedded with Fe3+ cations, which enhanced solar absorption and energy conversion abilities. Meanwhile, the Fe3+ cations further contribute to the Donnan effect, effectively repelling salt ions in saltwater. The bottom layer comprises a hydrogel composed of hydrophilic phytic acid (PA) and poly(vinyl alcohol) (PVA), fostering facilitation of water transport. The FHJE was demonstrated to exhibit evaporation rate and efficiency as high as 3.655 kg m-2 h-1 and 94.7% in 10 wt% saltwater, respectively, and superior salt resistance ability without salt accumulation after 8 h of continuous evaporation (15 wt%). Furthermore, a hydropower cogeneration evaporator device was constructed, and it possesses an open-circuit voltage (VOC) and a maximum output power density of up to 143 mV and 1.33 W m-2 under 1 sun, respectively. This study is expected to provide new ideas for comprehensive utilization of solar energy.
RESUMO
BACKGROUND & AIMS: The colonic epithelium requires continuous renewal by crypt resident intestinal stem cells (ISCs) and transit-amplifying (TA) cells to maintain barrier integrity, especially after inflammatory damage. The diet of high-income countries contains increasing amounts of sugar, such as sucrose. ISCs and TA cells are sensitive to dietary metabolites, but whether excess sugar affects their function directly is unknown. METHODS: Here, we used a combination of 3-dimensional colonoids and a mouse model of colon damage/repair (dextran sodium sulfate colitis) to show the direct effect of sugar on the transcriptional, metabolic, and regenerative functions of crypt ISCs and TA cells. RESULTS: We show that high-sugar conditions directly limit murine and human colonoid development, which is associated with a reduction in the expression of proliferative genes, adenosine triphosphate levels, and the accumulation of pyruvate. Treatment of colonoids with dichloroacetate, which forces pyruvate into the tricarboxylic acid cycle, restored their growth. In concert, dextran sodium sulfate treatment of mice fed a high-sugar diet led to massive irreparable damage that was independent of the colonic microbiota and its metabolites. Analyses on crypt cells from high-sucrose-fed mice showed a reduction in the expression of ISC genes, impeded proliferative potential, and increased glycolytic potential without a commensurate increase in aerobic respiration. CONCLUSIONS: Taken together, our results indicate that short-term, excess dietary sucrose can directly modulate intestinal crypt cell metabolism and inhibit ISC/TA cell regenerative proliferation. This knowledge may inform diets that better support the treatment of acute intestinal injury.
Assuntos
Colite , Açúcares da Dieta , Camundongos , Humanos , Animais , Dextranos , Colite/metabolismo , PiruvatosRESUMO
Developing cost-effective Pt-based electrocatalysts for the hydrogen evolution reaction (HER) is highly urgent. Herein, we report novel electrocatalysts with individually dispersed Pt active sites and tunable Pt-Ni interaction decorated on carbon-wrapped nanotube frameworks (Pt/Ni-DA). Pt/Ni-DA exhibits superior HER performance at low Pt concentrations with an ultralow overpotential of 18 mV at 10 mA cm-2 and an ultrahigh mass activity of 2.13 A mgPt-1 at an overpotential of 50 mV, which is about four times higher than that of commercial Pt/C. X-ray absorption fine structure (XAFS) confirms the extension of Pt from the Ni surface to the Ni bulk phase. Mechanistic research and density functional theory (DFT) calculations collectively reveal that the dispersibility and distribution of Pt atoms in Ni regulate the electronic configuration of Pt sites, optimizing the binding energy of reaction intermediates and facilitating electron transfer during the HER process. This work highlights the importance of the electronic structure alternation through the accommodation effect toward enhanced catalytic performance in HER.
RESUMO
Two-dimensional (2D) ferroelectrics, which are rare in nature, enable high-density nonvolatile memory with low energy consumption. Here, we propose a theory of bilayer stacking ferroelectricity (BSF), in which two stacked layers of the same 2D material, with different rotation and translation, exhibit ferroelectricity. By performing systematic group theory analysis, we find all the possible BSF in all 80 layer groups (LGs) and discover the rules about the creation and annihilation of symmetries in the bilayer. Our general theory can not only explain all the previous findings (including sliding ferroelectricity), but also provide a new perspective. Interestingly, the direction of the electric polarization of the bilayer could be totally different from that of the single layer. In particular, the bilayer could become ferroelectric after properly stacking two centrosymmetric nonpolar monolayers. By means of first-principles simulations, we predict that the ferroelectricity and thus multiferroicity can be introduced to the prototypical 2D ferromagnetic centrosymmetric material CrI_{3} by stacking. Furthermore, we find that the out-of-plane electric polarization in bilayer CrI_{3} is interlocked with the in-plane electric polarization, suggesting that the out-of-plane polarization can be manipulated in a deterministic way through the application of an in-plane electric field. The present BSF theory lays a solid foundation for designing a large number of bilayer ferroelectrics and thus colorful platforms for fundamental studies and applications.
