Idiopathic avascular necrosis of the scaphoid (Preiser's disease): a case report and review of the literature.

Idiopathic avascular necrosis of the scaphoid bone, Preiser's disease, was originally described as a deteriorative pathology whereby the osseous structure necroses due to loss of blood supply. It may present with multifactorial etiology, which is still largely not well understood. We describe a case of Preiser's disease in a 70-year-old female, with worsening pain and loss of range of motion in her right wrist over a two-year period. Past medical history was significant for Sjogren's disease, fibromyalgia, and dystonia. Pain began several months following traumatic right dorsal wrist injury. Diagnosis of traumatic scaphoid fracture was originally suspected. Conservative treatment was unsuccessful. Radiographs did not demonstrate evidence of primary fracture. CT scan and MRI demonstrated osteonecrosis of the proximal pole of the scaphoid, but no evidence of fracture, either residual or healing, was found. Proximal row carpectomy was performed for avascular necrosis of the scaphoid. Histology confirmed diagnosis and verified absence of fracture. Postoperatively, the patient's pain and range of motion improved. This report combines histological findings of Preiser's disease with radiographic images which may ameliorate understanding of the clinical pathophysiology. We describe an unusual manifestation of Preiser's disease whereby a single traumatic event, in the absence of fracture, led to idiopathic scaphoid avascular necrosis, which may have been associated with Sjogren's syndrome and fibromyalgia. These conditions may have negatively impacted microvasculature and decreased bone mineral density, inversely correlated with the production of fatty marrow, facilitating the onset of osteonecrosis in the scaphoid.

Techniques for Retrieval of Lacerated Flexor Tendons: A Scoping Review.

Introduction: Flexor tendon laceration is often followed by retraction of the proximal stump. The goals of this review were to describe the myriad of proximal stump retrieval surgical techniques and where available to provide the clinical evidence associated with each. Methods: A Medline and Web of Science search was performed to identify any publication whose primary purpose was to describe a tendon retrieval technique. The techniques were assigned to 8 groups. Clinical outcomes, where reported, and advantages and disadvantages of the technique as reported by the authors of the articles were analyzed. Results: Eight-hundred and forty-one publications complied with the search terms, and 33 articles were included in the current analysis. Only 2 of these articles were randomized controlled trials, and they were of low quality. Conclusion: There is no high-quality evidence to allow quantitative comparison of tendon retrieval techniques. An incremental approach can be recommended based on the qualitative review. After failed atraumatic attempts to retrieve the tendon by milking, retrieval should be done through proximal incision at the A1 pulley level, preferably without pulling the tendon out of the wound. When available, using an endoscope to retrieve the tendon appears to be a promising alternative.

Introduction: Une lacération des tendons fléchisseurs est souvent suivie de la rétraction du moignon proximal. Les buts de cette revue étaient de décrire la myriade de techniques chirurgicales de récupération du moignon proximal et, quand cela était possible, de fournir les données probantes cliniques associées à chaque technique. Méthodes: Une recherche dans les bases de données Medline et Web of Science a été réalisée pour identifier toute publication dont l'objectif principal était de décrire une technique de récupération d'un tendon. Les techniques ont été réparties en huit groupes. Les résultats cliniques, quand ils étaient décrits, et les avantages et inconvénients de chaque technique tels que décrits par les auteurs des articles ont été analysés. Résultats: Huit cent quarante et une publications répondaient aux termes de la recherche et 33 articles ont été inclus dans la présente analyse. Seulement deux de ces articles étaient des essais contrôlés randomisés et ils étaient de mauvaise qualité. Conclusion: Il n'existe pas de données probantes de haute qualité qui permettent une comparaison quantitative entre les techniques de récupération des tendons. Une approche incrémentielle peut être recommandée en se basant sur la revue qualitative. Après des tentatives infructueuses de récupération du tendon par succion, la récupération devrait être faite par incision proximale au niveau de la poulie A1, de préférence sans tirer le tendon hors de la plaie. Quand cela est possible, l'utilisation d'un endoscope pour récupérer le tendon semble être une option prometteuse.

