A parametric study regarding structural design of a bioprosthetic aortic valve by 3D fluid-structure interaction simulations.

Since the introduction of transcatheter aortic valve (AV) implantation as a viable option, surgical bioprosthetic AVs have recently started incorporating shorter struts considering future valve-in-valve procedures. However, the effect of leaflet coaptation geometry on the longevity of these valves remains unexplored. To address this gap, we performed a finite element analysis on bioprosthetic AVs with varying strut heights using a two-way fluid-structure interaction method. To establish a baseline, we used a standard height based on a rendered platform image of the CE PERIMOUNT Magna Ease valve from Edward Lifesciences in Irvine, CA. Bovine pericardium properties were assigned to the leaflets, while normal saline properties were used as the recirculating fluid in hemodynamic simulations. The physiological pressure profile of the cardiac cycle was applied between the aorta and left ventricle. We calculated blood flow velocity, effective orifice area (EOA), and mechanical stress on the leaflets. The results reveal that as the strut height increases, the stroke volume increases, leakage volume decreases, and EOA improves. Additionally, the maximum mechanical stress experienced by the leaflet decreases by 62% as the strut height increases to 1.2 times the standard height. This research highlights that a low-strut design in bioprosthetic AVs may negatively affect their durability, which can be useful in design of next-generation bioprosthetic AVs.

Mixing behavior of Ti-Al interface during the ultrasonic welding process and its welding strength: Molecular dynamics study.

In this study, we conducted molecular dynamics simulations to investigate the mechanical mixing and deformation behavior of hcp Ti/fcc Al bimetal formed by ultrasonic welding (UW). To analyze the effect of the interface shape, we considered sixteen sinusoidal interfaces of various heights and spatial periods along with the flat interface. Mechanical mixing between Ti and Al occurs mainly in the vibrational loading direction, while it is suppressed in the interface-normal direction, as the loading direction lies within the slip planes of both the hcp and fcc structures. The degree of mechanical mixing depended on the shape of the interface. According to the simulation results, mechanical mixing becomes active as the sinusoidal height increases, and the spatial period decreases because of the enlarged interface areas. During the bonding process, phase transformation is observed at the sinusoidal interface; hcp Ti is converted to fcc Ti as misfit dislocations formed at the interface glide as Shockley partials on the slip plane owing to the applied vibrational loading. A simple shear test was performed to analyze the welding strength. Although sinusoidal Ti/Al interfaces can have a welding strength that is higher than that of a flat interface, we found that the welding strength was not closely related to the degree of mechanical mixing. Rather, the welding strength was affected by the interaction between a wall of misfit dislocations, stacking fault tetrahedra, and lattice dislocations generated near the interface during the UW process.

Electronic Structure Engineered Heteroatom Doped All Transition Metal Sulfide Carbon Confined Heterostructure for Extrinsic Pseudocapacitor.

Ultra-high energy density battery-type materials are promising candidates for supercapacitors (SCs); however, slow ion kinetics and significant volume expansion remain major barriers to their practical applications. To address these issues, hierarchical lattice distorted α-/γ-MnS@Cox Sy core-shell heterostructure constrained in the sulphur (S), nitrogen (N) co-doped carbon (C) metal-organic frameworks (MOFs) derived nanosheets (α-/γ-MnS@Cox Sy @N, SC) have been developed. The coordination bonding among Cox Sy , and α-/γ-MnS nanoparticles at the interfaces and the π-π stacking interactions developed across α-/γ-MnS@Cox Sy and N, SC restrict volume expansion during cycling. Furthermore, the porous lattice distorted heteroatom-enriched nanosheets contain a sufficient number of active sites to allow for efficient electron transportation. Density functional theory (DFT) confirms the significant change in electronic states caused by heteroatom doping and the formation of core-shell structures, which provide more accessible species with excellent interlayer and interparticle conductivity, resulting in increased electrical conductivity. . The α-/γ-MnS@Cox Sy @N, SC electrode exhibits an excellent specific capacity of 277 mA hg-1 and cycling stability over 23 600 cycles. A quasi-solid-state flexible extrinsic pseudocapacitor (QFEPs) assembled using layer-by-layer deposited multi-walled carbon nanotube/Ti3 C2 TX nanocomposite negative electrode. QFEPs deliver specific energy of 64.8 Wh kg-1 (1.62 mWh cm-3 ) at a power of 933 W kg-1 and 92% capacitance retention over 5000 cycles.

