Realization of Multiple Synapse Plasticity by Coexistence of Volatile and Nonvolatile Characteristics of Interface Type Memristor.

Studies on neuromorphic computing systems are becoming increasingly important in the big-data-processing era as these systems are capable of energy-efficient parallel data processing and can overcome the present limitations owing to the von Neumann bottleneck. The Pt/WOx/ITO resistive random-access memory device can be used to implement versatile synapse functions because it possesses both volatile and nonvolatile characteristics. The gradual increase and decrease in the current of the Pt/WOx/ITO device with its uniform resistance state for endurance and retention enables additional synaptic applications that can be controlled using electric pulses. If the volatile and nonvolatile device properties are set through rehearsal and forgetting processes, the device can emulate various synaptic behaviors, such as potentiation and depression, paired-pulse facilitation, post-tetanic potentiation, image training, Hebbian learning rules, excitatory postsynaptic current, and Pavlov's test. Furthermore, reservoir computing can be implemented for applications such as pattern generation and recognition. This emphasizes the various applications of future neuromorphic devices, demonstrating the various favorable characteristics of pulse-enhanced Pt/WOx/ITO devices.

Implementation of Artificial Synapse Using IGZO-Based Resistive Switching Device.

In this study, we present the resistive switching characteristics and the emulation of a biological synapse using the ITO/IGZO/TaN device. The device demonstrates efficient energy consumption, featuring low current resistive switching with minimal set and reset voltages. Furthermore, we establish that the device exhibits typical bipolar resistive switching with the coexistence of non-volatile and volatile memory properties by controlling the compliance during resistive switching phenomena. Utilizing the IGZO-based RRAM device with an appropriate pulse scheme, we emulate a biological synapse based on its electrical properties. Our assessments include potentiation and depression, a pattern recognition system based on neural networks, paired-pulse facilitation, excitatory post-synaptic current, and spike-amplitude dependent plasticity. These assessments confirm the device's effective emulation of a biological synapse, incorporating both volatile and non-volatile functions. Furthermore, through spike-rate dependent plasticity and spike-timing dependent plasticity of the Hebbian learning rules, high-order synapse imitation was done.

Improved Resistive Switching Characteristics and Synaptic Functions of InZnO/SiO2 Bilayer Device.

This paper investigates the bipolar resistive switching and synaptic characteristics of IZO single-layer and IZO/SiO2 bilayer two-terminal memory devices. The chemical properties and structure of the device with a SiO2 layer are confirmed by x-ray photoemission spectroscopy (XPS) and transmission electron microscopy (TEM) imaging. The device with the SiO2 layer showed better memory characteristics with a low current level, as well as better cell-to-cell and cycle-to-cycle uniformity. Moreover, the neuromorphic applications of the IZO/SiO2 bilayer device are demonstrated by pulse response. Paired pulse facilitation, excitatory postsynaptic current, and pulse-width-dependent conductance changes are conducted by the coexistence of short- and long-term memory characteristics. Moreover, Hebbian rules are emulated to mimic biological synapse function. The result of potentiation, depression, spike-rate-dependent plasticity, and spike-time-dependent plasticity prove their favorable abilities for future applications in neuromorphic computing architecture.

The Enhanced Performance of Neuromorphic Computing Hardware in an ITO/ZnO/HfOx/W Bilayer-Structured Memory Device.

This study discusses the potential application of ITO/ZnO/HfOx/W bilayer-structured memory devices in neuromorphic systems. These devices exhibit uniform resistive switching characteristics and demonstrate favorable endurance (>102) and stable retention (>104 s). Notably, the formation and rupture of filaments at the interface of ZnO and HfOx contribute to a higher ON/OFF ratio and improve cycle uniformity compared to RRAM devices without the HfOx layer. Additionally, the linearity of potentiation and depression responses validates their applicability in neural network pattern recognition, and spike-timing-dependent plasticity (STDP) behavior is observed. These findings collectively suggest that the ITO/ZnO/HfOx/W structure holds the potential to be a viable memory component for integration into neuromorphic systems.

Improved Resistive and Synaptic Characteristics in Neuromorphic Systems Achieved Using the Double-Forming Process.

