Analysis and derivation of the marine water quality criteria of phenol for Korean seas.

Marine water quality criteria (WQC) have to be determined prior to the derivation of water quality based effluent limitations (WQBELs) for hazardous and noxious substances (HNS) discharged from marine industrial facilities. In this study, we carried out toxicity tests using ten native marine organisms and analyzed international toxicity data and data tested in this study to derive the WQC of phenol for Korean seas. By converting acute values to chronic ones with ACRs (acute-chronic ratios) of each trophic level according to well-verified method, we derived provisional WQC (0.96 mg/L) of phenol for Korean seas for the first time. The procedure to derive marine WQC and results of this study could provide the essential information for the establishment of national marine WQC and WQBELs for HNS discharged from marine industrial facilities.

A comparative study of deep learning-based network model and conventional method to assess beach debris standing-stock.

The conventional survey of marine debris standing-stock has various drawbacks such as high cost and inaccuracy because the total amount of debris in the whole beach is inferred using the results of the manual investigation in selected narrow areas. To overcome the disadvantages, an automatic detection method using a deep learning-based network model was developed to detect and quantify the beach debris. The network model developed in this study classified items with a precision of 0.87 (87%) mAP and showed <5% error compared to actual survey. This study is the first fieldwork in Korea that shows the difference between automatic and conventional methods to predict the beach debris standing-stock. The results provide essential information for the development of effective beach debris management systems and policies.

Endowing antifouling properties on metal substrata by creating an artificial barrier layer based on scalable metal oxide nanostructures.

Here, by creating different types of artificial barrier layer against bacterial attachment, anti-biofouling properties were endowed on three metallic surfaces - aluminum, stainless steel and titanium. To each metallic surface, a tailored chemical oxidation process was applied to grow scalable oxide structures with an additional appropriate coating, resulting in three different types of anti-biofouling barrier, a thin water film, an air layer and an oil layer. Fluorescence images of the attached bacteria showed that the water layer improved the anti-biofouling performance up to 8-12 h and the air layer up to 12-24 h, comparable with the lifetime of the air layer. In comparison, the oil layer exhibited the best anti-biofouling performance by suppressing the fouled area by < 10% up to 72 h regardless of the substratum type. The present work provides simple, low-cost, scalable strategies to enhance the anti-biofouling performance of industrially important metallic surfaces. [Formula: see text].

Environmental and economic loss analyses of the oil discharge from shipwreck for salvage planning.

In this study, we carry out environmental and economic loss analyses of the oil discharge from the shipwreck Jeh Hun. By performing 500 simulations of hypothetical oil spill cases, we obtain the minimum and worst damage cases. In the minimum damage case, there is just marine pollution without coastal pollution or aquaculture farm pollution. On the other hand, in the worst damage case, there is serious marine pollution, coastal pollution, and aquaculture pollution. The main purpose of the environmental and economic loss analyses is to support salvage planning for the shipwreck, because we have to consider the oil discharge from the shipwreck during oil removal and salvage. The results of this study show that the best salvage time is early morning in winter, when the northwest wind and maximum flood tide are dominant resulting in the spilt oil going forward into the open sea without coastal pollution and aquaculture pollution.

Initial environmental risk assessment of hazardous and noxious substances (HNS) spill accidents to mitigate its damages.

In this study, a system was established to perform an initial environmental risk assessment of hazardous and noxious substances (HNS) spill accidents. Initial environmental risk assessment was performed using exposure and hazard assessments. An integrated hydrodynamic and chemical fate model was used to predict HNS concentrations at harbors, taking into account local environmental conditions. To consider the worst case HNS spill accident, the spill amount of 10,000 tonnages, was used for this study. The results show that highly soluble HNS are fatal to marine organisms during the neap tide. The results were based on a hypothetical worst case HNS spill accident and, not any specific actual HNS spill accident. Nevertheless, the method and system developed in this study, which includes the physical/chemical properties of 158 priority HNS, can be readily used to perform an initial environmental risk assessment for future HNS spill accidents.

Cylindrical Water Triboelectric Nanogenerator via Controlling Geometrical Shape of Anodized Aluminum for Enhanced Electrostatic Induction.

We demonstrate a cylindrical water triboelectric nanogenerator (CW-TENG) that generates sustainable electrical output. The inner surface of the cylinder was patterned into superhydrophobic and hydrophilic parts to control water flow inside the packaged design of CW-TENG. Here, various thicknesses and roughnesses of the superhydrophobic surface, generated using aluminum oxide nanostructures for enhanced electrostatic induction, were measured to obtain the maximum output and superhydrophobicity. Also, we demonstrate the possibility of using a hydrophilic surface for energy harvesting and as a water reservoir in the packaged design.

Pollution risk assessment of oil spill accidents in Garorim Bay of Korea.

This study presents a model to assess the oil spill risk in Garorim Bay in Korea, where large-scale oil spill accidents frequently occur. The oil spill risk assessment is carried out by using two factors: 1) The impact probability of the oil spill, and 2) the first impact time of the oil that has been spilt. The risk assessment is conducted for environmentally sensitive areas, such as the coastline and aquaculture farms in the Garorim Bay area. Finally, Garorim Bay is divided into six subareas, and the risks of each subarea are compared with one another to identify the subarea that is most vulnerable to an oil spill accident. These results represent an objective and comprehensive oil spill risk level for a specific region. The prediction of the oil spill spread is based on real-time sea conditions and can be improved by integrating our results, especially when sea conditions are rapidly changing.

