Foams-to-Films: A Facile Approach Towards Space-Confined CVD Growth of MoS2.

2D materials have rapidly become the building blocks for the next generation of semiconducting materials and devices, with  Chemical vapor deposition (CVD) emerging as a prefered method for their synthesis. However, the predictable and reproducible growth of high quality, large 2D monolayers remains challenging. An important facet is controlling the local environment at the surface of the substrate - here, space-confinement techniques have emerged as promising candidates. We demonstrate that space-confined CVD growth using microstructured MoOx grown on Ni foam is an appealing approach for rapid growth of high quality MoS2 monolayers; a very important subset of 2D materials. This method eschews the use of powders which can be more difficult to control. By incorporation of a porous barrier in the Ni foam support, the rate of delivery of both the Mo and S source to the substrate is dampened, leading to coverage of large, high quality, mono-to-few layer triangular domains as confirmed by Raman and photoluminescence (PL) spectroscopies together with atomic force microscopy (AFM) height measurements.

Modifying the Substrate-Dependent Pd/Fe2O3 Catalyst-Support Synergism with ZnO Atomic Layer Deposition.

Low-loading Pd supported on Fe2O3 nanoparticles was synthesized. A common nanocatalyst system with previously reported synergistic enhancement of reactivity that is attributed to the electronic interactions between Pd and the Fe2O3 support. Fe2O3-selective precoalescence overcoating with ZnO atomic layer deposition (ALD), using Zn(CH2CH3)2 and H2O as precursors, dampens competitive hydrogenation reactivity at Fe2O3-based sites. The result is enhanced efficiency at the low-loading but high reactivity Pd sites. While this increases catalyst efficiency toward most aqueous redox reactions tested, it suppresses reactivity toward polyaromatic core substrates. X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) show minimal electronic impacts for the ZnO overcoat on the Pd particles, implying a predominantly physical site blocking effect as the reason for the modified reactivity. This serves as a proof-of-concept of not only stabilizing supported nanocatalysts but also altering reactivity with ultrathin ALD overcoats. The results point to a facile ALD route for selective enhancement of reactivity for low-loading Pd-based supported nanocatalysts.

Poly(N-Heterocyclic Carbene)-Capped Alloy and Core-Shell AuAg Bimetallic Nanoparticles.

N-Heterocyclic carbene (NHC)-stabilized metal nanoparticles (NPs) have recently attracted considerable attention. While most efforts in the field have been devoted to the development of NHC-tethered monometallic NPs and enhancing their stabilities under various conditions, their bimetallic counterparts are rare in the literature. Herein, we demonstrate that the covalent immobilization of Au and Ag atoms on polymerized NHCs is a powerful method to access bimetallic AuAg NPs. In addition, we show that while AuAg alloy NPs are often obtained via this method, the use of bimetallic polymeric substrates with lower Ag content, relative to Au, results in the formation of core-shell NPs with Au core and Ag shell. Application of these nanomaterials for oxygen reduction reaction is demonstrated with all materials exhibiting electrocatalytic activity. This work demonstrates for the first time that while bimetallic poly(NHC-metal)s are viable substrates to access NHC-stabilized bimetallic NPs, careful adjustment of metal content in the polymeric substrates can finetune the microstructure of the resulting NPs, i.e. alloy vs. core-shell.

Insight into the nature of carbon-metal bonding for N-heterocyclic carbenes in gold/silver complexes and nanoparticles using DFT-correlated Raman spectroscopy: strong evidence for π-backbonding.

N-Heterocyclic carbenes (NHCs) have emerged as promising ligands for stabilizing metallic complexes, nanoclusters, nanoparticles (NPs) and surfaces. The carbon-metal bond between NHCs and metal atoms plays a crucial role in determining the resulting material's stability, reactivity, function, and electronic properties. Using Raman spectroscopy coupled with density functional theory calculations, we investigate the nature of carbon-metal bonding in NHC-silver and NHC-gold complexes as well as their corresponding NPs. While low wavenumbers are inaccessible to standard infrared spectroscopy, Raman detection reveals previously unreported NHC-Au/Ag bond-stretching vibrations between 154-196 cm-1. The computationally efficient r2SCAN-3c method allows an excellent correlation between experimental and predicted Raman spectra which helps calibrate an accurate description of NHC-metal bonding. While π-backbonding should stabilize the NHC-metal bond, conflicting reports for the presence and absence of π-backbonding are seen in the literature. This debate led us to further investigate experimental and theoretical results to ultimately confirm and quantify the presence of π-backbonding in these systems. Experimentally, an observed decrease in the NHC's CN stretching due to the population of the π* orbital is a good indication for the presence of π-backbonding. Using energy decomposition analysis - natural orbitals for chemical valence (EDA-NOCV), our calculations concur and quantify π-backbonding in these NHC-bound complexes and NPs. Surprisingly, we observe that NPs are less stabilized by π-backbonding compared to their respective complexes-a result that partially explains the weaker NHC-NP bond. The protocol described herein will help optimize metal-carbon bonding in NHC-stabilized metal complexes, nanoparticles and surfaces.

