Asymmetrical flow field-flow fractionation technique for separation and characterization of biopolymers and bioparticles.

Field-flow fractionation (FFF) is one of the most versatile separation techniques in the field of analytical separation sciences, capable of separating macromolecules in the range 10³-10¹5 g mol⁻¹ and/or particles with 1 nm-100 µm in diameter. The most universal and most frequently used FFF technique, flow FFF, includes three types of techniques, namely symmetrical flow FFF, hollow fiber flow FFF, and asymmetrical flow FFF which is most established variant among them. This review provides a brief look at the theoretical background of analyte retention and separation efficiency in FFF, followed by a comprehensive overview of the current status of asymmetrical flow FFF with selected applications in the field of biopolymers and bioparticles.

Testing of variants of the MTHFR and ESR1 genes in 1798 Finnish individuals fails to confirm the association with migraine with aura.

Among the few independently replicated genetic associations in migraine are polymorphisms in the methylenetetrahydrofolate reductase (MTHFR) and oestrogen receptor (ESR1) genes. We studied the contribution of these genes to migraine susceptibility by genotyping six MTHFR and 26 ESR1 polymorphisms in 898 unrelated migraine with aura (MA) patients and in 900 unrelated healthy controls. There were no differences in the genotype distributions of the previously migraine-associated SNPs C677T (MTHFR) and G2014A (ESR1) between cases and controls (P-values 0.83 and 0.55, respectively). Thus, we were not able to replicate the previous findings, although our study had considerable power. However, five of the ESR1 SNPs (rs6557170, rs2347867, rs6557171, rs4870062 and rs1801132) that were in strong linkage disequilibrium were nominally associated with MA (uncorrected P-values 0.007-0.034). These results did not, however, remain significant after taking multiple testing into account. Thus it seems unlikely that the studied genes are involved in migraine susceptibility, at least in this sample.

Use of a partial filling technique and reverse migrating micelles in the study of N-methylcarbamate pesticides by micellar electrokinetic chromatography-electrospray ionization mass spectrometry.

This study describes three ways to couple micellar electrokinetic chromatography (MEKC) on-line with electrospray ionization mass spectrometry (ESI-MS) for the analysis of N-methylcarbamate pesticides. The methods involved the use of a partial filling (PF) technique under basic conditions and the use of reverse migrating micelles (RMMs) under acidic and basic conditions. The use of RMMs in basic electrolyte solutions required coated capillaries with low electroosmotic flows, and capillaries coated with anionic poly(sodium 2-acrylamide-2-methylpropanesulfonate) were selected for the purpose. Before the on-line MEKC-ESI-MS coupling, the MEKC and MS conditions were separately optimized under off-line conditions. The methods were compared in terms of detection limits and the stability of the electrospray process. The PF method offered good separation but poorer stability of the electrospray relative to the other methods. A more stable electrospray performance was obtained with use of RMMs in acidic electrolyte solutions, but some of the analytes were protonated and could not be detected due to the increase in their retention factors. However, with the use of anionic polymer-coated capillaries and RMMs at pH 8.5, all analytes were successfully separated. The high-salt stacking method was applied to improve the sensitivity of MEKC-ESI-MS and the detection limits were in the range of 0.04-2.0 microg/ml.

Determination of iridoid glycosides by micellar electrokinetic capillary chromatography-mass spectrometry with use of the partial filling technique.

A fast and easy method was sought for determination of the iridoid glycosides catalpol, ketologanin, verbenalin, loganin, 8-epi-loganic acid, geniposidic acid and 10-cinnamoyl catalpol in plant samples. The method involved micellar electrokinetic capillary chromatography (MEKC) coupled on-line to mass spectrometry. The partial filling technique and electrospray ionization were used. Seven iridoid glycosides could be separated with use of MEKC under basic conditions. However, 8-epi-loganic acid and geniposidic acid could not be detected simultaneously with the five neutral iridoid glycosides by mass spectrometry. Therefore, only the neutral iridoid glycosides were screened from plant samples. Catalpol, verbenalin, loganin and possibly 10-cinnamoyl catalpol were found in an examination of seven plant species in the genera Plantago, Veronica, Melampyrum, Succisa, and Valeriana. Aucubin, which was not included in the sample mixture used in method development because of overlapping with catalpol in MEKC, was also detected. The limits of detection for the iridoid glycosides, both at the UV and at the mass spectrometer, are given.