Diabetes Mellitus and Poor Glycemic Control Are Associated With a Higher Risk of Lumbar Spinal Stenosis: An Analysis of a Large Nationwide Database.

STUDY DESIGN: A large-scale retrospective case-control study. OBJECTIVE: Examine diabetes as a risk factor for lumbar spinal stenosis (LSS) development and evaluate the impact of diabetes duration, glycemic control, and associated complications on this risk. SUMMARY OF BACKGROUND DATA: Diabetes mellitus, a multiorgan disorder impacting various connective tissues, induces histological changes in spinal structures, particularly the ligamentum flavum. While clinical studies suggest a higher incidence of LSS in diabetic patients, substantial epidemiological research on the likelihood of LSS diagnosis in individuals with diabetes is scarce. MATERIALS AND METHODS: Using nationwide data, a total of 49,576 patients diagnosed with LSS based on International Classification of Diseases-10 codes were matched with controls of the same number based on age and sex. Employing a multivariable logistic regression model, the study assessed for the association between spinal stenosis and diabetes, while adjusting for confounders. RESULTS: We found a higher likelihood of LSS diagnosis in diabetic patients [odds ratio (OR) 1.39, 95% CI: 1.36 - 1.43, P <0.001]. Those with hemoglobin A1c ≥7% and ≥1 diabetes-related complication also had an elevated likelihood (OR: 1.19, 95% CI: 1.08-1.31, P =0.001). Prolonged diabetes exposure increased the risk. Diabetes diagnosis reduced median survival by around 4.5 years for both stenosis and nonstenosis patients; spinal stenosis diagnosis alone minimally impacted survival. Relative to individuals diagnosed with diabetes mellitus at the age of 65 or older, the OR for developing LSS were 1.22 (95% CI: 1.18-1.27, P <0.001) when DM was diagnosed at 50 to 65 years old and 1.67 (95% CI: 1.56-1.79, P <0.001) for those under 50 years old. Multivariate analysis revealed a significantly increased risk of all-cause mortality in patients with DM and spinal stenosis (hazard ratio: 1.36, 95% CI: 1.29-1.44, P <0.001) and those with DM without stenosis (hazard ratio: 1.49, 95% CI: 1.41-1.57, P <0.001) compared with controls. CONCLUSIONS: Diabetic patients with prolonged disease, poor glycemic control, and diabetes-related complications face an elevated risk of developing LSS. Recognizing the reciprocal adverse relationship between these conditions is crucial in clinical practice and designing public health measures for managing both conditions. LEVEL OF EVIDENCE: 4.

Diabetes Mellitus Is a Possible Risk Factor for the Development of Trochanteric Bursitis-A Large-Scale Population-Based Study.

BACKGROUND: Trochanteric Bursitis (TB) is a common reason to seek primary care, previously shown to be associated with female gender and obesity. Diabetes mellitus (DM) has several musculoskeletal manifestations, but was never found to be associated with TB. PURPOSE: To explore the association between DM and TB, based on a large database. The secondary aim was to explore the influence of gender and insulin usage on the occurrence of TB. STUDY DESIGN: cross-sectional study. METHODS: A population-based cohort consisting of 60,610 patients (55,428 without DM and 5182 with DM), of whom 5418 were diagnosed with TB. A logistic regression model was applied to estimate propensity scores. RESULTS: The odds of individuals with DM being diagnosed with TB were 55.8% higher compared to the odds of patients without DM (OR: 1.558, 95% CI: [1.429, 1.70], p < 0.0001). We found that insulin users had a lower risk of TB than patients not using insulin (log-rank p < 0.0001). Females are 3.3 times more likely to have TB than males (RR: 3.337, 95% CI: [3.115, 3.584], p < 0.0001). CONCLUSIONS: DM is a risk factor for developing TB. Insulin had a protective effect against TB, suggesting that better glycemic control might prevent this painful infliction.

Neglected Scaphocapitate Syndrome.