Room temperature 3D carbon microprinting.

Manufacturing custom three-dimensional (3D) carbon functional materials is of utmost importance for applications ranging from electronics and energy devices to medicine, and beyond. In lieu of viable eco-friendly synthesis pathways, conventional methods of carbon growth involve energy-intensive processes with inherent limitations of substrate compatibility. The yearning to produce complex structures, with ultra-high aspect ratios, further impedes the quest for eco-friendly and scalable paths toward 3D carbon-based materials patterning. Here, we demonstrate a facile process for carbon 3D printing at room temperature, using low-power visible light and a metal-free catalyst. Within seconds to minutes, this one-step photocatalytic growth yields rod-shaped microstructures with aspect ratios up to ~500 and diameters below 10 µm. The approach enables the rapid patterning of centimeter-size arrays of rods with tunable height and pitch, and of custom complex 3D structures. The patterned structures exhibit appealing luminescence properties and ohmic behavior, with great potential for optoelectronics and sensing applications, including those interfacing with biological systems.

Ultrathin Atomic Layer Deposited Al2O3 Overcoat Stabilizes Al2O3-Pt/Ni-Foam Hydrogenation Catalysts.

Galvanic exchange seeds the growth of Pt nanostructures on the Ni foam monolith. Subsequent atomic layer deposition of ultrathin Al2O3 followed by annealing under air affords supported Pt catalysts with ultralow loading (0.020 ppm). In addition to the expected enhancement of the stability of the Pt particles on the surface, the ∼2 nm Al2O3 overcoat appears to also play a crucial role in the overall structural integrity of the NiOx nanoplates that grow on the Ni foam surface as a result of the preparative route. The resulting material is physically robust toward repeated handling and showcases retention of catalytic activity over 10 standard catalyst recycling trials, standing in marked contrast to the uncoated samples. Catalyst activity was tested via the hydrogenation of various functionalized styrenes at low temperatures and low hydrogen pressure in ethanol as a solvent, with a TOF as high as 9.5 × 106 h-1 for unfunctionalized styrene. Notably, the catalysts show excellent tolerance toward F, Cl, and Br substituents and no hydrogenation of the aromatic ring.

Molybdenum(III) Amidinate: Synthesis, Characterization, and Vapor Phase Growth of Mo-Based Materials.

The synthesis, characterization, and thermogravimetric analysis of tris(N,N'-di-isopropylacetamidinate)molybdenum(III), Mo(iPr-AMD)3, are reported. Mo(iPr-AMD)3 is a rare example of a homoleptic mononuclear complex of molybdenum(III) and fills a longstanding gap in the literature of transition metal(III) trisamidinate complexes. Thermogravimetric analysis (TGA) reveals excellent volatilization at elevated temperatures, pointing to potential applications as a vapor phase precursor for higher temperature atomic layer deposition (ALD), or chemical vapor deposition (CVD) growth of Mo-based materials. The measured TGA temperature window was 200-314 °C for samples in the 3-20 mg range. To validate the utility of Mo(iPr-AMD)3, we demonstrate aerosol-assisted CVD growth of MoO3 from benzonitrile solutions of Mo(iPr-AMD)3 at 500 °C using compressed air as the carrier gas. The resulting films are characterized by X-ray photoelectron spectroscopy, X-ray diffraction, and Raman spectroscopy. We further demonstrate the potential for ALD growth at 200 °C with a Mo(iPr-AMD)3/Ar purge/300 W O2 plasma/Ar purge sequence, yielding ultrathin films which retain a nitride/oxynitride component. Our results highlight the broad scope utility and potential of Mo(iPr-AMD)3 as a stable, high-temperature precursor for both CVD and ALD processes.

