Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Mais filtros








Base de dados
Intervalo de ano de publicação
1.
J Vis Exp ; (139)2018 09 12.
Artigo em Inglês | MEDLINE | ID: mdl-30272665

RESUMO

Extending operating voltage of Li-ion batteries results in higher energy output from these devices. High voltages, however, may trigger or accelerate multiple processes responsible for long-term performance decay. Given the complexity of physical processes occurring inside the cell, it is often challenging to achieve a full understanding of the root causes of this performance degradation. This difficulty arises in part from the fact that any electrochemical measurement of a battery will return the combined contributions of all components in the cell. Incorporation of a reference electrode can solve part of the problem, as it allows the electrochemical reactions of the cathode and the anode to be individually probed. A variation in the voltage range experienced by the cathode, for example, can indicate alterations in the pool of cyclable lithium ions in the full-cell. The structural evolution of the many interphases existing in the battery can also be monitored, by measuring the contributions of each electrode to the overall cell impedance. Such wealth of information amplifies the reach of diagnostic analysis in Li-ion batteries and provides valuable input to the optimization of individual cell components. In this work, we introduce the design of a test cell able to accommodate multiple reference electrodes, and present reference electrodes that are appropriate for each specific type of measurement, detailing the assembly process in order to maximize the accuracy of the experimental results.


Assuntos
Espectroscopia Dielétrica/métodos , Eletrodos
2.
ACS Appl Mater Interfaces ; 9(50): 43623-43631, 2017 Dec 20.
Artigo em Inglês | MEDLINE | ID: mdl-29182297

RESUMO

In the evaluation of compatibility of different components of cell for high-energy and extreme-conditions applications, the highly focused are positive and negative electrodes and their interaction with electrolyte. However, for high-temperature application, the other components are also of significant influence and contribute toward the total health of battery. In present study, we have investigated the behavior of aluminum, the most common current collector for positive electrode materials for its electrochemical and temperature stability. For electrochemical stability, different electrolytes, organic and room temperature ionic liquids with varying Li salts (LiTFSI, LiFSI), are investigated. The combination of electrochemical and spectroscopic investigations reflects the varying mechanism of passivation at room and high temperature, as different compositions of decomposed complexes are found at the surface of metals.

3.
ACS Appl Mater Interfaces ; 7(46): 25777-83, 2015 Nov 25.
Artigo em Inglês | MEDLINE | ID: mdl-26535786

RESUMO

Rechargeable batteries capable of operating at high temperatures have significant use in various targeted applications. Expanding the thermal stability of current lithium ion batteries requires replacing the electrolyte and separators with stable alternatives. Since solid-state electrolytes do not have a good electrode interface, we report here the development of a new class of quasi-solid-state electrolytes, which have the structural stability of a solid and the wettability of a liquid. Microflakes of clay particles drenched in a solution of lithiated room temperature ionic liquid forming a quasi-solid system has been demonstrated to have structural stability until 355 °C. With an ionic conductivity of ∼3.35 mS cm(-1), the composite electrolyte has been shown to deliver stable electrochemical performance at 120 °C, and a rechargeable lithium battery with Li4Ti5O12 electrode has been tested to deliver reliable capacity for over several cycles of charge-discharge.

4.
ACS Nano ; 8(8): 7763-70, 2014 Aug 26.
Artigo em Inglês | MEDLINE | ID: mdl-25054222

RESUMO

A simple and scalable method of decorating 3D-carbon nanotube (CNT) forest with metal particles has been developed. The results observed in aluminum (Al) decorated CNTs and copper (Cu) decorated CNTs on silicon (Si) and Inconel are compared with undecorated samples. A significant improvement in the field emission characteristics of the cold cathode was observed with ultralow turn on voltage (Eto ∼ 0.1 V/µm) due to decoration of CNTs with metal nanoparticles. Contact resistance between the CNTs and the substrate has also been reduced to a large extent, allowing us to get stable emission for longer duration without any current degradation, thereby providing a possibility of their use in vacuum microelectronic devices.

5.
Sci Rep ; 3: 1891, 2013.
Artigo em Inglês | MEDLINE | ID: mdl-23712556

RESUMO

Growth of vertically aligned carbon nanotube (CNT) forests is highly sensitive to the nature of the substrate. This constraint narrows the range of available materials to just a few oxide-based dielectrics and presents a major obstacle for applications. Using a suspended monolayer, we show here that graphene is an excellent conductive substrate for CNT forest growth. Furthermore, graphene is shown to intermediate growth on key substrates, such as Cu, Pt, and diamond, which had not previously been compatible with nanotube forest growth. We find that growth depends on the degree of crystallinity of graphene and is best on mono- or few-layer graphene. The synergistic effects of graphene are revealed by its endurance after CNT growth and low contact resistances between the nanotubes and Cu. Our results establish graphene as a unique interface that extends the class of substrate materials for CNT growth and opens up important new prospects for applications.


Assuntos
Cobre/química , Grafite/química , Nanotubos de Carbono , Níquel/química , Óxidos/química , Catálise , Eletroquímica , Teste de Materiais , Propriedades de Superfície
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA