RESUMO
Owing to good flexibility, prominent mechanical properties, three-dimensional (3D) nanofibrous structure and low background interference, sustainable bacterial nanocellulose (BNC) is a highly attractive matrix material for surface-enhanced Raman scattering (SERS) sensor. Herein, a highly sensitive, flexible and scalable silver nanorod-decorated BNC (AgNRs@BNC) SERS sensor is developed by a simple vacuum-assisted filtration. The AgNRs were firmly locked in the 3D nanofibrous network of cellulose nanofibers upon vacuum drying process, resulting in the formation of 3D SERS hotspots with a depth of more than 10 µm on the sensor. With 4-aminothiophenol (4-ATP) as a target molecule, a lowest distinguishable level of 10-12 M and a high enhancement factor of 1.1 × 109 were realized by the optimal AgNRs1.5@BNC SERS sensor. Moreover, the AgNRs@BNC SERS sensor exhibits high detectable level of 10-9 M for thiram molecules by integrating with a portable Raman spectrometer. Besides, toxic thiram residues on grape surface could be directly on-site identified by the combination of AgNRs@BNC SERS sensors and a portable Raman spectrometer through a feasible press-and-peel method. The flexible AgNRs@BNC SERS sensor cooperated with portable Raman system demonstrates great potential for on-site detection of pesticide residues on irregular food surfaces.
Assuntos
Celulose , Nanotubos , Resíduos de Praguicidas , Prata , Análise Espectral Raman , Análise Espectral Raman/métodos , Prata/química , Celulose/química , Nanotubos/química , Resíduos de Praguicidas/análise , Tiram/análise , Compostos de Anilina/química , Compostos de Sulfidrila/química , Compostos de Sulfidrila/análise , Bactérias , Vitis/química , Limite de DetecçãoRESUMO
A lightweight, portable, low-cost, and accessible cotton swab was employed as surface enhanced Raman spectroscopy (SERS) matrix template. The silver nanoflowers were in situ grown on the surface of cotton swabs to form three-dimensional Ag nanoflower@cotton swabs (AgNF@CS) SERS substrate with high-density and multi-level hot spots. The SERS performance of AgNFs@CS substrates with various reaction time was systematically studied. The optimal AgNF-120@CS SERS substrate exhibits superior detection sensitivity of 10-10 M for methylene blue, good signal reproducibility, high enhancement factor of 1.4 × 107, and excellent storage stability (over 30 days). Moreover, the AgNF-120@CS SERS substrate also exhibits prominent detection sensitivity of 10-8 M for food colorant of carmine. Besides, the portable AgNF-120@CS SERS substrate is also capable of detecting food colorant residues on irregular food surfaces.
Assuntos
Corantes de Alimentos , Nanopartículas Metálicas , Carmim , Prata/química , Reprodutibilidade dos Testes , Nanopartículas Metálicas/químicaRESUMO
While polyethylene terephthalate (PET) has enjoyed widespread use, a large volume of plastic waste has also been produced as a result, which is detrimental to the environment. Traditional treatment of plastic waste, such as landfilling and incinerating waste, causes environmental pollution and poses risks to public health. Recycling PET waste into useful chemicals or upcycling the waste into high value-added materials can be remedies. This review first provides a brief introduction of the synthesis, structure, properties, and applications of virgin PET. Then the conversion process of waste PET into high value-added materials for different applications are introduced. The conversion mechanisms (including degradation, recycling and upcycling) are detailed. The advanced applications of these upgraded materials in energy storage devices (supercapacitors, lithium-ion batteries, and microbial fuel cells), and for water treatment (to remove dyes, heavy metals, and antibiotics), environmental remediation (for air filtration, CO2 adsorption, and oil removal) and catalysis (to produce H2, photoreduce CO2, and remove toxic chemicals) are discussed at length. In general, this review details the exploration of advanced technologies for the transformation of waste PET into nanostructured materials for various applications, and provides insights into the role of high value-added waste products in sustainability and economic development.