Pt-Coated Silicon Nanoparticles: An Investigation into the Hydrosilylation on Hydrogen-Terminated Silicon Surfaces Using Pt(dvs).

The interaction of hydrogen-terminated silicon nanoparticles (H-SiNPs) with Karstedt's catalyst at various temperatures was investigated. The results indicate that at room temperature, the oxidative addition of Pt(0) onto H-SiNPs is irreversible, and the catalyst is not eliminated from the surface of H-SiNPs, enabling a facile synthesis of Pt-loaded SiNPs that can undergo ligand exchange. The nature of the Pt-on-Si ensemble is characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Reaction conditions that enable effective hydrosilylation are discussed. It is found that higher temperatures favor reductive elimination of the catalyst and hydrosilylation of 1-octene onto the surface of the H-SiNPs.

Monomeric and Polymeric Mesoionic N-Heterocyclic Carbene-Tethered Silver Nanoparticles: Synthesis, Stability, and Catalytic Activity.

In recent years, N-heterocyclic carbenes (NHCs) have garnered significant attention as promising alternatives to thiols to stabilize metallic nanoparticles and planar surfaces. While most studies thus far have focused on NHC-functionalized gold nanoparticles (AuNPs), as an ideal platform to investigate the role of NHCs in stabilizing such nanoparticles, their ability to protect more unstable coinage metal nanoparticles, such as silver nanoparticles (AgNPs), has been largely overlooked. This is despite the fact that AgNPs possess a much more sensitive optical response that, upon their enhanced stability, can broaden their scope of application in various fields, including nanomedicine and catalysis. In this study, the synthesis and use of monomeric and polymeric mesoionic NHC-Ag(I) complexes as precursors to mono- and multidentate NHC-tethered AgNPs are reported. The polymeric analog was obtained by first synthesizing a polymer, containing 1,2,3-triazole repeat units, employing the copper-catalyzed alkyne-azide cycloaddition click polymerization of monomers containing diazide- and dialkyne functional groups. Subsequent quaternization of the triazole moieties and Ag insertion yielded the target NHC-Ag-containing polymer. Using this polymer as well as its monomeric analog as substrates, AgNPs with either catenated networks of NHCs or monomeric NHCs were fabricated by their reduction using borane-tert-butylamine complex. Our stability studies demonstrate that while monomeric NHCs impart some degree of stability to AgNPs, particularly at elevated temperatures in aqueous as well as organic medium, their polymeric analogs further enhance their stability in acidic environment (pH = 2) and against glutathione (3 mM), as an example of a biologically relevant thiol, in aqueous media. To highlight the application of these NHC-functionalized AgNPs in catalysis, we explore the aqueous phase reduction of methyl orange and 4-nitrophenol.

Synergistic Steric and Electronic Effects on the Photoredox Catalysis by a Multivariate Library of Titania Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti6O9[links]3, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti6O9(CO2)6]∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.

Release Rate Studies of 5-Aminosalacylic Acid Coated with Atomic Layer-Deposited Al2O3 and ZnO in an Acidic Environment.

5-Aminosalicylic acid (5-ASA) is a first-line defense drug used to treat mild cases of inflammatory bowel disease. When administered orally, the active pharmaceutical ingredient is released throughout the gastrointestinal tract relieving chronic inflammation. However, delayed and targeted released systems for 5-ASA to achieve optimal dose volumes in acidic environments remain a challenge. Here, we demonstrate the application of atomic layer deposition (ALD) as a technique to synthesize nanoscale coatings on 5-ASA to control its release in acidic media. ALD Al2O3 (38.0 nm) and ZnO (24.7 nm) films were deposited on 1 g batch powders of 5-ASA in a rotatory thermal ALD system. Fourier transform infrared spectroscopy, scanning electron microscopy, and scanning/transmission electron microscopy establish the interfacial chemistry and conformal nature of ALD coating over the 5-ASA particles. While Al2O3 forms a sharp interface with 5-ASA, ZnO appears to diffuse inside 5-ASA. The release of 5-ASA is studied in a pH 4 solution via UV-vis spectroscopy. Dynamic stirring, mimicking gut peristalsis, causes mechanical attrition of the Al2O3-coated particles, thereby releasing 5-ASA. However, under static conditions lasting 5000 s, the Al2O3-coated particles release only 17.5% 5-ASA compared to 100% release with the ZnO coating. Quartz crystal microbalance-based etch studies confirm the stability of Al2O3 in pH 4 media, where the ZnO films etch 41× faster than Al2O3. Such results are significant in achieving a nanoscale coating-based drug delivery system for 5-ASA with controlled release in acidic environments.

