Clarification of the Antagonistic Effect of the Lipopeptides Produced by Bacillus amyloliquefaciens BPD1 against Pyricularia oryzae via In Situ MALDI-TOF IMS Analysis.

This study tried to clarify the antagonistic effect of the lipopeptides secreted by Bacillus amyloliquefaciens strain BPD1 (Ba-BPD1) against Pyricularia oryzae Cavara (PO). To determine the major antifungal lipopeptides effective against PO, single and dual cultures were carried out in solid-state media. The matrix-assisted laser desorption/ionization-time of flight imaging mass spectrometry (MALDI-TOF IMS) was used to identify the most effective lipopeptide in situ. Meanwhile, the morphology of pathogen fungi treated with lipopeptides was observed via the SEM. Of the three lipopeptide families, surfactin, iturin, and fengycin, the last was identified as the most effective for inhibiting mycelium growth and conidial germination of PO. The conidia and hyphae of fengycin-treated PO were shown to become deformed and tumorous under exposure. This study provides insights into the antagonistic effect of Ba-BPD1 against fungal phytopathogens. Such insights are helpful in the development of reagents for biological control applications.

Enhanced bioconversion rate and released substrate inhibition in (R)-phenylephrine whole-cell bioconversion via partial acetone treatment.

An approach was developed to enhance the efficiency for the bioconversion of 1-(3-hydroxyphenyl)-2-(methyamino)-ethanone to (R)-phenylephrine. The strain Serratia marcescens N10612, giving the benefit of 99% enantiomeric excess in (R)-PE conversion, was used. The fermentation was devised to harvest cells with high hydrophobic prodigiosin content inside the cells. Then, the partial acetone extraction was applied to remove prodigiosin from the cells. The treatment was found to increase the cells conversion rate without loss of the cells NADPH redox system. When using 50% (v/v) acetone for 5min, the processed cells can give a specific conversion rate of 16.03µmol/h/g-cells. As compared the treated cells with cells under the basal medium, the maximum reaction rate (Vmax) increased from 6.69 to 10.27 (µmol/h/g-cells), the dissociation constant (Km) decreased from 0.236 to 0.167mM and the substrate inhibition constant (KSi) increased from 0.073 to 1.521mM. The 20-fold increase in substrate inhibition constant referred to a great release from the substrate inhibition for the use of S. marcescens N10612 in the bioconversion, which would greatly benefit the bioconversion to be industrialized.

Antibacterial Peptide CecropinB2 Production via Various Host and Construct Systems.

Cecropin is a cationic antibacterial peptide composed of 35-39 residues. This peptide has been identified as possessing strong antibacterial activity and low toxicity against eukaryotic cells, and it has been claimed that some types of the cecropin family of peptides are capable of killing cancer cells. In this study, the host effect of cloning antibacterial peptide cecropinB2 was investigated. Three different host expression systems were chosen, i.e., Escherichia coli, Bacillus subtilis and Pichia pastoris. Two gene constructs, cecropinB2 (cecB2) and intein-cecropinB2 (INT-cecB2), were applied. Signal peptide and propeptide from Armigeres subalbatus were also attached to the gene construct. The results showed that the best host for cloning cecropinB2 was P. pastoris SMD1168 harboring the gene of pGAPzαC-prepro-cecB2 via Western blot confirmation. The cecropinB2 that was purified using immobilized-metal affinity chromatography resin showed strong antibacterial activity against the Gram-negative strains, including the multi-drug-resistant bacteria Acinetobacter baumannii.

Ultrasound-assisted (R)-phenylephrine whole-cell bioconversion by S. marcescens N10612.

The strain Serratia marcescens N10612 is used to perform the bioconversion of 1-(3-hydroxyphenyl)-2-(methyamino)-ethanone (HPMAE) to (R)-phenylephrine ((R)-PE), which is an ephedrine drug substitute. The use of an ultrasound approach is found to improve the efficiency of the (R)-PE bioconversion. The optimization of the (R)-PE bioconversion is carried out by means of statistical experiment design. The optimal conditions obtained are 1.0mM HPMAE, 18.68 g/L glucose and ultrasound power of 120 W, where the predicted specific rate of the (R)-PE bioconversion is 31.46 ± 2.22 (ìmol/h/g-cells) and the experimental specific rate is 33.27 ± 1.46 (ìmol/h/g-cells), which is 3-fold higher than for the operation under ultrasound power of 200 W (11.11 ìmol/h/g-cells) and 4.3-fold higher than for the shaking operation (7.69 ìmol/h/g-cells). The kinetics study of the bioconversion also shows that under the ultrasound operation, the optimal rate (Vmax) of the (R)-PE bioconversion increases from 7.69 to 11.11 (µmol/h/g-cells) and the substrate inhibition constant (KSi) increases from 1.063 mM for the shaking operation to 1.490 mM for ultrasound operation.

Development of an enzymatic chromatography strip with nicotinamide adenine dinucleotide-tetrazolium coupling reactions for quantitative l-lactate analysis.

