Synergistic modulation of the d-band center in Ni3S2 by selenium and iron for enhanced oxygen evolution reaction (OER) and urea oxidation reaction (UOR).

Efficient production of green hydrogen energy is crucial in addressing the energy crisis and environmental concerns. The oxygen evolution reaction (OER) poses a challenge in conventional overall water electrolysis due to its slow thermodynamically process. Urea oxidation reaction (UOR) offers an alternative anodic oxidation method that is highly efficient and cost-effective, with favorable thermodynamics and sustainability. Recently, there has been limited research on bifunctional catalysts that exhibit excellent activity for both OER and UOR reactions. In this study, we developed a selenium and iron co-doped nickel sulfide (SeFe-Ni3S2) catalyst that demonstrated excellent Tafel slopes of 53.9 mV dec-1 and 16.4 mV dec-1 for OER and UOR, respectively. Density Functional Theory (DFT) calculations revealed that the introduction of metal (iron) and nonmetallic elements (selenium) was found to coordinate the d-band center, resulting in improved adsorption/desorption energies of the catalysts and reduced the overpotentials and limiting potentials for OER and UOR, respectively. This activity enhancement can be attributed to the altered electronic coordination structure after the introduction of selenium (Se) and iron (Fe), leading to an increase in the intrinsic activity of the catalyst. This work offers a new strategy for bifunctional catalysts for OER and UOR, presenting new possibilities for the future development of hydrogen production and novel energy conversion technologies. It contributes towards the urgent search for technologies that efficiently produce green hydrogen energy, providing potential solutions to mitigate the energy crisis and protect the environment.

In Situ Construction of Built-In Opposite Electric Field Balanced Surface Adsorption for Hydrogen Evolution Reaction.

Achieving a balance between H-atom adsorption and binding with H2 desorption is crucial for catalyzing hydrogen evolution reaction (HER). In this study, the feasibility of designing and implementing built-in opposite electric fields (OEF) is demonstrated to enable optimal H atom adsorption and H2 desorption using the Ni3(BO3)2/Ni5P4 heterostructure as an example. Through density functional theory calculations of planar averaged potentials, it shows that opposite combinations of inward and outward electric fields can be achieved at the interface of Ni3(BO3)2/Ni5P4, leading to the optimization of the H adsorption free energy (ΔGH*) near electric neutrality (0.05 eV). Based on this OEF concept, the study experimentally validated the Ni3(BO3)2/Ni5P4 system electrochemically forming Ni3(BO3)2 through cyclic voltammetry scanning of B-doped Ni5P4. The surface of Ni3(BO3)2 undergoes reconstruction, as characterized by Grazing Incidence Wide-Angle X-ray Scattering (GIWAXS) and in situ Raman spectroscopy. The resulting catalyst exhibits excellent HER activity in alkaline media, with a low overpotential of 33 mV at 10 mA cm-2 and stability maintained for over 360 h. Therefore, the design strategy of build-in opposite electric field enables the development of high-performance HER catalysts and presents a promising approach for electrocatalyst advancement.

Boosting Electrocatalytic Carbon Dioxide Reduction via Self-Relaxation of Asymmetric Coordination in Fe-Based Single Atom Catalyst.

Addressing the limitations arising from the consistent catalytic behavior observed for various intermediates during the electrochemical carbon dioxide reduction reaction (CO2 RR) poses a significant challenge in the optimization of catalytic activity. In this study, we aimed to address this challenge by constructing an asymmetric coordination Fe single atom catalyst (SCA) with a dynamically evolved structure. Our catalyst, consisting of a Fe atom coordinated with one S atom and three N atoms (Fe-S1 N3 ), exhibited exceptional selectivity (CO Faradaic efficiency of 99.02 %) and demonstrated a high intrinsic activity (TOF of 7804.34 h-1 ), and remarkable stability. Using operando XAFS spectra and Density Functional Theory (DFT) calculations, we elucidated the self-relaxation of geometric distortion and dynamic evolution of bond lengths within the catalyst. These structure changes enabled independent regulation of the *COOH and *CO intermediate adsorption energies, effectively breaking the linear scale relationship and enhancing the intrinsic activity of CO2 RR. This study provides valuable insights into the dynamic evolution of SACs and paves the way for targeted catalyst designs aimed to disrupt the linear scaling relationships.

Atomic Dispersed Hetero-Pairs for Enhanced Electrocatalytic CO2 Reduction.