Reconfiguring the Electronic Structure of Heteroatom Doped Carbon Supported Bimetallic Oxide@Metal Sulfide Core-Shell Heterostructure via In Situ Nb Incorporation toward Extrinsic Pseudocapacitor.

High-energy-density battery-type materials have sparked considerable interest as supercapacitors electrode; however, their sluggish charge kinetics limits utilization of redox-active sites, resulting in poor electrochemical performance. Here, the unique core-shell architecture of metal organic framework derived N-S codoped carbon@Cox Sy micropetals decorated with Nb-incorporated cobalt molybdate nanosheets (Nb-CMO4 @Cx Sy NC) is demonstrated. Coordination bonding across interfaces and π-π stacking interactions between CMO4 @Cx Sy and N and, S-C can prevent volume expansion during cycling. Density functional theory analysis reveals that the excellent interlayer and the interparticle conductivity imparted by Nb doping in heteroatoms synergistically alter the electronic states and offer more accessible species, leading to increased electrical conductivity with lower band gaps. Consequently, the optimized electrode has a high specific capacity of 276.3 mAh g-1 at 1 A g-1 and retains 98.7% of its capacity after 10 000 charge-discharge cycles. A flexible quasi-solid-state SC with a layer-by-layer deposited reduced graphene oxide /Ti3 C2 TX anode achieves a specific energy of 75.5 Wh kg-1 (volumetric energy of 1.58 mWh cm-3 ) at a specific power of 1.875 kWh kg-1 with 96.2% capacity retention over 10 000 charge-discharge cycles.

Highly Dispersed Pt Clusters on F-Doped Tin(IV) Oxide Aerogel Matrix: An Ultra-Robust Hybrid Catalyst for Enhanced Hydrogen Evolution.

Dispersing the minuscule mass loading without hampering the high catalytic activity and long-term stability of a noble metal catalyst results in its ultimate efficacy for the electrochemical hydrogen evolution reaction (HER). Despite being the most efficient HER catalyst, the use of Pt is curtailed due to its scarcity and tendency to leach out in the harsh electrochemical reaction environment. In this study, we combined F-doped tin(IV) oxide (F-SnO2) aerogel with Pt catalyst to prevent metallic corrosion and to achieve abundant Pt active sites (approximately 5 nm clusters) with large specific surface area (321 cm2·g-1). With nanoscopic Pt loading inside the SnO2 aerogel matrix, the as-synthesized hybrid F-SnO2@Pt possesses a large specific surface area and high porosity and, thus, exhibits efficient experimental and intrinsic HER activity (a low overpotential of 42 mV at 10 mA·cm-2 in 0.5 M sulfuric acid), a 22-times larger turnover frequency (11.2 H2·s-1) than that of Pt/C at 50 mV, and excellent robustness over 10,000 cyclic voltammetry cycles. The existing metal support interaction and strong intermolecular forces between Pt and F-SnO2 account for the catalytic superiority and persistence against corrosion of F-SnO2@Pt compared to commercially used Pt/C. Density functional theory analysis suggests that hybridization between the Pt and F-SnO2 orbitals enhances intermediate hydrogen atom (H*) adsorption at their interface, which improves the reaction kinetics.

The lattice dislocation trapping mechanism at the ferrite/cementite interface in the Isaichev orientation relationship.

We analyze the lattice dislocation trapping mechanism at the ferrite/cementite interface of the Isaichev orientation relationship by atomistic simulations combined with the anisotropic linear elasticity theory and disregistry analysis. We find that the lattice dislocation trapping ability is varied by initial position of the lattice dislocation. The lattice dislocation near the interface is attracted to the interface by the image force generated by the interface shear, while the lattice dislocation located far is either attracted to or repelled from the interface, or even oscillates around the introduced position, depending on the combination of the stress field induced by the misfit dislocation array and the image stress field induced by the lattice dislocation.

Density functional theory study of the mechanical behavior of silicene and development of a Tersoff interatomic potential model tailored for elastic behavior.