Total Synthesis of Polysubstituted γ-Butyrolactone Lignans (-)-Hinokinin, (-)-Bicubebin B, and (-)-Isodeoxypodophyllotoxin via Oxime Carbonate Formation.

The diverse structures and profound biological activities of lignan natural products have enticed significant effort in the exploration of new methodologies for their total synthesis. We have prepared γ-butyrolactone oximes from readily available δ-nitro alcohols via Boc2O mediated cyclization. The mild conditions are compatible with a wide range of functional groups, and this methodology has been applied to the total synthesis of five lignan natural products.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions.

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

Reactive Dicarbon as a Flexible Ligand for Transition-Metal Coordination and Catalysis.

Dicarbon is a reactive carbon allotrope that naturally exists only in the high-temperature medium of stellar space. We report the successful preparation of a series of bottleable phosphine-stabilized dicarbon (PDC) molecules. We explore the use of these molecules as a new complementary class of carbene-like ligands featuring strong σ-donor (>NHCs and CAAcs) but weak π-acceptor properties. Steric map analysis of PDC based on Cavallo's SambVca program reveals comparable steric volume bulk of 32.5%, similar to the conventional IMes carbene. However, our PDCs exhibit dynamic steric flexibility modulated by the nature of the metal complexes and catalytic reaction environment. We demonstrate the catalytic utility of the PDC framework by its successful implementation for Suzuki-Miyaura cross-coupling and the reductive coupling reaction of an aldehyde and alkyne. Detailed investigations of the reductive coupling reaction reveal an important secondary interaction between PDC and metal complexes, which plays a critical role in the catalytic system.

Synthesis, characterization, X-ray and electronic structures of diethyl ether and 1,2-dimethoxyethane adducts of molybdenum(IV) chloride and tungsten(IV) chloride.

The bis(diethyl ether) and 1,2-dimethoxyethane (dme) adducts of molybdenum(IV) chloride and tungsten(IV) chloride are valuable starting materials for a variety of synthetic inorganic and organometallic reactions. Despite the broad utility and extensive use of these 6-coordinate complexes, their syntheses remain unoptimized, and their characterization incomplete after more than three decades. While exploring the ligand exchange behaviour of trans-MoCl4(OEt2)2, we obtained single crystals of this red-orange complex and subsequently compared its structural parameters with those of the recently reported trans-WCl4(OEt2)2. Significantly improved procedures for both MoCl4(dme) and WCl4(dme) were developed, and X-ray diffraction data were obtained and analysed. The magnetic properties of the dme adducts were probed, both with Gouy and SQUID magnetometry measurements. The magnetic moment of WCl4(dme) was smaller than that of MoCl4(dme), an observation that we attribute to the greater spin-orbit coupling of tungsten. Electronic structure studies were also conducted to probe the preferential trans configuration of the diethyl ether adducts and to assign the UV-Vis spectra of the dme adducts.

Electronic Structure of Re2(O2CR)4Cl2 Complexes (R = H, CMe3) and Reassignment of the Electronic Absorption Spectrum of Re2(O2CCMe3)4Cl2.

Electronic structure calculations on two dinuclear rhenium(III) carboxylate complexes, Re2(O2CH)4Cl2 and Re2(O2CCMe3)4Cl2, are presented and discussed. Allowed electronic transitions for both molecules were calculated using time-dependent density functional theory (TDDFT). The results for the pivalate dimer, Re2(O2CCMe3)4Cl2, are compared with previously reported single-crystal polarized absorption spectra obtained by Martin and co-workers (Inorg. Chem.1984, 23, 699-701). Several revisions to the previous spectral assignments are proposed.

"MoCl3(dme)" Revisited: Improved Synthesis, Characterization, and X-ray and Electronic Structures.