Background Scaphocapitate syndrome is a rare injury where the proximal pole of the capitate rotates 90 to 180 degrees. The proximal pole of the capitate, thought to receive its vascular supply retrograde, is rendered avascular in such cases. However, recent evidence of low rates of avascular necrosis in displaced capitate fractures, and new vascular studies of the capitate, challenge this paradigm. Case Description We report a case of a missed and neglected scaphocapitate syndrome with more than 30 years follow-up. While the patient experienced midcarpal arthritis, the injury had not resulted in capitate proximal pole avascular necrosis as per T1 magnetic resonance imaging studies. Literature Review Missed and chronic cases of scaphocapitate syndrome were reported previously. Successful outcomes were achieved with anatomical reduction in cases without midcarpal arthritis. Salvage procedures or arthroplasty procedures are recommended with the presence of midcarpal arthritis. However, there are no reports of a neglected case with more than 30 years follow-up with preserved vascularity of the proximal pole of the capitate. Clinical Relevance This case illustrates that vascularity of the proximal pole of the capitate can be preserved even in longstanding displaced fractures.

Risk Factors Associated With de Quervain Tenosynovitis in Postpartum Women.

BACKGROUND: De Quervain (DQ) disease is caused by stenosis of the first dorsal compartment containing the abductor pollicis longus and extensor pollicis brevis. This condition affects women 6 times more than men and is also commonly reported in pregnant and lactating women. The natural course of the disease and associated risk factors are not well understood. In this study, we described the gestational risk factors associated with postpartum DQ. METHODS: Sixty-three postpartum women with DQ were included in final study population. Medical records were reviewed for patient characteristics, including age, comorbidities, and body mass index (BMI), and gestational information, including length of pregnancy, gestation number, single or twin birth, and weight at birth. Odds ratio (OR) for developing DQ tenosynovitis were calculated with the control group of 630 postpartum women without DQ who gave birth between 2012 and 2020 in the same district. RESULTS: Length of pregnancy (>40 weeks, OR = 5.81 [3.29-10.28]), first childbirth (OR = 2.23 [1.32-3.77]), and weight (BMI > 25, OR = 2.08 [1.14-3.81]) were all statistically significant risk factors associated with developing DQ. Number of fetuses > 1 (OR = 0.98 [0.29-3.33]) and birth weight more than 3.5 kg (OR = 0.60 [0.30-1.21]) were not associated with higher risk of DQ. CONCLUSIONS: Gestational risk factors associated with developing postpartum DQ include first pregnancy and long pregnancy of more than 40 weeks. Interestingly, child's birthweight and number of fetuses, both factors that might increase load on the first dorsal compartment while holding the child, were not shown to increase the risk of postpartum DQ.

Effect of a Flexor Digitorum Superficialis Hemitenodesis on Reducing Volar Plate Strains for Swan Neck Deformities.

BACKGROUND: Flexor digitorum superficialis (FDS) hemitenodesis is a common procedure to treat swan neck deformity (SND). We hypothesize that this surgical technique is a biomechanically effective way to reduce strain in the volar plate at the proximal interphalangeal joint (PIPJ). METHODS: Fifteen digits from 5 cadaveric specimens were tested using a novel in vitro active finger motion simulator under 4 finger conditions: intact, SND, FDS hemitenodesis, and FDS hemitenodesis with distal interphalangeal (DIP) joint fusion. Tensile loads in FDS and flexor digitorum profundus (FDP) and joint ranges of motion were measured by electromagnetic tracking. In addition, strain gauges were inserted under the volar plate to measure strain during PIPJ hyperextension. Results were analyzed using 1-way repeated-measures analysis of variance tests. RESULTS: The SND condition increased volar plate strain by 176% ± 25% (P < .001) compared with the intact condition. The FDS hemitenodesis repair relieved more than 50% of the SND strain, restoring it to within no statistical difference from intact. The DIP fusion further reduced strain with no further statistical significance. At full flexion, FDS and FDP tendon loads diverged as a function of the test condition (P < .001). With the FDS hemitenodesis, the FDP load increased by 2.1 ± 1.5 N from the SND condition (P < .001), whereas the FDS load decreased by 1.3 ± 1.3 N (P = .012). CONCLUSION: The FDS hemitenodesis repair restored strains to within 3.0 milli-strain of the intact condition with no significant difference. Application of DIP fusion did not further protect the PIPJ from increased hyperextension and further exacerbated the imbalance of flexor tendon loads.

