Self-assembled materials from cellulose nanocrystals conjugated with a thermotropic liquid crystalline moiety.

Manipulating molecular and supramolecular interactions within cellulose nanocrystals (CNCs) to introduce different levels of assemblies combined with multiple functionalities is required for the development of degradable smart materials from renewable resources. To attain hierarchical structures and stimuli-responsive properties, a new class of liquid crystalline cellulosic hybrid materials is synthesized. Herein, main-chain rigid-rod-like oxidized cellulose (CNC-COOH) is prepared from a Cellulose Whatman filter paper (Cellulose W.P.) by acid hydrolysis and oxidized using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO). Thermotropic LC molecule, 4-cyano-4'-hydroxybiphenyl with a 12-methylene spacer (CB12-OH) is grafted onto the carboxylic acid group of CNC-COOH via Steglich esterification. The liquid crystalline functionalized CNCs cellulose nanocrystals (CNC-COO-CB12) are readily soluble in DMSO and ionic liquids. The extent of functionalization and structure of CNC-COO-CB12 are confirmed by solution-state 1H NMR and supported by other characterization techniques. We investigate the interplay of liquid crystalline orientational order of CNCs and cyanobiphenyl (CB12), and the supramolecular hydrogen bonding of CNCs within CNC-COO-CB12 and compare it with CNC-COOH. The introduction of thermotropic CB12 side chains onto rigid-rod CNCs shows the exclusive formation of smectic mesophases from the assemblies of CB12 with the absence of the cholesteric mesophase typically observed from CNC-COOH as verified by temperature-controlled SAXS (T-SAXS). This is further verified by UV-visible and SEM studies that show CNC-COO-CB12 forms smectic domains while CNC-COOH forms a visible light reflecting cholesteric mesophase in dried films. Thus, the interplay of liquid crystalline order of CNCs and CB12 and supramolecular hydrogen bonding of CNCs results in ordered, smectic-mesostructured CNCs for use in stimuli-responsive functional materials.

Dynamic magnetic field alignment and polarized emission of semiconductor nanoplatelets in a liquid crystal polymer.

Reconfigurable arrays of 2D nanomaterials are essential for the realization of switchable and intelligent material systems. Using liquid crystals (LCs) as a medium represents a promising approach, in principle, to enable such control. In practice, however, this approach is hampered by the difficulty of achieving stable dispersions of nanomaterials. Here, we report on good dispersions of pristine CdSe nanoplatelets (NPLs) in LCs, and reversible, rapid control of their alignment and associated anisotropic photoluminescence, using a magnetic field. We reveal that dispersion stability is greatly enhanced using polymeric, rather than small molecule, LCs and is considerably greater in the smectic phases of the resulting systems relative to the nematic phases. Aligned composites exhibit highly polarized emission that is readily manipulated by field-realignment. Such dynamic alignment of optically-active 2D nanomaterials may enable the development of programmable materials for photonic applications and the methodology can guide designs for anisotropic nanomaterial composites for a broad set of related nanomaterials.

Fast Photoswitchable Order-Disorder Transitions in Liquid-Crystalline Block Co-oligomers.

Optically driven ordering transitions are rarely observed in macromolecular systems, often because of kinetic limitations. Here, we report a series of block co-oligomers (BCOs) that rapidly order and disorder at room temperature in response to optical illumination, and the absence thereof. The system is a triblock where rigid azobenzene (Azo) mesogens are attached to each end of a flexible siloxane chain. UV-induced trans-to-cis Azo isomerization, and vice versa in the absence of UV light, drive disordering and ordering of lamellar superstructures and smectic mesophases, as manifested by liquefaction and solidification of the material, respectively. The impacts of chemical structure on BCO self-assembly and photoswitching kinetics are explored by in situ microscopy and X-ray measurements for different mesogen end groups (NO2 or CN), and different carbon chain lengths (0C or 12C) between the siloxane and the mesogen. The presence of the 12C spacer leads to hierarchical ordering with smectic layers of mesogens existing alongside larger length-scale lamellae, versus only smectic ordering without the spacer. These hierarchically ordered BCOs display highly persistent lamellar sheets that contrast with the tortuous, low-persistence "fingerprint"-type structures seen in conventional block copolymers. The reordering kinetics upon removal of UV illumination are extremely rapid (<5 s). This fast response is due to the electron-withdrawing NO2 and CN, which facilitate cis-to-trans isomerization via thermal relaxation at room temperature without additional stimuli. This work elucidates structure-property relationships in photoswitching BCOs and advances the possibility of developing systems in which ordered nanostructures can be easily optically written and erased.

