RESUMO
In recent years, the number of available chemical pesticides has been dramatically reduced, urging the need for the discovery of alternatives to chemical pesticide products such as, among others, natural zeolites (zeolitic rocks). We determined the mineralogical and chemical composition of a specific and continuous layer of zeolitic rock sample (ZeotP) from Petrota, Evros, Greece, and evaluated its oviposition-deterrent effect on the olive fruit fly Bactrocera oleae Gmelin (Diptera: Terphritidae). The tested natural zeolite contained 70 wt. % clinoptilolite, 18 wt. % amorphous material, 7 wt. % feldspars, 4 wt. % cristobalite, and 1 wt. % quartz. We tested the oviposition-deterrent effect of ZeotP mixed or not with an emulsifier adjuvant, NU-FILM-P®, in water and applied it to the surface of olive fruits. The ZeotP oviposition-deterrent effect on the olive fly was very high under a series of tested temperatures (17 °C, 20 °C, 25 °C, and 30 °C) and RHs (23%, 33%, 55%, 75%, and 94%). In addition, the ZeotP residual deterrent effect after equable water spraying was high, like the respective effect of the pyrethroid insecticide Decis® (deltamethrin). Our results may contribute to the effective control of the olive fruit fly using an alternative to chemical pesticides: natural zeolite (zeolitic rocks) products.
RESUMO
Hexavalent chromium (Cr (VI)) is an environmental contaminant brining high concerns due to its higher toxicity and mobility in comparison with trivalent chromium Cr(III). Cr (VI) has been linked with several adverse health effects, including respiratory diseases, lung cancer, and skin irritation. The primary sources of it in the environment are industrial activities.Most of the time, fly ash made of lignite can release Cr(VI) when it comes into contact with water in an aquatic environment. The objective of this study is the investigation of Cr (VI) concentration in leachates of fly ash and marl mixtures and the determination of its solubility under different pH conditions. Samples of fly ash were collected from the Power Plant of Agios Dimitrios. Additionally, samples of marl were collected from the mine of South Field, and both samples were mixed and prepared in in different proportions (% w.t.). The leaching experiments were carried out according to the EN-12457/1-4 (2003) standard under different pH conditions and chemical analysis of the leachates were performed by spectrophotometry with diphenylcarbazide (DPC). The environmental footprint of Cr (VI) in the study area was significant, especially in mixtures containing higher concentrations of fly ash. A critical pH range between 6 to 12 is observed. At acidic pH values, a high release of Cr (VI) was observed, while at the mentioned critical values (pH 10-12), a gradual decrease in its leachability was noticed. The high concentrations of Cr (VI) in the industrial area studied require immediate actions in terms of managing and limiting the potential hazardous impacts on the environment and by extension on the public health by developing appropriate prevention strategies.
Assuntos
Cromo , Cinza de Carvão , Humanos , Grécia , Cromo/toxicidade , Cromatografia GasosaRESUMO
Inorganic arsenic (As), a carcinogenic element to humans, is among the most dangerous and flammable substances that coal-burning plants could release. When coal is burned, large portions of arsenic are captured on fly-ash (FA) particles, but it could also contribute significantly to stack emissions of fine fly-ash particles. The aim of this study was to evaluate the oral and respiratory bioaccessibility of arsenic in lignite fly-ash (LFA) samples, and their contribution to total As exposure. Arsenic bioaccessibility fractions via ingestion and inhalation showed significant differences, suggesting the presence of highly soluble As-bearing phases in the studied LFA samples. The bioaccessible As fractions (BAF%) in the simulated gastric fluids (UBM protocol, ISO 17924:2018) showed a range of 45-73%, while the pulmonary bioaccessibility rates in the simulated lung fluid (artificial lung fluid (ALF)) exhibited significantly enhanced levels ranging from 86% to 95%. The obtained arsenic bioaccessibility rates were compared with previous data for multiple environmental matrices such as soil and dust-related materials, revealing that LFA exhibited significantly higher bioaccessibility (%) for the inhalation pathway.
