1D Cu(I)-based chiral organic-inorganic hybrid material with second harmonic generation and circular polarized luminescence.

In recent years, organic-inorganic hybrid materials have demonstrated exceptional performance in nonlinear optics, attracting widespread attention. However, there are relatively few examples of coordination compounds synthesized with Cu as the metal center that exhibit excellent nonlinear optical properties. In this study, we successfully synthesized a pair of enantiomers named R/S-Cu2I2 by reacting chiral ligands with CuI. The crystal structure reveals a one-dimensional copper-iodide chain structure built by Cu2I2 clusters, and its ordered arrangement in space provides not only a strong second harmonic generation (SHG) signal (1.24 × KDP) but also a large birefringence (0.15@1064 nm). Under excitation at 395 nm, the crystals exhibit red fluorescence peaked at 675 nm. The CD spectra of R/S-Cu2I2 show a distinct mirror-symmetric Cotton effect, and their CPL signals are corresponding and opposite in the emission range, with a maximum glum of approximately ±2.5 × 10-3. Theoretical calculations using density functional theory were also carried out to enhance our understanding of the correlation between their structures and optical properties.

Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density.

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2. This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

Halogen-Modulated 2D Coordination Polymers for Efficient Hydrogen Peroxide Photosynthesis under Air and Pure Water Conditions.

H2 O2 is a widely used eco-friendly oxidant and a potential energy carrier. Photocatalytic H2 O2 production from water and O2 is an ideal approach with the potential to address the current energy crisis and environmental issues. Three zig-zag two-dimensional coordination polymers (2D CPs), named CuX-dptz, were synthesized by a rapid and facile method at room temperature, showing preeminent H2 O2 photoproduction performance under pure water and open air without any additives. CuBr-dptz exhibits a H2 O2 production rate high up to 1874 µmol g-1 h-1 , exceeding most reported photocatalysts under this condition, even comparable to those supported by sacrificial agents and O2 . The coordination environment of Cu can be modulated by halogen atoms (X=Cl, Br, I), which in turn affects the electron transfer process and finally determines the reaction activity. This is the first time that 2D CPs have been used for photocatalytic H2 O2 production in such challenging conditions, which provides a new pathway for the development of portable in situ H2 O2 photosynthesis devices.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework.

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

Fabrication of Porous Tantalum with Low Elastic Modulus and Tunable Pore Size for Bone Repair.

Porous tantalum (Ta) is a potential bone substitute due to its excellent biocompatibility and desirable mechanical properties. In this work, a series of porous Ta materials with interconnected micropores and varying pore sizes from 23 to 210 µm were fabricated using spark plasma sintering. The porous structure was formed by thermal decomposition of ammonium bicarbonate powder premixed in the Ta powder. The pore size and porosity were controlled by the categorized particle size of ammonium bicarbonate. The porous Ta has elastic moduli in the range of 2.1-3.2 GPa and compressive yield strength in the range of 23-34 MPa, which are close to those of human bone. In vitro, as-fabricated porous Ta demonstrates excellent biocompatibility by supporting adhesion and proliferation of preosteoblasts. In vivo studies also validate its bone repair capability after implantation in a rat femur defect model. The study demonstrates a facile strategy to fabricate porous Ta with controllable pore size for bone repair.

Optimizing Acetylene Sorption through Induced-fit Transformations in a Chemically Stable Microporous Framework.

Developing practical storage technologies for acetylene (C2 H2 ) is important but challenging because C2 H2 is useful but explosive. Here, a novel metal-organic framework (MOF) (FJI-H36) with adaptive channels was prepared. It can effectively capture C2 H2 (159.9 cm3 cm-3 ) at 1 atm and 298 K, possessing a record-high storage density (561 g L-1 ) but a very low adsorption enthalpy (28 kJ mol-1 ) among all the reported MOFs. Structural analyses show that such excellent adsorption performance comes from the synergism of active sites, flexible framework, and matched pores; where the adsorbed-C2 H2 can drive FJI-H36 to undergo induced-fit transformations step by step, including deformation/reconstruction of channels, contraction of pores, and transformation of active sites, finally leading to dense packing of C2 H2 . Moreover, FJI-H36 has excellent chemical stability and recyclability, and can be prepared on a large scale, enabling it as a practical adsorbent for C2 H2 . This will provide a useful strategy for developing practical and efficient adsorbents for C2 H2 storage.