Silicene, a graphene-like 2D material made from Si atoms, has been fabricated and studied for its promising applications in micro/nanoelectronics. For the reliable function of silicene devices, it is important to investigate silicene's mechanical properties. In this study, the authors conducted density functional theory (DFT) simulations of mechanical tests of silicene and investigated the elastic modulus and mechanical response such as structural transformation. In addition, the authors optimized the Tersoff potential parameters using a gradient-based minimization with a grid search method in hyperdimensional parameter space, to match the DFT calculation results in the elastic regime. With the new parameter set, the elastic moduli of silicene in the zigzag (ZZ) and armchair (AC) directions were computed with molecular statics (MS) simulations and compared with those of other Si interatomic potential models and DFT results. In addition, uniaxial tensile tests along the ZZ and AC directions were performed to examine how far the Tersoff model is transferable with our new parameter set to describe the nonlinear mechanical behavior of silicene. The results of uniaxial tensile tests suggest that the angle penalty function in the Tersoff model needs to be modified and that the stress-strain curve predicted with this modification shows improvement compared to the original function.

Gravitational Effect on the Advancing and Receding Angles of a Two-Dimensional Cassie-Baxter Droplet on a Textured Surface.

Advancing and receding angles are physical quantities frequently measured to characterize the wetting properties of a rough surface. Thermodynamically, the advancing and receding angles are often interpreted as the maximum and minimum contact angles that can be formed by a droplet without losing its stability. Despite intensive research on wetting of rough surfaces, the gravitational effect on these angles has been overlooked because most studies have considered droplets smaller than the capillary length. In this study, however, by combining theoretical and numerical modeling, we show that the shape of a droplet smaller than the capillary length can be substantially modified by gravity under advancing and receding conditions. First, based on the Laplace pressure equation, we predict the shape of a two-dimensional Cassie-Baxter droplet on a textured surface with gravity at each pinning point. Then, the stability of the droplet is tested by examining the interference between the liquid surface and neighboring pillars and analyzing the free energy change upon depinning. Interestingly, it turns out that the apparent contact angles under advancing and receding conditions are not affected by gravity, while the overall shape of a droplet and the position of the pinning point are affected by gravity. In addition, the advancing and receding of the droplet with continuously increasing or decreasing volume are analyzed, and it is shown that the gravitational effect plays a key role in the movement of the droplet tip. Also, the gravitational effect on the degree of the stability of the droplet upon the external effect such as vibration is discussed. Finally, the theoretical predictions were validated against line tension-based front tracking modeling (LTM) that seamlessly captures the attachment and detachment between the liquid surface and the solid substrate. Our findings provide a deeper understanding on the advancing and receding phenomena of a droplet and essential insight into designing devices that utilize the wettability of rough surfaces.

Trastuzumab Specific Epitope Evaluation as a Predictive and Prognostic Biomarker in Gastric Cancer Patients.

While human epidermal growth factor receptor 2 (HER2) immunohistochemistry (IHC) antibodies bind to the intracellular domain, trastuzumab binds to the extracellular epitope of HER2 receptor: target of drug action. We aimed to evaluate clinical significance of the new IHC method assessing the target of trastuzumab in gastric cancer (GC) patients and compare with conventional methods. Sixty-nine trastuzumab-treated GC patients were enrolled from two different cohorts. Additionally, we enrolled 528 consecutive GC patients to evaluate prognostic implications of HER2 test methods. HER2 status was assessed by trastuzumab IHC, HER2 IHC (4B5), and HER2 silver in situ hybridization (SISH). HER2 IHC showed 3+ in 48/69 trastuzumab-treated patients (69.6%), however, trastuzumab IHC showed 3+ in 25 (36.2%). Patients with trastuzumab IHC ≥2+ had significantly better progression-free survival (PFS) and overall survival (OS) than their counterpart (p = 0.014). In univariate analysis, trastuzumab IHC ≥2+ and HER2 IHC 3+ were only significant predictive factors for OS in trastuzumab-treated patients. Of the 528 consecutive GCs, patients with trastuzumab IHC ≥2+ had shorter disease-free survival (DFS) and OS (p = 0.008 and 0.031, respectively), while conventional methods failed to reveal any significant survival differences. HER2 assessment by trastuzumab IHC was different from conventional HER2 test results. Trastuzumab IHC was suggested to be a significant predictive factor for trastuzumab responsiveness and prognostic factor for consecutive GCs.

Diagnostic Reference Levels for Adult Nuclear Medicine Imaging Established from the National Survey in Korea.

