Self-induced matrix with Li-ion storage activity in ultrathin CuMnO2 nanosheets electrode.

Conversion anode materials such as Mn3O4 draw much attention due to their considerable theoretical capacity for lithium-ion batteries (LIBs). However, poor conductivity, slow solid-state Li-ion diffusion, and huge volume expansion of the active materials during charge/discharge lead to unsatisfied electrochemical performance. Despite several strategies like nanocrystallization, fabricating hierarchical nanostructures, and introducing a matrix are valid to address these crucial issues, the achieved electrochemical performance still needs to be further enhanced. What is worse, the matrix with less or no Li-ion storage activity may lower the achieved capacity of the electrodes. Herein, ultra-thin CuMnO2 nanosheets with the thickness of 5-8 nm were evaluated for LIBs. The ultra-thin sheet-like nanostructure offers sufficient contact areas with electrolyte and shortens the Li-ion diffusion distance. Moreover, the in-situ generated Mn and Cu along with their oxides could play the role of matrix and conductive agent in turn at different stages, relieving the stress brought by volume expansion. Therefore, the as-prepared ultra-thin CuMnO2 nanosheets electrode displays a remarkable reversible capacity, long cycling stability, and outstanding rate capability (a reversible capacity of 1160.5 mAh g-1 at 0.1A g-1 was retained after 100 cycles with a capacity retention of 95.1 %, and 717.8 mAh g-1 at 2.0 A g-1 after 400 cycles).

Heterostructure engineering of ultrathin SnS2/Ti3C2Tx nanosheets for high-performance potassium-ion batteries.

Layered metal sulfides are considered as promising candidates for potassium ion batteries (KIBs) owing to the unique interlayer passages for ion diffusion. However, the insufficient electronic conductivity, inevitable volume expansion, and sulfur loss hinder the promotion of K-ion storage performance. Herein, few-layered Ti3C2Tx nanosheets were selected as the multi-functional substrate for cooperating few-layered SnS2 nanosheets, constructing SnS2/Ti3C2Tx hetero-structural nanosheets (HNs) with the thickness as thin as about 5 nm. In this configuration, the formed Ti-S bonds provide robust interaction between SnS2 and Ti3C2Tx nanosheets, which hinders the agglomeration of SnS2 and the restack of Ti3C2Tx, endowing the hybrid material with robust nanostructure. Thus, the shortcomings of the SnS2 anode are muchly relieved. In this way, the as-prepared SnS2/Ti3C2Tx HNs electrode delivers reversible capacities of 462.1 mAh g-1 at 0.1 A g-1 and 166.1 mAh g-1 at 2.0 A g-1, respectively, and a capacity of 85.5 mAh g-1 is remained even after 460 cycles at 2.0 A g-1. These results are superior to those of the counterpart electrode, confirming aggressive promotion of K-ion storage performance of SnS2 anode brought by the cooperation of Ti3C2Tx, and presenting a reliable strategy to improve the electrochemical performance of sulfide anodes.

Stimulating the Reversibility of Sb2 S3 Anode for High-Performance Potassium-Ion Batteries.

Conversion-alloy sulfide materials for potassium-ion batteries (KIBs) have attracted considerable attention because of their high capacities and suitable working potentials. However, the sluggish kinetics and sulfur loss result in their rapid capacity degeneration as well as inferior rate capability. Herein, a strategy that uses the confinement and catalyzed effect of Nb2 O5 layers to restrict the sulfur species and facilitate them to form sulfides reversibly is proposed. Taking Sb2 S3 anode as an example, Sb2 S3 and Nb2 O5 are dispersed in the core and shell layers of carbon nanofibers (C NFs), respectively, constructing core@shell structure Sb2 S3 -C@Nb2 O5 -C NFs. Benefiting from the bi-functional Nb2 O5 layers, the electrochemical reversibility of Sb2 S3 is stimulated. As a result, the Sb2 S3 -C@Nb2 O5 -C NFs electrode delivers the rapidest K-ion diffusion coefficient, longest cycling stability, and most excellent rate capability among the controlled electrodes (347.5 mAh g-1 is kept at 0.1 A g-1 after 100 cycles, and a negligible capacity degradation (0.03% per cycle) at 2.0 A g-1 for 2200 cycles is delivered). The enhanced K-ion storage properties are also found in SnS2 -C@Nb2 O5 -C NFs electrode. Encouraged by the stimulated reversibility of Sb2 S3 and SnS2 anodes, other sulfides with high electrochemical performance also could be developed for KIBs.

