Luffa cylindrica (Sponge Gourd) Fibers in Treatment of Greywater: an Aerobic Fixed-Film Reactor Approach.

The need for potable water consumption in urban and suburban regions can be decreased by greywater treatment and its reuse. Utilizing natural fibers may provide sustainable solutions in addressing challenges related to water resource management. In this study, a fixed-film reactor was designed with Luffa cylindrica (an annually occurring fruit) as a bio-carrier. The lab-scale reactors were configured with and without Luffa cylindrica and were run for 90 days in fed-batch mode. Scanning electron microscopy (SEM) was performed to validate biofilm production over time. Monitoring COD, nitrogen, and total phosphate removal allowed for analysis of treatment effectiveness. Results demonstrated the treatment efficiency for the experimental reactor was 70.96%, 97.02%, 92.57%, and 81.20% for COD, nitrogen, phosphate, and anionic surfactant (AS), respectively. 16 s rRNA gene sequencing of bio-carrier and control greywater samples was carried out. Many bacteria known to break down anionic surfactants were observed, and microbial succession was witnessed in the control reactor vs. the experimental reactor samples. The three most prevalent genera in the experimental samples were Chlorobium, Chlorobaculum, and Terrimonas. However, it is crucial to underscore that additional research is essential to solidify our understanding in this domain, with this study laying the fundamental groundwork.

Treatment Options for Municipal Solid Waste by Composting and Its Challenges.

Recovery and recycling of municipal solid waste biodegradable fraction (50-55%) are essential for attaining sustainability and a circular economy. Among organic waste treatment methods, composting is used to recycle organic fractions of waste. However, only 10-12% of municipal solid waste is utilized for composting treatment due to a lack of segregation practices and process challenges, including long process periods, odorous and greenhouse gas emissions, nitrogen loss, and low compost quality, which hinders large-scale practice. The current review paper discusses the challenges of composting treatment and its possible solutions. Various strategies were explored to address these challenges, such as utilizing microbial inoculum, additives, and optimization of physicochemical parameters. It also emphasizes the application of metagenomics for exploring key species. The knowledge about the microbial community and biochemical pathways (genome mining) can be exploited for the improvement of treatment efficiency. Supplementary Information: The online version contains supplementary material available at 10.1007/s12088-023-01087-4.

Antibiotic resistance in wastewater: Indian scenario.

The surge of Antibiotic Resistant Bacteria (ARB) in the environment is poised to be the next health threat. World Health Organisation's (WHO's) Global Antimicrobial Surveillance System (GLASS) report indicates that developing countries may be at a greater risk. Among various factors, the major driver here could be untreated wastewater and poor sanitation. Bacteria are extremely adaptable to their surroundings and develop Antimicrobial Resistance (AMR) when exposed to antibiotics and other pollutants that cause microbial stress. Thus, untreated domestic wastewater drains could easily become hotspots for the occurrence of ARBs. This study reports surveillance of sewage-carrying drains across four urban cities in India and demonstrated the presence of ARBs in the bacterial community against 7 classes of antibiotics, namely, ß-Lactams, Chloramphenicol, Glycopeptides, Macrolides, Tetracycline, Third Generation Cephalosporin, and Quinolones. Untreated domestic wastewater flowing in target drains was collected twice a month, for a period of six months and the microbial community was subjected to Antibiotic Susceptibility Testing (AST) by plate assays. The zone of inhibition was recorded and interpreted as per the interpretive chart of The Clinical & Laboratory Standards Institute (CLSI) & The European Committee on Antimicrobial Susceptibility Testing (EUCAST). The total number of samples showing resistance against antibiotics was used to define an Antibiotic Resistance Index (ARI), calculated for all 20 sampling sites (drains). Results demonstrated that the highest ARI was observed in Delhi and Mumbai, ranging from 0.81 to 0.92 in Delhi and 0.49-0.56 in Mumbai. This surveillance study reveals the antibiotic resistance pattern of the representative bacterial community in the drains and goes beyond few targeted bacterial species. The alarming presence of antibiotic resistant bacterial community highlights the concern of ARBs being the next looming health threat. This report aims to demonstrates the importance of considering sewage surveillance on routine basis by state authorities.