In this study, a dry assay of l-lactate via the enzymatic chromatographic test (ECT) was developed. An l-lactate dehydrogenase plus a nicotinamide adenine dinucleotide (NADH) regeneration reaction were applied simultaneously. Various tetrazolium salts were screened to reveal visible color intensities capable of determining the lactate concentrations in the sample. The optimal analysis conditions were as follows. The diaphorase (0.5 µl, 2(-6)U/µl) was immobilized in the test line of the ECT strip. Nitrotetrazolium blue chloride (5 µl, 12 mM), l-lactate dehydrogenase (1 µl, 0.25U/µl), and NAD(+) (2µl, 1.5×10(-5)M) were added into the mobile phase (100 µl) composed of 0.1% (w/w) Tween 20 in 10mM phosphate buffer (pH 9.0), and the process was left to run for 10 min. This detection had a linear range of 0.039 to 5mM with a detection limit of 0.047 mM. This quantitative analysis process for l-lactate was easy to operate with good stability and was proper for the point-of-care testing applications.

Production of D-hydantoinase via surface display and self-cleavage system.

In this study, the cell surface expression system was the first time used to directly produce extracellular enzyme. In the plasmid construction, the truncated ice nucleation protein (INP) was fused with intein (INT) and target protein, D-hydantoinase (DHTase), to form the INP-INT-DHTase gene. The plasmid containing this gene was transformed into Escherichia coli ER2566 cells. The gene construct enables the expression of INP-INT-DHTase fusion protein, which might anchor on cell membrane surface. The induction conditions were studied and optimal conditions were as follows: E. coli ER2566 was incubated at 37°C and 200 rpm till OD600 reached 0.6. Then, 0.05 mM IPTG was added and the induction was conducted at 15°C for 24 h. The cell was harvested and resuspended in the cleavage buffer (50 mM Tris-HCl buffer, pH 6). The cleavage reaction was carried out at 25°C, and 100 rpm for 24 h. The DHTase with an activity of 0.225 U/ml and a purity of 63.2% was obtained via centrifugation. This study demonstrated the feasibility of direct extracellular enzyme production using E. coli via only two steps of centrifugation.

Lipase-immobilized biocatalytic membranes for biodiesel production.

Microbial lipase from Candida rugosa (Amano AY-30) has good transesterification activity and can be used for biodiesel production. In this study, polyvinylidene fluoride (PVDF) membrane was grafted with 1,4-diaminobutane and activated by glutaraldehyde for C. rugosa lipase immobilization. After immobilization, the biocatalytic membrane was used for producing biodiesel from soybean oil and methanol via transesterification. Response Surface Methodology (RSM) in combination with a 5-level-5-factor central composite rotatable design (CCRD) was employed to evaluate the effects of reaction time, reaction temperature, enzyme amount, substrate molar ratio and water content on the yield of soybean oil methyl ester. By ridge max analysis, the predicted and experimental yields under the optimum synthesis conditions were 97% and 95%, respectively. The lipase-immobilized PVDF membrane showed good reuse ability for biodiesel production, enabling operation for at least 165 h during five reuses of the batch, without significant loss of activity.

Mutational analysis of splicing activities of ribonucleotide reductase α subunit protein from lytic bacteriophage P1201.

A CP1201 RIR1 intein is found in the ribonucleotide reductase alpha subunit (RNR α subunit) protein of lytic bacteriophage P1201 from Corynebacterium glutamicum NCHU 87078. This intein can be over-expressed and spliced in Escherichia coli NovaBlue cells. Mutations of C539, the N-terminal residue of the C-extein in the CP1201 RIR1 protein, led to the changes of pattern and level of protein-splicing activities. A G392S variant was found to be a temperature-sensitive protein with complete splicing activity at 17 and 28°C but not at 37°C or higher. We also found that the cleavage at the CP1201 RIR1 intein C-terminus of the double mutant G392S/C539G was blocked, but other cleavage activities could be efficiently performed at 17°C. G392S/C539G variant possessed the properties of low-temperature-induced cleavage at the intein N-terminus.

Biochemical characterization of two thymidylate synthases in Corynebacterium glutamicum NCHU 87078.

The genome of Corynebacterium glutamicum NCHU 87078 contains two putative thymidylate synthase genes, designated CgthyA and CgthyX. These two genes were expressed in Escherichia coli NovaBlue and the expressed His(6)-tagged enzymes were purified by nickel-chelate chromatography. The purified CgThyA had a specific activity of 414 mU mg(-)(1) protein, whereas thymidylate synthase activity for CgThyX could not be detected in a functional complementation assay using a 10-day incubation period. Gel filtration chromatography and chemical cross-linking experiments showed that CgThyX may exist as a dimer in solution, unlike a typical ThyX protein with homotetrameric structure for catalytic activity. Spectroscopic analysis indicated that purified CgThyX lacked the cofactor FAD. The 2.3A resolution crystal structure of CgThyX-FAD demonstrated a loose tetramer, in which FAD is chelated between the subunits via a manner distinct from that of other flavin-dependent thymidylate synthases. Structure-based mutational studies have identified a non-conserved segment (residues 70-73) of CgThyX protein with crucial role in binding to FAD. Taken together, our biochemical and structural analyses highlight unique features of the C. glutamicum ThyX that distinguish this enzyme from ThyX proteins from other organisms. Our results also suggest that thymidylate synthesis in C. glutamicum requires ThyA but not ThyX.