"MoCl3(dme)" (dme = 1,2-dimethoxyethane) is an important precursor for midvalent molybdenum chemistry, particularly for triply Mo-Mo bonded compounds of the type Mo2X6 (X = bulky anionic ligand). However, its exact structural identity has been obscure for more than 50 years. In search of a convenient, large-scale synthesis, we have found that trans-MoCl4(Et2O)2 dissolved in dme can be cleanly reduced with dimethylphenylsilane, Me2PhSiH, to provide khaki Mo2Cl6(dme)2 in ∼90% yield. If the reduction is performed on a small scale, single crystals suitable for X-ray crystallography can be obtained. Two different crystal morphologies were identified, each belonging to the P21/n space group, but with slightly different unit cell constants. The refined structure of each form is an edge-shared bioctahedron with overall Ci symmetry and metal-metal separations on the order of 2.8 Å. The bulk material is diamagnetic as determined by both the Gouy method and SQUID magnetometry. Density functional theory calculations suggest a σ2π2δ*2 ground state for the dimer with the diamagnetism arising from a singlet diradical "broken symmetry" electronic configuration. In addition to a definitive structural assignment for "MoCl3(dme)", this work highlights the utility of organosilanes as easy to handle, alternative reductants for inorganic synthesis.

A 35-year-old mystery solved: a facile synthetic route and structural confirmation of tetrachlorobis(diethyl ether)tungsten(IV).

The true identity of the diethyl ether adduct of tungsten(IV) chloride, WCl4(Et2O)x, has been in doubt since 1985. Initially postulated as the bis-adduct, WCl4(Et2O)2, questions arose when elemental analyses were more in line with a mono-ether adduct, viz. WCl4(Et2O). It was proposed that this was due to the thermal instability of the bis-adduct. Here, we report the room-temperature X-ray crystal structure and Hirshfeld surface characteristics of trans-tetrachloridobis(diethyl ether)tungsten(IV), trans-WCl4(Et2O)2 or trans-[WCl4(C4H10O)2]. The compound crystallizes, with half of the molecule in the asymmetric unit, in the centrosymmetric space group P21/n. The W-O distance is 2.070 (2) Å, while the W-Cl distances are 2.3586 (10) and 2.3554 (10) Å.

Electron beam-induced deposition of platinum from Pt(CO)2Cl2 and Pt(CO)2Br2.

Two platinum precursors, Pt(CO)2Cl2 and Pt(CO)2Br2, were designed for focused electron beam-induced deposition (FEBID) with the aim of producing platinum deposits of higher purity than those deposited from commercially available precursors. In this work, we present the first deposition experiments in a scanning electron microscope (SEM), wherein series of pillars were successfully grown from both precursors. The growth of the pillars was studied as a function of the electron dose and compared to deposits grown from the commercially available precursor MeCpPtMe3. The composition of the deposits was determined using energy-dispersive X-ray spectroscopy (EDX) and compared to the composition of deposits from MeCpPtMe3, as well as deposits made in an ultrahigh-vacuum (UHV) environment. A slight increase in metal content and a higher growth rate are achieved in the SEM for deposits from Pt(CO)2Cl2 compared to MeCpPtMe3. However, deposits made from Pt(CO)2Br2 show slightly less metal content and a lower growth rate compared to MeCpPtMe3. With both Pt(CO)2Cl2 and Pt(CO)2Br2, a marked difference in composition was found between deposits made in the SEM and deposits made in UHV. In addition to Pt, the UHV deposits contained halogen species and little or no carbon, while the SEM deposits contained only small amounts of halogen species but high carbon content. Results from this study highlight the effect that deposition conditions can have on the composition of deposits created by FEBID.

Crystal structure and Hirshfeld surface analysis of the elusive trichlorobis(diethyl ether)oxomolybdenum(V).

First reported in 1930, MoCl3O(Et2O)2 is a by-product of the reductive synthesis of MoCl4(OEt2)2 from MoCl5. We report herein the X-ray crystal structure and Hirshfeld surface characteristics of mer-MoCl3O(Et2O)2, or [MoCl3O(C4H10O)2]. The compound crystallizes in the orthorhombic space group P212121. The molybdenyl (Mo=O) bond length is 1.694 (3) Šand the cis- and trans-Mo-O distances are 2.157 (3) and 2.304 (3) Å, respectively. Intermolecular Mo=O...H bonding is present in the lattice, with the shortest distance being 2.572 Å.