Valorization of oily sludge waste using biosurfactant-producing bacteria.

Oily sludge generated by the petroleum industry is not only an environmental hazard, but since it contains crude oil too, it is a valuable resource as well. This study demonstrates a methodology for the valorization of the oily sludge that allows the recovery of oil fractions by the action of microbes producing surface-active metabolites. Two bacterial isolates were used in the study that were producing different biosurfactants, identified via FTIR analysis as well as through genomic mapping of the biosurfactant pathways using RAST, ANTISMASH 7.0, STRING databases. Serratia spp. AKBS12, produced a mono-rhamnolipid, while Acinetobacter spp. AKBS16, produced emulsan. Although recovery efficiency of both biosurfactants was similar, the recovery profile with respect to the class of hydrocarbons differed. The rhamnolipid produced by Serratia spp. AKBS12 extracted mono-chained paraffins and linear alkanes, while emulsan, produced by Acinetobacter spp. AKBS16 could extract heavier paraffins. The extraction procedure is simple and involves mixing the biosurfactant with oily sludge at a temperature of 30 °C with an incubation of 9 days. Sulphuric acid precipitation releases the oil trapped in the oily sludge. The study is the first step in developing user-friendly, innovative technologies that can be linked to the concept of a circular economy.

Designing Knowledge-Based Bioremediation Strategies Using Metagenomics.

Functional capacities for bioremediation are governed by metabolic mechanisms of inhabiting microbial communities at polluted niches. Process fluctuations lead to stress scenarios where microbes evolve continuously to adapt to sustain the harsh conditions. The biological wastewater treatment (WWT) process harbors the potential of these catabolic microbes for the degradation of organic molecules. In a typical biological WWT or soil bioremediation process, several microbial species coexist which code for enzymes that degrade complex compounds.High throughput DNA sequencing techniques for microbiome analysis in bioremediation processes have led to a powerful paradigm revealing the significance of metabolic functions and microbial diversity. The present chapter describes techniques in taxonomy and functional gene analysis for understanding bioremediation potential and novel strategies built on in silico analysis for the improvisation of existing aerobic wastewater treatment methods. Methods explaining comparative metagenomics by Metagenome Analysis server (MG-RAST) are described with successful case studies by focusing on industrial wastewaters and soil bioremediation studies.

Comparative assessment of soil microbial community in crude oil contaminated sites.

Petroleum refineries generate oily sludge that contains hazardous polycyclic aromatic hydrocarbons (PAH), and hence, its proper disposal is of foremost concern. Analysis of the physicochemical properties and functions of indigenous microbes of the contaminated sites are essential in deciding the strategy for bioremediation. This study analyses both parameters at two geographically distant sites, with different crude oil sources, and compares the metabolic capability of soil bacteria with reference to different contamination sources and the age of the contaminated site. The results indicate that organic carbon and total nitrogen derived from petroleum hydrocarbon negatively affect microbial diversity. Contamination levels vary widely on site, with levels of PAHs ranging from 5.04 to 1.66 × 103 µg kg-1 and 6.20 to 5.64 × 103 µg kg-1 in Assam and Gujarat sites respectively, covering a higher proportion of low molecular weight (LMW) PAHs (fluorene, phenanthrene, pyrene, and anthracene). Functional diversity values were observed to be positively correlated (p < 0.05) with acenaphthylene, fluorene, anthracene, and phenanthrene. Microbial diversity was the highest in fresh oily sludge which decreased upon storage, indicating that immediate bioremediation, soon after its generation, would be beneficial. Improvement in the bio-accessibility of hydrocarbon compounds by the treatment of biosurfactant produced by a (soil isolate/isolate) was demonstrated., with respect to substrate utilization.

Catalytic resilience of multicomponent aromatic ring-hydroxylating dioxygenases in Pseudomonas for degradation of polycyclic aromatic hydrocarbons.

