Anodic instability of carbon in non-alkaline Zn-air batteries.

Although non-alkaline rechargeable Zn-air batteries (RZABs) are promising for energy storage, their chemistry is still underdeveloped and unclear. It was suggested that using Zn(OAc)2 or Zn(OTf)2 aqueous solutions as electrolytes enables reversible, corrosion-free charge-discharge processes, but the anodic stability of carbon in these cells has remained poorly studied. We report that CO2 evolution is manifested during the oxygen evolution reaction in non-alkaline RZABs, which is associated with the corrosion of carbon scaffolds. This corrosion is observed for different electrolyte compositions, such as Zn(OAc)2, ZnSO4 and Zn(OTf)2 solutions of various concentrations. The corrosion rate decreases when the overpotentials during the oxygen evolution reaction are lower. This study underlines the importance of addressing the anodic instability of carbon in non-alkaline RZABs.

Hydrogel-Inducing Graphene-Oxide-Derived Core-Shell Fiber Composite for Antibacterial Wound Dressing.

The study reveals the polymer-crosslinker interactions and functionality of hydrophilic nanofibers for antibacterial wound coatings. Coaxial electrospinning leverages a drug encapsulation protocol for a core-shell fiber composite with a core derived from polyvinyl alcohol and polyethylene glycol with amorphous silica (PVA-PEG-SiO2), and a shell originating from polyvinyl alcohol and graphene oxide (PVA-GO). Crosslinking with GO and SiO2 initiates the hydrogel transition for the fiber composite upon contact with moisture, which aims to optimize the drug release. The effect of hydrogel-inducing additives on the drug kinetics is evaluated in the case of chlorhexidine digluconate (CHX) encapsulation in the core of core-shell fiber composite PVA-PEG-SiO2-1x-CHX@PVA-GO. The release rate is assessed with the zero, first-order, Higuchi, and Korsmeyer-Peppas kinetic models, where the inclusion of crosslinking silica provides a longer degradation and release rate. CHX medicated core-shell composite provides sustainable antibacterial activity against Staphylococcus aureus.

The Impact of Backbone Fluorination and Side-Chain Position in Thiophene-Benzothiadiazole-Based Hole-Transport Materials on the Performance and Stability of Perovskite Solar Cells.

Perovskite solar cells (PSCs) currently reach high efficiencies, while their insufficient stability remains an obstacle to their technological commercialization. The introduction of hole-transport materials (HTMs) into the device structure is a key approach for enhancing the efficiency and stability of devices. However, currently, the influence of the HTM structure or properties on the characteristics and operational stability of PSCs remains insufficiently studied. Herein, we present four novel push-pull small molecules, H1-4, with alternating thiophene and benzothiadiazole or fluorine-loaded benzothiadiazole units, which contain branched and linear alkyl chains in the different positions of terminal thiophenes to evaluate the impact of HTM structure on PSC performance. It is demonstrated that minor changes in the structure of HTMs significantly influence their behavior in thin films. In particular, H3 organizes into highly ordered lamellar structures in thin films, which proves to be crucial in boosting the efficiency and stability of PSCs. The presented results shed light on the crucial role of the HTM structure and the morphology of films in the performance of PSCs.

Charge storage mechanisms of a π-d conjugated polymer for advanced alkali-ion battery anodes.

The demand for fast-charging metal-ion batteries underlines the importance of anodes that work at high currents with no risk of dendrite formation. NiBTA, a one-dimensional Ni-based polymer derived from benzenetetramine (BTA), is a recently proposed promising material for safe fast-charging batteries. However, its charge-discharge mechanisms remained unclear and controversial. Here we solve the controversies by providing the first rigorous study using a combination of advanced theoretical and experimental techniques, including operando and ex situ X-ray diffraction, operando Raman spectroscopy and ex situ X-ray absorption near-edge spectroscopy (XANES). In safe potential ranges (0.5-2.0 V vs. M+/M, M = Li, Na or K), NiBTA offers high capacities, fast charge-discharge kinetics, high cycling stability and compatibility with various cations (Li+, Na+, K+). In the Na- and K-based cells, fast bulk faradaic processes are manifested for partially reduced states. Atomistic simulations explain the fast kinetics by facile rotations and displacements of the macromolecules in the crystal, opening channels for fast ion insertion. The material undergoes distinct crystal structure rearrangements in the Li-, Na- and K-based systems, which explains different electrochemical features. At the molecular level, the charge storage mechanism involves reversible two-electron reduction of the repeating units accompanied by a change of the absorption bandgap. The reversible reduction involves filling of the orbitals localized at the ligand moieties. No reduction of NiBTA beyond two electrons per repeating unit is observed at potentials down to 0 V vs. M+/M.