RESUMO
PURPOSE: The investigation of zirconia core surface pretreatments on the flexural strength of bilayered zirconia ceramics before and after artificial accelerating aging. METHODS: Ninety bar-shaped specimens were manufactured from Yttria Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) and divided in three groups depending on zirconia surface pretreatment before veneering: layering with liner, pretreatment with silane-containing gas flame (SGF) with the Silano-Pen device and alumina air-abrasion. Half of the veneered specimens in each group (n=15) underwent artificial accelerating aging. A 4-point bending test was performed to determine flexural strength. Three specimens from each group were further analyzed using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) before veneering and after fracture (aged and non-aged subgroups). RESULTS: Alumina air-abrasion was correlated to increased phase transformation from tetragonal to monoclinic zirconia phase. Qualitative analysis revealed that with the majority of the specimens pretreated with the silane-containing gas flame, areas of the veneering material remained firmly attached to the zirconia core after flexural strength testing. There was no statistically significant difference on the flexural strength among the groups before or after aging. Artificial accelerating aging resulted in statistically significant higher flexural strength of the specimens after aging. CONCLUSION: SGF pretreatment can be an acceptable and feasible alternative method before the veneering of Y-TZP zirconia as it presented slightly higher bond strength compared with alumina air-abrasion which was associated with higher tetragonal to monoclinic (tâm) phase transformation. Accelerating aging leads to an increase of the mechanical properties under in vitro conditions.
Assuntos
Resistência à Flexão , Silanos , Óxido de Alumínio/química , Cerâmica/química , Materiais Dentários/química , Teste de Materiais , Propriedades de Superfície , Ítrio/química , Zircônio/químicaRESUMO
INTRODUCTION: The aim of the present study was to investigate how different aging protocols can affect the flexural strength and phase transformations of yttrium-stabilized zirconia ceramics (Y-TZP) for monolithic restorations. MATERIALS AND METHODS: Bar-shaped specimens from two zirconia ceramics bars were divided into three groups: a. no treatment (c), b. aging in an autoclave (a), and c. thermal cycling (t). The flexural strength was determined by the 3-point bending test and statistical analysis was performed to determine significant differences (p< 0.05). Weibull statistics was used to analyze the dispersion of strength values while surface microstructural analysis was performed through X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). RESULTS: Aging did not significantly affect the flexural strength but differences were recorded between the two groups, with group A presenting higher strength values and m-phase percentages. CONCLUSIONS: The observed differences between the two ceramics could be attributed to variations in composition and processing.
Assuntos
Resistência à Flexão , Zircônio , Cerâmica , Materiais Dentários , Teste de Materiais , Estresse Mecânico , Propriedades de Superfície , ÍtrioRESUMO
Two size classes of piroxicam (PXC) pellets (mini (380-550 µm) and conventional (700-1200 µm)) were prepared using extrusion/spheronization and medium viscosity chitosan (CHS). Mixture experimental design and numerical optimization were applied to distinguish formulations producing high sphericity pellets with fast or extended release. High CHS content required greater wetting liquid volume for pellet formation and the diameter decreased linearly with volume. Sphericity increased with CHS for low-to-medium drug content. Application of PXRD showed that the drug was a mixture of form II and I. Crystallinity decreased due to processing and was significant at 5% drug content. Raman spectroscopy showed no interactions. At pH 1.2, the dissolved CHS increased 'apparent' drug solubility up to 0.24 mg/mL while, at pH 5.6, the suspended CHS increased 'apparent' solubility to 0.16 mg/mL. Release at pH 1.2 was fast for formulations with intermediate CHS and drug levels. At pH 5.6, conventional pellets showed incomplete release while mini pellets with a CHS/drug ratio ≥2 and up to 21.25% drug, showed an extended release that was completed within 8 h. Numerical optimization provided optimal formulations for fast release at pH 1.2 with drug levels up to 40% as well as for extended release formulations with drug levels of 5% and 10%. The Weibull model described the release kinetics indicating complex or combined release (parameter 'b' > 0.75) for release at pH 1.2, and normal diffusion for the mini pellets at pH 5.6 ('b' from 0.63 to 0.73). The above results were attributed mainly to the different pellet sizes and the extensive dissolution/erosion of the gel matrix was observed at pH 1.2 but not at pH 5.6.