Rhodamine-Installed Polynorbornenes: Molecular Design, Structure, and Stimuli-Responsive Properties.

The synthesis of a number of tailored architectures of rhodamine dye-norbornene conjugate monomers and corresponding homopolymers derived from them is described. The impact of the monomer architecture on the mechanochromic, photochromic, and thermochromic properties of rhodamine-modified polynorbornenes is reported. Color changes were caused by the reversible interconversion between the "open" and "closed" spirolactam form of the covalently attached dye. Monomers were synthesized in two principle architectures that varied on: (1) the number of polymerizable norbornene groups tethered to a bifunctional rhodamine dye; (2) the presence of flexible methylene spacers between the dye and the polymerizable norbornene groups. Introduction of norbornene groups on each of the two hydroxy groups of a bifunctional rhodamine resulted in a cross-linked polymer that exhibited better mechanochromic, photochromic, and thermochromic properties compared to the corresponding polymer without cross-links, derived from the derivatization of bifunctional rhodamine with only one norbornene. The introduction of flexible methylene spacers between the two polymerizable norbornenes and the dye molecule resulted in a polymeric framework with rapidly reversible color-changing properties upon mechanical or photostimulation. The ideal monomer molecular structure, whereby (1) attaching norbornene on both sides of the rhodamine dye and (2) methylene spacers between the dye and norbornenes on both sides afforded the nonpareil polymer structure that was capable of thermoreversible mechanochromic and photochromic features, and irreversible thermochromic features. These new materials may find utility as multi-stimuli-responsive soft materials.

Stabilization and X-ray Attenuation of PEGylated Cholesterol/Polycaprolactone-Based Perfluorooctyl Bromide Nanocapsules for CT Imaging.

Contrast-enhanced X-ray computed tomography plays an important role in cancer imaging and disease progression monitoring. Imaging using radiopaque nanoparticle platforms can provide insights on the likelihood of nanoparticle accumulation and can enable image-guided therapies. Perfluorooctyl bromide (PFOB)-loaded nanocapsules designed for this purpose were stabilized using an in-house synthesized PEGylated polycaprolactone-based copolymer (PEG-b-PCL(Ch)) and compared with commercial polycaprolactone employing a Quality-by-Design approach. PFOB is a dense liquid, weakly polarizable, and immiscible in organic and aqueous solvents; thus, carefully designed formulations for optimal colloidal stabilization to overcome settling-associated instability are required. PFOB-loaded nanocapsules exhibited high PFOB loading due to the intrinsic properties of PEG-b-PCL(Ch). Settling and caking are major sources of instability for PFOB formulations. However, the PEG-b-PCL(Ch) copolymer conferred the nanocapsules enough steric impediment and polymer shell elasticity to settle without significant caking, increasing the overall colloidal stability of the formulation. Furthermore, a clear relationship between nanocapsule physical properties and X-ray attenuation was established. Nanocapsules were able to enhance the X-ray contrast in vitro as a function of PFOB loading. This nanocapsule-based platform is promising for future translational studies and image-guided tumor therapy due to its enhanced contrastability and optimal colloidal stability.

Cholesteric mesophase based 1D photonic materials from self-assembly of liquid crystalline block and random terpolymers containing chromonic molecules.

