Investigation of photothermal treatment with 532 nm laser light on laryngeal cancer in an in vivo tumor model.

Laryngeal cancer is the second most common cancer in the upper aerodigestive tract, with its incidence increasing across all ages. The conventional treatments for laryngeal cancer include surgical procedure, radiation, and chemotherapy; however, these treatments can lead to various complications. Photothermal therapy (PTT) using laser light has been employed form cancer effective treatment because of its minimal invasion and short operation time. The current study aims to investigate the feasibility of 532 nm PTT on laryngeal cancer in an invivo tumor model. Ex vivo dosimetry evaluation was conducted to determine the laser irradiation conditions, and HEP-2 tumor bearing mice were used to demonstrate in vivo photothermal effects. In addition, histology and western blot analysis were conducted to verify tumor necrosis and any changes in cancer-associated factors in the tumor tissues. The current in vivo results showed that PTT at 5 W for 40 s and 20 W for 10 s had comparable effects in terms of temperature increase and tumor removal. The 532 nm PTT significantly decreased the remaining tumor and downregulated the expression levels of MMP- 9 and ERK. The current study demonstrated that the 532 nm PTT could be a feasible option for treatment of laryngeal tumor with high power delivery for a short exposure time. Further investigations will confirm the endoscopic application of the 532 nm PTT for the treatment of intralaryngeal tissue prior to clinical translation.

High-Efficiency, Prevascularization-Free Macroencapsulation System for Subcutaneous Transplantation of Pancreatic Islets for Enhanced Diabetes Treatment.

Pancreatic islet macroencapsulation systems for subcutaneous transplantation have garnered significant attention as a therapy for Type I diabetes due to their minimal invasiveness and low complication rates. However, the low vascular density of subcutaneous tissue threatens the long-term survival of islets. To address this issue, prevascularized systems are introduced but various challenges remain, including system complexity and vascular-cell immunogenicity. Here, a novel prevasculature-free macroencapsulation system designed as a multilayer sheet, which ensures sufficient mass transport even in regions with sparse vasculature, is presented. Islets are localized in top/bottom micro-shell layers (≈300 µm thick) to maximize proximity to the surrounding host vasculature. These sheets, fabricated via bioprinting using rat islets and alginate-based bio-ink, double islet viability and optimize islet density, improving insulin secretion function by 240%. The subcutaneous transplantation of small islet masses (≈250 islet equivalent) into diabetic nude mice enable rapid (<1 day) recovery of blood glucose, which remain stable for >120 days. Additionally, antifibrotic drug-loaded multilayer sheets facilitate blood glucose regulation by rat islets at the subcutaneous sites of diabetic immunocompetent mice for >35 days. Thus, this macroencapsulation system can advance the treatment of Type I diabetes and is also effective for islet xenotransplantation in subcutaneous tissue.

Precision Repair of Zone-Specific Meniscal Injuries Using a Tunable Extracellular Matrix-Based Hydrogel System.

Meniscus injuries present significant therapeutic challenges due to their limited self-healing capacity and diverse biological and mechanical properties across meniscal tissue. Conventional repair strategies neglect to replicate the complex zonal characteristics within the meniscus, resulting in suboptimal outcomes. In this study, we introduce an innovative, age- and stiffness-tunable meniscus decellularized extracellular matrix (DEM)-based hydrogel system designed for precision repair of heterogeneous, zonal-dependent meniscus injuries. By synthesizing age-dependent DEM hydrogels, we identified distinct cellular responses: fetal bovine meniscus-derived DEM promoted chondrogenic differentiation, while adult meniscus-derived DEM supported fibrochondrogenic phenotypes. The incorporation of methacrylate hyaluronic acid (MeHA) further refined the mechanical properties and injectability of the DEM-based hydrogels. The combination of age-dependent DEM with MeHA allowed for precise stiffness tuning, influencing cell differentiation and closely mimicking native tissue environments. In vivo tests confirmed the biocompatibility of hydrogels and their integration with native meniscus tissues. Furthermore, advanced 3D bioprinting techniques enabled the fabrication of hybrid hydrogels with biomaterial and mechanical gradients, effectively emulating the zonal properties of meniscus tissue and enhancing cell integration. This study represents a significant advancement in meniscus tissue engineering, providing a promising platform for customized regenerative therapies across a range of heterogeneous fibrous connective tissues.