RESUMO
Fossil bones and sediments from different horizons of the Upper Miocene paleontological site of Platania, Drama-Greece were studied using 238U, 235U, 232Th series and 40K measurements obtained by γ-spectroscopy. Additionally, SEM and XRF analysis was applied to bone and sediment samples while a lithological analysis of the sediments was also carried out. The 226Ra/238U ratios in the fossilization layers are attributed to the 238U depletion from the sediment and its incorporation into the fossils. The 226Ra/231Pa ratio indicates that the absorption of the isotopes started long before 4.2 Ma ago. The 232Th/40K profile demonstrate two distinct geological substrates, the lower corresponding to the Upper Miocene whereas the upper to the Upper Pleistocene-Holocene. Among them mediates a Mn-rich layer associated with the "Zanclean flood" during Pliocene. One layer above the "Glacial maximum event" during the Early Pleistocene was recorded. The natural radioactive sedimentary profile obtained reproduces the paleo-climatic conditions in Southeast Europe, which could be useful for the future.
Assuntos
Paleontologia , Monitoramento de Radiação , Radiação de Fundo , Clima , Europa (Continente) , Sedimentos Geológicos/química , Radioatividade , Rádio (Elemento)/análise , Tório/análise , Urânio/análiseRESUMO
The aim of this study was to evaluate microhardness and elastic modulus of a novel sol-gel derived dental ceramic -â¯58S bioactive glass composite (BP67: Bioactive Glass:33.3%, Dental Ceramic:66.7%) BP671 material by micro-indentation and to investigate its microstructure and bioactivity. The research hypotheses were that the values of microhardness (1) and elastic modulus (2) of the novel bioceramic composite and the commercial dental ceramic will be of the same order. The experimental sol-gel derived ceramics showed similar microstructural characteristics to a commercial feldspathic porcelain, and presence of additional calcium phosphate phases, which contributed its bioactivity. The formation of an apatite-like layer on the materials' surface observed by Fourier Transform Infrared (FTIR)2 spectroscopy, X-ray Diffraction (XRD)3 and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS)4 techniques after 12 days of maintenance in Conventional Simulated Body Fluid (cSBF)5 solution. The BP67 exhibited values of microhardness and modulus of elasticity which were not statistically significant different compared to dental ceramic, indicating the adequate mechanical integrity of the material. The results of this study suggest that the novel bioactive composite could be potentially applied in prosthetic dentistry, while its thermal and optical properties should be investigated in future studies.
Assuntos
Porcelana Dentária/química , Vidro/química , Teste de Materiais , Fenômenos Mecânicos , Módulo de ElasticidadeRESUMO
Hexavalent chromium is one of the most toxic and carcinogenic species known and can be released into the environment from several sources. In Sarigkiol basin (N Greece) the presence of Cr(VI) in soil, sediments and groundwater may originate from both natural (ophiolitic rocks and their weathering products) and anthropogenic (dispersed fly ash produced from lignite power plants) sources. In this study, the distribution of contents and origin of environmentally available Cr(VI) in soils, sediments, regoliths and fly ash of Sarigkiol basin is presented. Detailed geochemical and mineralogical studies were performed on soil samples (up to 1â¯m) and regoliths, while leaching tests were also applied to fresh and old fly ash samples. Leachable chromium from soil and sediment samples generally increased with depth and the highest concentrations were observed near to the power plant of Agios Dimitrios. The speciation of chromium in leachates revealed that Cr(VI) concentrations accounted for more than 96% of total Cr. Leaching tests of regoliths established that the natural contribution of Cr(VI) is up to 14⯵gâ¯kg-1. Therefore, the measurement of higher concentrations (up to 80⯵gâ¯kg-1) of environmentally available Cr(VI) in soils and sediments can be attributed to the impact/presence of dispersed fly ash in the soils and sediments of the same area. This was also supported by the low correlation recorded between environmentally available chromium and Cr-bearing minerals (mainly serpentine and talc). The influenced zone is located in the eastern part of the basin near the local power plant and surrounds an open conveyor belt that transfers fly ash to an open temporary storage pit. This zone overlies an unconfined porous aquifer thus explaining the elevated concentrations of Cr(VI) in groundwater (up to 120⯵gâ¯L-1) previously reported in this area.