We describe the influence of competing self-organizing phenomena on the formation of cholesteric mesophase in liquid crystalline brush block terpolymers (LCBBTs) and liquid crystalline random brush terpolymers (LCRBTs) containing chromonic molecules. A library of LCBBTs and LCRBTs are synthesized using ring-opening metathesis polymerization (ROMP) of norbornene side-chain functionalized monomers comprising cholesteryl mesogen (NBCh9), chromonic xanthenone (NBXan), and poly(ethylene glycol) (NBMPEG). Compression molded films of LCRBTs containing chromonic molecules display multilevel hierarchical structure in which cholesteric mesophase co-exists with π-π stacking of the chromonic mesophase along with PEG microphase segregated domains. This is unexpected as conventional LCBCPs and LCBBCs that lack chromonic molecules do not form cholesteric mesophases. The presence of π-π interactions modifies the interface at the IMDS so that both chromonic and cholesteric mesophases coexist leading to the manifestation of cholesteric phase for the first time within block architecture and is very reminiscent of previously published LCRBCs without chromonic molecules. The key to the observed hierarchical assembly in these LCBBTs containing chromonic molecules lies in the interplay of LC order, chromonic π-π stacking, PEG side chain microphase segregation, and their supramolecular cooperative motion. This unique "single component" polymer scaffold transforms our capacity to attain nanoscale hierarchies and optical properties from block architecture similar to nanoscale mesophases resulting in random architecture.

Overcoming Wnt-ß-catenin dependent anticancer therapy resistance in leukaemia stem cells.

Leukaemia stem cells (LSCs) underlie cancer therapy resistance but targeting these cells remains difficult. The Wnt-ß-catenin and PI3K-Akt pathways cooperate to promote tumorigenesis and resistance to therapy. In a mouse model in which both pathways are activated in stem and progenitor cells, LSCs expanded under chemotherapy-induced stress. Since Akt can activate ß-catenin, inhibiting this interaction might target therapy-resistant LSCs. High-throughput screening identified doxorubicin (DXR) as an inhibitor of the Akt-ß-catenin interaction at low doses. Here we repurposed DXR as a targeted inhibitor rather than a broadly cytotoxic chemotherapy. Targeted DXR reduced Akt-activated ß-catenin levels in chemoresistant LSCs and reduced LSC tumorigenic activity. Mechanistically, ß-catenin binds multiple immune-checkpoint gene loci, and targeted DXR treatment inhibited expression of multiple immune checkpoints specifically in LSCs, including PD-L1, TIM3 and CD24. Overall, LSCs exhibit distinct properties of immune resistance that are reduced by inhibiting Akt-activated ß-catenin. These findings suggest a strategy for overcoming cancer therapy resistance and immune escape.

Influence of the method of preparation on the characteristics and performance of cholesterol-based polymeric nanoparticles for redox-triggered release of doxorubicin in tumor cells.

Immature manufacturing and sub-optimal control of quality attributes hinder the effective translation of nanoformulations for cancer treatment, being partially responsible for the scarce number of products on the market. The effect of the method of preparation on the performance of complex formulations such as bio-responsive nanomedicines needs further understanding. In this study, we investigated the the influence of the method of preparation on the characteristics and bio-responsiveness of doxorubicin-loaded redox-sensitive nanoparticles (DOX-SS-NPs), formed by a biocompatible cholesterol-based amphiphilic block copolymer (PC5MA-SS-PEO). Two commonly used preparation techniques: (1) cosolvent removal and (2) an O/W emulsion method were compared and the in vitro and in vivo performance of promising formulations was assessed. Besides particle size distribution and drug loading, the response of the nanoparticles to reducing environments and subsequent release kinetics and cytotoxicity were also affected by the method of preparation. The investigation and understanding of this extensive influence, led to a DOX-SS-NPs formulation with significant in vivo efficacy and an improved safety profile when evaluated against free doxorubicin (DOX-HCl) and the commercial pegylated liposomal form (Doxil®). Our findings highlight the importance of formulation optimization and support the use of systematic approaches like Quality by Design to the development of bio-responsive nanomedicines for cancer treatment.

Enhanced Intrafibrillar Mineralization of Collagen Fibrils Induced by Brushlike Polymers.