Engineering the Core-Shell-Structured NCNTs-Ni2Si@Porous Si Composite with Robust Ni-Si Interfacial Bonding for High-Performance Li-Ion Batteries.

A new strategy has been innovatively proposed for wrapping the Ni-incorporated and N-doped carbon nanotube arrays (Ni-NCNTs) on porous Si with robust Ni-Si interfacial bonding to form the core-shell-structured NCNTs-Ni2Si@Si. The hierarchical porous silicon core was first fabricated via a novel self-templating synthesis route based on two crucial strategies: in situ thermal evaporation of crystal water from the perlite for producing porous SiO2 and subsequent magnesiothermic reduction of porous SiO2 into porous Si. Ni-NCNTs were subsequently constructed based on the Ni-catalyzed tip-growth mechanism and were further engineered to fully wrap the porous Si microparticles by forming the Ni2Si alloy at the heterojunction interface. When the prepared NCNTs-Ni2Si@Si was evaluated as the anode material for Li-ion batteries, the hierarchical porous system in the Si core and the rich void spaces in carbon nanotube arrays contributed to the remarkable accommodation of volume expansion of Si as well as the significant increase of Li+ diffusion and Si utilization. Moreover, the Ni2Si alloy, which chemically linked the Ni-NCNTs and porous Si, not only provided good electronic contact between the Si core and carbon shell but also effectively prevented the CNTs' detachment from the Si core during cycling. The multifunctional structural design rendered the whole electrode highly stable and active in Li storage, and the electrochemically active NCNTs-Ni2Si@Si electrode delivered a high reversible capacity of 1547 mAh g-1 and excellent cycling stability (85% capacity retention after 600 discharge-charge cycles) at a current density of 358 mA g-1 (0.1 C) as well as good rate performance (778 mAh g-1 at 2 C), showing great potential as an efficient and stable anode for high energy density Li-ion batteries.

Strategic Design of Vacancy-Enriched Fe1- xS Nanoparticles Anchored on Fe3C-Encapsulated and N-Doped Carbon Nanotube Hybrids for High-Efficiency Triiodide Reduction in Dye-Sensitized Solar Cells.

A new class of hybrids with the unique electrocatalytic nanoarchitecture of Fe1- xS anchored on Fe3C-encapsulated and N-doped carbon nanotubes (Fe1- xS/Fe3C-NCNTs) is innovatively synthesized through a facile one-step carbonization-sulfurization strategy. The efficient synthetic protocols on phase structure evolution and dynamic decomposition behavior enable the production of the Fe1- xS/Fe3C-NCNT hybrid with advanced structural and electronic properties, in which the Fe vacancy-contained Fe1- xS showed the 3d metallic state electrons and an electroactive Fe in +2/+3 valence, and the electronic structure of the CNT was effectively modulated by the incorporated Fe3C and N, with the work function decreased from 4.85 to 4.63 eV. The meticulous structural, electronic, and compositional control unveils the unusual synergetic catalytic properties for the Fe1- xS/Fe3C-NCNT hybrid when developed as counter electrodes (CEs) for dye-sensitized solar cells (DSSCs), in which the Fe3C- and N-incorporated CNTs with reduced work function and increased charge density provide a highway for electron transport and facilitate the electron migration from Fe3C-NCNTs to ultrahigh active Fe1- xS with the electron-donating effect, and the Fe vacancy-enriched Fe1- xS nanoparticles exhibit ultrahigh I3- adsorption and charge-transfer ability. As a consequence, the DSSC based on the Fe1- xS/Fe3C-NCNT CE delivers a high power conversion efficiency of 8.67% and good long-term stability with a remnant efficiency of 8.00% after 168 h of illumination, superior to those of traditional Pt. Furthermore, the possible catalytic mechanism toward I3- reduction is creatively proposed based on the structure-activity correlation. In this work, the structure engineering, electronic modulation, and composition control opens up new possibilities in constructing the novel electrocatalytic nanoarchitecture for highly efficient CEs in DSSCs.

Phosphonate-Stabilized Titanium-Oxo Clusters with Ferrocene Photosensitizer: Structures, Photophysical and Photoelectrochemical Properties, and DFT/TDDFT Calculations.