Assuntos
Cromo/análise , Cinza de Carvão/análise , Monitoramento Ambiental , Poluentes do Solo/análise , Solo/química , Poluentes da Água/análise , Grécia , Água Subterrânea/química , MineraisRESUMO
Objective/significance: To elucidate the role of plasticizers in different mini matrices and correlate mechanical properties with drug release. METHODS: Cylindrical pellets were prepared by hot-melt extrusion (HME) and mini tablets by hot (HC) and ambient compression (AC). Venlafaxine HCl was the model drug, Eudragit® RSPO the matrix former and citric acid or Lutrol® F127 the plasticizers. The matrices were characterized for morphology, crystallinity, and mechanical properties. The influence of plasticizer's type and content on the extrusion pressure (Pe) during HME and ejection during tableting was examined and the mechanical properties were correlated with drug release parameters. RESULTS: Resistance to extrusion and tablet ejection force were reduced by Lutrol® F127 which also produced softer and weaker pellets with faster release, but harder and stronger HC tablets with slower release. HME pellets showed greater tensile strength (T) and 100 times slower release than tablets. Pe correlated with T and resistance to deformation of the corresponding pellets (r2 = 0.963 and 0.945). For both HME and HC matrices the decrease of drug release with T followed a single straight line (r2 = 0.990) and for HME the diffusion coefficient (De) and retreat rate constant (kb) decreased linearly with T (r2 = 0.934 and 0.972). CONCLUSIONS: Lutrol® F127 and citric acid are efficient plasticizers and Lutrol® F127 is a thermal binder/lubricant in HC compression. The different bonding mechanisms of the matrices were reflected in the mechanical strength and drug release. Relationships established between T and drug release parameters for HME and HC matrices may be useful during formulation work.
Assuntos
Ácido Cítrico/química , Polietilenos/química , Polipropilenos/química , Tecnologia Farmacêutica/métodos , Cloridrato de Venlafaxina/química , Liberação Controlada de Fármacos , Tamanho da Partícula , Ácidos Polimetacrílicos/química , Pressão , Solubilidade , Propriedades de Superfície , Comprimidos , Temperatura , Resistência à TraçãoRESUMO
We studied the insecticidal activity of different concentrations of very high quality natural zeolites (zeolitic rock containing 92 wt% clinoptilolite) applied on dry beans. The test species was adult bean weevils Acanthoscelides obtectus (Say; Coleoptera: Bruchidae), and the variables included different temperatures and humidity regimes. At certain natural zeolite concentrations the adult mortality approached 100% within the first day of exposure. The lethal natural zeolite concentration for 50% adult mortality (LD50) was 1.1 g/kg dry beans 1 d after exposure. The temperature had no significant effects on the insecticidal potential of the tested natural zeolite formulations. The lethal time (LT) for 50% adult mortality (LT50), at a concentration of 0.5 g/kg dry beans was 106.429, 101.951, and 90.084 min at 15, 20, and 25°C, respectively. It did not differ significantly. In contrast, relative humidity (RH) and exposure time as well as their interactions had a significant effect on natural zeolite formulation and insecticidal potential. At a constant concentration of 0.5 g/kg dry beans and 25°C at 23%, 34%, 53%, and 88% RH the LT50 ranged from 61.6 to 75.9 min; at 72% RH the LT50 was 110.6 min. The results indicate that natural zeolite at low concentrations is promising for the control of the bean weevil under different temperatures and RH regimes.