Assuntos
Recuperação e Remediação Ambiental , Nanoestruturas , Polietilenotereftalatos/química , Dióxido de Carbono , Reciclagem , Plásticos/químicaRESUMO
Aramid nanofibers (ANFs) as an innovative nanoscale building block exhibit great potential for novel high-performance multifunctional membranes attributed to their extraordinary performance. However, the application of aramid nanofibers in the field of surface enhanced Raman scattering (SERS) sensing has been rarely reported. In this work, aramid nanofibers derived from commercial Kevlar fibers were synthesized by a facile dimethyl sulfoxide/potassium hydroxide (DMSO/KOH) solution treatment. The monodispersed silver nanoparticle-decorated aramid nanofiber (m-Ag@ANF) membranes were constructed by an efficient vacuum filtration technique. Taking advantages of unique intrinsic properties of ANF, the m-Ag@ANF substrates exhibit good flexibility, excellent mechanical properties and prominent thermal stability. Besides, due to the abundance of positively charged amino-group on the ANF substrates, the negatively charged m-AgNPs were uniformly and firmly deposited on the surface of ANF substrate through electrostatic interactions. As a result, the optimal flexible m-Ag-9@ANF SERS substrate exhibits high sensitivity of 10-9 M for methylene blue (MB) and excellent signal reproducibility (RSD = 6.37 %), as well as outstanding signal stability (up to 15 days). Besides, the 2D Raman mapping and FDTD simulations further reveal prominent signal homogeneity and strong electric field distribution for flexible m-Ag-9@ANF SERS substrate. Finally, it is demonstrated that the flexible m-Ag-9@ANF SERS substrate can also be used for detection of toxic molecules on irregular surfaces by a feasible paste-and-read process. The m-Ag@ANF paper exhibits potential applications as a flexible, low-cost, robust and stable SERS sensing platform for trace detection of toxic materials.
RESUMO
The advancement of smart textiles has resulted in significant development in wearable textile sensors and offers novel interfaces to sense physical movements in daily life. Knitting, as a traditional textile fabrication method, is being used in promising ways to realize fully seamless fabrication and unobtrusive sensing in wearable textile applications. However, current flat-knitted sensors can sense strain only in the horizontal plane. This research presents a novel fully machine-knitted spacer piezoresistive sensor structure with a three-directional sensing ability that can detect both the pressure in the vertical direction and the strain in the warp/weft direction. Besides, it can sense the pressure under 1 kPa, which is critical in comfortable on-body interaction, one-piece integration, and wearable applications. Three sizes spacer-knitted sensors are evaluated in terms of their mechanical performance, stability cycles, and reaction to external factors such as sweat, laundering, etc. Then, the effect of material choice on sensor performance is evaluated and the rationale behind the use of different materials is summarized. Specifically, this research presents a detailed evaluation of the applications with both a single sensor and multiple sensor arrays for fine and gross motion sensing in several scenarios. The testing results demonstrate a fully machine-knitted piezoresistive sensor that can detect multidirectional motions (vertical, warp, and weft directions). In addition, this knitted sensor is scalable and can be facilely and seamlessly integrated into any garment piece. This universal knitted sensor structure could be made with a wide variety of materials for high sensitivity for multidirectional strain/pressure sensing, making it a high-compatibility sensor structure for wearable applications.
RESUMO
The MXene-based transition metal oxide composite is a potential candidate for photocatalysts. Rod-like pseudohexagonal phase Nb2O5/Nb2CTx composites were synthesized by a simple hydrothermal oxidation of 2D layered Nb2CTx. The Nb2O5/Nb2CTx composites show superior photocatalytic activity for 98.5% of degradation of Rhodamine B (RhB) for 120 min and 91.2% of tetracycline hydrochloride (TC-HCl) for 180 min under visible light irradiation. The Schottky junction is formed between Nb2O5 nanorods and Nb2CTx and the photo-generated carriers are effectively separated, enhancing the photocatalytic activity of the Nb2O5/Nb2CTx. High photoactivity and cycle stability of Nb2O5/Nb2CTx composites indicate that hydrothermal oxidation of 2D layered Nb2CTx is an alternative to prepare efficient photocatalyst for degradation of organic pollutants.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Catálise , Luz , Nióbio , Tomografia Computadorizada por Raios XRESUMO
Conventionally, surface-enhanced Raman spectroscopy (SERS)-active materials mainly include nanosized noble metals, semiconductors, or the complex of both, most of which are limited in practical applications because of their symbiotic materials, complex and difficult to control fabrication processes, and reuse and sampling challenges. To address these issues, novel SERS substrates have been developed in this study by anchoring zeolitic imidazolate framework-67 (ZIF-67) and derivatives of ZIF-67 to cotton fabric. The designed SERS substrates show extraordinary flexibility, an excellent enhancement factor, and reusable performance. By adjusting the lowest unoccupied molecular orbital and highest occupied molecular orbital of ZIF-67 through a doping process with different metal ions, the substrates exhibit a high enhancement factor of 6.07 × 106 and a low limit of detection of 10-8 M, as well as reusability resulting from photocatalysis. The enhancement process is studied based on charge transfer resonance, interband transition resonance, ground state charge transfer, and the light coupling effect. The results contribute to the approaches in designing SERS substrates by using ZIFs as unique SERS-active materials, and provide new insights into the development of novel SERS-active materials, along with promoting the use of SERS detection in the real world by improving the flexibility of substrates.