Biomimetic mineralization of collagen fibrils is an essential process because the mineralized collagen fibers constitute the basic building block of natural bone. To overcome the limited availability and high cost of the noncollagenous proteins (NCPs) that regulate the mineralization process of collagen, commercially available analogues were developed to replicate sequestration and templating functions of NCPs. The use of branched polymers in intrafibrillar mineralization applications has never been explored. In this work, two novel carboxyl-rich brushlike polymers, a carboxylated polyethylene glycol terpolymer (PEG-COOH) and a polyethylene glycol/poly(acrylic acid) copolymer (PEG-PAA), were synthesized and modified to mimic the sequestration function of NCPs to induce intrafibrillar mineralization of collagen fibrils. It was found that these synthetic brushlike polymers are able to induce intrafibrillar mineralization by stabilizing the amorphous calcium phosphate (ACP) nanoprecursors and subsequently facilitating the infiltration of ACP into the gap zone of collagen microfibrils. Moreover, the weight ratios of mineral to collagen in the mineralized collagen fibrils in the presence of these brushlike polymers were 2.17 ± 0.07 for PEG-COOH and 2.23 ± 0.03 for PEG-PAA, while it is only 1.81 ± 0.21 for linear PAA. Plausible mineralization mechanisms using brushlike polymers are proposed that offer significant insight into the understanding of collagen mineralization induced by synthetic NCP analogues.

Three-Dimensional, Enzyme Biohydrogel Electrode for Improved Bioelectrocatalysis.

Higher loading of enzymes on electrodes and efficient electron transfer from the enzyme to the electrode are urgently needed to enhance the current density of biofuel cells. The two-dimensional nature of the electrode surface limits the enzyme loading on the surface, and unfavorable interactions with electrode surfaces cause inactivation of the enzyme. Benign biohydrogels are designed here to address enzyme degradation, and the three-dimensional nature of the biohydrogel enhanced the enzyme density per unit area. A general strategy is demonstrated here using a redox active enzyme glucose oxidase embedded in a bovine serum albumin biohydrogel on flexible carbon cloth electrodes. In the presence of ferricyanide as a mediator, this bioelectrode generated a maximum current density (jmax) of 13.2 mA·cm-2 at 0.45 V in the presence of glucose with a sensitivity of 67 µA·mol-1·cm-2 and a half-life of >2 weeks at room temperature. A strong correlation of current density with water uptake by the biohydrogel was observed. Moreover, a soluble mediator (sodium ferricyanide) in the biohydrogel enhanced the current density by ∼1000-fold, and citrate-phosphate buffer has been found to be the best to achieve the maximum current density. A record 2.2% of the loaded enzyme was electroactive, which is greater than the highest value reported (2-fold). Stabilization of the enzyme in the biohydrogel resulted in retention of the enzymatic activity over a wide range of pH (4.0-8.0). We showed here that biohydrogels are excellent media for enzymatic electron transfer reactions required for bioelectronics and biofuel cell applications.

Controlling orientational order in block copolymers using low-intensity magnetic fields.

The interaction of fields with condensed matter during phase transitions produces a rich variety of physical phenomena. Self-assembly of liquid crystalline block copolymers (LC BCPs) in the presence of a magnetic field, for example, can result in highly oriented microstructures due to the LC BCP's anisotropic magnetic susceptibility. We show that such oriented mesophases can be produced using low-intensity fields (<0.5 T) that are accessible using permanent magnets, in contrast to the high fields (>4 T) and superconducting magnets required to date. Low-intensity field alignment is enabled by the addition of labile mesogens that coassemble with the system's nematic and smectic A mesophases. The alignment saturation field strength and alignment kinetics have pronounced dependences on the free mesogen concentration. Highly aligned states with orientation distribution coefficients close to unity were obtained at fields as small as 0.2 T. This remarkable field response originates in an enhancement of alignment kinetics due to a reduction in viscosity, and increased magnetostatic energy due to increases in grain size, in the presence of labile mesogens. These developments provide routes for controlling structural order in BCPs, including the possibility of producing nontrivial textures and patterns of alignment by locally screening fields using magnetic nanoparticles.

Armored Enzyme-Nanohybrids and Their Catalytic Function Under Challenging Conditions.