Assuntos
Inseticidas , Gorgulhos , Zeolitas , Animais , Relação Dose-Resposta a Droga , Feminino , Armazenamento de Alimentos , Inseticidas/química , Phaseolus , Zeolitas/químicaRESUMO
STATEMENT OF PROBLEM: The color of an esthetic restoration and its color stability are important for long-term success. However, the impact of common beverages on lithium disilicate ceramic is not well known. PURPOSE: The purpose of this in vitro study was to investigate color variations of lithium disilicate ceramics after thermocycling (TC) and immersion in commonly consumed beverages. MATERIAL AND METHODS: A total of 288 specimens (1×10×10 mm) were fabricated from IPS e-max computer-aided design (CAD) (n=72), IPS e-max CERAM ([CER] n=72), IPS e-max Press with glazing ([PG] n=72), and IPS e-max Press without glazing ([PNG] n=72) according to the manufacturer's instructions. Each group was divided into 4 subgroups (n=18): TC, coffee, black tea, and red wine. Thermocycling was performed at 21 900 cycles at 5°C, 37°C, 55°C, and 37°C (3 years' clinical simulation), whereas the specimens were soaked in the staining solutions for up to 54 hours (3 years' clinical simulation). Color parameters L*, a*, and b* were assessed with an ultraviolet-visible spectroscopy recording spectrophotometer. Color difference (ΔE) was calculated using the equation [ΔΕ= [(ΔL*)2 + (Δa*)2 + (Δb*)2]½]. Intraexaminer reliability was assessed by using the intraclass correlation coefficient. Two-way analysis of variance was used for the analysis of ΔΕ, and the parameters L*, a*, and b* were analyzed with linear mixed models for repeated measurements and the Bonferroni pair-wise comparison test (α=.05). RESULTS: Parameters ΔΕ, L*, a*, and b* were significantly affected by the interaction between material and treatment (P<.001). A ΔΕ >1 was recorded for PG with tea, wine, and coffee, PG after TC and CER after TC. For L*, greater reduction was observed for PNG with tea and CER after TC, whereas for a* significant changes were positive (to red shades), except for PNG with TC, where PNG with wine showed the greatest positive change. For b*, significant changes were negative (to blue shades) except for PNG with tea and coffee and CAD with tea. CONCLUSIONS: All groups demonstrated color changes below the clinically perceptible level (ΔΕ<3.7), except PNG in tea which showed statistically significant color differences (ΔΕ>4). CAD presented higher color stability compared with the nonglazed Press specimens.
Assuntos
Bebidas , Cor , Porcelana Dentária , Humanos , Imersão , Técnicas In Vitro , Teste de MateriaisRESUMO
This study aimed to investigate the potential of low-level laser irradiation (LLLI) to promote odontogenic differentiation and biomineralization by dental pulp stem cells (DPSCs) seeded inside bioceramic scaffolds. Mg-based, Zn-doped bioceramic scaffolds, synthesized by the sol-gel technique, were spotted with DPSCs and exposed to LLLI at 660 nm with maximum output power of 140 mw at fluencies (a) 2 and 4 J/cm2 to evaluate cell viability/proliferation by the MTT assay and (b) 4 J/cm2 to evaluate cell differentiation, using real-time PCR (expression of odontogenic markers) and a p-nitrophenylphosphate (pNPP)-based assay for alkaline phosphatase (ALP) activity measurement. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were used for structural/chemical characterization of the regenerated tissues. Exposure of the DPSCs/scaffold complexes to the proposed LLLI scheme was associated with statistically significant increase of odontogenesis-related markers (bone morphogenetic protein 2 (BMP-2): 22.4-fold, dentin sialophosphoprotein (DSPP): 28.4-fold, Osterix: 18.5-fold, and Runt-related transcription factor 2 (Runx2): 3.4-fold). ALP activity was significantly increased at 3 and 7 days inside the irradiated compared to that in the non-irradiated SC/DPSC complexes, but gradually decreased until 14 days. Newly formed Ca-P tissue was formed on the SC/DPSC complexes after 28 days of culture that attained the characteristics of bioapatite. Overall, LLLI treatment proved to be beneficial for odontogenic differentiation and biomineralization of DPSCs inside the bioceramic scaffolds, making this therapeutic modality promising for targeted dentin engineering.