RESUMO
The self-standing graphene membranes are considered as ideal electrode materials for supercapacitors. However, maintaining highly regularized and uniform graphene membranes with satisfied electrochemical performance is still a challenge. Herein, with the chelation of metal cation and the radial shear force introduced by high-speed spinning, the uniform interlayer channels and shrunken cracks between adjacent nanosheets can be achieved in the metal-intercalated graphene oxide (GO) membranes, thus realizing regularization both in normal and radial direction. With the promotion in electron transfer and electrolyte penetration, the iron cross-linked GO membrane with spin coating for 40 cycles exhibits a high specific capacitance (427 F g-1 at 1 A g-1) and rate capability (42.6% capacitance retention from 1 to 40 A g-1), as well as excellent cyclic capability (90.5% capacitance retention after 20,000 cycles). Particularly, a 21% increasement in capacitance can be achieved after high-speed spinning treatment. Moreover, the spin regularization strategy can be extended to GO membranes cross-linked by various multi-valence metal cations, the electrochemical performance of metal-cation cross-linked GO membrane electrodes after high-speed spinning treatment can also be improved obviously. Therefore, this paper provides a novel method to fabricate highly ordered GO membranes with promising electrochemical performance, which presents an immense potential application in membrane materials applied in energy storage, separation and catalysis.
RESUMO
Small-caliber tissue-engineered vascular grafts (TEVGs, luminal diameter <6 mm) are promising therapies for coronary or peripheral artery bypassing surgeries or emergency treatments of vascular trauma, and a robust seed cell source is required for scalable manufacturing of small-caliber TEVGs with robust mechanical strength and bioactive endothelium in future. Human-induced pluripotent stem cells (hiPSCs) could serve as a robust cell source to derive functional vascular seed cells and potentially lead to generation of immunocompatible engineered vascular tissues. Up to date, this rising field of small-caliber hiPSC-derived TEVG (hiPSC-TEVG) research has received increasing attention and achieved significant progress. Implantable, small-caliber, hiPSC-TEVGs have been generated. These hiPSC-TEVGs displayed rupture pressure and suture retention strength approaching to those of human native saphenous veins, with vessel wall decellularized and luminal surface endothelialized with monolayer of hiPSC-endothelial cells. Meanwhile, a series of challenges remain in this field, including functional maturity of hiPSC-derived vascular cells, poor elastogenesis, suboptimal efficiency of obtaining hiPSC-derived seed cells, and relative low ready availability of hiPSC-TEVGs, which are waiting to be addressed. This review is conceived to introduce representative achievements and challenges in small-caliber TEVG generation using hiPSCs, and encapsulate the potential solution and future directions.
Assuntos
Prótese Vascular , Células-Tronco Pluripotentes Induzidas , Humanos , Células Endoteliais , Engenharia TecidualRESUMO
Oxygen vacancies occupation and coordination environment modulation of the transition-metal based electrodes are effective strategies to improve the structural stability and electrochemical performance. In this work, the 2-methylimidazole (2-MI) doped manganese dioxide (MnO2) anchored on carbon cloth (CC) is fabricated via a simple method (MI-MnO2-x/CC), where the oxygen defects on/inside the K+ doped δ-MnO2 nanosheets are in-situ created by reductive ethanol/Mn2+ and occupied by 2-MI ligands. With the pre-embedded K+ ions and abundant ligand-refilled defects, the electronic coordination structure, structural stability and electron/ion diffusion efficiency can be effectively enhanced. Therefore, the MI-MnO2-x/CC reveals a remarkable specific capacitance of 721.2 mF cm-2 with excellent cycle durability (capacitance retention of 93.4% after 10,000 cycles) under 1.3 V operation potential window. In addition, an asymmetric supercapacitor assembled by MI-MnO2-x/CC and activated mechanical exfoliated graphene oxide yields a maximum energy density of 57.0 Wh kg-1 and a highest power density of 23.0 kW kg-1 under 2.3 V. This effective oxygen defect stabilization strategy by ligands refilling can be extended to various metal oxide-based electrodes for energy storage and conversion.
RESUMO
Organic-inorganic multiferroics are promising for the next generation of electronic devices. To date, dozens of organic-inorganic multiferroics have been reported; however, most of them show a magnetic Curie temperature much lower than room temperature, which drastically hampers their application. Here, by performing first-principles calculations and building effective model Hamiltonians, we reveal a molecular orbital-mediated magnetic coupling mechanism in two-dimensional Cr(pyz)2 (pyz = pyrazine) and the role that the valence state of the molecule plays in determining the magnetic coupling type between metal ions. Based on these, we demonstrate that a two-dimensional organic-inorganic room-temperature multiferroic, Cr(h-fpyz)2 (h-fpyz = half-fluoropyrazine), can be rationally designed by introducing ferroelectricity in Cr(pyz)2 while keeping the valence state of the molecule unchanged. Our work not only reveals the origin of magnetic coupling in 2D organic-inorganic systems but also provides a way to design room-temperature multiferroic materials rationally.
RESUMO
Tailoring the porous structure of carbon materials is one essential approach to improve the energy storage performance of carbon-based electrode materials. Herein, hierarchical porous carbons (HPCs) with different meso-structure are synthesized via a one-pot pyrolysis process with SiO2 and ZnCl2 as template and activator, respectively. The energy storage capacities of the obtained HPC samples are investigated as bi-functional electrode both for supercapacitor and LIBs. The results show that different meso-structure of HPCs can effectively affect the energy storage performance. In the range of 15 â¼ 50 nm, smaller size of mesopore can result better electrochemical performance of HPCs. And the optimized HPC sample (HPC-15) manifests high specific capacitance of 432F g-1 and good cyclic stability in the supercapacitor application. When used as anode of LIBs, the HPC-15 presents a high capacity of 820 mAh g-1. In addition, COMSOL simulation is employed to study the effect of pore structure on mass transfer during electrochemical process. The HPC-15 is calculated to have the highest total porosity (εp) and effective diffusivity of K+ (De = 6.776 × 10-10 m2 s-1), thus leading to its best electrochemical performance.
RESUMO
Immune checkpoint inhibitors (ICIs) have revolutionized cancer treatment; however, immune-related adverse events (irAEs) in the gastrointestinal (GI) system commonly occur. In this study, data were obtained from the US Food and Drug Administration adverse event reporting system between July 2014 and December 2020. Colitis, hepatobiliary disorders, and pancreatitis were identified as irAEs in our study. Reporting odds ratio (ROR) with information components (IC) was adopted for disproportionate analysis. A total of 70,330 adverse events were reported during the selected period, 4,075 records of which were associated with ICIs. GI toxicities have been reportedly increased with ICI, with ROR025 of 17.2, 6.7, and 2.3 for colitis, hepatobiliary disorders, and pancreatitis, respectively. The risks of colitis, hepatobiliary disorders, and pancreatitis were higher with anti-CTLA-4 treatment than that with anti-PD-1 (ROR025 2.6, 1.3, and 1.1, respectively) or anti-PD-L1 treatment (ROR025 4.8, 1.3, and 1.3, respectively). Logistic analysis indicated that hepatobiliary disorders and pancreatitis more frequently occurred in female patients (adjusted odds ratio, 1.16 and 1.52; both p < 0.05). Consistently, polytherapy was a strong risk factor for colitis (adjusted odds ratio 2.52, p < 0.001), hepatobiliary disorders (adjusted odds ratio 2.50, p < 0.001), and pancreatitis (adjusted odds ratio 2.29, p < 0.001) according to multivariate logistic analysis. This pharmacovigilance analysis demonstrated an increased risk of all three GI irAEs associated with ICI therapies. The comparative analysis offered supportive insights on selecting GI irAEs for patients treated with ICIs.
RESUMO
Patients with inflammatory bowel disease, psoriasis or other rheumatic diseases treated with corticosteroids, immunomodulators and biologics might face additional risk during COVID-19 epidemic due to their immunocompromised status. However, there was still no unanimous opinion on the use of these therapy during COVID-19 epidemic. Current studies suggested that systemic corticosteroids might increase the risk of hospitalization, as well as risks of ventilation, ICU, and death among patients with immune-mediated inflammatory diseases. Anti-TNF agent was associated with lower rate of hospitalization, as well as lower risks of ventilation, ICU, and death. No significant changes in rates of hospitalization, ventilation, ICU and mortality were observed in patients treated with immunomodulators or biologics apart from anti-TNF agents. The underlying mechanism of these results might be related to pathway of antiviral immune response and cytokine storm induced by SARS-COV-2 infection. Decision on the use of corticosteroids, immunomodulators and biologics should be made after weighing the benefits and potential risks based on individual patients.