Synthesis and characterization of highly stable and functional bienzyme-polymer triads assembled on layered graphene oxide (GO) are described here. Glucose oxidase (GOx) and horseradish peroxidase (HRP) were used as model enzymes and polyacrylic acid (PAA) as model polymer to armor the enzymes. PAA-armored GOx and HRP covalent conjugates were further protected from denaturation by adsorption onto GO nanosheets. Structure and morphology of this enzyme-polymer-nanosheet hybrid biocatalyst (GOx-HRP-PAA/GO) were confirmed by agarose gel electrophoresis, zeta potential, circular dichroism, and transmission electron microscopy. The armored biocatalysts retained full enzymatic activities under challenging conditions of pH (2.5-7.4), warm temperatures (65°C), and presence of chemical denaturants, 4mM sodium dodecyl sulfate, while GOx/HRP physical mixtures without the armor had very little activity under the same conditions. Therefore, this novel combination of two orthogonal approaches, enzyme conjugation with PAA and subsequent physical adsorption onto GO nanosheets, resulted in super stable hybrid biocatalysts that function under harsh conditions. Therefore, this general and powerful approach may be used to design environmentally friendly, green, biocompatible, and biodegradable biocatalysts for energy production in biofuel cell or biobattery applications.

Nanoarmoring of Enzymes by Interlocking in Cellulose Fibers With Poly(Acrylic Acid).

A simple method for interlocking glucose oxidase (GOx) and horseradish peroxidase (HRP) in cellulose fibers using poly(acrylic acid) (PAA) as an armor around the enzyme, without any need for activation of the cellulose support, is reported here. The resulting enzyme paper is an inexpensive, stable, simple, wearable, and washable biosensor. PAA functions as a multifunctional tether to interlock the enzyme molecules around the paper fibers so that the enzymes are protected against thermal/chemical denaturation and not released from the paper when washed with a detergent. The decreased conformational entropy of the interlocked enzyme protected by the nanoarmor is likely responsible for increased enzyme stability to heat and chemical denaturants (retained ≥70 percent enzyme activity after washing with urea or SDS for 30min), and the polymer protects the enzyme against inactivation by proteases, bacteria, inhibitors, etc. The kinetics of the interlocked enzyme were similar to that of the enzyme in solution. The Vmax was 6(±0.5)mM per minute before washing, then increased slightly to 9(±1.4)mM per minute after washing with water. The Km was 22(±6.4mM), which was slightly higher compared to GOx in solution (25-27mM). Because the surface area of the paper does not limit the enzyme loading, about 20% of enzyme was successfully loaded onto the paper (0.2g enzyme per gram of paper), and ≥95% of the enzyme was retained after washing. Interlocking works with other enzymes such as laccase, where ≥60% of the enzyme activity is retained. This novel methodology provides a low cost, simple, modular approach of achieving high enzyme loadings in ordinary filter paper, not limited by cellulose surface area, and there has been no need for complex methods of enzyme engineering or toxic methods of activation of the solid support to prepare highly active biocatalysts.

Nanoarmoring: strategies for preparation of multi-catalytic enzyme polymer conjugates and enhancement of high temperature biocatalysis.

We report a general and modular approach for the synthesis of multi enzyme-polymer conjugates (MECs) consisting of five different enzymes of diverse isoelectric points and distinct catalytic properties conjugated within a single universal polymer scaffold. The five model enzymes chosen include glucose oxidase (GOx), acid phosphatase (AP), lactate dehydrogenase (LDH), horseradish peroxidase (HRP) and lipase (Lip). Poly(acrylic acid) (PAA) is used as the model synthetic polymer scaffold that will covalently conjugate and stabilize multiple enzymes concurrently. Parallel and sequential synthetic protocols are used to synthesise MECs, 5-P and 5-S, respectively. Also, five different single enzyme-PAA conjugates (SECs) including GOx-PAA, AP-PAA, LDH-PAA, HRP-PAA and Lip-PAA are synthesized. The composition, structure and morphology of MECs and SECs are confirmed by agarose gel electrophoresis, dynamic light scattering, circular dichroism spectroscopy and transmission electron microscopy. The bioreactor comprising MEC functions as a single biocatalyst can carry out at least five different or orthogonal catalytic reactions by virtue of the five stabilized enzymes, which has never been achieved to-date. Using activity assays relevant for each of the enzymes, for example AP, the specific activity of AP at room temperature and 7.4 pH in PB is determined and set at 100%. Interestingly, MECs 5-P and 5-S show specific activities of 1800% and 600%, respectively, compared to 100% specific activity of AP at room temperature (RT). The catalytic efficiencies of 5-P and 5-S are 1.55 × 10-3 and 1.68 × 10-3, respectively, compared to 9.11 × 10-5 for AP under similar RT conditions. Similarly, AP relevant catalytic activities of 5-P and 5-S at 65 °C show 100 and 300%, respectively, relative to native AP activity at RT as the native AP is catalytically inactive at 65 °C The catalytic activity trends suggest: (1) MECs show enhanced catalytic activities compared to native enzymes under similar assay conditions and (2) 5-S is better suited for high temperature biocatalysis, while both 5-S and 5-P are suitable for room temperature biocatalysis. Initial cytotoxicity results show that these MECs are non-lethal to human cells including human embryonic kidney [HEK] cells when treated with doses of 0.01 mg mL-1 for 72 h. This cytotoxicity data is relevant for future biological applications.