PURPOSE: There is substantial need for optimizing radiation protection in nuclear medicine imaging studies. However, the diagnostic reference levels (DRLs) have not yet been established for nuclear medicine imaging studies in Korea. MATERIALS AND METHODS: The data of administered activity in 32 nuclear medicine imaging studies were collected from the Korean Society of Nuclear Medicine (KSNM) dose survey database from 2013 and 2014. Through the expert discussions and statistical analyses, the 75th quartile value (Q3) was suggested as the preliminary DRL values. Preliminary DRLs were subjected to approval process by the KSNM Board of Directors and KSNM Council, followed by clinical applications and performance rating by domestic institutes. RESULTS: DRLs were determined through 32 nuclear medicine imaging studies. The Q3 value was considered as appropriate selection as it was generally consistent with the most commonly administered activity. In the present study, the final version of initial DRL values for nuclear medicine imaging in Korean adults is described including various protocols of the brain and myocardial perfusion imaging. CONCLUSION: The first DRLs for nuclear medicine imaging in Korean adults were confirmed. The DRLs will enable optimized radiation protection in the field of nuclear medicine imaging in Korea.

Sulfisoxazole inhibits the secretion of small extracellular vesicles by targeting the endothelin receptor A.

Inhibitors of the secretion of cancer exosomes, which promote cancer progression and metastasis, may not only accelerate exosome biology research but also offer therapeutic benefits for cancer patients. Here we identify sulfisoxazole (SFX) as an inhibitor of small extracellular vesicles (sEV) secretion from breast cancer cells through interference with endothelin receptor A (ETA). SFX, an FDA-approved oral antibiotic, showed significant anti-tumor and anti-metastatic effects in mouse models of breast cancer xenografts, the reduced expression of proteins involved in biogenesis and secretion of sEV, and triggered co-localization of multivesicular endosomes with lysosomes for degradation. We demonstrate the important role of ETA, as target of SFX, by gain- and loss-of-function studies of the ETA protein, through a direct binding assay, and pharmacological and genetic approaches. These findings may provide a foundation for sEV-targeted cancer therapies and the mechanistic studies on sEV biology.

High-energy proton irradiation damage on two-dimensional hexagonal boron nitride.

The dielectric layer, which is an essential building block in electronic device circuitry, is subject to intrinsic or induced defects that limit its performance. Nano-layers of hexagonal boron nitride (h-BN) represent a promising dielectric layer in nano-electronics owing to its excellent electronic and thermal properties. In order to further analyze this technology, two-dimensional (2D) h-BN dielectric layers were exposed to high-energy proton irradiation at various proton energies and doses to intentionally introduce defective sites. A pristine h-BN capacitor showed typical degradation stages with a hard breakdown field of 10.3 MV cm-1, while h-BN capacitors irradiated at proton energies of 5 and 10 MeV at a dose of 1 × 1013 cm-2 showed lower hard breakdown fields of 1.6 and 8.3 MV cm-1, respectively. Higher leakage currents were observed under higher proton doses at 5 × 1013 cm-2, resulting in lower breakdown fields. The degradation stages of proton-irradiated h-BN are similar to those of defective silicon dioxide. The degradation of the h-BN dielectric after proton irradiation is attributed to Frenkel defects created by the high-energy protons, as indicated by the molecular dynamics simulation. Understanding the defect-induced degradation mechanism of h-BN nano-layers can improve their reliability, paving the way to the implementation of 2D h-BN in advanced micro- and nano-electronics.

Carrier Transport Properties of MoS2 Asymmetric Gas Sensor Under Charge Transfer-Based Barrier Modulation.

Over the past few years, two-dimensional materials have gained immense attention for next-generation electric sensing devices because of their unique properties. Here, we report the carrier transport properties of MoS2 Schottky diodes under ambient as well as gas exposure conditions. MoS2 field-effect transistors (FETs) were fabricated using Pt and Al electrodes. The work function of Pt is higher than that of MoS2, while that of Al is lower than that of MoS2. The MoS2 device with Al contacts showed much higher current than that with Pt contacts because of its lower Schottky barrier height (SBH). The electrical characteristics and gas responses of the MoS2 Schottky diodes with Al and Pt contacts were measured electrically and were simulated by density functional theory calculations. The theoretically calculated SBH of the diode (under gas absorption) showed that NOx molecules had strong interaction with the diode and induced a negative charge transfer. However, an opposite trend was observed in the case of NH3 molecules. We also investigated the effect of metal contacts on the gas sensing performance of MoS2 FETs both experimentally and theoretically.

Carrier scattering in quasi-free standing graphene on hexagonal boron nitride.