Genome sequence of the lytic bacteriophage P1201 from Corynebacterium glutamicum NCHU 87078: evolutionary relationships to phages from Corynebacterineae.

P1201 is a lytic corynephage of Corynebacterium glutamicum NCHU 87078. Its genome consists of a linear double-stranded DNA molecule of 70,579 base pairs, with 3'-protruding cohesive ends of ten nucleotides. We have identified 69 putative open reading frames, including three apparent genes (thymidylate synthase, terminase, and RNR alpha subunit genes) that are interrupted by an intein. Protein-splicing activities of these inteins were demonstrated in Escherichia coli. Three structural proteins including major capsid and major tail proteins were separated by SDS-PAGE and identified by both LC-MS-MS and N-terminal sequence analyses. Bioinformatics analysis indicated that only about 8.7% of its putative gene products shared substantial protein sequence similarity with the lytic corynephage BFK20 from Brevibacterium flavum, the only corynephage whose genome had been sequenced to date, revealing that the P1201 genome is distinct from BFK20. The mosaic-like genome of P1201 indicates extensive horizontal gene transfer among P1201, Gordonia terrae phage GTE5, mycobacteriophages, and several regions of Corynebacterium spp. genomes.

Characterization of a bifunctional aminoacylase/carboxypeptidase from radioresistant bacterium Deinococcus radiodurans R1.

The gene encoding a Deinococcus radiodurans R1 bifunctional aminoacylase/carboxypeptidase (DR_ACY/CP) was amplified by polymerase chain reaction and cloned into pQE-30 to generate pQE-DRAC. The cloned gene consists of an open reading frame of 1197 bp encoding a protein with a molecular mass of 42,729 Da. The predicted amino acid sequence shows high homology with those of Geobacillus kaustophilus aminoacylase, Geobacillus stearothermophilus aminoacylase, Pyrococcus horikoshii carboxypeptidase/aminoacylase and Thermoanaerobacter tengcongensis aminoacylase/carboxypeptidase. The expressed enzyme was purified from the crude extract of IPTG-induced Escherichia coli M15 (pQE-DRAC) to homogeneity by nickel-chelate chromatography. The molecular mass of the purified enzyme was determined to be 43kDa by SDS-PAGE. Maximal aminoacylase activity with N-acetyl-methionine as the substrate occurred at pH 8.0 and 40 degrees C in the sodium phosphate buffer. The aminoacylase activity was strongly inhibited by metal-chelating agents, and was largely restored by divalent cations, such as Co(2+), Mn(2+) and Ni(2+). The purified enzyme had broad specificity toward N-acetylated L-amino acids as well as N-CBZ-peptides. Carboxypeptidase activity of DR_ACY/CP to N-CBZ-Gly-Ala exhibited K(m) and k(cat) values of 4.3mM and 28s(-1), respectively. The enzyme also had activity toward the cell wall-related substrates, D-Ala-Gly, D-Ala-Gly-Gly and L-Orn-L-Ala.

Phylogenetic analysis and biochemical characterization of a thermostable dihydropyrimidinase from alkaliphilic Bacillus sp. TS-23.

Two degenerate primers established from the alignment of highly conserved amino acid sequences of bacterial dihydropyrimidinases (DHPs) were used to amplify a 330-bp gene fragment from the genomic DNA of Bacillus sp. TS-23 and the amplified DNA was successfully used as a probe to clone a dhp gene from the strain. The open reading frame of the gene consisted of 1422 bp and was deduced to contain 472 amino acids with a molecular mass of 52 kDa. The deduced amino acid sequence exhibited greater than 45% identity with that of prokaryotic D-hydantoinases and eukaryotic DHPs. Phylogenetic analysis showed that Bacillus sp. TS-23 DHP is grouped together with Bacillus stearothermophilus D-hydantoinase and related to dihydroorotases and allantoinases from various organisms. His6-tagged DHP was over-expressed in Escherichia coli and purified by immobilized metal affinity chromatography to a specific activity of 3.46 U mg(-1) protein. The optimal pH and temperature for the purified enzyme were 8.0 and 60 degrees C, respectively. The half-life of His6-tagged DHP was 25 days at 50 degrees C. The enzyme activity was stimulated by Co2+ and Mn2+ ions. His6-tagged DHP was most active toward dihydrouracil followed by hydantoin derivatives. The catalytic efficiencies (kcat/Km) of the enzyme for dihydrouracil and hydantoin were 2.58 and 0.61 s(-1) mM(-1), respectively.