Assuntos
Corticosteroides/uso terapêutico , Produtos Biológicos/uso terapêutico , Tratamento Farmacológico da COVID-19 , Síndrome da Liberação de Citocina/tratamento farmacológico , Imunossupressores/uso terapêutico , Doenças Inflamatórias Intestinais/tratamento farmacológico , Psoríase/tratamento farmacológico , Doenças Reumáticas/tratamento farmacológico , SARS-CoV-2/fisiologia , Inibidores do Fator de Necrose Tumoral/uso terapêutico , COVID-19/mortalidade , Síndrome da Liberação de Citocina/mortalidade , Hospitalização , Humanos , Imunidade , Doenças Inflamatórias Intestinais/mortalidade , Psoríase/mortalidade , Doenças Reumáticas/mortalidade , Risco , Análise de SobrevidaRESUMO
Developing highly active water splitting electrocatalysts with ordered micro/nanostructures and uniformly distributed active sites can meet the increasing requirement for sustainable energy storage/utilization technologies. However, the stability of complicated structures and active sites during a long-term process is also a challenge. Herein, we fabricate a novel approach to create sufficient atomic defects via N2 plasma treatment onto parallel aligned NiMoO4 nanosheets, followed by refilling of these defects via heterocation dopants and stabilizing them by annealing. The parallel aligned nanosheet arrays with an open structure and quasi-two-dimensional long-range diffusion channels can accelerate the mass transfer at the electrolyte/gas interface, while the incorporation of Fe/Pt atoms into defect sites can modulate the local electronic environment and facilitate the adsorption/reaction kinetics. The optimized Pt-NP-NMC/CC-5 and Fe-NP-NMC/CC-10 electrodes exhibit low overpotentials of 71 and 241 mV at 10 mA cm-2 for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively, and the assembled device reveals a low voltage of 1.55 V for overall water splitting. This plasma-induced high-efficiency defect engineering and coupled active site stabilization strategy can be extended to large-scale fabrication of high-end electrocatalysts.
RESUMO
Based on their characteristics, transition metal layered double hydroxides have been of great scientific interest for their use in supercapacitors. Up until now, severe aggregation and low intrinsic conductivity have been the major hurdles for their application. In this work, nickel-iron sulfide nanosheets (NiFeSx) and carbon nanotubes (CNTs) were synthesized on diatomite using chemical vapor deposition and a two-step hydrothermal method to overcome these challenges. Synthesis of this composite successfully exploits the synergistic effect of multicomponent materials to improve the electrochemical performance. Diatomite is selected as a substrate to provide preferable surroundings for the uniform dispersion of nanomaterial on its surface, which enlarges the active sites that come in contact with the electrolytes, significantly improving the electrochemical properties. Combined with high conductivity and a synchronous sulfurization effect, the NiFeSx@CNTs@MnS@Diatomite electrode delivered a high specific capacitance of 552F g-1 at a current density of 1 A g-1, a good rate capability of 68.4% retention at 10 A g-1, and superior cycling stability of 89.8% capacitance retention after 5000 cycles at 5 A g-1. Furthermore, an asymmetric supercapacitor assembled via NiFeSx@CNTs@MnS@Diatomite and graphene delivered a maximum energy density of 28.9 Wh kg-1 and a maximum power density of 9375 W kg-1 at a potential of 1.5 V. This research lays the groundwork for ideal material preparation as well as a rational design for the electrode material, including property enhancement of diatomite-based material for use in supercapacitors.
RESUMO
Ionic species are important to dominate phase separation behaviors of poly(N-isopropylacrylamide) (PNIPAm) in aqueous solutions. Herein, photoresponsive azobenzene-based salts with various ions are prepared and their photoresponsive ion effects on clouding temperatures (TcpS ) of PNIPAm in aqueous solutions are explored. It is found that, despite of various structures of anions and cations, trans-TcpS under vis light irradiation are always higher than cis-TcpS under UV irradiation. Particularly, Hofmeister effect of anions on TcpS is roughly observed. For example, azobenzene with kosmotropic CO3 2- gives the lowest cis-Tcp while in use of typical chaotropic anions, such as ClO4 - , azobenzene isomerization less affects values of Tcp s. In another hand, azobenzene-based metallic salts containing lithium, sodium, and potassium cations also demonstrate photoresponsive Hofmeister effect. Trans-metallic azobenzene demonstrates a chaotropic effect on Tcp s while UV induces kosmotropic behaviors on TcpS . Additionally, ionic conduction of the solution along with photoresponsive phase separations is also investigated and PNIPAm aggregations induce a sharp reduction of ion conduction during UV light illumination.