Effects of Shu Bu Wenshen Guchang recipe on intestinal injury and the TLR4/NF-κB signaling pathways in mice with irinotecan-induced delayed-type diarrhea.

Background: Irinotecan (also known as CPT-11) is a topoisomerase I inhibitor that is primarily used for the treatment of advanced colorectal cancer. CPT-11 and its active metabolite SN-38 can directly damage intestinal mucosal cells. In addition, CPT-11 can activate the Toll-like receptor 4 (TLR4) inflammasome/nuclear factor kappa-B p65 (NF-κB p65) pathway, ultimately leading to intestinal inflammation-related injury. Shu Bu Wenshen Guchang recipe (SBWGR) has the spleen and kidneys. Herein, we investigated the effects of SBWGR on intestinal injury and the TLR4/NF-κB signaling pathways in mice with CPT-11-induced delayed-type diarrhea, aiming to provide evidence for the treatment of CPT-11-induced delayed-type diarrhea. Methods: Thirty tumor-bearing mice were divided into normal control, model control, octreotide, low dose SBWGR, and high dose SBWGR groups, with 6 mice in each group. After successful modelling of delayed diarrhea, the normal and model control groups were given equal amounts of saline for 5 consecutive days, and the other three groups gave the corresponding intra-drug administration. Body weight, tumor size, Chiu score, intestinal ischemia and reperfusion injury, and disease activity index (DAI) were recorded in each group. The levels of intestinal interleukin-1ß (IL-1ß), IL-18, and tumor necrosis factor-α (TNF-α) were measured by an enzyme-linked immunosorbent assay (ELISA). Intestinal TLR4 and NF-κB p65 levels were measured by reverse transcription-polymerase chain reaction (RT-PCR) and protein blotting. Results: The weight of octreotide and kidney was higher than the control group (P<0.05); The tumor volume comparison of the model control group, octreotide group, warm kidney intestine low dose group, and warm kidney intestine high dose group were not significantly different (P>0.05). Octreotide group, intestinal Chiu score, diarrhea score, DAI level, intestinal inflammatory cytokines, IL-1ß, IL-18 and TNF-α intestinal level, intestinal TLR4, NF-κB p65 mRNA protein expression levels were significantly lower than those of the model control group (P<0.05), and the amount of the treatment group was increased (P<0.05). Conclusions: SBWGR exerts a prominent protective effect on intestinal damage caused by CPT-11-induced delayed-type diarrhea, which may be achieved by inhibiting the activation of the intestinal TLR4/NF-κB signaling pathway.

Adaptive coordination assemblies based on a flexible tetraazacyclododecane ligand for promoting carbon dioxide fixation.

Coordination hosts based on flexible ligands have received increasing attention due to their inherent adaptive cavities that often show induced-fit guest binding and catalysis like enzymes. Herein, we report the controlled self-assembly of a series of homo/heterometallic coordination hosts (Me4enPd)2n (ML) n [n = 2/3; M = Zn(ii)/Co(ii)/Ni(ii)/Cu(ii)/Pd(ii)/Ag(i); Me4en: N,N,N',N'-tetramethylethylenediamine] with different shapes (tube/cage) from a flexible tetraazacyclododecane-based pyridinyl ligand (L) and cis-blocking Me4enPd(ii) units. While the Ag(i)-metalated ligand (AgL) gave rise to the formation of a (Me4enPd)4(ML)2-type cage, all other M(ii) ions led to isostructural (Me4enPd)6(ML)3-type tubular complexes. Structural transformations between cages and tubes could be realized through transmetalation of the ligand. The buffering effect on the ML panels endows the coordination tubes with remarkable acid-base resistance, which makes the (Me4enPd)6(ZnL)3 host an effective catalyst for the CO2 to CO3 2- conversion. Control experiments suggested that the integration of multiple active Zn(ii) sites on the tubular host and the perfect geometry match between CO3 2- and the cavity synergistically promoted such a conversion. Our results provide an important strategy for the design of adaptive coordination hosts to achieve efficient carbon fixation.

