Harvesting the photoexcited holes on a photocatalytic proton reduction metal-organic framework.

The highly porous titanium based metal-organic framework NH2-MIL-125(Ti) has recently attracted significant attention in the field of photocatalysis as a promising material for H+ reduction. This work reveals charge transfer upon visible light illumination from this MOF to two different charge acceptors, as an alternative to sacrificial electron donors. Charge transfer is demonstrated through a combined spectroscopic study between this MOF and: (1) 2-(1H-pyrazol-3-yl)phenol, a molecule that functionally mimics the tyrosine-histidine pair, responsible for shuttling the holes to the oxygen evolving centre in natural photosynthesis, and (2) TEMPO, a well known and stable radical. Charge transfer of the holes from the MOF to these occluded molecules takes place on the picosecond time scale. This work suggests that, by coupling a stable and recyclable charge acceptor to the photogenerated holes, the charges can be utilised for oxidation reactions and, thus, link the reduction to the oxidation reactions in water splitting.

Metal-organic and covalent organic frameworks as single-site catalysts.

Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions.

Evidence for a chemical clock in oscillatory formation of UiO-66.

Chemical clocks are often used as exciting classroom experiments, where an induction time is followed by rapidly changing colours that expose oscillating concentration patterns. This type of reaction belongs to a class of nonlinear chemical kinetics also linked to chaos, wave propagation and Turing patterns. Despite its vastness in occurrence and applicability, the clock reaction is only well understood for liquid-state processes. Here we report a chemical clock reaction, in which a solidifying entity, metal-organic framework UiO-66, displays oscillations in crystal dimension and number, as shown by X-ray scattering. In rationalizing this result, we introduce a computational approach, the metal-organic molecular orbital methodology, to pinpoint interaction between the tectonic building blocks that construct the metal-organic framework material. In this way, we show that hydrochloric acid plays the role of autocatalyst, bridging separate processes of condensation and crystallization.

Adsorption of CO2 on MIL-53(Al): FTIR evidence of the formation of dimeric CO2 species.

FTIR spectra of (12)CO2 and (12)CO2 + (13)CO2 mixtures adsorbed on MIL-53(Al) reveal the formation of highly symmetric dimeric (CO2)2 species connected to two structural OH groups.

Metal organic framework synthesis in the presence of surfactants: towards hierarchical MOFs?

The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfactant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower temperatures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H2O and EtOH with a H2O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non-ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology.

Efficient production of hydrogen from formic acid using a covalent triazine framework supported molecular catalyst.

A heterogeneous molecular catalyst based on Ir(III) Cp* (Cp*=pentamethylcyclopentadienyl) attached to a covalent triazine framework (CTF) is reported. It catalyses the production of hydrogen from formic acid with initial turnover frequencies (TOFs) up to 27,000 h(-1) and turnover numbers (TONs) of more than one million in continuous operation. The CTF support, with a Brunauer-Emmett-Teller (BET) surface area of 1800 m(2) g(-1), was constructed from an optimal 2:1 ratio of biphenyl and pyridine carbonitrile building blocks. Biphenyl building blocks induce mesoporosity and, therefore, facilitate diffusion of reactants and products whereas free pyridinic sites activate formic acid towards ß-hydride elimination at the metal, rendering unprecedented rates in hydrogen production. The catalyst is air stable, produces CO-free hydrogen, and is fully recyclable. Hydrogen production rates of more than 60 mol L(-1) h(-1) were obtained at high catalyst loadings of 16 wt % Ir, making it attractive towards process intensification.

Molecular simulation of gas adsorption and diffusion in a breathing MOF using a rigid force field.

Simulation of gas adsorption in flexible porous materials is still limited by the slow progress in the development of flexible force fields. Moreover, the high computational cost of such flexible force fields may be a drawback even when they are fully developed. In this work, molecular simulations of gas adsorption and diffusion of carbon dioxide and methane in NH2-MIL-53(Al) are carried out using a linear combination of two crystallographic structures with rigid force fields. Once the interactions of carbon dioxide molecules and the bridging hydroxyls groups of the framework are optimized, an excellent match is found for simulations and experimental data for the adsorption of methane and carbon dioxide, including the stepwise uptake due to the breathing effect. In addition, diffusivities of pure components are calculated. The pore expansion by the breathing effect influences the self-diffusion mechanism and much higher diffusivities are observed at relatively high adsorbate loadings. This work demonstrates that using a rigid force field combined with a minimum number of experiments, reproduces adsorption and simulates diffusion of carbon dioxide and methane in the flexible metal-organic framework NH2-MIL-53(Al).

Hydrogel coated monoliths for enzymatic hydrolysis of penicillin G.