Assuntos
Calcificação Fisiológica/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Polpa Dentária/citologia , Terapia com Luz de Baixa Intensidade , Magnésio/farmacologia , Odontogênese/efeitos dos fármacos , Células-Tronco/citologia , Alicerces Teciduais/química , Fosfatase Alcalina/metabolismo , Adesão Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Cerâmica/farmacologia , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Humanos , Reação em Cadeia da Polimerase em Tempo Real , Células-Tronco/ultraestruturaRESUMO
OBJECTIVES: Aims of this study were to investigate the optimal conditions of laser irradiation of a novel Bioactive Glass/Dental Ceramic-BP67 composite for acceleration of hydroxyapatite-HA formation and to assess cellular responses on the precipitated HA region. METHODS: BP67 (Bioactive Glass: 33.3%, Dental Ceramic: 66.7%) was fabricated by the sol-gel method. A laser assisted biomimetic-LAB process was applied to BP67 sintered specimens immersed in 1.5-times concentrated simulated body fluid-1.5×-SBF. The effect of various energy densities of pulsed nanosecond Nd-YAG (1064nm) laser and irradiation exposure times (30min, 1 and 3h) were evaluated for HA precipitation. The HA film was characterized by FTIR, XRD, SEM and micro Raman techniques. ICP-AES was used for revealing changes in chemical composition of the 1.5×-SBF during irradiation. Cell viability and morphological characteristics of periodontal ligament fibroblasts-PDLFs, human gingival fibroblasts-HGFs and SAOS-2 osteoblasts on the HA surface were evaluated by MTT assays and SEM. RESULTS: At optimal energy fluence of 1.52J/cm2 and irradiation time for 3h followed by immersion in 1.5×-SBF at 60°C, a dense HA layer was formed on laser-irradiated BP67 within 7 days. The resulting HA film was tightly bonded to the underlying substrate and had mineral composition similar to cementum. MTT assay showed a consistent reduction of cell proliferation on the HA layer in comparison to conventional control ceramic and BP67 for all 3 cell lines studied. SIGNIFICANCE: These findings suggest LAB is an effective method for acceleration of HA formation on materials with low bioactivity, while cellular responses need further investigation.
Assuntos
Cerâmica , Durapatita , Lasers de Estado Sólido , Porcelana Dentária , Vidro , Humanos , Microscopia Eletrônica de Varredura , Difração de Raios XRESUMO
OBJECTIVE: This study aimed to investigate the potential of Mg-based bioceramic scaffolds combined with human treated-dentin matrices (hTDMs) and dentinogenesis-related morphogens to promote odontogenic differentiation and dentin-like tissue formation by Dental Pulp Stem Cells-DPSCs. METHODS: DPSC cultures were established and characterized by flow cytometry. Experimental cavities were prepared inside crowns of extracted teeth and demineralized by EDTA (hTDMs). Zn-doped, Mg-based bioceramic scaffolds, synthesized by the sol-gel technique, were hosted inside the hTDMs. DPSCs were spotted inside the hTDMs/scaffold constructs with/without additional exposure to DMP-1 or BMP-2 (100ng/ml, 24h). Scanning Electron Microscopy-SEM, live/dead fluorescence staining and MTT assay were used to evaluate cell attachment and viability; Real time PCR for expression of osteo/odontogenic markers; Inductively Coupled Plasma-Atomic Emission Spectrometry-ICP/AES for scaffold elemental release analysis; ELISA for hTDM growth factor release analysis; SEM and X-ray Diffraction-XRD for structural/chemical characterization of the regenerated tissues. RESULTS: Scaffolds constantly released low concentrations of Mg(2+), Ca(2+), Zn(2+) and Si(4+), while hTDMs growth factors, like DMP-1, BMP-2 and TGFß-1. hTDMs/scaffold constructs supported DPSC viability, inducing their rapid odontogenic shift, indicated by upregulation of DSPP, BMP-2, osteocalcin and osterix expression. Newly-formed Ca-P tissue overspread the scaffolds partially transforming into bioapatite. Exposure to DMP-1 or BMP-2 pronouncedly enhanced odontogenic differentiation phenomena. SIGNIFICANCE: This is the first study to validate that combining the bioactivity and ion releasing properties of bioceramic materials with growth factor release by treated natural dentin further supported by exogenous addition of key dentinogenesis-related morphogens (DMP-1, BMP-2) can be a promising strategy for targeted dentin regeneration.