Achieving gas pressure-dependent luminescence from an AIEgen-based metal-organic framework.

Materials exhibiting aggregation-induced emission (AIE) behaviour enable strong emission in solid state and can respond to various external stimuli, which may facilitate the development of materials for optical sensing, bioimaging or optoelectronic devices. Herein, we use an AIE luminogen 2',5'-diphenyl-[1,1':4',1"-terphenyl]-4,4"-dicarboxylic acid as the ligand to prepare an AIEgen-based MOF (metal-organic framework) named FJI-H31. FJI-H31 exhibits bright luminescence under ambient conditions (under air and at room temperature), but almost no emission is observed under vacuum. Our investigation shows that the emission intensity displays a smooth and reversible enhancement with increased gas pressure, which may be attributed to the restriction of intramolecular motion brought by structural deformation under pressure stimulus. Unlike most pressure-responsive MOFs, the luminescence reverts to its original state once gas pressure recovers. By virtue of its unique optical properties, a luminescent MOF with sensing ability of gas-pressure is realized.

White-Light Emission and Circularly Polarized Luminescence from a Chiral Copper(I) Coordination Polymer through Symmetry-Breaking Crystallization.

Achieving white-light emission, especially white circularly polarized luminescence (CPL) from a single-phase material is challenging. Herein, a pair of chiral CuI coordination polymers (1-M and 1-P) have been prepared by the asymmetrical assembly of achiral ligands and Cu2 I2 clusters. The compounds display dual emission bands and can be used as single-phase white-light phosphors, achieving a "warm"-white-light-emitting diode with an ultra-high color rendering index (CRI) of 93.4 and an appropriate correlated color temperature (CCT) of 3632 K. Meanwhile, corresponding CPL signals with maximum dissymmetry factor |glum |=8×10-3 have been observed. Hence, intrinsic white-light emission and CPL have been realized simultaneously in coordination polymers for the first time. This work gains insight into the nature of chiral assembly from achiral units and offers a prospect for the development of single-phase white-CPL materials.

Construction of a Stable Lanthanide Metal-Organic Framework as a Luminescent Probe for Rapid Naked-Eye Recognition of Fe3+ and Acetone.

Four lanthanide metal-organic frameworks (Ln-MOFs), namely {[Me2NH2][LnL]·2H2O}n (Ln = Eu 1, Tb 2, Dy 3, Gd 4), have been constructed from a new tetradentate ligand 1-(3,5-dicarboxylatobenzyl)-3,5-pyrazole dicarboxylic acid (H4L). These isostructural Ln-MOFs, crystallizing in the monoclinic P21/c space group, feature a 3D structure with 7.5 Å × 9.8 Å channels along the b axis and the point symbol of {410.614.84} {45.6}2. The framework shows high air and hydrolytic stability, which can keep stable after exposed to humid air for 30 days or immersed in water for seven days. Four MOFs with different lanthanide ions (Eu3+, Tb3+, Dy3+, and Gd3+) ions exhibit red, green, yellow, and blue emissions, respectively. The Tb-MOF emitting bright green luminescence can selectively and rapidly (<40 s) detect Fe3+ in aqueous media via a fluorescence quenching effect. The detection shows excellent anti-inference ability toward many other cations and can be easily recognized by naked eyes. In addition, it can also be utilized as a rapid fluorescent sensor to detect acetone solvent as well as acetone vapor. Similar results of sensing experiments were observed from Eu-MOF. The sensing mechanism are further discussed.

Functionalized Metal-Organic Frameworks for Hg(II) and Cd(II) Capture: Progresses and Challenges.