Overutilization of Radiographs for Pulled Elbow Among Orthopedic Surgeons Compared With Pediatricians.

METHODS: Electronic medical records of the largest health provider in Israel, which provides health services to more than 50% of the population, were reviewed for pulled elbow cases between 2005 and 2020. Patients aged 4.5 months to 7 years were included. Demographic information, the discipline of the treating physician, and acquisition of elbow radiographs were gathered. RESULTS: A total of 4357 patients, 62.8% girls, were included. The average body mass index was 16.1 (SD, 1.2). Most patients were from communities in the upper half of the socioeconomic status clusters 6 to 10 (64.63%). Most patients were attended by a pediatrician (51.5%), followed by an orthopedic surgeon (19.9%). Radiographs were acquired for 570 children (13.1%). Most radiographs (36.5%) were requested by orthopedic surgeons and for children in the boundary age groups. The patient's socioeconomic status was associated with access to physicians of different subspecialties, and lower income families had a higher tendency to be treated by nonspecialized physician ( P < 0.001). CONCLUSIONS: Orthopedic surgeons use elbow radiographs much more than pediatricians; effort should aim at reducing the imaging rate for this population.

Single Surgeon versus Co-Surgeons in Primary Total Joint Arthroplasty: Does "Two Is Better than One" Apply to Surgeons?

BACKGROUND: As the demand for total joint arthroplasties (TJA) increases steadily, so does the pressure to train future surgeons and, at the same time, achieve optimal outcomes. We aimed to identify differences in operative times and short-term surgical outcomes of TJAs performed by co-surgeons versus a single attending surgeon. METHODS: A retrospective analysis of 597 TJAs, including 239 total hip arthroplasties (THAs) and 358 total knee arthroplasties (TKAs) was conducted. All operations were performed by one of four fellowship-trained attending surgeons as the primary surgeon. The assisting surgeons were either attendings or residents. RESULTS: In 51% of THA and in 38% of TKA, two attending surgeons were scrubbed in. An additional scrubbed-in attending was not found to be beneficial in terms of surgical time reduction or need for revision surgeries within the postoperative year. This was also true for THAs and for TKAs separately. An attending co-surgeon was associated with a longer hospital stay (p = 0.028). Surgeries performed by fewer surgeons were associated with a shorter surgical time (p = 0.036) and an increased need for blood transfusion (p = 0.033). Neither the rate of intraoperative complications nor revisions differed between groups, regardless of the number of attending surgeons scrubbed in or the total number of surgeons. CONCLUSION: A surgical team comprised of more than a single attending surgeon in TJAs was not found to reduce surgical time, while the participation of residents was not related with worse patient outcomes.

Dynamic Tendon Grip (DTG™) novel knot array compared to traditional sutures for zone two flexor tendon injury - a biomechanical feasibility study.

BACKGROUND: Flexor tendon injuries pose many challenges for the treating surgeon, the principal of which is creating a strong enough repair to allow early active motion, preserving a low-profile of the repair to prevent buckling and subsequent pulley venting. A main concern is that a low-profile repair is prone to gap formation and repair failure. The Dynamic Tendon Grip (DTG™) all suture staple device claims to allow a strong and low-profile repair of the flexor tendon. The purpose of this study is to test the effects of the DTG™ device in early active motion simulation on range of motion, load to failure and gap formation and to compare it to traditional suturing technique. METHODS: Twelve fresh-frozen cadaveric fingers were assigned to two groups: DTG™ device (n = 9) and traditional suturing (double Kessler 4-core suture and a peripheral suture, n = 3). The deep flexor was incised and repaired in zone 2, and active motion simulation was carried out with a cyclic flexion-extension machine. Finger range of motion and gap formation were measured, as well as load to failure and method of repair failure. RESULTS: Following motion simulation, ROM decreased from 244.0 ± 9.9° to 234.5 ± 5.8° for the DTG™ device compared to 234.67 ± 6.51° to 211.67 ± 10.50° for traditional suturing. The DTG™ repair demonstrated gap formation of 0.93 ± 0.18 mm in 3 of 8 specimens after applying 1 kg load, which negated after load removal. Load to failure averaged 76.51 ± 23.15 N for DTG™ and 66.31 ± 40.22 N for the traditional repair. Repair failure occurred as the suture material broke for the DTG™ array and at the knot level for the traditional repair. CONCLUSIONS: The DTG™ all-suture stapling concept achieved a strong low-profile repair in zone 2 flexor tendon injury after active motion simulation. Further clinical studies will be needed to determine the effectiveness of this device compared to traditional techniques.