Assuntos
Escherichia coli/isolamento & purificação , Teoria Quântica , Staphylococcus aureus/isolamento & purificação , Zeolitas/química , Tamanho da Partícula , Análise Espectral Raman , Propriedades de SuperfícieRESUMO
Wound dressings are an important element in promoting the healing of wounds. Electrospun fibrous materials have a highly porous structure and controllable antibacterial activity and are therefore popular as potential wound dressings. However, electrospun fibrous wound dressings are usually conveniently packaged for immediate use but cannot accommodate irregularly shaped wounds, and their misuse runs the risk of causing a secondary injury to the wound. To overcome these issues, in situ electrospun zein/thyme essential oil (TEO) nanofibrous membranes are proposed as a potential type of wound dressing and applied for wound management through an in situ electrospinning process, which uses a portable electrospinning device. The as-spun zein/TEO membranes show high gas permeability up to 154 ± 20.9 m2/s and superhydrophilicity with a 0° contact angle. With the addition of TEO, good antibacterial effects are also imparted onto the membrane to prevent infection. Moreover, the in situ electrospinning can directly deposit the zein/TEO membranes onto the site of the wound to accommodate the shape of the wound with increased convenience and perceived comfort. Experiments carried out on mice suggest that the in situ electrospun zein/TEO membrane greatly promotes the wound healing process within 11 days. The study results, therefore, suggest that wound dressings in the form of in situ electrospun zein/TEO membranes can be used to facilitate wound healing.
RESUMO
In this study, a biodegradable silk fibroin/poly(lactic-co-glycolic acid)/graphene oxide (SF/PLGA/GO) microfiber mat was successfully fabricated via electrospinning for use in protective fabrics. The morphology of the microfiber mat was characterized by Scanning Electron Microscope (SEM). The thermal and mechanical properties, water contact angle, surface area and pore size of the microfiber mats were characterized. Due to the introduction of graphene which can interact with silk fibroin, the SF/PLGA/GO microfiber mat, compared with the silk fibroin/poly (lactic-co-glycolic acid) (SF/PLGA) microfiber mat, has higher strength, greater Young's modulus and better thermal stability which can meet the requirements of protective fabric. The microfiber mat is biodegradable because its main component is silk fibroin and PLGA. In particular, the microfiber mat has a small pore size range of 4 â¼ 10â¯nm in diameter, a larger surface area of 2.63â¯m2â¯g-1 and pore volume of 7.09â¯×â¯10-3â¯cm3â¯g-1. The small pore size of the mat can effectively block the particulate pollutants and pathogenic particles in the air. The larger surface area and pore volume of the mat are effective for breathability. Therefore, the fabricated SF/PLGA/GO microfiber mat has great application potentials for protective fabrics.
Assuntos
Materiais Biocompatíveis/química , Fibroínas/química , Grafite/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Têxteis , Técnicas Eletroquímicas , Teste de MateriaisRESUMO
Paper-based relics, which are an important part of cultural heritage worldwide, are at risk of imminent damage from various environmental sources. To protect them, the atmospheric pressure plasma polymerization of hexamethyldisiloxane (HMDSO) precursor has been explored on paper-based relics in situ. The macro and micro images taken during this process suggest that the in situ plasma treatment does not change the macro morphology and the micro structure of the treated paper-based relic samples. On the other hand, plasma treatment causes the polymerization of the HMDSO which then produces nanoparticles deposited onto the paper-based relics. These nanoparticles provide good waterproof properties with large static water contact angles and smaller rolling angles, which protect the paper-based relics from water penetration. Moreover, since the nanoparticles are deposited onto the fibers, waterproof fastness is ensured. Also, the examined mechanical properties of the treated and untreated paper-based relics indicate that the atmospheric pressure plasma treatment does not affect the strength of the paper very much. The results in this study show that atmospheric pressure plasma treatment with the use of HMDSO precursor is a good method to preserve paper-based relics.
