RESUMO
Metallic Zn is considered as a promising anode material because of its abundance, eco-friendliness, and high theoretical capacity. However, the uncontrolled dendrite growth and side reactions restrict its further practical application. Herein, we proposed a ß-cyclodextrin-modified multiwalled carbon nanotube (CD-MWCNT) layer for Zn metal anodes. The obtained CD-MWCNT layer with high affinity to Zn can significantly reduce the transfer barrier of Zn2+ at the electrode/electrolyte interface, facilitating the uniform deposition of Zn2+ and suppressing water-caused side reactions. Consequently, the Zn||Zn symmetric cell assembled with CD-MWCNT shows a significantly enhanced cycling durability, maintaining a cycling life exceeding 1000 h even under a high current density of 5 mA cm-2. Furthermore, the full battery equipped with a V2O5 cathode displays an unparalleled long life. This work unveils a promising avenue toward the achievement of high-performance Zn metal anodes.
RESUMO
Zinc metal is widely considered as the primary option for constructing various aqueous batteries due to its cost-effectiveness, safety, and environmental friendliness. However, the Zn anode continues to be plagued by parasitic reactions and dendrite growth in aqueous electrolytes, limiting the practical implementation of zinc ion batteries (ZIBs) for large-scale energy storage. Herein, a foveolate ZnTe nanoarray is developed as a protective layer to enhance the chemical reversibility during Zn plating/stripping. The semi-conductive ZnTe with excellent ionic conductivity and hydrophobicity can effectually prevent the corrosion reactions, hydrogen generation and dendritic growth on the surface of the Zn anode. As a result, the Zn@ZnTe symmetrical cells achieve ultrahigh cycling stability (over 2800 h at 2 mA cm-2 and 1 mA h cm-2) and simultaneously deliver a low voltage hysteresis of 28 mV. Additionally, the durable Zn@ZnTe//V2O5 cells exhibit a remarkable capacity retention of 96.7% after 3000 cycles, surpassing that of the Zn//V2O5 cells. This work provides a straightforward and low-cost strategy to regulate the interface chemistry of the Zn anode, which may open a way for the development of practical ZIBs.
RESUMO
The development of biomimetic structures with integrated extracellular matrix (ECM) components represents a promising approach to biomaterial fabrication. Here, an artificial ECM, comprising the structural protein collagen I and elastin (ELN), as well as the glycosaminoglycan hyaluronan (HA), is reported. Specifically, collagen and ELN are electrochemically aligned to mimic the compositional characteristics of the dermal matrix. HA is incorporated into the electro-compacted collagen-ELN matrices via adsorption and chemical immobilization, to give a final composition of collagen/ELN/HA of 7:2:1. This produces a final collagen/ELN/hyaluronic acid scaffold (CEH) that recapitulates the compositional feature of the native skin ECM. This study analyzes the effect of CEH composition on the cultivation of human dermal fibroblast cells (HDFs) and immortalized human keratinocytes (HaCaTs). It is shown that the CEH scaffold supports dermal regeneration by promoting HDFs proliferation, ECM deposition, and differentiation into myofibroblasts. The CEH scaffolds are also shown to support epidermis growth by supporting HaCaTs proliferation, differentiation, and stratification. A double-layered epidermal-dermal structure is constructed on the CEH scaffold, further demonstrating its ability in supporting skin cell function and skin regeneration.
Assuntos
Ácido Hialurônico , Pele , Humanos , Ácido Hialurônico/farmacologia , Ácido Hialurônico/química , Pele/metabolismo , Matriz Extracelular/química , Colágeno/química , Elastina/farmacologia , FibroblastosRESUMO
Aqueous rechargeable zinc-based batteries (ZBBs) are emerging as desirable energy storage systems because of their high capacity, low cost, and inherent safety. However, the further application of ZBBs still faces many challenges, such as the issues of uncontrolled dendrite growth and severe parasitic reactions occurring at the Zn anode. Herein, an amino-grafted bacterial cellulose (NBC) film is prepared as artificial solid electrolyte interphase (SEI) for the Zn metal anodes, which can significantly reduce zinc nucleation overpotential and lead to the dendrite-free deposition of Zn metal along the (002) crystal plane more easily without any external stimulus. More importantly, the chelation between the modified amino groups and zinc ions can promote the formation of an ultra-even amorphous SEI upon cycling, reducing the activity of hydrate ions, and inhibiting the water-induced side reactions. As a result, the Zn||Zn symmetric cell with NBC film exhibits lower overpotential and higher cyclic stability. When coupled with the V2 O5 cathode, the practical pouch cell achieves superior electrochemical performance over 1000 cycles.