Assuntos
Diferenciação Celular , Polpa Dentária , Dentina , Regeneração , Alicerces Teciduais , Zinco , Proteína Morfogenética Óssea 2 , Células Cultivadas , Humanos , Células-TroncoRESUMO
Glass-ceramic scaffolds containing Mg have shown recently the potential to enhance the proliferation, differentiation, and biomineralization of stem cells in vitro, property that makes them promising candidates for dental tissue regeneration. An additional property of a scaffold aimed at dental tissue regeneration is to protect the regeneration process against oral bacteria penetration. In this respect, novel bioactive scaffolds containing Mg(2+) and Cu(2+) or Zn(2+), ions known for their antimicrobial properties, were synthesized by the foam replica technique and tested regarding their bioactive response in SBF, mechanical properties, degradation, and porosity. Finally their ability to support the attachment and long-term proliferation of Dental Pulp Stem Cells (DPSCs) was also evaluated. The results showed that conversely to their bioactive response in SBF solution, Zn-doped scaffolds proved to respond adequately regarding their mechanical strength and to be efficient regarding their biological response, in comparison to Cu-doped scaffolds, which makes them promising candidates for targeted dental stem cell odontogenic differentiation and calcified dental tissue engineering.
RESUMO
Combining chemical and physical-structural information of particles is a key issue in PM investigations. Chemical, mineralogical, and morphological characterization of quasi-ultrafine particles (PM 0.49) was carried out at two urban sites of varying traffic-influence (roadside and urban background) in Thessaloniki, northern Greece, during the cold and the warm period of 2013. Bulk analyses of chemical species included organic and elemental carbon (OC, EC), water soluble organic carbon (WSOC), ionic species (NO3(-), SO4(2-), Cl(-), Na(+), NH4(+), K(+), Mg(2+), Ca(2+)) and trace elements (As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Zn, Pt, Pd, Rh, Ru, and Ir). X-ray diffractometry (XRD) was employed for the mineralogical analysis of PM 0.49 in order to identify and quantify amorphous and crystalline phases. In addition, scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) was employed for morphological characterization and elemental microanalysis of individual particles. Findings of this work could provide the basis for designing epidemiological and toxicity studies to mitigate population exposure to UFPs.
Assuntos
Poluentes Atmosféricos/análise , Monitoramento Ambiental , Material Particulado/análise , Grécia , Tamanho da Partícula , Estações do AnoRESUMO
OBJECTIVES: Dental zirconia restorations should present long-term clinical survival and be in service within the oral environment for many years. However, low temperature degradation could affect their mechanical properties and survival. The aim of this study was to investigate the effect of in vitro aging on the flexural strength of yttrium-stabilized (Y-TZP) zirconia ceramics for ceramic restorations. METHODS: One hundred twenty bar-shaped specimens were prepared from two ceramics (ZENO Zr (WI) and IPS e.max(®) ZirCAD (IV)), and loaded until fracture according to ISO 6872. The specimens from each ceramic (nx=60) were divided in three groups (control, aged for 5h, aged for 10h). One-way ANOVA was used to assess statistically significant differences among flexural strength values (P<0.05). The variability of the flexural strength values was analyzed using the two-parameter Weibull distribution function, which was applied for the estimation of Weibull modulus (m) and characteristic strength (σ0). The crystalline phase polymorphs of the materials (tetragonal, t, and monoclinic, m, zirconia) were investigated by X-ray diffraction (XRD) analysis, Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy. RESULTS: A slight increase of the flexural strength after 5h, and a decrease after 10h of aging, was recorded for both ceramics, however statistically significant was for the WI group (P<0.05). Both ceramics presented a tâm phase transformation, with the m-phase increasing from 4 to 5% at 5h to around 15% after 10h. SIGNIFICANCE: The significant reduction of the flexural strength after 10h of in vitro aging, suggests high fracture probability for one of the zirconia ceramics tested.