In this study, we investigate the electrical properties of ITO/ZrOx/TaN RRAM devices for neuromorphic computing applications. The thickness and material composition of the device are analyzed using transmission electron microscopy. Additionally, the existence of TaON interface layers was confirmed using dispersive X-ray spectroscopy and X-ray photoelectron analysis. The forming process of the ZrOx-based device can be divided into two categories, namely single- and double forming, based on the initial lattice oxygen vacancies. The resistive switching behaviors of the two forming methods are compared in terms of the uniformity properties of endurance and retention. The rationale behind each I-V forming process was determined as follows: in the double-forming method case, an energy band diagram was constructed using F-N tunneling; conversely, in the single-forming method case, the ratio of oxygen vacancies was extracted based on XPS analysis to identify the conditions for filament formation. Subsequently, synaptic simulations for the applications of neuromorphic systems were conducted using a pulse scheme to achieve potentiation and depression with a deep neural network-based pattern recognition system to display the achieved recognition accuracy. Finally, high-order synaptic plasticity (spike-timing-dependent plasticity (STDP)) is emulated based on the Hebbian rule.

Amorphous BN-Based Synaptic Device with High Performance in Neuromorphic Computing.

The von Neumann architecture has faced challenges requiring high-fulfillment levels due to the performance gap between its processor and memory. Among the numerous resistive-switching random-access memories, the properties of hexagonal boron nitride (BN) have been extensively reported, but those of amorphous BN have been insufficiently explored for memory applications. Herein, we fabricated a Pt/BN/TiN device utilizing the resistive switching mechanism to achieve synaptic characteristics in a neuromorphic system. The switching mechanism is investigated based on the I-V curves. Utilizing these characteristics, we optimize the potentiation and depression to mimic the biological synapse. In artificial neural networks, high-recognition rates are achieved using linear conductance updates in a memristor device. The short-term memory characteristics are investigated in depression by controlling the conductance level and time interval.

Artificial Synapse Emulated by Indium Tin Oxide/SiN/TaN Resistive Switching Device for Neuromorphic System.

In this paper, we fabricate an ITO/SiN/TaN memristor device and analyze its electrical characteristics for a neuromorphic system. The device structure and chemical properties are investigated using transmission electron microscopy and X-ray photoelectron spectroscopy. Uniform bipolar switching is achieved through DC sweep under a compliance current of 5 mA. Also, the analog reset phenomenon is observed by modulating the reset voltage for long-term memory. Additionally, short-term memory characteristics are obtained by controlling the strength of the pulse response. Finally, bio-inspired synaptic characteristics are emulated using Hebbian learning rules such as spike-rate-dependent plasticity (SRDP) and spike-timing-dependent plasticity (STDP). As a result, we believe that the coexistence of short-term and long-term memories in the ITO/SiN/TaN device can provide flexibility in device design in future neuromorphic applications.

Improved Uniformity of TaOx-Based Resistive Switching Memory Device by Inserting Thin SiO2 Layer for Neuromorphic System.

RRAM devices operating based on the creation of conductive filaments via the migration of oxygen vacancies are widely studied as promising candidates for next-generation memory devices due to their superior memory characteristics. However, the issues of variation in the resistance state and operating voltage remain key issues that must be addressed. In this study, we propose a TaOx/SiO2 bilayer device, where the inserted SiO2 layer localizes the conductive path, improving uniformity during cycle-to-cycle endurance and retention. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) confirm the device structure and chemical properties. In addition, various electric pulses are used to investigate the neuromorphic system properties of the device, revealing its good potential for future memory device applications.

Double-Forming Mechanism of TaOx-Based Resistive Memory Device and Its Synaptic Applications.

The bipolar resistive switching properties of Pt/TaOx/InOx/ITO-resistive random-access memory devices under DC and pulse measurement conditions are explored in this work. Transmission electron microscopy and X-ray photoelectron spectroscopy were used to confirm the structure and chemical compositions of the devices. A unique two-step forming process referred to as the double-forming phenomenon and self-compliance characteristics are demonstrated under a DC sweep. A model based on oxygen vacancy migration is proposed to explain its conduction mechanism. Varying reset voltages and compliance currents were applied to evaluate multilevel cell characteristics. Furthermore, pulses were applied to the devices to demonstrate the neuromorphic system's application via testing potentiation, depression, spike-timing-dependent plasticity, and spike-rate-dependent plasticity.