Hydrophobic organic compounds, either natural or introduced through anthropogenic activities, pose a serious threat to all spheres of life, including humankind. These hydrophobic compounds are recalcitrant and difficult to degrade by the microbial system; however, microbes have also evolved their metabolic and degradative potential. Pseudomonas species have been reported to have a multipotential role in the biodegradation of aromatic hydrocarbons through aromatic ring-hydroxylating dioxygenases (ARHDs). The structural complexity of different hydrophobic substrates and their chemically inert nature demands the explicit role of evolutionary conserved multicomponent enzyme ARHDs. These enzymes catalyze ring activation and subsequent oxidation by adding two molecular oxygen atoms onto the vicinal carbon of the aromatic nucleus. This critical metabolic step in the aerobic mode of degradation of polycyclic aromatic hydrocarbons (PAHs) catalyzed by ARHDs can also be explored through protein molecular docking studies. Protein data analysis enables an understanding of molecular processes and monitoring complex biodegradation reactions. This review summarizes the molecular characterization of five ARHDs from Pseudomonas species already reported for PAH degradation. Homology modeling for the amino acid sequences encoding the catalytic α-subunit of ARHDs and their docking analyses with PAHs suggested that the enzyme active sites show flexibility around the catalytic pocket for binding of low molecular weight (LMW) and high molecular weight (HMW) PAH substrates (naphthalene, phenanthrene, pyrene, benzo[α]pyrene). The alpha subunit harbours variable catalytic pockets and broader channels, allowing relaxed enzyme specificity toward PAHs. ARHD's ability to accommodate different LMW and HMW PAHs demonstrates its 'plasticity', meeting the catabolic demand of the PAH degraders.

Biosurfactants as microbial bioactive compounds in microbial enhanced oil recovery.

Fossil fuels such as petroleum resources continue to be a significant fraction of the energy portfolio. Oil sludge or slops have become an unavoidable waste in the petroleum industries, and their improper disposal measures have led to environmental pollution. Various conventional and traditional practices for disposal and recovery are practiced, but the efficiency of MEOR has led to more promising and efficient ways to recover oil from oil reservoirs and waste sludges. Among the microbial bioactives, biosurfactants are the key players in the whole process. Although, MEOR using biosurfactants has been largely practiced for recovering oil from oil reservoirs, microbial metabolites are also proving to be effective in recovering oil from the waste oily sludges generated as a part of the petroleum production cycle. MEOR stands out as a economically sound alternative over other conventional methods that require large capital investment, heavy energy consumption and varying recovery efficiency. This review describes the scope of MEOR to be useful in reducing and reusing the waste oily sludge accumulation that when untreated causes environmental pollution, allowing sustainable use of natural resources. However, lack of reproducibility at field scale, large scale production of bioactive compounds are the major reasons leading to its incompatibility. The review aims to address the gaps and possible strategies to help speed up the efficiency by thoroughly focusing on the biosurfactant mediated MEOR process dynamics and use of various non-renewable substrates as measure of waste utilization for the production of metabolites. The molecular makeup of these significant molecules after extracting them from the contaminated niche will help discover microbial diversity. Furthermore, the limitations to this biosurfactant assisted MEOR can be solved by using genomic and high throughput approaches to execute an economical implementation at field scale level.

Genome plasticity as a paradigm of antibiotic resistance spread in ESKAPE pathogens.

The major reason behind the spread of antibiotic resistance genes (ARGs) is persistent selective pressure in the environment encountered by bacteria. Genome plasticity plays a crucial role in dissemination of antibiotic resistance among bacterial pathogens. Mobile genetic elements harboring ARGs are reported to dodge bacterial immune system and mediate horizontal gene transfer (HGT) under selective pressure. Residual antibiotic pollutants develop selective pressures that force the bacteria to lose their defense mechanisms (CRISPR-cas) and acquire resistance. The present study targets the ESKAPE organisms (namely, Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter spp.) causing various nosocomial infections and emerging multidrug-resistant species. The role of CRISPR-cas systems in inhibition of HGT in prokaryotes and its loss due to presence of various stressors in the environment is also focused in the study. IncF and IncH plasmids were identified in all strains of E. faecalis and K. pneumoniae, carrying Beta-lactam and fluoroquinolone resistance genes, whereas sal3, phiCTX, and SEN34 prophages harbored aminoglycoside resistance genes (aadA, aac). Various MGEs present in selected environmental niches that aid the bacterial genome plasticity and transfer of ARGs contributing to its spread are also identified.