RESUMO
A practical method for preparing multifunctional polypropylene (PP) nonwoven fabrics with excellent stability and durability was explored. First, the PP nonwoven fabric was sputtered by a magnetron sputtering system to form an Ag film on the surface of the fabric. Subsequently, the coated fabric was treated with dopamine. The fabrics were characterized by scanning electron microscopy (SEM), an energy dispersive spectrometer (EDS), electrical conductivity, electromagnetic interference shielding effectiveness (EMI SE), antibacterial activity, stability, and laundering durability. The results of the study revealed that the fabric was coated with Ag, and after the treatment with dopamine, the surfaces of Ag-coated fibers were coated with polydopamine (PDA). The fabrics still had a sheet resistance below ~15 Ω/sq and exhibited excellent EMI SE above ~25 dB, though few differences existed from the single Ag-coated sample. After the treatment with dopamine, the antibacterial activity of the fabric was enhanced. Meanwhile, the treated samples exhibited excellent resistance against sodium sulfide corrosion, which could enhance the stability of the Ag-coated fabric. Moreover, the laundering durability of the treated fabric was improved in the same process, whose lowest sheet resistance was ~18 Ω/sq and the EMI SE was ~8 dB more than single Ag-coated PP nonwoven fabrics. In conclusion, this method was considered to be effective in fabricating multifunctional, stable, and durable fabrics.
RESUMO
Silver nanoparticles were synthesized under microwave irradiation, a facile and efficient way, using dandelion extract as reducing and capping agents. The as-synthesized silver nanoparticles/Dandelion compounds (AgNPs/Dandelion) were characterized by field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), Zeta potential and ultraviolet visible (UV-vis) spectroscopy. The catalytic degradation activity of AgNPs/Dandelion for Methyl orange (MO) and Rhodamine B (RhB) in the presence of NaBH4 were recorded by UV-vis spectroscopy. AgNPs/Dandelion exhibit excellent catalytic degradation activity for RhB and MO with rate constants of 0.1038 s-1 and 0.0393 s-1, respectively.
RESUMO
In textile reactive dyeing, dyed fabrics have to be rinsed in the wash-off step several times to improve colorfastness. Thus, the multiple rinsing processes drastically increase the freshwater consumption and meanwhile generate massive waste rinsing effluents. This paper addresses an innovative alternative to recycle the waste effluents to minimize freshwater consumption in the wash-off step. Accordingly, catalytic ozonation with a highly effective catalyst has been applied to remedy the waste rinsing effluents for recycling. The carbon aerogel (CA) hosted bimetallic hybrid material (Agâ»Fe2O3@CA) was fabricated and used as the catalyst in the degradation of residual dyes in the waste rinsing effluents by ozonation treatments. The results indicate the participation of Agâ»Fe2O3@CA had strikingly enhanced the removal percentage of chemical oxidation demand by 30%. In addition, it has been validated that waste effluents had been successfully reclaimed after catalytic ozonation with Agâ»Fe2O3@CA. They could be additionally reused to reduce freshwater consumption in the wash-off step, but without sacrificing the color quality of corresponding fabrics in terms of color difference and colorfastness. This study may be the first to report the feasibility of catalytic ozonation in minimization of freshwater consumption in the wash-off step in textile reactive dyeing.
RESUMO
An efficient technology for preparing lotus fibres under microwave irradiation was developed. The lotus fibres were characterized by scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffraction and thermogravimetry. Lotus fibres prepared are a kind of hollow fibres which are composed of a superfine fibre and an external shell. The effect of the treatment time with hydrogen peroxide under microwave irradiation on components, whiteness, moisture regain, removal rate of impurities, fineness, tensile strength and breaking elongation of lotus fibres was investigated. The results show that the cellulose content in lotus fibres increases with increase in treatment time. Whiteness and moisture regain of lotus fibres increase with increase in treatment time with hydrogen peroxide. The removal rate of impurities and the fineness of lotus fibres are improved after they are treated with hydrogen peroxide. Microwave irradiation is supposed to be an efficient method for producing lotus fibres.
RESUMO
Gold nanorods exhibit rich colours owing to the nearly linear dependence of the longitudinal plasmon resonance wavelength on the length-to-diameter aspect ratio. This property of Au nanorods has been utilized in this work for dyeing fabrics. Au nanorods of different aspect ratios were deposited on both cotton and silk fabrics by immersing them in Au nanorod solutions. The coating of Au nanorods makes the fabrics exhibit a broad range of colours varying from brownish red through green to purplish red, which are essentially determined by the longitudinal plasmon wavelength of the deposited Au nanorods. The colorimetric values of the coated fabrics were carefully measured for examining the colouring effects. The nanorod-coated cotton fabrics were found to be commercially acceptable in washing fastness to laundering tests and colour fastness to dry cleaning tests. Moreover, the nanorod-coated cotton and silk fabrics show significant improvements on both UV-protection and antibacterial functions. Our study therefore points out a promising approach for the use of noble metal nanocrystals as dyeing materials for textile applications on the basis of their inherent localized plasmon resonance properties.