Assuntos
Cerâmica/química , Materiais Dentários/química , Ítrio/química , Zircônio/química , Algoritmos , Cristalografia , Módulo de Elasticidade , Teste de Materiais , Maleabilidade , Probabilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral Raman , Estresse Mecânico , Propriedades de Superfície , Fatores de Tempo , Difração de Raios XRESUMO
OBJECTIVES: The temperature variations during the veneering firing cycles of a zirconia dental ceramic can negatively affect its mechanical properties. A possible synergistic effect of both heat-treatment and aging while exposed to the oral environment could result to catastrophic failure. The aim of the present study was to investigate the effect of heat treatment followed during veneering and in vitro aging on the mechanical and microstructural properties of zirconia dental ceramics. METHODS: Three specimens from each of two zirconia blocks (Ivoclar IPS e.max ZirCAD (IV) and Wieland ZENO Zr (WI)) were cut by CAD/CAM technology, fully sintered and polished. Each one was cut in four equal parts. One part was used as control (C), one was heat-treated (H), one was aged (A) (134°C, 2bar, 10h) and one was heat-treated and subsequently aged (HA). The mechanical properties (nano-hardness (H) and elastic modulus (E*)) were investigated by nano-indentation tests while the surface characterization was carried out with XRD, FTIR and SEM. RESULTS: Different treatments on IV and WI samples resulted in a reduction of both H and E* values, however the differences were not statistically significant (p>0.05). The combination of treatments imposes an overall effect (p<0.001), enhancing the influence on both H and E* values. This reduction in mechanical properties was followed by an increase of monoclinic content. Greater variations in both H and E* values were recorded for WI samples. SIGNIFICANCE: The clinical performance of zirconia dental ceramics may be affected during firing and aging resulting in increased probability of failure.
Assuntos
Cerâmica , Materiais Dentários , Restauração Dentária Permanente , Temperatura Alta , Teste de Materiais , Zircônio , Temperatura Baixa , Técnicas In Vitro , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Difração de Raios XRESUMO
OBJECTIVES: During hot melt extrusion (HME), phase changes and interactions due to thermo-mechanical stresses affect the drug incorporation into polymeric matrices. Two HME compositions of venlafaxine HCl with Eudragit RSPO (Evonic, Darmstadt, Germany) as the matrix polymer and either citric acid monohydrate (CAMH) or Lutrol F127 (BASF, Ludwigshafen, Germany) as plasticisers were compared. METHODS: Miscibility and extrusion temperatures were elucidated based on solubility parameters and differential scanning calorimetry. Thermal changes in the extruded melts and their respective physical mixtures were compared. Powder X-ray diffraction was applied to detect changes in crystallinity and fourier transform infrared (FT-IR) spectroscopy for chemical interactions. KEY FINDINGS: Both plasticisers (15%) enabled extrusion easily. With Lutrol, the drug remained crystalline, whereas with CAMH a single-phase amorphous transparent extrudate was obtained. Differences between the thermographs of extruded and physical mixtures indicated the importance of mechanical stresses in the single-screw extruder. In the FT-IR spectrum of Eudragit/CAMH/drug extrudate, the abscence of the peak due to venlafaxine OH and the merging of the two peaks due to CAMH carbonyl, into one, indicated esterification. CONCLUSIONS: CAMH and Lutrol have different reactivities towards venlafaxine HCl and also different plasticising mechanisms for Eudragit RSPO because of hydrogen bonding and because of similar overall molecular attractive forces, respectively.