Reduced in vivo toxicity of doxorubicin by encapsulation in cholesterol-containing self-assembled nanoparticles.

We previously reported the development of an amphiphilic brush-like block copolymer composed of polynorbornene-cholesterol/polyethylene glycol (P(NBCh9-b-NBPEG)) that self-assembles in aqueous media to form long circulating nanostructures capable of encapsulating doxorubicin (DOX-NPs). Biodistribution studies showed that this formulation preferentially accumulates in tumor tissue with markedly reduced accumulation in the heart and other major organs. The aim of the current study was to evaluate the in vivo efficacy and toxicity of DOX containing self-assembled polymer nanoparticles in a mouse xenograft tumor model and compare its effects with the hydrochloride non-encapsulated form (free DOX). DOX-NPs significantly reduced the growth of tumors without inducing any apparent toxicity. Conversely, mice treated with free DOX exhibited significant weight loss, early toxic cardiomyopathy, acute toxic hepatopathy, reduced hematopoiesis and fatal toxicity. The improved safety profile of the polymeric DOX-NPs can be explained by the low circulating concentration of non-nanoparticle-associated drug as well as the reduced accumulation of DOX in non-target organs. These findings support the use of P(NBCh9-b-NBPEG) nanoparticles as delivery platforms for hydrophobic anticancer drugs intended to reduce the toxicity of conventional treatments.

"Stable-on-the-Table" Biosensors: Hemoglobin-Poly (Acrylic Acid) Nanogel BioElectrodes with High Thermal Stability and Enhanced Electroactivity.

In our efforts toward producing environmentally responsible but highly stable bioelectrodes with high electroactivities, we report here a simple, inexpensive, autoclavable high sensitivity biosensor based on enzyme-polymer nanogels. Met-hemoglobin (Hb) is stabilized by wrapping it in high molecular weight poly(acrylic acid) (PAA, M(W) 450k), and the resulting nanogels abbreviated as Hb-PAA-450k, withstood exposure to high temperatures for extended periods under steam sterilization conditions (122 °C, 10 min, 17-20 psi) without loss of Hb structure or its peroxidase-like activities. The bioelectrodes prepared by coating Hb-PAA-450k nanogels on glassy carbon showed well-defined quasi-reversible redox peaks at -0.279 and -0.334 V in cyclic voltammetry (CV) and retained >95% electroactivity after storing for 14 days at room temperature. Similarly, the bioelectrode showed ~90% retention in electrochemical properties after autoclaving under steam sterilization conditions. The ultra stable bioelectrode was used to detect hydrogen peroxide and demonstrated an excellent detection limit of 0.5 µM, the best among the Hb-based electrochemical biosensors. This is the first electrochemical demonstration of steam-sterilizable, storable, modular bioelectrode that undergoes reversible-thermal denaturation and retains electroactivity for protein based electrochemical applications.

Redox-sensitive nanoparticles from amphiphilic cholesterol-based block copolymers for enhanced tumor intracellular release of doxorubicin.