Geometric feature extraction in nanofiber membrane image based on convolution neural network for surface roughness prediction.

As a technique in artificial intelligence, a convolution neural network model has been utilized to extract average surface roughness from the geometric characteristics of a membrane image featuring micro- and nanostructures. For surface roughness measurement, e.g. atomic force microscopy and optical profiler, the previous methods have been performed to analyze a porous membrane surface on an interest of region with a few micrometers of the restricted area according to the depth resolution. However, an image from the scanning electron microscope, combined with the feature extraction process, provides clarity on surface roughness for multiple areas with various depth resolutions. Through image preprocessing, the geometric pattern is elucidated by amplifying the disparity in pixel intensity values between the bright and dark regions of the image. The geometric pattern of the binary image and magnitude spectrum confirmed the classification of the surface roughness of images in a categorical scatter plot. A group of cropped images from an original image is used to predict the logarithmic average surface roughness values. The model predicted 4.80 % MAPE for the test dataset. The method of extracting geometric patterns through a feature map-based CNN, combined with a statistical approach, suggests an indirect surface measurement. The process is achieved through a bundle of predicted output data, which helps reduce the randomness error of the structural characteristics. A novel feature extraction approach of CNN with statistical analysis is a valuable method for revealing hidden physical characteristics in surface geometries from irregular pixel patterns in an array of images.

Investigations of Laser-Assisted Renal Denervation for Treatment of Resistant Hypertension.

BACKGROUND AND OBJECTIVES: Renal denervation (RDN) is an emerging surgical treatment for resistant hypertension. However, the current RDN using radiofrequency can cause undesirable thermal damage to the medial and luminal layers due to direct contact between the arterial lumen and energy source. The aim of this study is to evaluate the feasibility of the new laser-assisted RDN by exploring the potential treatment conditions. METHODS: For ex vivo testing, six different treatment conditions (10 and 20 W applied for delivery of 300, 450, and 600 J) were tested on the porcine liver and renal artery (RA) by using a continuous wave 1064 nm laser wavelength. The ablated area in the liver tissue was measured to estimate the extent of the coagulated area. Histological evaluation was performed on the treated RA tissues to confirm the extent of thermal nerve damage. RESULTS: The ablated depth, length, and area in the liver tissue increased with laser power and total energy. According to the histological results, 20 W groups yielded more significant damage to the RA nerves than 10 W groups at the total energy of 300 J (0.0 ± 0.0 mm for 10 W vs. 2.9 ± 1.0 mm for 20 W), 450 J (1.9 ± 0.6 mm for 10 W vs. 6.8 ± 1.5 mm for 20 W), and 600 J (2.9 ± 0.4 mm for 10 W vs. 7.3 ± 0.8 mm for 20 W). The treated RA exhibited insignificant medial injury in depth (medial thinning ≤ 25%), and no difference in the medial thinning was found among the six groups (p = 0.4). CONCLUSION: The current study demonstrated that the 1064 nm laser at 20 W with delivery of 450 J could effectively damage the RA nerves with no or minimal injury to the surrounding tissue. The proposed laser-assisted RDN may enhance physiological effects with insignificant complications in in vivo situations. Further in vivo studies will be conducted to validate the current findings by evaluating the extent of blood pressure reduction and norepinephrine changes after the laser-assisted RDN on a large animal model.

Wavelength-dependent photobiomodulation (PBM) for proliferation and angiogenesis of melanoma tumor in vitro and in vivo.

Photobiomodulation (PBM) has widely been used to effectively treat complications associated with cancer treatment, including oral mucositis, radiation dermatitis, and surgical wounds. However, the safety of PBM against cancer still needs to be validated as the effects of PBM on cancer cells and their mechanisms are unclear. The current study investigated the wavelength-dependent PBM effects by examining four different laser wavelengths (405, 532, 635, and 808 nm) on B16F10 melanoma tumor cells. In vitro tests showed that PBM with 808 nm promoted both proliferation and migration of B16F10 cells. In vivo results demonstrated that PBM with 808 nm significantly increased the relative tumor volume and promoted angiogenesis with overexpression of VEGF and HIF-1α. In addition, PBM induced the phosphorylation of factors closely related to cancer cell proliferation and tumor growth and upregulated the related gene expression. The current result showed that compared to the other wavelengths, 808 nm yielded a significant tumor-stimulating effect the malignant melanoma cancer. Further studies will investigate the in-depth molecular mechanism of PBM on tumor stimulation in order to warrant the safety of PBM for clinical cancer treatment.