Extremely high electric field strengths in non-aqueous capillary electrophoresis.

The influence of high electric field strength on the separation of basic analytes in non-aqueous alcohol background electrolyte (BGE) solutions was investigated. Increasing the separation voltage in capillary electrophoresis (CE) may be advantageous if the conductivity of the BGE solution is low enough to allow fast separations without excessive Joule heating or band broadening. The voltage range tested was 20-60 kV with methanol and ethanol, and 25-60 kV with propanol and butanol as solvent for BGE. The resulting electric field strengths ranged from 660 V cm(-1) to 2000 V cm(-1). Experiments were made with a special laboratory constructed CE instrument. The separation efficiency vs. voltage curve was found to vary with the alcohol BGE solution. The increase in voltage decreased the separation efficiency in the case of methanol BGE solution, but with the other BGEs a clear efficiency maximum was obtained above 30 kV. The highest separation efficiencies were achieved with propanol BGE solution, where the efficiency maximum was reached at 45 kV. However, reasonable efficiency was achieved even at 60 kV. The extent of Joule heating was determined by calculating the temperature inside the capillary and the observed plate heights were interpreted in terms of the Van Deemter equation. The decrease in the separation efficiency with higher voltage was attributed mainly to Joule heating in the case of methanol and ethanol BGE solution and to the analyte adsorption on the capillary wall with propanol and butanol BGE solutions.

Non-aqueous capillary electrophoresis.

The benefits of non-aqueous capillary electrophoresis have been described in a number of recent publications. The wide selection of organic solvents, with their very different physicochemical properties, broadens our scope to manipulate separation selectivity. The lower currents present in non-aqueous solvents allow the use of high electric field strengths and wide bore capillaries, the latter in turn allowing larger sample load. In many cases detection sensitivity can also be enhanced. The potential of non-aqueous capillary electrophoresis is discussed throughout the paper, and the feasibility of capillary electrophoresis under non-aqueous media is demonstrated with reference to several applications.

Modified liquid junction interface for nonaqueous capillary electrophoresis-mass spectrometry.

Electrospray ionization (ESI) is the most widely used ionization method in on-line coupling of capillary electrophoresis-mass spectrometry (CE-MS). The conventional coaxial sheath flow electrospray interface is currently being replaced by the more sensitive nanoelectrospray technique. The usual limitation of nanoelectrospray CE-MS interface has been its short lifetime caused by deterioration of the metal coating on the CE capillary terminus. This article describes an easy way to construct a more durable and sensitive nanospray interface for nonaqueous CE-MS. In this approach a very thin glass spray capillary (ca. 30 microm outer diameter) is partly inserted inside the CE capillary, the junction being surrounded by the electrolyte medium, which is in contact with the platinum electrode. The interface was tested with five pharmaceuticals: methadone, pentazocine, levorphanol, dihydrocodeine, and morphine. Detection limits ranged from 12 to 540 fmol. Separation efficiency and reproducibility were also studied. The CE current was found to be stable and the migration times were highly reproducible. All the CE separations were carried out in a nonaqueous background electrolyte solution.

Compensation of the siphoning effect in nonaqueous capillary electrophoresis by vial lifting.

Increasing the sample load in nonaqueous capillary electrophoresis through the use of wide-bore capillaries is a good way to scale up analytical separations to semipreparative level. However, obtaining high efficiency requires the use of special instrumentation to eliminate siphoning. When wide-bore capillaries are employed, relatively large solvent volumes are transported from inlet to outlet vial, and due to the difference in liquid levels a siphoning flow from outlet to inlet is established. Siphoning induces a deviation from the plug-like flow profile and adversely affects the separation efficiency. In this study the use of wide-bore capillaries in nonaqueous capillary electrophoresis was examined with compensation for siphoning by lifting of the inlet vial. The inlet vial is raised at a speed appropriate for maintaining equal levels of liquid in the inlet and outlet vials. The optimal lift rate was determined empirically from a series of runs in which the lift rate was varied. As well, a simple theoretical model was devised for the calculation of lift rates. The model was successfully applied for the 200 microm and 320 microm ID capillaries but for the 530 microm ID capillary the predicted optimal lift rate was too low. Evidently this was because the theory was unable to account for the effect of siphoning on the migration times. Three model compounds, bumetanide, furosemide and ethacrynic acid, were separated using an acetonitrile-ethanol mixture (50:50, v/v) with potassium acetate (1 mM) or ammonium acetate (5 mM) as electrolyte. Good separation of bumetadine and ethacrynic acid was obtained even with a 530 microm ID capillary when the lift rate was carefully optimized. Without elimination of siphoning the peaks would not have been detectable. The viscosities and electrical conductivities of the electrolyte solution measured at different temperatures showed that viscosity as well as conductivity decreased with increasing temperature. The temperature dependence of the conductivity was used to estimate the temperature inside the CE capillary.