The metal-to-core charge transfer (MCCT) transition in sensitized titanium-oxo clusters is an important process for photoinduced electron injection in photovoltaic conversion. This process resembles most closely the Type II photoinjection in dye-sensitized solar cells. Herein we report the synthesis and photophysical and photoelectrochemical (PEC) properties of the phosphonate-stabilized titanium-oxo clusters containing the ferrocenecarboxylate ligands. These ferrocene-containing clusters exhibit intense visible absorption extended up to 600 nm along with low optical band gaps of ∼2.2 eV. The low-energy transitions of these clusters were systematically investigated by UV-vis spectroscopy and DFT/TDDFT calculations. The combined experimental and computational studies suggest that the ferrocenecarboxylate-substituted titanium-oxo clusters form a donor-acceptor (D-A) system. The low-energy transition of these clusters primarily involves the MCCT from the iron center to TiO cluster core. The TiO core structure and phosphonate ligands both have great influence on the PEC properties of the clusters. This work provides valuable examples for the sensitized titanium-oxo clusters in which electron injection takes place via MCCT transition.

A 4-dimethylaminobenzoate-functionalized Ti6-oxo cluster with a narrow band gap and enhanced photoelectrochemical activity: a combined experimental and computational study.

Organic donor-π-bridge-acceptor (D-π-A) dyes with arylamines as an electron donor have been widely used as photosensitizers for dye-sensitized solar cells (DSSCs). However, titanium-oxo clusters (TOCs) functionalized with this kind of D-π-A structured dye-molecule have rarely been explored. In the present study, the 4-dimethylaminobenzoate-functionalized titanium-oxo cluster [Ti6(µ3-O)6(OiPr)6(DMABA)6]·2C6H5CH3 (DMABA = 4-dimethylaminobenzoate) was synthesized and structurally characterized by single-crystal X-ray diffraction. For comparison, two other Ti6-oxo clusters, namely [Ti6(µ3-O)6(OiPr)6(AD)6] (AD = 1-adamantanecarboxylate) and [Ti6(µ3-O)2(µ2-O)(µ2-OiPr)4(OiPr)10(DMM)2] (DMM = dimethylmalonate), were also studied. The DMABA-functionalized cluster exhibits a remarkably reduced band gap of ∼2.5 eV and much enhanced photocurrent response in comparison with the other two clusters. The electronic structures and electronic transitions of the clusters were studied by DFT and TDDFT calculations. The computational results suggest that the low-energy transitions of the DMABA-functionalized cluster have a substantial charge-transfer character arising from the DMABA → {Ti6} cluster core ligand-to-core charge transfer (LCCT), along with the DMABA-based intra-ligand charge transfer (ILCT). These low-energy charge transfer transitions provide efficient electron injection pathways for photon-to-electron conversion.

A ferrocenecarboxylate-functionalized titanium-oxo-cluster: the ferrocene wheel as a sensitizer for photocurrent response.

Sensitized titanium-oxo clusters (TOCs) have attracted growing interest. However, reports on TOCs incorporated with a metal complex as photosensitizers are still very rare. In the present work, the organometallic complex ferrocene was used as a sensitizer for a titanium-oxo cluster. A ferrocenecarboxylate-substituted titanium-oxo cluster [Ti6(µ3-O)6(OiPr)6(O2CFc)6] (Fc = ferrocenyl) was synthesized and structurally characterized, in which the ferrocene wheel performs as a sensitizer for photocurrent response. For comparison, naphthalene-sensitized titanium-oxo clusters [Ti6(µ3-O)6(OiPr)6(NA)6] (NA = 1-naphthoate) and [Ti6(µ3-O)6(OiPr)6(NAA)6] (NAA = 1-naphthylacetate) with the same {Ti6} core structure were also synthesized. The structures, optical behaviors, electronic states and photoelectrochemical properties of these sensitized {Ti6} clusters were investigated. It is demonstrated that the introduction of ferrocene groups into the titanium-oxo cluster significantly reduces the band gap and enhances the photocurrent response in comparison with the naphthalene-sensitized clusters. The substantially reduced band gap of the ferrocene-sensitized cluster was attributed to the introduction of Fe(ii) d-d transitions and the possible contribution from the Fc → {Ti6} charge transfer. For the naphthalene-sensitized clusters, the better electronic coupling between the dye and the {Ti6} core in the 1-naphthoate (NA) substituted cluster results in higher photoelectrochemical activity.

General Strategy for Controlled Synthesis of NixPy/Carbon and Its Evaluation as a Counter Electrode Material in Dye-Sensitized Solar Cells.