Risk factors of revision operation and early revision for adjacent segment degeneration after lumbar fusion surgery: a case-control study.

BACKGROUND CONTEXT: Adjacent segment degeneration (ASD) following lumbar fusion operation is common and can occur at varying timepoints after index surgery. An early revision operation for ASD, however, signifies a short symptom-free period and might increase the risk of successive surgeries. PURPOSE: We aimed to elucidate the overall risk factors associated with revision surgeries for ASD with distinct attention to early revisions. STUDY DESIGN/SETTING: Retrospective, case-control study. PATIENT SAMPLE: The study included 86 patients who underwent revision operations for ASD after lumbar fusion in the revision group and 166 patients who did not for at least 5 years after index surgery. OUTCOME MEASURES: Sagittal parameters, Pfirrmann grading, facet degeneration grading, and disc space height (DSH) of adjacent segments were assessed. METHODS: Revision operations within 5 years postsurgery were defined as early revision. We compared the revision and no-revision groups as well as the early- and late-revision groups. RESULTS: The revision group demonstrated a significantly greater preoperative C7-S1 sagittal vertical axis (SVA) (p=.001), postoperative C7-S1 SVA (p<.001), and postoperative pelvic incidence (PI)-lumbar lordosis (LL) (p<.001) than those in the no-revision group. Preoperative DSH of the proximal adjunct segment (p=.001), postoperative PI-LL (p=.014), and postoperative C7-S1 SVA (p=.037) exhibited significant association with ASD in logistic regression analysis. The early-revision group had a significantly higher patient age (p=.001) and a greater number of levels fused (p=.030) than those in the late-revision group. Multivariate Cox regression analysis demonstrated that old age (p=.045), a significant number of levels fused (p=.047), and a narrow preoperative DSH of the proximal adjacent level (p=.011) were risk factors for early revision. CONCLUSIONS: Postoperative sagittal imbalance, including significant PI-LL and C7-S1 SVA were risk factors for revision operation for ASD but not for early revision. These factors are likely to affect the long-term risk of revision operation due to ASD and thus are not considered risk factors for early revision. Narrow DSH of the proximal adjacent level increased the risks of both revision and early revision surgeries. Moreover, old age and a significant number of levels fused further increased the risk for early revision for ASD.

Photo-triggered caffeic acid delivery via psyllium polysaccharide- gellan gum-based injectable bionanogel for epidermoid carcinoma treatment.

Here, the simultaneous effect of chemo- and photothermal therapy against epidermoid carcinoma (EC) was investigated. A novel hydrogel, termed bionanogel (BNG), was designed using psyllium mucilage polysaccharide and bacterial gellan gum, incorporated with nanocomplex carrying caffeic acid (CA) and IR-820, and further characterized. The dual effect of BNG and 808 nm laser (BNG + L) on EC was investigated. Staining and scratch assays were performed to analyze their therapeutic effect on EC. In vivo evaluations of BNG + L in xenograft models were performed. Rapid transition, limited swelling, degradability and high tensile strength indicated BNG stability and sustained drug release. Irradiation with 808 nm laser light at 1.25 W /cm2 for 4 min resulted in a temperature increase of 53 °C and facilitated cell ablation. The in vitro studies showed that BNG + L suppressed cancer progression via a late apoptotic effect. The in vivo study showed that the slow release of CA from BNG + L significantly attenuated EC with low mitotic index and downregulation of proteins involved in cancer proliferation such as EGFR, AKT, PI3K, ERK, mTOR and HIF-1α. Thus, BNG could be a novel medium for targeted and controlled drug delivery for the treatment of epidermoid cancer when triggered by NIR light.