2-Carboxyethylgermanium Sesquioxide as A Promising Anode Material for Li-Ion Batteries.

Various forms of germanium and germanium-containing compounds and materials are actively investigated as energy-intensive alternatives to graphite as the anode of lithium-ion batteries. The most accessible form-germanium dioxide-has the structure of a 3D polymer, which accounts for its rapid destruction during cycling, and requires the development of further approaches to the production of nanomaterials and various composites based on it. For the first time, we propose here the strategy of using 2-carboxyethylgermanium sesquioxide ([O1.5 GeCH2 CH2 CO2 H]n , 2-CEGS), in lieu of GeO2 , as a promising, energy-intensive, and stable new source system for building lithium-ion anodes. Due to the presence of the organic substituent, the formed polymer has a 1D or a 2D space organization, which facilitates the reversible penetration of lithium into its structure. 2-CEGS is common and commercially available, completely safe and non-toxic, insoluble in organic solvents (which is important for battery use) but soluble in water (which is convenient for manufacturing diverse materials from it). This paper reports the preparation of micro- (flower-shaped agglomerates of ≈1 µm thick plates) and nanoformed (needle-shaped nanoparticles of ≈500×(50-80) nm) 2-CEGS using methods commonly available in laboratories and industry such as vacuum and freeze-drying of aqueous solutions of 2-CEGS. Lithium half-cell anodes based on 2-CEGS show a capacity of ≈400 mAh g-1 for microforms and up to ≈700 mAh g-1 for nanoforms, which is almost two times higher than the maximal theoretical capacity of graphite. These anodes are stable during the cycling at various rates. The results of DFT simulations suggest that Li atoms form the stable Li2 O with the oxygen atoms of 2-CEGS, and actual charge-discharge cycles involve deoxygenated GeC3 H5 molecules. Thus, C3 chains loosen the anode structure compared to pure Ge, improving its ability to accommodate Li ions.

A nickel coordination polymer derived from 1,2,4,5-tetraaminobenzene for fast and stable potassium battery anodes.

We report the application of a Ni-based coordination polymer derived from 1,2,4,5-tetraaminobenzene (P1) as a fast and stable potassium battery anode. In a voltage range of 0.5-2.0 V vs. K+/K, a reversible capacity of 220 mA h g-1 was obtained at 0.1 A g-1. Even with a relatively high electrode loading of 5.0 mg cm-2 and only 10 wt% carbon additive, 118 mA h g-1 was still retained at 1 A g-1. For thinner electrodes with 30 wt% carbon, a capacity of up to 104 mA h g-1 was observed at 10 A g-1 (charging in ∼40 seconds). An areal capacity of up to 2.73 mA h cm-2 was demonstrated. The capacity fade at 1 A g-1 was only 4.4% after 200 cycles. Structure transformations of P1 during charge/discharge were studied using X-ray photoelectron spectroscopy and in situ X-ray diffraction.

Metal-ion batteries meet supercapacitors: high capacity and high rate capability rechargeable batteries with organic cathodes and a Na/K alloy anode.

In this study, a dendrite-free liquid sodium-potassium alloy (NaK) anode with high capacity, a low reduction potential and fast kinetics was paired with two organic polymer cathodes, poly(N-phenyl-5,10-dihydrophenazine) (P1) and poly(hexaazatrinaphthylene) (P2), in metal-ion batteries. A high energy density of 631 W h kg-1 was achieved for one of the polymers (P1) at a discharge current density of 0.2 A g-1 (∼1C rate), while a still impressive specific energy of 443 W h kg-1 was achieved at 20 A g-1 (∼160C rate), which is an unprecedented value for post-lithium battery cathodes. Outstanding power densities of >105 W kg-1 were demonstrated, thus boosting the rate capability of metal-ion batteries to the level of high-power supercapacitors. Moreover, excellent cyclability was demonstrated, with only 11% capacity loss after 10 000 charge/discharge cycles at 10 A g-1 for cathodes based on P2.