Assuntos
Resinas Acrílicas , Sais , Compostos Azo , CátionsRESUMO
OBJECTIVE: Changes in gut microbiota have been linked to systemic lupus erythematosus (SLE), but knowledge is limited. Our study aimed to provide an in-depth understanding of the contribution of gut microbiota to the immunopathogenesis of SLE. METHODS: Fecal metagenomes from 117 patients with untreated SLE and 52 SLE patients posttreatment were aligned with 115 matched healthy controls and analyzed by whole-genome profiling. For comparison, we assessed the fecal metagenome of MRL/lpr mice. The oral microbiota origin of the gut species that existed in SLE patients was documented by single-nucleotide polymorphism-based strain-level analyses. Functional validation assays were performed to demonstrate the molecular mimicry of newly found microbial peptides. RESULTS: Gut microbiota from individuals with SLE displayed significant differences in microbial composition and function compared to healthy controls. Certain species, including the Clostridium species ATCC BAA-442 as well as Atopobium rimae, Shuttleworthia satelles, Actinomyces massiliensis, Bacteroides fragilis, and Clostridium leptum, were enriched in SLE gut microbiota and reduced after treatment. Enhanced lipopolysaccharide biosynthesis aligned with reduced branched chain amino acid biosynthesis was observed in the gut of SLE patients. The findings in mice were consistent with our findings in human subjects. Interestingly, some species with an oral microbiota origin were enriched in the gut of SLE patients. Functional validation assays demonstrated the proinflammatory capacities of some microbial peptides derived from SLE-enriched species. CONCLUSION: This study provides detailed information on the microbiota of untreated patients with SLE, including their functional signatures, similarities with murine counterparts, oral origin, and the definition of autoantigen-mimicking peptides. Our data demonstrate that microbiome-altering approaches may offer valuable adjuvant therapies in SLE.
Assuntos
Autoanticorpos/imunologia , Autoantígenos/imunologia , Microbioma Gastrointestinal/imunologia , Lúpus Eritematoso Sistêmico/microbiologia , Mimetismo Molecular/imunologia , Actinobacteria , Actinomyces , Adulto , Aminoácidos de Cadeia Ramificada/biossíntese , Animais , Antirreumáticos/uso terapêutico , Bacteroides fragilis , Estudos de Casos e Controles , Clostridiales , Clostridium , Modelos Animais de Doenças , Feminino , Microbioma Gastrointestinal/genética , Humanos , Lipopolissacarídeos/biossíntese , Lúpus Eritematoso Sistêmico/tratamento farmacológico , Lúpus Eritematoso Sistêmico/imunologia , Lúpus Eritematoso Sistêmico/fisiopatologia , Masculino , Metagenômica , Camundongos , Camundongos Endogâmicos MRL lpr , Boca/microbiologia , Polimorfismo de Nucleotídeo Único , Adulto JovemRESUMO
A rational design of electrode materials with both high electron conductivity and abundant of catalytic sites is essential for high-performance electrochemical reactions. Herein, a nitrogen and sulfur co-doped graphene (SNG) anchored on the interconnected conductive graphite foam (GF) is fabricated via drop-casting and in situ annealing. The SNG flakes are tightly immobilized on the GF surface, which can provide fast electron transfer rate and large electrolyte/electrode interfaces. The SNG@GF composite can be directly used as a free-standing electrode for electro-catalytic degradation of organic pollutants and overall water splitting. SNG@GF significantly enhanced the electrochemical activation of peroxymonosulfate (PMS) for catalytic oxidation. During the oxygen evolution reaction (OER), the SNG@GF exhibits an initial overpotential of 330 mV vs. RHE at 10 mA cm-2 with a Tafel slope of 149 mV dec-1 in 1 M KOH, which outperforms most of the reported metal-free catalysts. The density functional theory calculations are also used to unveil the S, N dual doping effects of carbon materials and their synergy in carbocatalysis. This study dedicates to developing multi-functional carbocatalysts for environmental and energy applications, and enables insights into carbocatalysis in electrochemistry.