Mini-Blade Plate to Obtain Length Across Lateral Malleolus Fractures: Surgical Technique and Biomechanical Evaluation.

Background: Restoration of fibular length is the main determinant in preventing mal-union and early ankle arthritis in lateral malleolus fractures. A 1/3 tubular plate fashioned into a mini-blade plate can be used to distract the distal fragment and achieve length in a controlled fashion over time. The purpose of this study was to describe the surgical technique and perform a biomechanical comparison of the blade plate to a locking plate. Methods: A 1/3 tubular plate is fashioned into a 135° blade plate. Blades are seated into the lateral malleolus and a distally directed force is applied on the plate to obtain length.A lateral malleolus fracture was created in 20 cadaveric ankles. The distal fragment was fixed with either a blade plate (BP, n = 10) or a locking plate (LP, n = 10). A distally directed force was applied by an Instron machine and fracture distraction, maximal load and construct stiffness were measured and compared. Results: The average maximal load was 262.06 N compared to 255.52 N for the BP and LP groups, respectively. The maximal distraction was 3.57 mm compared to 4.57 mm for the BP and LP groups, respectively. The loading pattern of the blade plate over time differed from that of a locking plate as the blades seat into bone. Conclusion: A 1/3 tubular mini-blade plate demonstrates biomechanical similarities in terms of load and distraction to the more expensive locking plate. We recommend using this technique for fractures with late presentation or with significant shortening. Level of Evidence: Level V-Mechanism-based reasoning.

How Much Scaphoid Can be Safely Resected? A Biomechanical Analysis of the Effects of Distal Scaphoid Resection.

BACKGROUND: Resection of the distal pole of the scaphoid has been advocated as a simple alternative to other wrist salvage procedures for scaphoid nonunion advanced collapse and scaphotrapezio-trapezoid arthritis. However, the extent of scaphoid that may be resected without adversely affecting carpal kinematics has never been clearly defined. METHODS: Seven cadaveric upper extremities were tested in a custom motion wrist simulator. A 3-stage sequential sectioning of the distal scaphoid protocol was performed in 25% increments then cyclic active wrist flexion-extension and dart thrower's motion trials were recorded. RESULTS: The extent of distal scaphoid resection had no effect on overall wrist range of motion. The lunate assumed a more extended position following resection of the distal scaphoid compared to intact. At 25%, 50%, and 75% of distal scaphoid resection, the lunate extended to 13.32° ± 9.4°, 23.43° ± 7.5°, and 15.81° ± 16.9°, respectively. The capitate migrated proximally with 25% and 50% distal scaphoidectomy, and proximally and radially with 75% of the scaphoid resected. Resection of 75% of the scaphoid resulted in unstable wrist kinematics. CONCLUSIONS: Resection of up to 25% of the distal scaphoid did not significantly influence carpal kinematics and induced mild lunate extension deformity. Resection of 50% of the scaphoid induced further and potentially clinically significant lunate extension and dorsal intercalated segment instability. Further removal of 75% of the distal scaphoid induced capitate migration radially and unpredictable wrist kinematics. Consequently, removal of over 25% of the scaphoid should be avoided or supplemented with partial wrist fusion.

Mid-term clinical and radiographic outcomes of porous-coated metaphyseal sleeves used in revision total knee arthroplasty.