Electrochemical carbon dioxide reduction reaction (CO2RR) involves a variety of intermediates with highly correlated reaction and ad-desorption energies, hindering optimization of the catalytic activity. For example, increasing the binding of the *COOH to the active site will generally increase the *CO desorption energy. Breaking this relationship may be expected to dramatically improve the intrinsic activity of CO2RR, but remains an unsolved challenge. Herein, we addressed this conundrum by constructing a unique atomic dispersed hetero-pair consisting of Mo-Fe di-atoms anchored on N-doped carbon carrier. This system shows an unprecedented CO2RR intrinsic activity with TOF of 3336 h-1, high selectivity toward CO production, Faradaic efficiency of 95.96% at - 0.60 V and excellent stability. Theoretical calculations show that the Mo-Fe diatomic sites increased the *COOH intermediate adsorption energy by bridging adsorption of *COOH intermediates. At the same time, d-d orbital coupling in the Mo-Fe di-atom results in electron delocalization and facilitates desorption of *CO intermediates. Thus, the undesirable correlation between these steps is broken. This work provides a promising approach, specifically the use of di-atoms, for breaking unfavorable relationships based on understanding of the catalytic mechanisms at the atomic scale.

Oxygen-regulated carbon quantum dots as an efficient metal-free electrocatalyst for nitrogen reduction.

An electrocatalytic nitrogen reduction reaction under ambient conditions provides a wonderful blueprint for the conversion of nitrogen to ammonia. However, current research on ammonia synthesis is mainly focused on metal-based catalysts. It is still a great challenge to realize the effective activation of N2 on non-metallic catalysts. Herein, carbon quantum dots are reported to reduce dinitrogen to ammonia under ambient conditions. Benefiting from its numerous defect sites, this metal-free catalyst shows excellent catalytic performance in 0.1 M HCl with a faradaic efficiency of 17.59%. In addition, both experimental and theoretical results confirm that the catalytic performance of the catalyst can be improved by appropriately controlling the oxygen content of samples at different temperatures, and the utmost ammonia yield is 134.08 µg h-1 mg-1cat., which is almost three times higher than that of a reported metal-free material. The proposed oxygen regulation provides a new method to optimize the surface properties of metal-free catalysts for ammonia synthesis.

Ti3C2Tx MXene-derived TiO2/C-QDs as oxidase mimics for the efficient diagnosis of glutathione in human serum.

Nanozyme-based colorimetry was suggested to be a rapid method for biomarker (e.g. glutathione) detection, but this method suffers from lack of efficiency and low-toxicity nanozymes till now. Herein, quantum dots of TiO2 loaded on carbon (TiO2/C-QDs) oxidase-like nanozymes were prepared via a hydrothermal treatment of tiny and few-layered Ti3C2Tx MXene nanosheets, which possess abundant thermodynamic metastable Ti atoms on MXene margins as raw materials for the preparation of TiO2/C-QDs. The oxygen vacancy in TiO2 on the surface of the carbon matrix can facilitate O2 adsorption in the solution and generate reactive oxygen species (ROS), thereby quickly oxidizing 3,3',5,5'-tetramethylbenzidine (TMB) to its oxidized form (TMBox) in the absence of H2O2. After adding glutathione (GSH), TMBox was able to be restored to TMB, which resulted in a corresponding decrease in the UV-vis absorbance value at 652 nm. Furthermore, this assay possesses good selectivity, excellent specificity and high sensitivity (limit of detection: 0.2 µM), which made it possible to efficiently detect GSH in complex biological samples such as human serum.

Ultra-efficient electromagnetic wave absorption with ethanol-thermally treated two-dimensional Nb2CTx nanosheets.

Nb2CTx, an emerging type of MXene, should be a promising electromagnetic wave (EMW) absorbing material to overcome the EMW pollution nowadays due to its unique layered structure and extremely thin monolayer thickness, but was lack of systematic study till now. Meanwhile, Nb2CTx nanosheets obtained upon HF etching of Nb2AlC MAX was unfortunately found with limited absorption performance due to its mainly dielectric loss mechanism herein. Therefore, the Nb2CTx nanosheets were further treated with solvothermal strategy in various solvents. As a result, the absorption performance of the as-treated Nb2CTx nanosheets could be significantly improved, while the ones in ethanol showed much more superior absorption capability, especially in the low-frequency band (2.0-4.0 GHz). The minimum reflection loss value could reach -52.2 dB at 3.93 GHz with the thickness of only 2.90 mm, indicating more than 99.999% EMW was absorbed. These should be due to the multi-loss mechanism including dielectric, interfacial, and multiple reflection ones resulting from the enlarged interlayer spacing, and increased surface functional groups on the Nb2CTx nanosheets upon the ethanol-based solvothermal treatment.