The objective of this work was to develop a hydrogel-coated monolith for the entrapment of penicillin G acylase (E. coli, PGA). After screening of different hydrogels, chitosan was chosen as the carrier material for the preparation of monolithic biocatalysts. This protocol leads to active immobilized biocatalysts for the enzymatic hydrolysis of penicillin G (PenG). The monolithic biocatalyst was tested in a monolith loop reactor (MLR) and compared with conventional reactor systems using free PGA, and a commercially available immobilized PGA. The optimal immobilization protocol was found to be 5 g l(-1) PGA, 1% chitosan, 1.1% glutaraldehyde and pH 7. Final PGA loading on glass plates was 29 mg ml(-1) gel. For 400 cpsi monoliths, the final PGA loading on functionalized monoliths was 36 mg ml(-1) gel. The observed volumetric reaction rate in the MLR was 0.79 mol s(-1) m(-3) (monolith). Apart from an initial drop in activity due to wash out of PGA at higher ionic strength, no decrease in activity was observed after five subsequent activity test runs. The storage stability of the biocatalysts is at least a month without loss of activity. Although the monolithic biocatalyst as used in the MLR is still outperformed by the current industrial catalyst (immobilized preparation of PGA, 4.5 mol s(-1) m(-3) (catalyst)), the rate per gel volume is slightly higher for monolithic catalysts. Good activity and improved mechanical strength make the monolithic bioreactor an interesting alternative that deserves further investigation for this application. Although moderate internal diffusion limitations have been observed inside the gel beads and in the gel layer on the monolith channel, this is not the main reason for the large differences in reactor performance that were observed. The pH drop over the reactor as a result of the chosen method for pH control results in a decreased performance of both the MLR and the packed bed reactor compared to the batch system. A different reactor configuration including an optimal pH profile is required to increase the reactor performance. The monolithic stirrer reactor would be an interesting alternative to improve the performance of the monolith-PGA combination.

Potential application of monolith packed columns as bioreactors, control of biofilm formation.

Monolith reactors combine good mass transfer characteristics with low-pressure drop, the principle factors affecting the cost effectiveness of industrial processes. Recently, these specific features of the monolith reactors have drawn the attention toward the application of the monolith reactor in multiphase reaction systems. In this study, we explore the potential application of monolith reactors as bioreactor requiring gas-liquid mass transfer for substrate supply. It is demonstrated on theoretical grounds that the monolith reactor is a competitive alternative to conventional gas-liquid bioreactors such as stirred tanks, packed beds, and airlift bioreactors because it allows for a significant reduction of the energy dissipation that is normally required for gas-liquid contacting. A potential problem of monolith reactors for biological processes is clogging due to biofilm formation. This paper presents experimental results of a study into the formation and possible removal of biofilms during operation of a monolith reactor as suspended cells bioreactor. The results indicate that biofilm formation may be minimized and postponed by a proper choice of operating conditions. Periodic biofilm removal could straightforwardly be achieved by rinsing with water at moderate pressures and allows for stable operation for prolonged periods of time.

One-pot catalyst preparation: combined detemplating and Fe ion-exchange of BEA through Fenton's chemistry.

BEA zeolite has been simultaneously detemplated and Fe-exchanged by treating the parent zeolite with a Fenton's-type reagent (Fe3+-H2O2) at low temperature. This one-pot process simplifies and speeds up considerably the preparation route. The catalyst shows excellent performance on N2O decomposition compared to conventionally prepared Fe-BEA.

Ion exchanged Fe-FER through H2O2-assisted decomplexation of organic salts.

Decomplexation of organic ligands through redox titration has been applied to catalyst synthesis, developing an improved preparation method for Fe-ferrierite (Fe-FER), the catalyst showing excellent performance and durability for N2O decomposition under realistic conditions for nitric acid plants.

Breakthrough of shallow activated carbon beds under constant and pulsating flow.

During actual use of a gas mask canister the flow through the activated carbon bed is pulsating. Pulsating flows were found to be less favorable for the breakthrough behavior compared to a constant flow pattern. The present article demonstrates this difference and clarifies how and why the breakthrough time depends on the airflow pattern. Furthermore, it shows the importance of good estimates of both diffusion parameters and mass transfer coefficients to obtain accurate predictions of the initial part of the breakthrough curve. Breakthrough measurements applying continuous and pulsating flows were performed using toluene on shallow activated carbon beds; toluene is a good representative for the type of vapors for which activated carbon forms a suitable adsorbent. Pulsating flow was studied by using the positive halves of a sinusoidal flow pattern, which closely resembles the actual breathing pattern. A two-dimensional mathematical model was used to describe the dynamic behavior. The agreement between measured and simulated breakthrough curves was good for both the constant and pulsating flow experiments. The difference in time between simulation and experiment was 10% at most. The influence of pulsating flow on the breakthrough behavior is well accounted for by the model. The influence of flow rate on the mass transfer from the bulk gas phase to the surface of the adsorbent particles is ultimately responsible for the difference in breakthrough times. Testing under pulsating flow allows for a more realistic assessment of the performance of cartridges and canisters.

In-target production of high specific radioactivity [15O]nitrous oxide by deuteron irradiation of nitrogen gas.

A simple and rapid production method for high specific radioactivity [15O]N2O has been developed based on the 14N(d,n)15O reaction on high-purity nitrogen gas in a flow-through target irradiated with a 0.5 microA beam of 7 MeV deuterons. The [15O]N2O formed during irradiation is selectively concentrated from the target effluent by adsorption on a zeolite during 150 s and subsequently released by rapid heating into a pulse with a full width at half maximum of 3.5 s. The radioactivity and specific radioactivity in the pulse amount to 4 MBq [15O]N2O and 4.5 x 10(13) Bq/mol respectively with a radiochemical purity >99.95%. A tenfold higher specific radioactivity may be feasible at larger beam currents. It was shown that stable N2O was also formed during irradiation. Based on responses to variations in various parameters during irradiation and on analyses performed on the products, an explanation is given on the mechanisms of in-target [15O]N2O and N2O formation, involving reaction of a particular excited state of O3 with N2.