High-Spatial-Resolution Multimodal Imaging by Tapping-Mode Scanning Probe Electrospray Ionization with Feedback Control.

Direct extraction and ionization techniques using minute amounts of solvent can be employed for the rapid analysis of chemical components in a sample without any sample preparation steps. This type of approach is important for mass spectrometry imaging of samples with multiple chemical components that have different spatial distributions (i.e., biological tissues). To improve the spatial resolution of such imaging, it is necessary to reduce the solvent volume for extraction and deliver it to the sample surface. This report describes a feedback control system applied to tapping-mode scanning probe electrospray ionization. By combining the measurement technique of capillary probe vibration with the dynamic distance control system between the probe and the sample, the vibration amplitude of the probe is maintained while the probe scans over uneven samples. This method allows simultaneous high-resolution imaging of molecular distribution, surface topography, and amplitude/phase changes in the probe vibration. Such multimodal imaging is demonstrated on rhodamine B thin films in microwells and on a mouse brain tissue section. This technique can generally be applied to examine the multidimensional molecular distribution and the surface profiles of various objects.

Visualization of Sampling and Ionization Processes in Scanning Probe Electrospray Ionization Mass Spectrometry.

Ambient sampling and ionization techniques based on direct liquid extraction and electrospray ionization are of great value for rapid analysis and mass spectrometry imaging. Scanning probe electrospray ionization (SPESI) enables the sampling and ionization of analyte molecules in a solid material using a liquid bridge and electrospray, respectively, from a single capillary probe. To further improve SPESI, it is essential to understand the dynamic behavior of nanoliter volumes of liquids during sampling and ionization. In this study, the dynamic formation and breakage of the liquid bridge and the subsequent electrospray ionization were investigated by measuring the displacement of the capillary probe using a new optical technique. Measurements revealed that both the time from the formation of the liquid bridge to its breakage and the time from the breakage of the liquid bridge to the detection of analyte ions were correlated with the physical properties of the solvent. It was also found that both of these times were positively correlated with the flow rate. These results will not only lead to the improvement of sampling and ionization efficiencies but also afford a greater understanding of the physicochemical properties of charged nanoliter volumes of liquids.