BACKGROUND: The management of bone defects remains one of the major challenges surgeons are faced with in revision total knee arthroplasty (RTKA). Large and uncontained bone defects are traditionally managed with metaphyseal sleeves that facilitate osseointegration and have reported construct stability. While many studies have presented excellent short-term outcomes using metaphyseal sleeves, less is known on their performance in the longer term. The purpose of this study was to present our mid-term results of the metaphyseal sleeves used in patients undergoing RTKA. MATERIALS AND METHODS: Between January 2007 and January 2015, 30 patients underwent RTKA with the use of a CCKMB prosthesis combined with an osteointegrative sleeve. The main indications for RTKA were instability in 40% of the cases (n = 12), aseptic loosening in 30% (n = 9), infection in 26.7% (n = 8), and "other" in 3.3% (n = 1). The minimal follow-up time was 5 years and the mean follow-up time was 82.4 months (SD = 22.6). Clinical outcomes were assessed by Knee Society scores (KSS), range of motion and rate of re-operation. RESULTS: The mean Knee Society score increased significantly from 72.1 preoperatively to 90.0 postoperatively (p < 0.001). The cumulative incidence of re-operation in our study was 13.3% (n = 4). Our study reported no cases of aseptic loosening or mobile-bearing spin-out. Knee flexion to 90° and more was impossible in seven cases (23.3%) preoperatively and in one case (3.3%) postoperatively. CONCLUSION: Porous-coated metaphyseal sleeves demonstrated excellent rates of survivorship and radiographic ingrowth in the mid-term setting. However, further studies are required to assess their outcomes in the long-term.

The effect of four-corner fusion and proximal row carpectomy on uniplanar and multiplanar wrist motion: A biomechanical study.

PURPOSE: To compare changes in wrist kinematics after scaphoidectomy and four-corner fusion (4CF), and proximal row carpectomy (PRC). METHODS: Six cadaveric specimens underwent flexion-extension, radial-ulnar deviation and circumduction in an active motion wrist simulator. Native state, "anatomic 4CF", "radial 4CF", and PRC were compared. RESULTS: Radial 4CF reduced wrist extension, while PRC reduced radial deviation. Fusion groups had similar motion profiles. 44%, 41%, and 32% of native circumduction was maintained in PRC, anatomic, and radial 4CF. CONCLUSIONS: Both fusion positions resulted in comparable motion outcomes. Anatomic 4CF was restricted in wrist extension compared to PRC but provided favourable radial deviation.

Use of Thermoplastic Rings Following Venting of Flexor Tendon Pulleys: A Biomechanical Analysis.

PURPOSE: Normal digital flexion relies on flexor tendon pulleys to convert linear muscular force to angular digital motion. However, there is a growing trend to vent them partially during flexor tendon repair. The objective of this study was to examine the effects of a thermoplastic ring, acting as an external pulley, on flexor tendon biomechanics and finger range of motion (ROM) after pulley venting. METHODS: We tested 15 cadaveric digits using an in vitro active finger motion simulator. We measured loads induced by flexor digitorum superficialis (FDS) and flexor digitorum profundus (FDP) as well as joint ROM with sequential sectioning of the A2, A3, and A4 pulleys compared with an intact pulley condition. At each stage, external thermoplastic pulley rings were applied snugly over the proximal and middle phalanges to recreate A2 and A4 function, respectively. RESULTS: After complete venting of the A2, A3, and A4 pulleys, proximal interphalangeal joint ROM significantly decreased by 13.4° ± 2.7° and distal interphalangeal joint ROM decreased by 15.8° ± 2.1°. Application of external rings over the proximal and middle phalanx resulted in a residual ROM decrease of 8.3° ± 1.9° at the proximal interphalangeal joint and 7.9° ± 2.1° at the distal interphalangeal joint, nearly restoring ROM. Similarly, complete pulley venting resulted in reduced FDS load by 37% and FDP load by 50% compared with intact pulleys. After application of external rings, loads were restored almost to normal, with a 9% reduction for FDS load and 9% reduction for FDP load compared with intact pulleys. CONCLUSIONS: The application of thermoplastic rings acting as external pulleys is an effective, noninvasive, and reproducible approach to restore flexor tendon biomechanics and digit ROM after pulley venting. CLINICAL RELEVANCE: Thermoplastic rings may be a useful therapeutic adjunct in restoring joint ROM and flexor tendon loads after surgical venting of the pulleys.

Medium-term outcome and classification of traumatic anterior hip dislocations.

INTRODUCTION: Traumatic anterior hip dislocations are subdivided to obturator (inferior) and pubic (superior) dislocations by Epstein's descriptive classification. This rare injury is thought to have favourable clinical outcomes. The incidence of associated femoral head and acetabular injuries has been low in past case series. We sought to revisit this injury and classification in the era of advanced imaging and contemporary surgical techniques. MATERIALS AND METHODS: A retrospective study of 15 patients treated for anterior hip dislocation was performed. Medical records were reviewed for demographic and surgical data. Imaging studies were revisited to determine direction of dislocation and associated fractures. Patients were assessed for pain, hip function using the modified Harris Hip Score (mHHS), hip range of motion and radiographic changes. Mean follow-up time was 3 years. RESULTS: Anterior dislocation occurred in an obturator (inferior), pubic (superior) or central direction. 9 patients had concomitant femoral head impaction and 7 patients suffered from acetabular fractures. 8 patients with an anterior hip dislocation underwent surgical treatment. This therapy, along with early range of motion and weight bearing, produced favourable clinical outcomes with 9 patients reporting no pain and an average mHHS of 83.8. 6 patients had heterotopic ossification at latest follow-up. CONCLUSIONS: Traumatic anterior hip dislocation is commonly associated with femoral head impaction and acetabular injuries which should be addressed operatively when appropriate to produce favourable results. In this paper, we propose a revision to the commonly used descriptive classification system.

A Multicenter Retrospective Study With a Minimum 5-Year Follow-up Comparing Arthroscopic Bankart Repair and the Latarjet Procedure.

BACKGROUND: Arthroscopic Bankart repair (ABR) and the Latarjet procedure are surgical techniques commonly used to treat anterior shoulder instability. There is no consensus among shoulder surgeons regarding the indications for choosing one over the other. PURPOSE: To compare the results of the Latarjet procedure with those of ABR for the treatment of anterior shoulder instability. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Data on all patients who were treated surgically for recurrent anterior shoulder instability between 2006 and 2011 were retrospectively collected at 4 medical centers. The minimum follow-up was 5 years. Data were retrieved from medical charts, and patients were interviewed to assess their level of satisfaction (range, 0-100), functional outcomes (using the American Shoulder and Elbow Surgeons shoulder score; the Subjective Shoulder Value; and the Disabilities of the Arm, Shoulder and Hand score), and quality of life (using the 12-Item Short Form Health Survey [SF-12]). Information on return to sports activities and postoperative level of activity compared with that of the preinjury state, complications, reoperations, and recurrent instability were recorded and evaluated. RESULTS: A total of 242 patients were included. The Latarjet procedure was performed in 27 shoulders, and ABR was performed in 215 shoulders. Patients in the ABR group had significantly higher rates of redislocation (18.5%; P = .05) and subluxation (21.4%; P = .43) but a lower rate of self-reported apprehension (43.0%; P = .05) compared with patients in the Latarjet group (3.7%, 14.8%, and 63.0%, respectively). There were 5 patients in the ABR group who underwent reoperation with the Latarjet procedure because of recurrent instability. The functional scores in the Latarjet group were better than those in the ABR group. The SF-12 physical score was significantly better in the Latarjet group than in the ABR group (98.1 vs 93.9, respectively; P = .01). Patient satisfaction and subjective scores were similar in both groups. CONCLUSION: These results support recently published data on the Latarjet procedure that showed its superiority over ABR in midterm stability (dislocations or subluxations). The contribution of self-reported apprehension to the broad definition of stability is not clear, and apprehension rates were not correlated with satisfaction scores or the recurrence of dislocation or subluxation.

Evaluation of hollow mesh augmentation on the biomechanical properties of the flexor tendon repaired with modified Kessler technique.

