RESUMO
A discrete core-shell-like micro-light-emitting diode (micro-LED) array was grown on a 100 nm-thick sapphire nano-membrane array without harmful plasma etching for chip singulation. Due to proper design for the sapphire nano-membrane array, an array of multi-faceted micro-LEDs with size of 4 µm × 16 µm was grown. Threading dislocation density in the micro-LED formed on sapphire nano-membrane was reduced by 59.6% due to the sapphire nano-membranes, which serve as compliant substrates, compared to GaN formed on a planar substrate. Enhancements in internal quantum efficiency by 44% and 3.3 times higher photoluminescence intensity were also observed from it. Cathodoluminescence emission at 435 nm was measured from c-plane multiple quantum wells (MQWs), whereas negligible emissions were detected from semi-polar sidewall facets. A core-shell-like MQWs were formed on all facets, hopefully lowering concentration of non-radiative surface recombination centers and reducing leakage current paths. This study provides an attractive platform for micro-LEDs by using sapphire nano-membrane.
RESUMO
Most electrolytes for rechargeable Mg batteries require time-consuming conditioning or precycling process to achieve a fully reversible Mg deposition/dissolution, which hinders the normal operation of Mg batteries. This study details a simple and effective method for eliminating this conditioning behavior using heptamethyldisilazane (HpMS) as an electrolyte additive. It was found that the HpMS additive greatly increases the current density and Coulombic efficiency of Mg deposition/dissolution from the initial cycles in various sulfone and glyme solutions containing MgCl2 or Mg(TFSI)2. The beneficial effect of HpMS was ascribed to its ability to scavenge trace water in the electrolytes and remove Mg(OH)2 and Mg(TFSI)2-decomposition products from the Mg surface. Considering its applicability for a wide range of Mg electrolytes, the use of HpMS is expected to accelerate the development of practical Mg batteries.
RESUMO
The atomic-scale synthesis of artificial oxide heterostructures offers new opportunities to create novel states that do not occur in nature. The main challenge related to synthesizing these structures is obtaining atomically sharp interfaces with designed termination sequences. In this study, it is demonstrated that the oxygen pressure (PO2) during growth plays an important role in controlling the interfacial terminations of SrRuO3 /BaTiO3 /SrRuO3 (SRO/BTO/SRO) ferroelectric (FE) capacitors. The SRO/BTO/SRO heterostructures are grown by a pulsed laser deposition method. The top SRO/BTO interface, grown at high PO2 (around 150 mTorr), usually exhibits a mixture of RuO2 -BaO and SrO-TiO2 terminations. By reducing PO2, the authors obtain atomically sharp SRO/BTO top interfaces with uniform SrO-TiO2 termination. Using capacitor devices with symmetric and uniform interfacial termination, it is demonstrated for the first time that the FE critical thickness can reach the theoretical limit of 3.5 unit cells.
RESUMO
The influence of Bi modification of Pt anode catalyst on the performance of direct formic acid fuel cells was investigated. Compared with the unmodified Pt anode, the Bi modified Pt (PtBi(m)) electrode prepared by under-potential deposition (UPD) caused faster electrocatalytic oxidation of formic acid at the same value of the overpotential, and thus, PtBi(m) resulted in an increase in the power performance of direct formic acid fuel cells. Electrochemical impedance spectra helped to explain the difference of performance between the unmodified Pt and Bi modified Pt electrodes. Solution conductivity and dehydration phenomena occurring in highly concentrated formic acid solutions can also explain the higher power performance of PtBi(m).
RESUMO
To investigate the antibiotic activity and synergistic effect, analogues were designed to increase not only net positive charge by Lys-substitution but also hydrophobic helix region by Leu-substitution from CA (1-8)-MA (1-12) hybrid peptide (CA-MA). In particular, CA-MA analogue P5 (P5), designed by flexible region (GIG-->P)-substitution, Lys- (positions 4, 8, 14, 15) and Leu- (positions 5, 6, 12, 13, 16, 17, 20) substitutions, showed potent antibacterial activity in minimal inhibition concentration (MIC) and minimal bactericidal concentration (MBC) without having hemolytic activity. In addition, P5 and chloramphenicol has potent synergistic effect against tested cell lines. As determined by propidium iodide (PI) staining, flow cytometry showed that P5 plus chloramphenicol-treated cells had higher fluorescence intensity than untreated, P5- and chloramphenicol-treated cells. The effect on plasma membrane was examined by investigating the transmembrane potential depolarizing experiments of S. aureus with P5 and chloramphenicol. The result showed that the peptide exerts its antibacterial activity by acting on the plasma membrane. Furthermore, P5 caused significant morphological alterations of S. aureus, as shown by scanning electron microscopy. Our results suggest that peptide P5 is an excellent candidate as a lead compound for the development of novel anti-infective agents and synergistic effects with conventional antibiotic agents but lack hemolytic activity.