Determinants of the happiness of adolescents: A leisure perspective.

Leisure plays a key role in the happiness of youth. Studies have shown that various factors of leisure, such as the type, the time, the cost, and the space, have an influence on the adolescents' happiness. However, little is known about which of these factors is a major factor in youth's happiness. The purpose of this study is to explore the leisure factors that determine happiness in adolescents by examining the relationship between happiness and various leisure factors. The study used the method of machine learning to analyze national statistical data, National Leisure Activity Survey. The data used in this study were from the National Leisure Activity Survey 2019, which is a national statistic produced by the Ministry of Culture, Sports and Tourism in the Republic of Korea. The analysis found that leisure perceptions, academic and leisure balance, and public leisure space have a very important impact on the adolescents' well-being. The findings of this research may contribute to a better understanding of leisure and happiness in adolescents, and will also help adolescents make better use of their leisure time, leading to better leisure lives, and ultimately contribute to raising their level of happiness.

A long-term storable gel-laden chip composite built in a multi-well plate enablingin situcell encapsulation for high-throughput liver model.

Hydrogels are widely used as scaffold materials for constructingin vitrothree-dimensional microphysiological systems. However, their high sensitivity to various external cues hinders the development of hydrogel-laden, microscale, and high-throughput chips. Here, we have developed a long-term storable gel-laden chip composite built in a multi-well plate, which enablesin situcell encapsulation and facilitates high-throughput analysis. Through optimized chemical crosslinking and freeze-drying method (C/FD), we have achieved a high-quality of gel-laden chip composite with excellent transparency, uniform porosity, and appropriate swelling and mechanical characteristics. Besides collagen, decellularized extracellular matrix with tissue-specific biochemical compound has been applied as chip composite. As a ready-to-use platform,in situcell encapsulation within the gel has been achieved through capillary force generated during gel reswelling. The liver-mimetic chip composite, comprising HepG2 cells or primary hepatocytes, has demonstrated favorable hepatic functionality and high sensitivity in drug testing. The developed fabrication process with improved stability of gels and storability allows chip composites to be stored at a wide range of temperatures for up to 28 d without any deformation, demonstrating off-the-shelf products. Consequently, this provides an exceptionally simple and long-term storable platform that can be utilized for an efficient tissue-specific modeling and various biomedical applications.

Local dose-dense chemotherapy for triple-negative breast cancer via minimally invasive implantation of 3D printed devices.

Dose-dense chemotherapy is the preferred first-line therapy for triple-negative breast cancer (TNBC), a highly aggressive disease with a poor prognosis. This treatment uses the same drug doses as conventional chemotherapy but with shorter dosing intervals, allowing for promising clinical outcomes with intensive treatment. However, the frequent systemic administration used for this treatment results in systemic toxicity and low patient compliance, limiting therapeutic efficacy and clinical benefit. Here, we report local dose-dense chemotherapy to treat TNBC by implanting 3D printed devices with time-programmed pulsatile release profiles. The implantable device can control the time between drug releases based on its internal microstructure design, which can be used to control dose density. The device is made of biodegradable materials for clinical convenience and designed for minimally invasive implantation via a trocar. Dose density variation of local chemotherapy using programmable release enhances anti-cancer effects in vitro and in vivo. Under the same dose density conditions, device-based chemotherapy shows a higher anti-cancer effect and less toxic response than intratumoral injection. We demonstrate local chemotherapy utilizing the implantable device that simulates the drug dose, number of releases, and treatment duration of the dose-dense AC (doxorubicin and cyclophosphamide) regimen preferred for TNBC treatment. Dose density modulation inhibits tumor growth, metastasis, and the expression of drug resistance-related proteins, including p-glycoprotein and breast cancer resistance protein. To the best of our knowledge, local dose-dense chemotherapy has not been reported, and our strategy can be expected to be utilized as a novel alternative to conventional therapies and improve anti-cancer efficiency.

A literature review of bioactive substances for the treatment of periodontitis: In vitro, in vivo and clinical studies.