GRASS: semi-automated NMR-based structure elucidation of saccharides.

Motivation: Carbohydrates play crucial roles in various biochemical processes and are useful for developing drugs and vaccines. However, in case of carbohydrates, the primary structure elucidation is usually a sophisticated task. Therefore, they remain the least structurally characterized class of biomolecules, and it hampers the progress in glycochemistry and glycobiology. Creating a usable instrument designed to assist researchers in natural carbohydrate structure determination would advance glycochemistry in biomedical and pharmaceutical applications. Results: We present GRASS (Generation, Ranking and Assignment of Saccharide Structures), a novel method for semi-automated elucidation of carbohydrate and derivative structures which uses unassigned 13C NMR spectra and information obtained from chromatography, optical, chemical and other methods. This approach is based on new methods of carbohydrate NMR simulation recently reported as the most accurate. It combines a broad diversity of supported structural features, high accuracy and performance. Availability and implementation: GRASS is implemented in a free web tool available at http://csdb.glycoscience.ru/grass.html. Contact: kapaev_roman@mail.ru or netbox@toukach.ru. Supplementary information: Supplementary data are available at Bioinformatics online.

Simulation of 2D NMR Spectra of Carbohydrates Using GODESS Software.

Glycan Optimized Dual Empirical Spectrum Simulation (GODESS) is a web service, which has been recently shown to be one of the most accurate tools for simulation of (1)H and (13)C 1D NMR spectra of natural carbohydrates and their derivatives. The new version of GODESS supports visualization of the simulated (1)H and (13)C chemical shifts in the form of most 2D spin correlation spectra commonly used in carbohydrate research, such as (1)H-(1)H TOCSY, COSY/COSY-DQF/COSY-RCT, and (1)H-(13)C edHSQC, HSQC-COSY, HSQC-TOCSY, and HMBC. Peaks in the simulated 2D spectra are color-coded and labeled according to the signal assignment and can be exported in JCAMP-DX format. Peak widths are estimated empirically from the structural features. GODESS is available free of charge via the Internet at the platform of the Carbohydrate Structure Database project ( http://csdb.glycoscience.ru ).

Improved Carbohydrate Structure Generalization Scheme for (1)H and (13)C NMR Simulations.

The improved Carbohydrate Structure Generalization Scheme has been developed for the simulation of (13)C and (1)H NMR spectra of oligo- and polysaccharides and their derivatives, including those containing noncarbohydrate constituents found in natural glycans. Besides adding the (1)H NMR calculations, we improved the accuracy and performance of prediction and optimized the mathematical model of the precision estimation. This new approach outperformed other methods of chemical shift simulation, including database-driven, neural net-based, and purely empirical methods and quantum-mechanical calculations at high theory levels. It can process structures with rarely occurring and noncarbohydrate constituents unsupported by the other methods. The algorithm is transparent to users and allows tracking used reference NMR data to original publications. It was implemented in the Glycan-Optimized Dual Empirical Spectrum Simulation (GODESS) web service, which is freely available at the platform of the Carbohydrate Structure Database (CSDB) project ( http://csdb.glycoscience.ru).

Carbohydrate structure generalization scheme for database-driven simulation of experimental observables, such as NMR chemical shifts.

Carbohydrates play an immense role in different aspects of life. NMR spectroscopy is the most powerful tool for investigation of these compounds. Nowadays, progress in computational procedures has opened up novel opportunities giving an impulse to the development of new instruments intended to make the research simpler and more efficient. In this paper, we present a new approach for simulating (13)C NMR chemical shifts of carbohydrates. The approach is suitable for any atomic observables, which could be stored in a database. The method is based on sequential generalization of the chemical surroundings of the atom under prediction and heuristic averaging of database data. Unlike existing applications, the generalization scheme is tuned for carbohydrates, including those containing phosphates, amino acids, alditols, and other non-carbohydrate constituents. It was implemented in the Glycan-Optimized Dual Empirical Spectrum Simulation (GODESS) software, which is freely available on the Internet. In the field of carbohydrates, our approach was shown to outperform all other existing methods of NMR spectrum prediction (including quantum-mechanical calculations) in accuracy. Only this approach supports NMR spectrum simulation for a number of structural features in polymeric structures.