A novel amphiphilic cholesterol-based block copolymer comprised of a polymethacrylate bearing cholesterol block and a polyethylene glycol block with reducible disulfide bonds (PC5MA-SS-PEO) was synthesized and evaluated as a redox-sensitive nanoparticulate delivery system. The self-assembled PC5MA-SS-PEO nanoparticles (SS-NPs) encapsulated the anticancer drug doxorubicin (DOX) with high drug loading (18.2% w/w) and high encapsulation efficiency (94.9%). DOX-encapsulated PC5MA-SS-PEO self-assembled nanoparticles (DOX-encapsulated SS-NPs) showed excellent stability and exhibited a rapid DOX release in response to dithiothreitol reductive condition. Importantly, following internalization by lung cancer cells, the reducible DOX-encapsulated SS-NPs achieved higher cytotoxicity than the non-reducible thioester NPs whereas blank nanoparticles were non-cytotoxic. Furthermore, in vivo imaging studies in tumor-bearing severe combined immunodeficiency (SCID) mice showed that the nanoparticles preferentially accumulated in tumor tissue with remarkably reduced accumulation in the healthy non-target organs. The results indicated that the SS-NPs may be a promising platform for cancer-cell specific delivery of hydrophobic anticancer drugs. FROM THE CLINICAL EDITOR: The use of nanocarriers for drug delivery against tumors has been under intense research. One problem of using carrier system is the drug release kinetics at tumor site. In this article, the authors continued their previous study in the development of an amphiphilic cholesterol-based block copolymer with redox-sensitive modification, so that the payload drug could be released in response to the microenvironment. The interesting results should provide a new direction for designing future novel nanocarrier systems.

Nanocomposite hydrogels based on liquid crystalline brush-like block copolymer-Au nanorods and their application in H2O2 detection.

New nanocomposite hydrogels from liquid crystalline brush-like block copolymers (LCBBCs) and gold nanorods (AuNRs) were synthesized and characterized. The hydrogels protected and stabilized AuNRs, which presented peroxidase-like activity and catalysed the oxidation of a substrate in the presence of H2O2 and elicited a sensitive chromogenic response. This reusable, table-top stable, free-standing nanocomposite hydrogel platform can be used to develop a simple and reproducible method to detect H2O2.

Lithium-end-capped polylactide thin films influence osteoblast progenitor cell differentiation and mineralization.

End-capping by covalently binding functional groups to the ends of polymer chains offers potential advantages for tissue engineering scaffolds, but the ability of such polymers to influence cell behavior has not been studied. As a demonstration, polylactide (PLA) was end-capped with lithium carboxylate ionic groups (hPLA13kLi) and evaluated. Thin films of the hPLA13kLi and PLA homopolymer were prepared with and without surface texturing. Murine osteoblast progenitor cells from collagen 1α1 transgenic reporter mice were used to assess cell attachment, proliferation, differentiation, and mineralization. Measurement of green fluorescent protein expressed by these cells and xylenol orange staining for mineral allowed quantitative analysis. The hPLA13kLi was biologically active, increasing initial cell attachment and enhancing differentiation, while reducing proliferation and strongly suppressing mineralization, relative to PLA. These effects of bound lithium ions (Li(+) ) had not been previously reported, and were generally consistent with the literature on soluble additions of lithium. The surface texturing generated here did not influence cell behavior. These results demonstrate that end-capping could be a useful approach in scaffold design, where a wide range of biologically active groups could be employed, while likely retaining the desirable characteristics associated with the unaltered homopolymer backbone.

Long circulating self-assembled nanoparticles from cholesterol-containing brush-like block copolymers for improved drug delivery to tumors.

Amphiphilic brush-like block copolymers composed of polynorbonene-cholesterol/poly(ethylene glycol) (P(NBCh9-b-NBPEG)) self-assembled to form a long circulating nanostructure capable of encapsulating the anticancer drug doxorubicin (DOX) with high drug loading (22.1% w/w). The release of DOX from the DOX-loaded P(NBCh9-b-NBPEG) nanoparticles (DOX-NPs) was steady at less than 2% per day in PBS. DOX-NPs were effectively internalized by human cervical cancer cells (HeLa) and showed dose-dependent cytotoxicity, whereas blank nanoparticles were noncytotoxic. The DOX-NPs demonstrated a superior in vivo circulation time relative to that of free DOX. Tissue distribution and in vivo imaging studies showed that DOX-NPs preferentially accumulated in tumor tissue with markedly reduced accumulation in the heart and other vital organs. The DOX-NPs greatly improved survival and significantly inhibited tumor growth in tumor-bearing SCID mice compared to that for the untreated and free DOX-treated groups. The results indicated that self-assembled P(NBCh9-b-NBPEG) may be a useful carrier for improving tumor delivery of hydrophobic anticancer drugs.