A nomogram for predicting the risk of temporomandibular disorders in university students.

OBJECTIVES: Temporomandibular disorders (TMDs) have a relatively high prevalence among university students. This study aimed to identify independent risk factors for TMD in university students and develop an effective risk prediction model. METHODS: This study included 1,122 university students from four universities in Changchun City, Jilin Province, as subjects. Predictive factors were screened by using the least absolute shrinkage and selection operator (LASSO) regression and the machine learning Boruta algorithm in the training cohort. A multifactorial logistic regression analysis was used to construct a TMD risk prediction model. Internal validation of the model was conducted via bootstrap resampling, and an external validation cohort comprised 205 university students undergoing oral examinations at the Stomatological Hospital of Jilin University. RESULTS: The prevalence of TMD among university students was 44.30%. Ten predictive factors were included in the model, comprising gender, facial cold stimulation, unilateral chewing, biting hard or resilient foods, clenching teeth, grinding teeth, excessive mouth opening, malocclusion, stress, and anxiety. The model demonstrated good predictive ability with area under the receiver operating characteristic curve (AUC) values of 0.853, 0.838, and 0.821 in the training cohort, internal validation cohort, and external validation cohort, respectively. The calibration curves demonstrated that the predicted results were consistent with the actual results, and the decision curve analysis (DCA) indicated the model's high clinical utility. CONCLUSIONS: An online nomogram of TMD in university students with good predictive performance was constructed, which can effectively predict the risk of TMD in university students. The model provides a useful tool for the early identification and treatment of TMDs in university students, helping clinicians to predict the probability of TMDs in each patient, thus providing more personalized and accurate treatment decisions for patients.

The displacement of teeth and stress distribution on periodontal ligament under different upper incisors proclination with clear aligner in cases of extraction: a finite element study.

OBJECTIVES: To investigate the displacement of dentition and stress distribution on periodontal ligament (PDL) during retraction and intrusion of anterior teeth under different proclination of incisors using clear aligner (CA) in cases involving extraction of the first premolars. METHODS: Models were constructed, consisting of the maxilla, PDLs, CA and maxillary dentition without first premolars. These models were then imported to finite element analysis (FEA) software. The incisor proclination determined the division of the models into three groups: Small torque (ST) with U1-SN = 100°, Middle torque (MT) with U1-SN = 110°, and High torque (HT) with U1-SN = 120°. Following space closure, a 200 g intrusion force was applied at angles of 60°, 70°, 80°, and 90° to the occlusal plane, respectively. RESULTS: CA therapy caused lingual tipping and extrusion of incisors, mesial tipping and intrusion of canines, and mesial tipping of posterior teeth in each group. As the proclination of incisors increased, the incisors presented more extrusion and minor retraction, and the teeth from the canine to the second molar displayed an increased tendency of intrusion. The peak Von Mises equivalent stress (VMES) value successively decreased from the central incisor to the canine and from the second premolar to the second molar, and the VMES of the second molar was the lowest among the three groups. When the angle between the intrusion force and occlusal plane got larger, the incisors exhibited greater intrusion but minor retraction. CONCLUSIONS: The "roller coaster effect" usually occurred in cases involving premolar extraction with CA, especially in patients with protruded incisors. The force closer to the vertical direction were more effective in achieving incisor intrusion. The stress on PDLs mainly concentrated on the cervix and apex of incisors during the retraction process, indicating a possibility of root resorption.

Three-dimensional finite element study of mandibular first molar distalization with clear aligner.

OBJECTIVES: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar. METHODS: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed. RESULTS: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased. CONCLUSIONS: The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.

Mandibular advancement with clear aligners and functional appliances in the treatment of skeletal Classâ ¡malocclusion: a systematic review and meta-analysis.

OBJECTIVES: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group. METHODS: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis. RESULTS: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group. CONCLUSIONS: The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.

Repair of rotator cuff tears in patients aged 75 years and older: Does it make sense? A systematic review.

Background: Rotator cuff injuries are common, and morbidity increases with age. The asymptomatic full-thickness tear rate is 40% in the over 75-year-old population. Purpose: This study aimed to systematically review the literature on the outcomes of rotator cuff repair among >75 years old patients. Study design: Systematic review. Methods: A systematic review of the literature was performed following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. A literature search was performed in the electronic databases of PubMed, Medline, Embase, and The Cochrane Library. Studies in English evaluating repair of full-thickness rotator cuff tears in patients aged >75 years were included. Results: Six studies were reviewed, including 311 patients (313 shoulders) treated with arthroscopic and/or open rotator cuff repair. Sixty-one patients were lost to follow-up, leaving 252 shoulders with outcome data. Patients in this age group demonstrated a significant improvement in the clinical and functional scores after rotator cuff repair, with a high satisfaction rate. The mean American Shoulder and Elbow Surgeons scores improved from 43.8 (range, 42.0-45.5) preoperatively to 85.3 (range, 84.0 to 86.5) postoperatively, and the mean Constant scores improved from 45.4 (range, 34.7-55.5) to 78.6 (range, 67.0-91.6). Pain, evaluated in all studies by the visual analog scale for pain, showed a significant improvement at the last follow-up compared with the mean preoperative score. Furthermore, range of motion and return to daily activities and sports gained marked improvements. Conclusion: Rotator cuff repair in patients aged >75 years could achieve high clinical success rates with good outcomes and pain relief. Although patients in this age group are at a high risk of retear, rotator cuff repair may offer a good option with significant functional and clinical improvement.