Hydrothermal treatment of nickel acetate and phosphoric acid aqueous solution followed with a carbothermal reduction assisted phosphorization process using sucrose as the carbon source for the controlled synthesis of NixPy/C was successfully realized for the first time. The critical synthesis factors, including reduction temperature, phosphorus/nickel ratio, pH, and sucrose amount were systematically investigated. Remarkably, the carbon serves as a reducer and plays a determinative role in the transformation of Ni2P2O7 into Ni2P/C. The synthesis strategy is divided into four distinguishable stages: (1) hydrothermal preparation of Ni3(PO4)2·8H2O precursor for stabilizing P sources; (2) dimerization of Ni3(PO4)2·8H2O into more thermal stable Ni2P2O7 amorphous phase along with the generation of NiO; (3) carbothermal reduction and phosphidation of NiO into NixPy (0 ≤ y/x ≤ 0.5); and (4) further phosphidation of mixed-phase NixPy and carbothermal reduction of Ni2P2O7 into single-phase Ni2P. The resultant Ni2P, the highly active phase in electrocatalysis, was applied as counter electrode in a dye-sensitized solar cell (DSSC). The DSSC based on Ni2P with 10.4 wt.% carbon delivers a power conversion efficiency of 9.57%, superior to that of state-of-the-art Pt-based cell (8.12%). The abundant Niδ+ and Pδ- active sites and the metal-like conductivity account for its outstanding catalytic performance.

Enhanced sensing of dopamine in the present of ascorbic acid based on graphene/poly(p-aminobenzoic acid) composite film.

Graphene/p-aminobenzoic acid composite film modified glassy carbon electrode (Gr/p-ABA/GCE) was first employed for the sensitive determination of dopamine (DA). The electrochemical behavior of DA at the modified electrode was investigated by cyclic voltametry (CV), differential pulse voltametry (DPV) and amperometric curve. The oxidation peak currents of DA increased dramatically at Gr/p-ABA/GCE. The modified electrode was used to electrochemically detect dopamine (DA) in the presence of ascorbic acid (AA). The Gr/p-ABA composite film showed excellent electrocatalytic activity for the oxidation of DA in phosphate buffer solution (pH 6.5). The peak separation between DA and AA was large up to 220 mV. Using DPV technique, the calibration curve for DA determination was obtained in the range of 0.05-10 µM. The detection limit for DA was 20 nM. AA did not interfere with the determination of DA because of the very distinct attractive interaction between DA cations and the negatively Gr/p-ABA composite film. The proposed method exhibited good stability and reproducibility.

Spectrofluorimetric determination of glutathione in human plasma by solid-phase extraction using graphene as adsorbent.

An efficient solid phase extraction-spectrofluorimetric method using graphene as adsorbent was developed to sensitively determine glutathione (GSH) in biological samples. Fluorescent probe N-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-yl)methyl)iodoacetamide (BODIPY Fl-C1-IA) was applied for the derivatization of GSH. The procedure was based on BODIPY Fl-C1-IA selective reaction with GSH to form highly fluorescent product BODIPY Fl-C1-IA-GSH, its extraction to the graphene-packed SPE cartridge and spectrofluorimetric determination. Some factors affecting the extraction efficiency, such as the type of the eluent and its volume, sample pH, extraction time, and sample volume were optimized. Comparative studies were also performed between graphene and other adsorbents including C18 silica, graphitic carbon, and multi-walled carbon nanotubes for the extraction of analyte. The calibration graph using the pretreatment system for GSH was linear over the range of 0.5-200 nM. The limit of detection was 0.01 nM (signal-to-noise ratio=3). Relative standard deviation for six replicate determinations of GSH at 80 nM concentration level was lower than 5.0%. The developed method was applied to the determination of GSH in human plasma with recoveries of 92-108%. This work revealed the great potentials of graphene as an excellent sorbent material in the analysis of biological samples.

Hydrothermal preparation and electrochemical sensing properties of TiO(2)-graphene nanocomposite.

A facile hydrothermal method has been developed and shown to be effective for the preparation of TiO(2)-graphene nanocomposite. The as-prepared nanocomposite was characterized using FT-IR spectroscopy, powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The TiO(2)-graphene modified glassy carbon electrode (GCE) exhibited remarkable electron transfer kinetics and electrocatalytic activity toward the oxidation of dopamine (DA). Furthermore, the oxidation of common interfering agent such as ascorbic acid (AA) was significantly suppressed at this modified electrode, which resulted in good selectivity and sensitivity for electrochemical sensing of DA. These results demonstrate that the TiO(2)-graphene hybrid material has promising potential applications in electrochemical sensors and biosensors design.