Graphene, a two-dimensional material with a honeycomb lattice, has been promoted as a next generation material because of its ultrafast charge carriers and superior electrical properties. Hexagonal boron nitride (h-BN) is an insulator explored as an ideal substrate for graphene with lattice-matching. Using raido-frequency (RF) transmission measurement which provides specific characteristics of carrier scattering in a device, we profoundly investigated the electrical properties of quasi-free standing graphene on h-BN. RF devices with graphene supported and encapsulated with h-BN were fabricated to analyze the RF signal at low temperatures from 100 to 300 K. We demonstrated the carrier behavior in graphene with thermally excited carriers and acoustic photon scattering according to heat energy. Both h-BN supported and encapsulated graphene showed a significant enhancement in RF transmission, which is close to a gold interconnector. Our device with graphene on h-BN exhibited concealed nonlinear characteristics at a specific temperature of 180 K due to the internal effects of acoustic phonon scattering, while a usual device with graphene on SiO2/Si provided a linear variation. To anticipate the potential for electronic applications, the electrical circuit properties such as impedance, resistance, and inductance were extracted from the results of RF measurement.

Contact Effect of ReS2/Metal Interface.

Rhenium disulfide (ReS2) has attracted immense interest as a promising two-dimensional material for optoelectronic devices owing to its outstanding photonic response based on its energy band gap's insensitivity to the layer thickness. Here, we theoretically calculated the electrical band structure of mono-, bi-, and trilayer ReS2 and experimentally found the work function to be 4.8 eV, which was shown to be independent of the layer thickness. We also evaluated the contact resistance of a ReS2 field-effect transistor using a Y-function method with various metal electrodes, including graphene. The ReS2 channel is a strong n-type semiconductor, thus a lower work function than that of metals tends to lead to a lower contact resistance. Moreover, the graphene electrodes, which were not chemically or physically bonded to ReS2, showed the lowest contact resistance, regardless of the work function, suggesting a significant Fermi-level pinning effect at the ReS2/metal interface. In addition, an asymmetric Schottky diode device was demonstrated using Ti or graphene for ohmic contacts and Pt or Pd for Schottky contacts. The ReS2-based transistor used in this study on the work function of ReS2 achieved the possibility of designing the next-generation nanologic devices.

Microneedle-based minimally-invasive measurement of puncture resistance and fracture toughness of sclera.

UNLABELLED: The sclera provides the structural support of the eye and protects the intraocular contents. Since it covers a large portion of the eye surface and has relatively high permeability for most drugs, the sclera has been used as a major pathway for drug administration. Recently, microneedle (MN) technology has shown the possibility of highly local and minimally-invasive drug delivery to the eye by MN insertion through the sclera or the suprachoroidal space. Although ocular MN needs to be inserted through the sclera, there has been no systematic study to understand the mechanical properties of the sclera, which are important to design ocular MNs. In this study, we investigated a MN-based method to measure the puncture resistance and fracture toughness of the sclera. To reflect the conditions of MN insertion into the sclera, force-displacement curves obtained from MN-insertion tests were used to estimate the puncture resistance and fracture toughness of sclera tissue. To understand the effect of the insertion conditions, dependency of the mechanical properties on insertion speeds, pre-strain of the sclera, and MN sizes were analyzed and discussed. STATEMENT OF SIGNIFICANCE: Measurement of mechanical property of soft biological tissue is challenging due to variations between tissue samples or lack of well-defined measurement techniques. Although non-invasive measurement techniques such as nano/micro indentation were employed to locally measure the elastic modulus of soft biological materials, mechanical properties such as puncture resistance or fracture toughness, which requires "invasive" measurement and is important for the application of "microneedles or hypodermic needles", has not been well studied. In this work, we report minimally-invasive measurement of puncture resistance and fracture toughness of sclera using a double MN insertion method. Parametric studies showed that use of MN proved to be advantageous because of minimally-invasive insertion into tissue as well as higher sensitivity to sub-tissue architecture during the measurement.

5-Nitro-5'-hydroxy-indirubin-3'-oxime (AGM130), an indirubin-3'-oxime derivative, inhibits tumor growth by inducing apoptosis against non-small cell lung cancer in vitro and in vivo.