Periodontitis is a common chronic inflammatory disease of the supporting tissues of the tooth that involves a complex interaction of microorganisms and various cell lines around the infected site. To prevent and treat this disease, several options are available, such as scaling, root planning, antibiotic treatment, and dental surgeries, depending on the stage of the disease. However, these treatments can have various side effects, including additional inflammatory responses, chronic wounds, and the need for secondary surgery. Consequently, numerous studies have focused on developing new therapeutic agents for more effective periodontitis treatment. This review explores the latest trends in bioactive substances with therapeutic effects for periodontitis using various search engines. Therefore, this study aimed to suggest effective directions for therapeutic approaches. Additionally, we provide a summary of the current applications and underlying mechanisms of bioactive substances, which can serve as a reference for the development of periodontitis treatments.

Comparative efficacies and safeties of cylindrical interstitial laser ablation and radiofrequency ablation on swine pancreas.

Laser ablation (LA) has been evaluated for the minimally invasive thermal treatment of various cancers, but conventional unidirectional endoscopic ultrasound (EUS)-guided LA has limitations. Therefore, we developed a cylindrical laser diffuser to overcome the limitations of unidirectional EUS-guided LA. The purpose of this study was to compare the efficacies and safeties of EUS-guided LA using a novel cylindrical laser diffuser and radiofrequency ablation (RFA) in vivo in swine pancreas. EUS-guided RFA (15 W, 30 s, 450 J) and cylindrical interstitial LA (CILA) (5 W, 90 s, 450 J) were applied to normal pancreatic tissue in six anesthetized pigs (three per group). Laboratory tests were performed at baseline, immediately after ablation (day 0), and 2 days after procedures (day 2). Two days after procedures, all pigs were sacrificed, and histopathological safety and efficacy assessments were performed. Technically, EUS-guided RFA and CILA were performed successfully in all cases. No major complications, including perforation or acute pancreatitis, occurred during the experiment in either group. All animals remained in excellent condition throughout the experimental period, and laboratory tests provided no evidence of a major complication. Average necrotic volumes in the RFA and CILA groups were 424.2 mm3 and 3747.4 mm3, respectively, and average necrotic volume was significantly larger in CILA group (p < 0.001). EUS-guided RFA and CILA had acceptable safety profiles in the normal swine pancreas model. Our findings indicate EUS-guided CILA has potential for the effective local treatment of pancreatic cancer as an alternative to EUS-guided RFA.

3D Bioprinted Liver-on-a-Chip for Drug Cytotoxicity Screening.

Tissues on a chip are sophisticated three-dimensional (3D) in vitro microphysiological systems designed to replicate human tissue conditions within dynamic physicochemical environments. However, the current fabrication methods for tissue spheroids on a chip require multiple parts and manual processing steps, including the deposition of spheroids onto prefabricated "chips." These challenges also lead to limitations regarding scalability and reproducibility. To overcome these challenges, we employed 3D printing techniques to automate the fabrication process of tissue spheroids on a chip. This allowed the simultaneous high-throughput printing of human liver spheroids and their surrounding polymeric flow chamber "chips" containing inner channels in a single step. The fabricated liver tissue spheroids on a liver-on-a-chip (LOC) were subsequently subjected to dynamic culturing by a peristaltic pump, enabling assessment of cell viability and metabolic activities. The 3D printed liver spheroids within the printed chips demonstrated high cell viability (>80%), increased spheroid size, and consistent adenosine triphosphate (ATP) activity and albumin production for up to 14 days. Furthermore, we conducted a study on the effects of acetaminophen (APAP), a nonsteroidal anti-inflammatory drug, on the LOC. Comparative analysis revealed a substantial decline in cell viability (<40%), diminished ATP activity, and reduced spheroid size after 7 days of culture within the APAP-treated LOC group, compared to the nontreated groups. These results underscore the potential of 3D bioprinted tissue chips as an advanced in vitro model that holds promise for accurately studying in vivo biological processes, including the assessment of tissue response to administered drugs, in a high-throughput manner.

Biofunctionalized Electrospun Vascular Scaffolds for Enhanced Antithrombotic Properties and In Situ Endothelialization.