Mercury and cadmium are deemed to be the most harmful heavy metal ions for elimination due to their persistent bio-accumulative and bio-expanding toxic effects. Although many technologies have been developed for capturing Hg(II) and Cd(II) ions from aqueous solution, developing efficient and practical capature technology remains a big challenge. Metal-organic frameworks (MOFs) have been considered as the most promising adsorbents for Hg(II) and Cd(II) removal due to their high porosity and easy functionalization, and various of MOF-based adsorbents based on different synthetic strategies have been prepared and studied. In this article, the progresses of MOF-based absorbents for Hg(II) and Cd(II) capture are described according to the synthetic strategies and the types of functional groups, and the comparison and practical analysis of various adsorbents are also presented.

Induction of Chirality in a Metal-Organic Framework Built from Achiral Precursors.

Induction of chirality from an achiral assembly system remains a huge challenge related to the origin of life. Here, induction of chirality in a metal-organic framework (MOF) built from achiral precursors has been realized. Assembling achiral H3 BTB ligands and ZnII /CdII clusters leads to a 2D coordination polymer (FJI-H16), while introduction of achiral pyridine into such assembly system leads to a 3D chiral MOF (FJI-H27 (M) or (P)). The driven force for chiral generation has been proved to be a pyridine participated kinetic-control assembly process, which can be controlled by changing the amount of pyridine and temperature, from no induction to partial induction to complete induction. The chiral generation process has been identified in detail through a pyridine-involved key intermediate (FJI-H28). The targeted modification of pyridine can selectively lead to FJI-H27 (M) or FJI-H27 (P), making the chiral orientation and distribution of bulk FJI-H27 samples can be controlled. Our work not only represents a new chiral induction process that may relate to the chiral origin in nature, but also firstly reveals how achiral external stimuli generate chirality from achiral precursors, and offers a guide for rational preparation of chiral MOFs.

Introduction of Flexibility into a Metal-Organic Framework to Promote Hg(II) Capture through Adaptive Deformation.

The development of a practical Hg(II) adsorbent is highly important for both environmental protection and public health. Herein, an adaptive metal-organic framework (MOF; FJI-H30) has been prepared from a highly flexible ligand [tris(pyridin-4-ylmethyl)amine] and Co(SCN)2 with cheap Hg(II) adsorption sites (SCN- groups) that not only has excellent chemical stability but also can capture Hg(II) from aqueous solution with high adsorption capacity (705 mg g-1). Moreover, it also has good anti-interference ability and can be used repeatedly and large-scale prepared. Further researches demonstrate that the relatively high Hg(II) adsorption capacity originates from the adsorbed Hg(II)-induced deformation of FJI-H30, and such an adaptive deformation will reduce the potential repulsive forces between the adsorbed Hg(II) ions, enabling almost all Hg(II) absorption sites to adsorb Hg(II) ions. Finally, how to induce the deformation of FJI-H30 by adsorbed Hg(II) also has been studied in detail. Our work not only provides a practical Hg(II) adsorbent for wastewater treatment but also offers a novel strategy for the design of novel MOFs for efficient heavy-metal-ion removal.

Exploring the surface-to-volume ratio in ultrasmall nanocrystals using the optical probe of Eu3+ ion.

We demonstrate fine control of the nanocrystal size of ultrasmall Eu3+-doped Sc2O3 nanocrystals within an extremely small nanometer scale from 2.6 to 9.7 nm, thereby enabling us to thoroughly investigate the size-dependent surface-to-volume ratio in these ultrasmall NCs using an optical probe of the red-emitting Eu3+ ion for the first time.

Acid-Base-Resistant Metal-Organic Framework for Size-Selective Carbon Dioxide Capture.

The development of practical porous materials for the selective capture of CO2 from flue gas and crude biogas is highly critical for both environment protection and energy safety. Here, a novel metal-organic framework (FJI-H29) has been prepared, which not only has excellent acid-base resistance but also possesses polar micropores (3.4-4.3 Å) that can match CO2 molecules well. FJI-H29 can selectively capture CO2 from N2 and CH4 with excellent separation efficiency and suitable adsorption enthalpy under ambient conditions. Breakthrough experiments further confirm its practicability for both CO2/N2 and CO2/CH4 separation. All of these confirm FJI-H29 is a practical CO2 adsorbent. Modeling calculations reveal that the confinement effect of micropores and the polar environment synergistically promotes the selective adsorption of CO2, which will provide a potential strategy for the synthesis of a practical metal-organic framework for CO2 capture.