RESUMO
Commercial tissue adhesives such as fibrin, albumin-glutaraldehyde, and cyanoacrylates often suffer from the limitations of adverse inflammatory reactions, lack of bioactivity, and/or weak wet adhesion. There is a need to develop advanced tissue adhesives which possess adequate wet adhesion and appropriate biodegradability and biocompatibility. The wet adhesion of the catechol group to a variety of substrates is well-known. Further, it undergoes Michael addition with an amine or thiol group, which makes catechol-containing polymers appealing as tissue adhesives because there are abundant amine and thiol groups in native tissue. We present here a composite tissue adhesive based on a catechol-modified polymer that utilizes poly-l-lysine (PLL) as a bridging molecule to promote the interfacing with cells and tissues. Hyaluronic acid (HA) was chosen here as the polymer backbone for functionalization with catechol moieties, which is attributable to its multiple biological activities. The cross-linking conditions of catechol-functionalized HA (HACA) were optimized, and the swelling and degradation behavior of the cross-linked hydrogels were characterized. The PLL/HACA-based adhesive demonstrated good adhesion to hydrogels derived from collagen and gelatin that act as a simplified soft tissue model, and to porcine skin tissue. Moreover, the adhesive supported culture of a human umbilical vein endothelial cell line (HUV-EC-C) with high cell viability and formation of capillary-like structure. This may bring added benefit by means of promoting angiogenesis, therefore promoting the integration between host tissue and implant. Our results indicate that PLL/HACA could be a promising tissue adhesive for multiple internal uses.
RESUMO
Hyaluronic acid oligosaccharides (oHAs) have shown promising results in promoting vascular endothelial cell (EC) proliferation and endothelialization. To engineered develop tissue scaffold for promoting EC proliferation and vessel endothelialization, different sizes of oHAs were prepared and grafted onto collagen to improve the biological properties of the synthesized materials, especially in angiogenesis. Firstly, oHAs were successfully prepared and conjugated with collagen to construct glycosylated collagens by reductive amination. The glycosylated collagens were then electrospun into various nanofibrous structures and their morphology and hemocompatibility, as well as EC responses on these nanofibrous scaffolds, were studied to evaluate the potential for vascular tissue engineering. The results showed that the nanofibrous scaffolds grafted by oHAs promoted EC proliferation whereas high molecular weight HA inhibited proliferation. The scaffolds had no detectable degree of hemolysis and coagulation, suggesting their promise as engineered vascular tissue scaffolds.
Assuntos
Colágeno/química , Células Endoteliais/citologia , Células Endoteliais/efeitos dos fármacos , Ácido Hialurônico/farmacologia , Nanofibras/química , Oligossacarídeos/farmacologia , Engenharia Tecidual , Animais , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Hemólise/efeitos dos fármacos , Ácido Hialurônico/química , Artéria Ilíaca/citologia , Oligossacarídeos/química , Tamanho da Partícula , Propriedades de Superfície , SuínosRESUMO
Skin autografts are in great demand due to injuries and disease, but there are challenges using live tissue sources, and synthetic tissue is still in its infancy. In this study, an electrocompaction method was applied to fabricate the densely packed and highly ordered collagen/sulfated xylorhamnoglycuronan (SXRGlu) scaffold which closely mimicked the major structure and components in natural skin tissue. The fabricated electrocompacted collagen/SXRGlu matrices (ECLCU) were characterized in terms of micromorphology, mechanical property, water uptake ability and degradability. The viability, proliferation and morphology of human dermal fibroblasts (HDFs) cells on the fabricated matrices were also evaluated. The results indicated that the electrocompaction process could promote HDFs proliferation and SXRGlu could improve the water uptake ability and matrices' stability against collagenase degradation, and support fibroblast spreading on the ECLCU matrices. Therefore, all these results suggest that the electrocompacted collagen/SXRGlu scaffold is a potential candidate as a dermal substitute with enhanced biostability and biocompatibility.
RESUMO
The nHAC/CSH composite is an injectable bone repair material with controllable injectability and self-setting properties prepared by introducing calcium sulfate hemihydrate (CSH) into mineralized collagen (nHAC). When mixed with water, the nHAC/CSH composites can be transformed into mineralized collagen/calcium sulfate dihydrate (nHAC/CSD) composites. The nHAC/CSD composites have good biocompatibility and osteogenic capability. Considering that the degradation behavior of bone repair material is another important factor for its clinical applications, the degradability of nHAC/CSD composites was studied. The results showed that the degradation ratio of the nHAC/CSD composites with lower nHAC content increased with the L/S ratio increase of injectable materials, but the variety of L/S ratio had no significant effect on the degradation ratio of the nHAC/CSD composites with higher nHAC content. Increasing nHAC content in the composites could slow down the degradation of nHAC/CSD composite. Setting accelerator had no significant effect on the degradability of nHAC/CSD composites. In vivo histological analysis suggests that the degradation rate of materials can match the growth rate of new mandibular bone tissues in the implanted site of rabbit. The regulable degradability of materials resulting from the special prescriptions of injectable nHAC/CSH composites will further improve the workability of nHAC/CSD composites.