Development of waterborne oil spill sensor based on printed ITO nanocrystals.

Oil spill accidents occasionally occur in coastal and ocean environments, and cause critical environmental damage, spoiling the marine habitats and ecosystems. To mitigate the damages, the species and amount of spilled oil should be monitored. In this study, we developed a waterborne oil spill sensor using a printed ITO layer. ITO is a compatible material for salty environments such as oceans because ITO is strong against corrosion. The fabricated sensor was tested using three oils, gasoline, lubricant and diesel, and different oil thicknesses of 0, 5, 10, and 15mm. The results showed that the resistance of the sensor clearly increased with the oil thickness and its electrical resistance. For sustainable sensing applications in marine environments, XRD patterns confirmed that the crystal structure of the ITO sensor did not change and FE-SEM images showed that the surface was clearly maintained after tests.

Development of a new contactless dielectrophoresis system for active particle manipulation using movable liquid electrodes.

This study presents a new DEP manipulation technique using a movable liquid electrode, which allows manipulation of particles by actively controlling the locations of electrodes and applying on-off electric input signals. This DEP system consists of mercury as a movable liquid electrode, indium tin oxide (ITO)-coated glass, SU-8-based microchannels for electrode passages, and a PDMS medium chamber. A simple squeezing method was introduced to build a thin PDMS layer at the bottom of the medium chamber to create a contactless DEP system. To determine the operating conditions, the DEP force and the friction force were analytically compared for a single cell. In addition, an appropriate frequency range for effective DEP manipulation was chosen based on an estimation of the Clausius-Mossotti factor and the effective complex permittivity of the yeast cell using the concentric shell model. With this system, we demonstrated the active manipulation of yeast cells, and measured the collection efficiency and the dielectrophoretic velocity of cells for different AC electric field strengths and applied frequencies. The experimental results showed that the maximum collection efficiency reached was approximately 90%, and the dielectrophoretic velocity increased with increasing frequency and attained the maximum value of 10.85 ± 0.95 µm/s at 100 kHz, above which it decreased.

Risk assessment and national measure plan for oil and HNS spill accidents near Korea.

Many oil and HNS spill accidents occur in the waters surrounding the Korean Peninsula because Korea is one of the biggest trading partners in the world. In this study, we analyzed the oil and HNS spill accidents that occurred between 1994 and 2005 and created risk matrices to assess these accidents. The worst scenarios of future oil and HNS spill accidents were established, and the maximum spill amounts were estimated using historic accident data and a correlation from IPIECA. The maximum spill amounts are estimated to be between 77,000 and 10,000 tons of oil and HNS, respectively. One third of the spill materials should be removed using recovery equipment within three days of the spill event, according to the national measure plan. The capability of recovery equipment to remove spill materials can be estimated, and the equipment should then be prepared to mitigate the harmful effects of future oil and HNS accidents on humans and marine ecosystems.

Forces acting on a single particle in an evaporating sessile droplet on a hydrophilic surface.

The evaporating sessile droplet of a mono/didisperse colloid on a plate is a very useful and handy technique in micro/nano/bioapplications to separate, pattern, and control the particles. Although the fundamental nature of the evaporation phenomena and its applications have been extensively proposed, the crucial forces affecting a single particle motion in an evaporating droplet are not reported yet. To elucidate the impact of various forces including the drag, electrostatic, van der Waals, and surface tension forces on the particle motion in suspension, the magnitudes of them are compared using the scale analysis. In the early stage of the evaporation, in which the contact line is fixed, the motion of a single particle suspended in liquid are mostly affected by drag force. Later, with the incidence of the contact line recession, the surface tension force takes over the control of the single particle motion.

Behavior of particles in an evaporating didisperse colloid droplet on a hydrophilic surface.

It is well-known that the liquid and the nanoparticles in an evaporating colloid droplet on a hydrophilic surface move radially outward for the contact line to maintain its position. However, the motion of micro/nanoparticles in an evaporating didisperse colloid droplet has not been reported to date. In this study, an experiment on an evaporating didisperse colloid droplet on the hydrophilic surface is carried out. It is found that nanoparticles move radially outward and remain at the contact line while microparticles move inward toward the center of the droplet. Furthermore, the mechanism of the microparticles moving toward the center of the droplet is found to be due to the surface tension force of the liquid.

Electromigration current rectification in a cylindrical nanopore due to asymmetric concentration polarization.

We present experimental measurements of electromigration current through a single cylindrical nanopore. A single cylindrical nanopore with 175 nm diameter was fabricated in silicon in series with two micropores with 2 and 100 microm diameters. Thick electrical double layers (EDLs) (kappa a approximately 1) exhibit current rectification due to asymmetric concentration polarization while thinner EDLs show nearly symmetric conductance. After the electric field is turned off, electrical current is measured and observed due to redistribution of ions in the concentration polarization layer.

Separation of microparticles and biological cells inside an evaporating droplet using dielectrophoresis.

Microparticles or biological cells mixed in water were separated using the combination of an electrical force due to dielectrophoresis and a mechanical one generated in an evaporating droplet. Micropatterned electrodes of Au were fabricated on the silicon dioxide layer and were used to generate dielectrophoresis. Polystyrene particles, red blood cells. and E. coli were used as separating objects. Microparticles and biological cells were separated by adjusting the amplitude and frequency of the applied voltage. Although the mechanical force was enough to transport the particles to the boundary of the droplet, nevertheless, it could not detach the particles trapped at the electrode. Based on this work, the microparticles and biological cells can be separated, controlled, and sensed without using a liquid pumping unit.