Characterization of a potent biosurfactant produced from Franconibacter sp. IITDAS19 and its application in enhanced oil recovery.

Biosurfactants are surface-active molecules produced from microorganisms either on the cell surface or secreted extracellularly. Several biosurfactant producing microorganisms have been isolated to date, but they differ in their efficacy towards different types of hydrocarbons. Here, we report the isolation and characterization of a biosurfactant producing bacterium Franconibacter sp. IITDAS19 from crude oil contaminated soil. The biosurfactant was isolated, purified and characterized. It was identified as a glycolipid. It was found to be very stable at wide range of temperatures, pH and salt concentrations. It could reduce the surface tension of the water from 71 mN/m to 31 mN/m. IITDAS19 showed very high efficacy towards both aliphatic and aromatic hydrocarbons. It resulted in about 63% recovery of residual oil in a sand pack column. Our results suggested that the produced biosurfactant can be used for enhanced oil recovery. To our knowledge, this is the first report demonstrating the detailed characterization of a biosurfactant from Franconibacter spp.

Multifunctional applications of bamboo crop beyond environmental management: an Indian prospective.

Increasing population, industrialization, and economic growth cause several adverse impacts on the existing environment and living being. Therefore, rising pollutants load and their mitigation strategies, as well as achieving energy requirements while reducing reliance on fossil fuels are the key areas, which needs significant consideration for sustainable environment. Since India has considerable biomass resources, bioenergy is a significant part of the country's energy policy. However, the selection of feedstock is a crucial step in bioenergy production that could produce raw material without compromising food reserve along with the sustainable environment. Higher growth capacity of bamboo species makes them a suitable lignocellulosic substrate for the production of high-value greener products such as fuels, chemicals, and biomaterials as well as an appropriate candidate for eco-restoration of degraded land. In that context, the current review discusses the multidimensional applications of bamboo species in India. The bioenergy potency of bamboo and probability of aligning its production, cultivation, and operation with economic and social development agendas are also addressed, making it an exceptional crop in India. Additionally, its fast growth, perennial root systems, and capability to restore degraded land make it an essential part of ecological restoration. Furthermore, this review explores additional benefits of bamboo plantation on the environment, economy, and society along with future research prospects.

Biotechnological potential of rumen microbiota for sustainable bioconversion of lignocellulosic waste to biofuels and value-added products.

Lignocellulosic biomass is an abundant resource with untapped potential for biofuel, enzymes, and chemical production. Its complex recalcitrant structure obstructs its bioconversion into biofuels and other value-added products. For improving its bioconversion efficiency, it is important to deconstruct its complex structure. In natural systems like rumen, diverse microbial communities carry out hydrolysis, acidogenesis, acetogenesis, and methanogenesis of lignocellulosic biomass through physical penetration, synergistic and enzymatic actions enhancing lignocellulose degradation activity. This review article aims to discuss comprehensively the rumen microbial ecosystem, their interactions, enzyme production, and applications for efficient bioconversion of lignocellulosic waste to biofuels. Furthermore, meta 'omics' approaches to elucidate the structure and functions of rumen microorganisms, fermentation mechanisms, microbe-microbe interactions, and host-microbe interactions have been discussed thoroughly. Additionally, feed additives' role in improving ruminal fermentation efficiency and reducing environmental nitrogen losses has been discussed. Finally, the current status of rumen microbiota applications and future perspectives for the development of rumen mimic bioreactors for efficient bioconversion of lignocellulosic wastes to biofuels and chemicals have been highlighted.

Impact of cyanobacterial bloom on microbiomes of freshwater lakes.