This study examined the anti-tumor effects of AGM130, a novel indirubin-3'-oxime derivative in A549 human non-small cell lung cancer cells. AGM130 significantly inhibited the proliferation and arrested the cell cycle of G2/M phase. Induction of apoptosis was detected in AGM130-treated A549 cells. The protein levels of Cytochrome c release, Bax, cleaved caspases and PARP were increased in AGM130 treated cells, whereas Bcl-2 levels were decreased. AGM130 inhibited Insulin-like growth factor 1 receptor (IGF1R), AKT/mTOR signaling and inactivated mitogen-activated protein kinases (MAPK). AGM130 also induced slight autophagy as pro-survival function and autophagy inhibition by chloroquine (CQ) induced necrosis. In vivo tumor xenograft model, AGM130 dose-dependently suppressed transplanted A549 cell tumor growth and induced the expression of proliferative cell nuclear antigen (PCNA). AGM130 also increased TUNEL positive apoptotic cell populations and the induction of glandular differentiation with mucin pool compared with vehicle-treated control in tumor tissue. These results suggest that AGM130 is an effective novel indirubin-3'-oxime derivative of anti-cancer drug and may be an attractive candidate for non-small cell lung cancer therapy.

Discovery of novel 2,5-dioxoimidazolidine-based P2X(7) receptor antagonists as constrained analogues of KN62.

Novel 2,5-dioxoimidazolidine-based conformationally constrained analogues of KN62 (1) were developed as P2X7 receptor (P2X7R) antagonists using a rigidification strategy of the tyrosine backbone of 1. SAR analysis of the 2,5-dioxoimidazolidine scaffold indicated that piperidine substitution at the N3 position and no substitution at N1 position were preferable. Further optimization of the substituents at the piperidine nitrogen and the spacer around the skeleton resulted in several superior antagonists to 1, including 1-adamantanecarbonyl analogue 21i (IC50 = 23 nM in ethidium uptake assay; IC50 = 14 nM in IL-1ß ELISA assay) and (3-CF3-4-Cl)benzoyl analogue (-)-21w (54 nM in ethidium uptake assay; 9 nM in IL-1ß ELISA assay), which was more potent than the corresponding (+) isomer. Compound 21w displayed potent inhibitory activity in an ex vivo model of LTP-induced pain signaling in the spinal cord and significant anti-inflammatory activity in in vivo models of carrageenan-induced paw edema and type II collagen-induced joint arthritis.

Orotic acid induces hypertension associated with impaired endothelial nitric oxide synthesis.

Orotic acid (OA) is an intermediate of pyrimidine nucleotide biosynthesis. Hereditary deficiencies in some enzymes associated with pyrimidine synthesis or the urea cycle induce OA accumulation, resulting in orotic aciduria. A link between patients with orotic aciduria and hypertension has been reported; however, the molecular mechanisms remain elusive. In this study, to elucidate the role of OA in vascular insulin resistance, we investigated whether OA induced endothelial dysfunction and hypertension. OA inhibited insulin- or metformin-stimulated nitric oxide (NO) production and endothelial NO synthase (eNOS) phosphorylation in human umbilical vein endothelial cells. A decreased insulin response by OA was mediated by impairment of the insulin-stimulated phosphoinositide 3-kinase (PI3K)-protein kinase B (PKB/Akt) signaling pathway in cells overexpressing the p110-PI3K catalytic subunit. Impaired effects of metformin on eNOS phosphorylation and NO production were reversed in cells transfected with constitutively active AMP-activated protein kinase. Moreover, experimental induction of orotic aciduria in rats caused insulin resistance, measured as a 125% increase in the homeostasis model assessment, and hypertension, measured as a 25% increase in systolic blood pressure. OA increased the plasma concentration of endothelin-1 by 201% and significantly inhibited insulin- or metformin-induced vasodilation. A compromised insulin or metformin response on the Akt/eNOS and AMP-activated protein kinase/eNOS pathway was observed in aortic rings of OA-fed rats. Taken together, we showed that OA induces endothelial dysfunction by contributing to vascular and systemic insulin resistance that affects insulin- or metformin-induced NO production, leading to the development of hypertension.

High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces.

Bulk nanostructured metals can attribute both exceptional strength and poor thermal stability to high interfacial content, making it a challenge to utilize them in high-temperature environments. Here we report that a bulk two-phase bimetal nanocomposite synthesised via severe plastic deformation uniquely possesses simultaneous high-strength and high thermal stability. For a bimetal spacing of 10 nm, this composite achieves an order of magnitude increase in hardness of 4.13 GPa over its constituents and maintains it (4.07 GPa), even after annealing at 500 °C for 1 h. It owes this extraordinary property to an atomically well-ordered bimaterial interface that results from twin-induced crystal reorientation, persists after extreme strains and prevails over the entire bulk. This discovery proves that interfaces can be designed within bulk nanostructured composites to radically outperform previously prepared bulk nanocrystalline materials, with respect to both mechanical and thermal stability.