Evaluation of the Galega-Rhizobium galegae system for the bioremediation of oil-contaminated soil.

The bioremediation potential of a nitrogen-fixing leguminous plant, Galega orientalis, and its microsymbiont Rhizobium galegae was evaluated in BTX (benzene, toluene, xylene)-contaminated soils in microcosm and mesocosm scale. To measure the intrinsic tolerance of the organisms to m-toluate, a model compound representing BTX, G. orientalis and R. galegae were cultivated under increasing concentrations of m-toluate alone and in association with Pseudomonas putida pWWO, a bacterial strain able to degrade toluene-derived compounds. The test plants and rhizobia remained viable in m-toluate concentrations as high as 3000 ppm. Plant growth was inhibited in concentrations higher than 500 ppm, but restituted when plants were transferred into m-toluate-free medium. Nodulation was blocked under the influence of m-toluate, but was restored after the plants were transferred into the non-contaminated media. In the mesocosm assay the Galega plants showed good growth, nodulation and nitrogen fixation, and developed a strong rhizosphere in soils contaminated with oil or spiked with 2000 ppm m-toluate. Thus, this legume system has good potential for use on oil-contaminated sites

Alcohols and wide-bore capillaries in nonaqueous capillary electrophoresis.

The feasibility of using C1-C5 alcohols as electrolyte solutions in nonaqueous capillary zone electrophoresis was investigated. The separation of basic narcotic analgesics and acidic diuretics was modified by changing the alcohol in an electrolyte solution containing alcohol-acetonitrile-acetic acid (50:49:1, v/v) and 20 mM ammonium acetate while other experimental conditions were kept constant. The alcohols studied were methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol. The results indicate that even longer-chain alcohols can be used in nonaqueous capillary zone electrophoresis and, because of the lower currents they allow, they are especially advantageous in wider capillaries. Basic analytes were separated in 200 microm and 320 microm ID capillaries with 1-butanol-acetonitrile-acetic acid (50:49:1, v/v) containing 20 mM ammonium acetate as electrolyte solution. Problems related to the use of wide-bore capillaries are discussed.

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis.

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.

On-line partial filling micellar electrokinetic capillary chromatography-electrospray ionization-mass spectrometry of corticosteroids.

The one-line combination of micellar electrokinetic chromatography (MECC) with electrospray ionization-mass spectrometry (ESI-MS) was investigated using some corticosteroids as model components. The on-line technique is difficult because the micelles in the electrolyte solution tend to soil the mass spectrometer and lower the sensitivity of the spectrometer. To prevent the micelles from reaching the mass spectrometer, several techniques have been developed among which is the partial filling (PF) technique. In this study the PF-MECC technique was investigated in an on-line MECC-ESI-MS study of mixtures of corticosteroids. Because the compounds are uncharged, partitioning or interaction with micelles is required to achieve separation. Surfactant solutions of sodium dodecyl sulfate (SDS), sodium cholate (SC), and SDS/SC mixtures were used as micellar phase. Good MECC separation was achieved after optimization of the surfactant concentrations and the length of the injected micellar plug. Both hydrodynamic and electrokinetic injections of the micellar solutions were tested. A basic ammonium acetate solution was used as the CE electrolyte solution. The ESI-MS analysis of the compounds was performed in the positive ionization mode, using an acidic sheath liquid. Because of the low MS intensities of the corticosteroids, the peaks were isolated during the MS runs. MS-MS and MS-MS-MS data on the corticosteroids were obtained by off-line injection of the compounds.

Screening of thyroid function in the hospitalized aged.

When a thyroid test was made on all the patients coming to a geriatric department of a hospital, markedly more new cases of hypothyroidism (17 as against 2), and also somewhat more new cases of hyperthyroidism (34 as against 21) were found than when the thyroid test was used only on clinical suspicion of thyroid dysfunction. The authors consider a thyroid test (T4?) worth taking systematically in all aged patients admitted to hospital.