Cyanobacterial blooms are harmful because of their cyanotoxins production. It occurs due to the eutrophication of freshwater reserves. Nagpur city has three lakes which serves as public water resource and are affected by algal bloom events. Metagenomic approach was used for the exploration of taxonomic, catabolic, and resistome profile of these lakes. Taxonomic profiling indicated prevalence of cyanobacterial species like Microcystis, Anabaena, Trichodesmium, Microcoleus, and Nodularia. These bacteria are well known for their association with algal bloom and microcystin production. High Performance Liquid Chromatography (HPLC) detected the presence of microcystin toxin and concentration was relatively higher in Ambazari lakewater. In addition, the presence of several antibiotic resistance genes like vancomycin, beta-lactamase, methicillin, and fluoroquinolones were observed. Genes conferring metal resistance such as copper, cadmium, zinc were also mined indicating presence of metal resistant microorganisms. The study suggests that lake water contaminated with Microcystis (algal bloom) harbors complex microbial community having diverse catabolic and resistome profiles, which negatively affect the ecosystems services.

Multidimensional approaches of biogas production and up-gradation: Opportunities and challenges.

The expanding interest towards biogas generation from biowaste via complex anaerobic digestion (AD) opened new avenues in the improvement of biogas production processes and their up-gradation. The adsorption/removal of impurities particularly hydrogen sulfide (H2S) and carbon dioxide (CO2) from the biogas stream will significantly improve the efficiency of biogas for its further use as a renewable energy fuel. The production and up-gradation of biogas rely upon the types of feedstocks, AD condition, microbial diversity, purification methods along with the application of various additives. In that context, this review aims to emphasize the current state of the art in the field of biogas production via AD using diverse bio-waste. Further, this review will critically explore the biogas up-gradation technologies adopted so far and their pros and cons. Finally, techno-economic and environmental impact assessment of the biogas production process will be underlined to make the process cost-effective and environmentally sustainable.

Monitoring the growth, survival and phenol utilization of the fluorescent-tagged Pseudomonas oleovorans immobilized and free cells.

Bioaugmentation in wastewater treatment plants (WWTPs) is challenging due to low survival and persistence of applied microbes. This study aimed to track the capacity and survival of fluorescent-tagged Pseudomonas oleovoransICTN13 as a model organism applicable in bioaugmentation of phenol-containing wastewater. The isolate was immobilized in alginate biopolymer, and enhanced efficacy and survival for biodegradation of phenol against free cells were studied. Encapsulated cells resulted in enhanced phenol removal efficiency (~94%) compared to free cells (~72%). Encapsulation of cells facilitated an extended storage time of 30 days. Remarkably, phenol and COD removal efficacy of encapsulated cells was sustained up to ~ 92-93% in a reactor after 45 days, while free cells could produce ~ 80-84% removal efficiency. Fluorescence microscopy showed high survival of the encapsulated cells, whereas gradual deterioration of free cells was observed. Thus, the findings highlight the importance of bio augmented strain in WWTPs where encapsulation is a crucial factor.

Integrated Genomic and Functional Characterization of the Anti-diabetic Potential of Arthrobacter sp. SW1.

For decades, bacterial natural products have served as valuable resources for developing novel drugs to treat several human diseases. Recent advancements in the integrative approach of using genomic and functional tools have proved beneficial in obtaining a comprehensive understanding of these biomolecules. This study presents an in-depth characterization of the anti-diabetic activity exhibited by a bacterial isolate SW1, isolated from an effluent treatment plant. As a primary screening, we assessed the isolate for its potential to inhibit alpha-amylase and alpha-glucosidase enzymes. Upon confirmation, we further utilized LC-MS, ESI-MS/MS, and NMR spectroscopy to identify and characterize the biomolecule. These efforts were coupled with the genomic assessment of the biosynthetic gene cluster involved in the anti-diabetic compound production. Our investigation discovered that the isolate SW1 inhibited both α-amylase and α-glucosidase activity. The chemical analysis suggested the production of acarbose, an anti-diabetic biomolecule, which was further confirmed by the presence of biosynthetic gene cluster "acb" in the genome. Our in-depth chemical characterization and genome mining approach revealed the potential of bacteria from an unconventional niche, an effluent treatment plant. To the best of our knowledge, it is one of the first few reports of acarbose production from the genus Arthrobacter.