The development of innovative vascular substitutes has become increasingly significant due to the prevalence of vascular diseases. In this study, we designed a biofunctionalized electrospun vascular scaffold by chemically conjugating heparin molecules as an antithrombotic agent with an endothelial cell (EC)-specific antibody to promote in situ endothelialization. To optimize this biofunctionalized electrospun vascular scaffolding system, we examined various parameters, including material compositions, cross-linker concentrations, and cross-linking and conjugation processes. The findings revealed that a higher degree of heparin conjugation onto the vascular scaffold resulted in improved antithrombotic properties, as confirmed by the platelet adhesion test. Additionally, the flow chamber study demonstrated that the EC-specific antibody immobilization enhanced the scaffold's EC-capturing capability compared to a nonconjugated vascular scaffold. The optimized biofunctionalized vascular scaffolds also displayed exceptional mechanical properties, such as suture retention strength and tensile properties. Our research demonstrated that the biofunctionalized vascular scaffolds and the directed immobilization of bioactive molecules could provide the necessary elements for successful acellular vascular tissue engineering applications.

3D bioprinting of dECM-incorporated hepatocyte spheroid for simultaneous promotion of cell-cell and -ECM interactions.

The cell spheroid technology, which greatly enhances cell-cell interactions, has gained significant attention in the development of in vitro liver models. However, existing cell spheroid technologies still have limitations in improving hepatocyte-extracellular matrix (ECM) interaction, which have a significant impact on hepatic function. In this study, we have developed a novel bioprinting technology for decellularized ECM (dECM)-incorporated hepatocyte spheroids that could enhance both cell-cell and -ECM interactions simultaneously. To provide a biomimetic environment, a porcine liver dECM-based cell bio-ink was developed, and a spheroid printing process using this bio-ink was established. As a result, we precisely printed the dECM-incorporated hepatocyte spheroids with a diameter of approximately 160-220 µm using primary mouse hepatocyte (PMHs). The dECM materials were uniformly distributed within the bio-printed spheroids, and even after more than 2 weeks of culture, the spheroids maintained their spherical shape and high viability. The incorporation of dECM also significantly improved the hepatic function of hepatocyte spheroids. Compared to hepatocyte-only spheroids, dECM-incorporated hepatocyte spheroids showed approximately 4.3- and 2.5-fold increased levels of albumin and urea secretion, respectively, and a 2.0-fold increase in CYP enzyme activity. These characteristics were also reflected in the hepatic gene expression levels of ALB, HNF4A, CPS1, and others. Furthermore, the dECM-incorporated hepatocyte spheroids exhibited up to a 1.8-fold enhanced drug responsiveness to representative hepatotoxic drugs such as acetaminophen, celecoxib, and amiodarone. Based on these results, it can be concluded that the dECM-incorporated spheroid printing technology has great potential for the development of highly functional in vitro liver tissue models for drug toxicity assessment.

Balloon-assisted laser application for endoscopic treatment of biliary stricture.

OBJECTIVES: Malignant biliary stricture is a ductal narrowing of the bile duct that is often diagnosed at an advanced stage, leading to difficulty in resection. The current study aims to evaluate the feasibility of endobiliary laser treatment by quantifying the extent of coagulative necrosis in tissue under various conditions. METHODS: Ex vivo and in vivo porcine bile tissues were used for endobiliary laser treatment to characterize the dosimetric responses of the tissue to various treatment conditions: power level, irradiation time, and number of treatments. 532 nm laser light was coupled with a balloon-integrated diffusing applicator (BDA) to deliver the laser light endoscopically for tissue coagulation. The coagulated regions (maximum length and depth) in the treated tissues were evaluated histologically for quantitative comparison. RESULTS: Dosimetric evaluations with ex vivo liver tissue confirmed that both maximum length and depth of coagulative necrosis (CN) increased with applied power and number of treatments. Ex vivo bile duct tests demonstrated that BDA-assisted laser treatment at 10 W for 12 s reproducibly yielded CN with a length of 5.8 ± 1.6 mm and a depth of 0.6 ± 0.2 mm. In vivo tests presented that endoscopic laser treatment using the BDA created CN on the ductal surface without any perforation. Microscopic examinations revealed that a dense inflammatory cell infiltration and eosinophilic area in the in vivo treated tissue. The extent of CN in the in vivo tissue was 40% longer and 120% deeper (length: 8.1 ± 0.7 mm; depth: 1.3 ± 0.2 mm), compared to that in the ex vivo tissue. CONCLUSION: BDA-assisted laser treatment could be a feasible option for endoscopic treatment of biliary stricture with uniform ablation at the circumference of bile duct. Further in vivo studies will be performed in a large number of stricture-developed porcine models to examine both efficacy and safety of the proposed endobiliary laser treatment for clinical translations.