Biodegradable Inorganic Upconversion Nanocrystals for In Vivo Applications.

Lanthanide-doped inorganic upconversion nanocrystals (UCNCs) are promising as fluorescent diagnostic and therapeutic agents for in vivo applications ranging from biological imaging to disease theranostics. However, all currently available lanthanide-doped inorganic UCNCs are not biodegradable and thus cannot be harmlessly eliminated from the body of living organism during a reasonable period of time, making their clinical translations nearly impossible. Here, we report a class of red-emitting biodegradable UCNCs based on Yb3+/Er3+-doped inorganic potassium heptafluozirconate (K3ZrF7:Yb/Er) that features a dynamically "soft" crystal lattice containing water-soluble [ZrF7]3- cluster and a K+ cation. The red-emitting K3ZrF7:Yb/Er UCNCs exhibit a pH-dependent biodegradation capability upon exposure to water both in vitro and in vivo, and the rapid biodegradation rate, monitored using the intrinsic red upconversion luminescence, can be tuned particularly in a mild acidic tumor microenvironment (pH ∼5-6). More importantly, the final biodegradation products of K3ZrF7:Yb/Er UCNCs can be excreted from the body of mice in a short period of time with no evidence of toxicity, in stark contrast to the nondegradable ß-NaYF4:Yb/Er UCNCs that primarily accumulate in the main organs of mice. These findings described here unambiguously would benefit the future biomedical applications and clinical translations of lanthanide-doped inorganic UCNCs.

Peasecod-Like Hollow Upconversion Nanocrystals with Excellent Optical Thermometric Performance.

Trivalent lanthanide (Ln3+)-doped hollow upconversion nanocrystals (UCNCs) usually exhibit unique optical performance that cannot be realized in their solid counterparts, and thus have been receiving tremendous interest from their fundamentals to diverse applications. However, all currently available Ln3+-doped UCNCs are solid in appearance, the preparation of hollow UCNCs remains nearly untouched hitherto. Herein, a class of UCNCs based on Yb3+/Er3+-doped tetralithium zirconium octafluoride (Li4ZrF8:Yb/Er) featuring 2D layered crystal lattice is reported, which makes the fabrication of hollow UCNCs with a peasecod-like shape possible after Ln3+ doping. By employing the first-principle calculations, the unique peasecod-like hollow nanoarchitecture primarily associated with the hetero-valence Yb3+/Er3+ doping into the 2D layered crystal lattice of Li4ZrF8 matrix is revealed. Benefiting from this hollow nanoarchitecture, the resulting Li4ZrF8:Yb/Er UCNCs exhibit an abnormal green upconversion luminescence in terms of the population ratio between two thermally coupled states (2H11/2 and 4S3/2) of Er3+ relative to their solid Li2ZrF6:Yb/Er counterparts, thereby allowing to prepare the first family of hollow Ln3+-doped UCNCs as supersensitive luminescent nanothermometer with almost the widest temperature sensing range (123-800 K). These findings described here unambiguously pave a new way to fabricate hollow Ln3+-doped UCNCs for numerous applications.

Constructing multi-cluster copper(i) halides using conformationally flexible ligands.

Three unprecedented multi-cluster copper(i) halides (MCCHs) have been assembled using conformationally flexible ligands. Further explorations demonstrate that the conformational compliance of the ligands may be the key to trap and stabilize the various copper(i)-halide clusters in one system, which opens a new way for the construction of multi-Cu(i)-cluster complexes. Moreover, the MCCHs show distinctive temperature-dependent photoluminescence.

Electric-Field Assisted In†Situ Hydrolysis of Bulk Metal-Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution.

Facile preparation of low-cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal-organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs (FJI-H25Fe and FJI-H25FeCo), only the metastable FJI-H25FeCo bulk can immediately transform into FeCo-oxyhydroxides nanosheets through electric-field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo-oxyhydroxides nanosheets has been investigated in detail. The as-made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm-2 , a relatively small Tafel slope of 42 mV dec-1 , and long-term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low-cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.