PURPOSE: The aim of the study was to test flexor tendon repair with a novel hollow mesh suture augmentation served as a centre core cable [Triple-C (Tri-C)] in an in vitro study using a turkey model. METHODS: Forty long digits from white turkey feet were divided into the following four groups based on repair techniques: Group 0, intact tendon without repair; Group 1, modified Kessler (MK) repair only (MKo); Group 2, MK repair plus Tri-C (MK â€‹+ â€‹Tri-C); and Group 3, MK repair plus an additional outside knot plus Tri-C (MK-2knots â€‹+ â€‹Tri-C). Mechanical evaluations were performed for all groups. RESULTS: The frictions of the two groups with Tri-C were not significantly different than those of the MKo group. The ultimate tensile strength of the MK â€‹+ â€‹Tri-C group was not significantly different from that of the MKo group or the MK-2knots â€‹+ â€‹Tri-C group. In contrast, the MK-2knots â€‹+ â€‹Tri-C group had a significantly greater ultimate tensile strength compared with that of the MKo group. Forces at 2-mm gap formation in the groups with Tri-C were significantly stronger than that of MK alone. CONCLUSION: Our data have demonstrated that MK repair augmented with the centre hollow mesh suture increased failure strength without inducing increased friction. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: Our study elucidates that a Tri-C augmentation designed in this study can achieve mechanical enhancements without increasing the repaired tendon friction. Hence, this novel technique has potential biological validity and clinical application.

Safe Zones for Cerclage Wiring of the Humeral Diaphysis.

Cerclage wiring of the humeral diaphysis entails particular danger to the radial nerve and the deep brachial artery. We sought to delineate safe zones for minimally invasive cerclage wiring of the humeral diaphysis, specifically in relation to the radial nerve and accompanying vasculature. Cerclage wires were percutaneously inserted into three groups of fresh-frozen cadaveric humeri. Group 1-proximal midshaft humerus at 30% of humeral height (n = 4); Group 2-midshaft spiral groove at 45% of humeral height (n = 4); and Group 3-distal midshaft humerus at 60% of humeral height (n = 4). Subsequently, an extensive surgical exploration of the arteries and nerves around the humerus was performed, noting any disturbance to the vessels or nerves and measuring the distance from the cerclage wire to the radial nerve. Neurovascular structures were injured in 75% of specimens when the cerclage wire was inserted at the level of the spiral groove. Both posterior structures, e.g. the radial nerve and the deep brachial artery, and medial structures, e.g., the median nerve and brachial artery, were incarcerated. Application of the cerclage at 30% or 60% of humeral height did not cause neurovascular injury. Minimally invasive application of the cerclage wire at the spiral groove, which is at 45% of humeral height, is likely to cause injury to neurovascular structures. Application of the cerclage at the proximal or distal midshaft humeral areas is associated with less risk of such injury. Clin. Anat. 33:552-557, 2020. © 2019 Wiley Periodicals, Inc.

3D imaging and stealth navigation instead of CT guidance for radiofrequency ablation of osteoid osteomas: a series of 52 patients.

BACKGROUND: Osteoid osteomas are benign bone neoplasms that may cause severe pain and limit function. They are commonly treated by radiofrequency ablation (RFA) through a needle inserted into the nidus of the lesion under CT guidance, which is associated with exposure of young patients to relatively high dose of radiation. The objective of this study was to investigate the amount of radiation, effectiveness and safety of an alternative imaging approach, the 3D image-guided (O-arm) technology and the Stealth navigation. METHODS: We retrospectively reviewed 52 electronic medical files of patients (mean age 24.7 years, range 8-59 years) who were treated with thermal ablation of benign osteoid osteomas guided by the navigated O-arm-assisted technique in our institution between 2015 and 2017. Data were extracted on the associated complications, the reduction in pain at 3 months and one year postoperatively, and the amount of radiation administered during the procedure. RESULTS: The level of pain on a visual analogue scale decreased from the preoperative average of 7.73 to 0 at the 3-month follow-up. The mean dose-length product was 544.7 mGycm2 compared to the reported radiation exposure of 1971-7946 mGycm2 of CT-guided radio ablations. The one intra-operative complication was a superficial burn in the subcutaneous lesion in a tibia that was treated locally with no major influence on recovery. CONCLUSIONS: RFA ablation guided by 3D O-arm stealth navigation is as effective as the traditional CT-guided technique with the advantage of lower radiation exposure. TRIAL REGISTRATION: Retrospective study number 0388-17-TLV at Tel Aviv Sourasky Medical Center IRB, approved at 25.10.17.