Liver dECM-Gelatin Composite Bioink for Precise 3D Printing of Highly Functional Liver Tissues.

In recent studies, liver decellularized extracellular matrix (dECM)-based bioinks have gained significant attention for their excellent compatibility with hepatocytes. However, their low printability limits the fabrication of highly functional liver tissue. In this study, a new liver dECM-gelatin composite bioink (dECM gBioink) was developed to overcome this limitation. The dECM gBioink was prepared by incorporating a viscous gelatin mixture into the liver dECM material. The novel dECM gBioink showed 2.44 and 10.71 times higher bioprinting resolution and compressive modulus, respectively, than a traditional dECM bioink. In addition, the new bioink enabled stable stacking with 20 or more layers, whereas a structure printed with the traditional dECM bioink collapsed. Moreover, the proposed dECM gBioink exhibited excellent hepatocyte and endothelial cell compatibility. At last, the liver lobule mimetic structure was successfully fabricated with a precisely patterned endothelial cell cord-like pattern and primary hepatocytes using the dECM gBioink. The fabricated lobule structure exhibited excellent hepatic functionalities and dose-dependent responses to hepatotoxic drugs. These results demonstrated that the gelatin mixture can significantly improve the printability and mechanical properties of the liver dECM materials while maintaining good cytocompatibility. This novel liver dECM gBioink with enhanced 3D printability and resolution can be used as an advanced tool for engineering highly functional liver tissues.

Effect of dual-optical pulses with temporal energy distribution on laser ablation performance in in vivo zebrafish model.

A Q-switched laser system has been used in a single-pulse mode for skin melasma treatments because of instant heat deposition in the target. Despite the efficient ablation of the melanophores in the skin, the single, high-fluence pulse often causes undesirable damage to the surrounding tissue, leading to high recurrence rates. This study aims to investigate the feasibility of dual-optical pulses with a temporal energy distribution on the melasma treatment in in vivo zebrafish models in comparison to that of the single optical pulse. Based on the optical detection, the dual-optical pulses had a temporal energy distribution ratio of 4:1 and an interval of 61 µs between the two consecutive pulses. According to the histological analysis, the dual pulses removed melanophores and induced a few apoptotic nuclei with minimal recurrence. This study demonstrated that the feasibility of dual-optical pulses (energy ratio = 4:1) could enhance the laser ablation performance in vivo.

Comparative Evaluations on Real-Time Monitoring of Temperature Sensors during Endoscopic Laser Application.

Temperature sensors, such as Fiber Bragg Grating (FBG) and thermocouple (TC), have been widely used for monitoring the interstitial tissue temperature during laser irradiation. The aim of the current study was to compare the performance of both FBG and TC in real-time temperature monitoring during endoscopic and circumferential laser treatment on tubular tissue structure. A 600-µm core-diameter diffusing applicator was employed to deliver 980-nm laser light (30 W for 90 s) circumferentially for quantitative evaluation. The tip of the TC was covered with a white tube (W-TC) in order to prevent direct light absorption and to minimize temperature overestimation. The temperature measurements in air demonstrated that the measurement difference in the temperature elevations was around 3.5 °C between FBG and W-TC. Ex vivo porcine liver tests confirmed that the measurement difference became lower (less than 1 °C). Ex vivo porcine esophageal tissue using a balloon-integrated catheter exhibited that both FBG and W-TC consistently showed a comparable trend of temperature measurements during laser irradiation (~2 °C). The current study demonstrated that the white tube-covered TC could be a feasible sensor to monitor interstitial tissue temperature with minimal overestimation during endoscopic laser irradiation. Further in vivo studies on gastroesophageal reflux disease will investigate the performance of the W-TC to monitor the temperature of the esophageal mucosa surface in real-time mode to warrant the safety of endoscopic laser treatment.