Association of DNA repair gene XPC Ala499Val (rs2228000 C>T) and Lys939Gln (rs2228001 A>C) polymorphisms with the risk of chronic myeloid leukemia: A case-control study in a South Indian population.

BACKGROUND: Xeroderma pigmentosum complementation group C (XPC), a DNA repair protein, plays an important role in the maintenance of genomic integrity and is essential for the nucleotide excision repair pathway. Polymorphisms in the XPC gene may alter DNA repair leading to genetic instability and oncogenesis. The present study aimed to assess the relationship between the XPC Ala499Val (rs2228000 C>T) and Lys939Gln (rs2228001 A>C) non-synonymous polymorphisms and susceptibility to chronic myeloid leukemia (CML) pathogenesis, disease progression and the response to targeted therapeutic regimen, imatinib mesylate. METHODS: This case-control study included 212 cases and 212 controls, and the genotypes were determined by polymerase chain reaction-restriction fragment length polymorphism assays. RESULTS: Our results showed significant association of variant CT (odds ratio = 1.92, 95% confidence interval = 1.21-3.06, p = 0.003) and TT (odds ratio = 2.84, 95% confidence interval = 1.22-6.71, p = 0.007) genotypes in patients with the XPC Ala499Val polymorphism and CML risk. In addition, these genotypes were associated with CML progression to advanced phases (p = 0.006), splenomegaly (p = 0.017) and abnormal lactate dehydrogenase levels (p = 0.03). XPC Lys939Gln was found to correlate with a poor response to therapy, showing borderline significant association with minor cytogenetic response (p = 0.08) and a poor molecular response (p = 0.06). Significant association of the Ala499Val and Lys939Gln polymorphisms with prognosis was observed (Hasford high risk, p = 0.031 and p = 0.019, respectively). Haplotype analysis showed a strong correlation of variant TC haplotype with poor therapy responses (minor cytogenetic response, p = 0.019; poor molecular response, p < 0.0001). CONCLUSIONS: In conclusion, our results suggest that XPC Ala499Val is a high-penetrance CML susceptibility polymorphism. Both polymorphisms studied are considered as genetic markers with respect to assessing disease progression, therapy response and prognosis in CML patients.

Antibiotic resistance: Global health crisis and metagenomics.

Antibiotic resistance is a global problem which affects human health. The imprudent use of antibiotics (medicine, agriculture, aquaculture, and food industry) has resulted in the broader dissemination of resistance. Urban wastewater & sewage treatment plants act as the hotspot for the widespread of antimicrobial resistance. Natural environment also plays an important role in the dissemination of resistance. Mapping of antibiotic resistance genes (ARGS) in environment is essential for mitigating antimicrobial resistance (AMR) widespread. Therefore, the review article emphasizes on the application of metagenomics for the surveillance of antimicrobial resistance. Metagenomics is the next generation tool which is being used for cataloging the resistome of diverse environments. We summarize the different metagenomic tools that can be used for mining of ARGs and acquired AMR present in the metagenomic data. Also, we recommend application of targeted sequencing/ capture platform for mapping of resistome with higher specificity and selectivity.

Challenges and Control Strategies of Odor Emission from Composting Operation.

Composting is a biological decomposition process that occurs from microbial progression, which brings about the degradation and stabilization of various organic waste into compost. During composting, the emission of undesirable odor adversely affects compost quality and causes environmental deterioration. Also, odor emission from composting adversely affects human health and well-being. Ammonia (NH3), volatile organic compounds (VOCs), and hydrogen sulfide (H2S) are major components of odorous gases responsible for unpleasant odor. Physiological parameters such as pH, temperature, and aeration affect the pattern of odor emission during the composting process. The lack of techniques for the accurate identification and estimation of odor and control are some major challenges associated with composting. Therefore, the present review article concentrates on challenges and solutions to odor control. Biotrickling filter, optimization of process parameters, usage of additives, microbial inoculation, and pre-treatment techniques are practiced to lower odor emission during the process. The application of metagenomics may provide insight into the various biogeochemical pathways that can be explored in the future for odor control.