An investigation of the transmission of Actinobacillus pleuropneumoniae within vertically integrated systems using whole genome sequencing.

Actinobacillus pleuropneumoniae (APP) causes significant economic losses to the swine industry. Antibiotic treatment can be challenging due to its clinical urgency and the turnover of antimicrobial susceptibility results from the diagnostic laboratory. The aim of this study was to evaluate the vertical transmission of APP within integrated systems as a criterion for optimising antimicrobial treatment in the field, using whole genome sequencing (WGS). Additionally, the genetic variability of Spanish APP isolates has been assessed to decipher antimicrobial resistance (AMR) determinants, toxin presence, serotype, and phenotype/genotype concordance of AMR. A total of 169 isolates from clinical cases of porcine pleuropneumonia with known antimicrobial susceptibility profiles were sequenced. Additionally, 48 NCBI assemblies were included to perform a phylogenetic analysis. Phylogenetic analysis revealed high association between phylogenetic clusters, serotypes, and presence of toxins that are associated within vertically integrated systems by its epidemiological link. Concordance between presence of AMR determinants (genotype) vs in-vitro antimicrobial susceptibility pattern (phenotype) was acceptable for amoxicillin, florfenicol, oxytetracycline, and enrofloxacin using epidemiological cut-off values (ECOFFs), but low concordance was observed for doxycycline and trimethoprim-sulfamethoxazole (T/S). On the other hand, using CLSI clinical breakpoints (CBPs), concordance was acceptable for florfenicol and enrofloxacin and not evaluated for doxycycline, oxytetracycline, trimethoprim-sulfamethoxazole (T/S), and amoxicillin because no CBP are available for them. Finally, WGS has demonstrated the clonality between isolates that shared a common origin (grandmother's farm) and resistance phenotype, suggesting vertical transmission of this pathogen and supporting the use of the epidemiological approach as a good criterion to optimise the antimicrobial use.

Phylogenetic Analysis of Hepatitis C Virus Infections in a Large Belgian Cohort Using Next-Generation Sequencing of Full-Length Genomes.

The hepatitis C virus (HCV) epidemic in Western countries is primarily perpetuated by the sub-populations of men who have sex with men (MSM) and people who inject drugs (PWID). Understanding the dynamics of transmission in these communities is crucial for removing the remaining hurdles towards HCV elimination. We sequenced 269 annotated HCV plasma samples using probe enrichment and next-generation sequencing, obtaining 224 open reading frames of HCV (OR497849-OR498072). Maximum likelihood phylogenies were generated on the four most prevalent subtypes in this study (HCV1a, 1b, 3a, 4d) with a subsequent transmission cluster analysis. The highest rate of clustering was observed for HCV4d samples (13/17 (76.47%)). The second highest rate of clustering was observed in HCV1a samples (42/78 (53.85%)) with significant association with HIV-positive MSM. HCV1b and HCV3a had very low rates of clustering (2/83 (2.41%) and (0/29)). The spread of the prevalent subtype HCV1b appears to have been largely curtailed, and we demonstrate the onwards transmission of HCV1a and HCV4d in the HIV-positive MSM population across municipal borders. More systematic data collection and sequencing is needed to allow a better understanding of the HCV transmission among the community of PWID and overcome the remaining barriers for HCV elimination in Belgium.

Stannaborates: tuning the ion conductivity of dodecaborate salts with tin substitution.

Metal substituted dodecaborate anions can be coupled with alkali metal cations to have great potential as solid-state ion conductors for battery applications. A tin atom can replace a B-H unit within an unsubstituted dodecaborate cage to produce a stable, polar divalent anion. The chemical and structural change in forming a stannaborate results in a modified crystal structure of respective group 1 metal salts, and as a result, improves the material's ion conductivity. Li2B11H11Sn shows high ion conductivity of ∼8 mS cm-1 at 130 °C, similar to the state-of-the-art LiCB11H12 at these temperatures, however, obtaining high ion conductivity at room temperature is not possible with pristine alkali metal stannaborates.

Thermochemical energy storage in barium carbonate enhanced by iron(III) oxide.

Renewable energy requires cost effective and reliable storage to compete with fossil fuels. This study introduces a new reactive carbonate composite (RCC) where Fe2O3 is used to thermodynamically destabilise BaCO3 and reduce its decomposition temperature from 1400 °C to 850 °C, which is more suitable for thermal energy storage applications. Fe2O3 is consumed on heating to form BaFe12O19, which is a stable Fe source for promoting reversible CO2 reactions. Two reversible reaction steps were observed that corresponded to, first, the reaction between ß-BaCO3 and BaFe12O19, and second, between γ-BaCO3 and BaFe12O19. The thermodynamic parameters were determined to be ΔH = 199 ± 6 kJ mol-1 of CO2, ΔS = 180 ± 6 J K-1 mol-1 of CO2 and ΔH = 212 ± 6 kJ mol-1 of CO2, ΔS = 185 ± 7 J K-1 mol-1 of CO2, respectively, for the two reactions. Due to the low-cost and high gravimetric and volumetric energy density, the RCC is demonstrated to be a promising candidate for next generation thermal energy storage.

Full-genome next-generation sequencing of hepatitis C virus to assess the accuracy of genotyping by the commercial assay LiPA and the prevalence of resistance-associated substitutions in a Belgian cohort.

BACKGROUND: Although most currently used regimens for Hepatitis C virus (HCV) infections can be initiated without prior knowledge of genotype and subtype, genotyping is still useful to identify patients who might benefit from a personalized treatment due to resistance to direct-acting antivirals (DAA). OBJECTIVES: To assess the utility of full-genome next-generation sequencing (FG-NGS) for HCV genotyping. STUDY DESIGN: 138 HCV plasma samples previously genotyped by VERSANT HCV Genotype Assay (LiPA) were subjected to FG-NGS and phylogenetically genotyped Genome Detective. Consensuses were analysed by HCV-GLUE for resistance-associated substitutions (RASs) and their impact on treatment response was investigated. RESULTS: 102/138 (73.9%) samples were sequenced to a genome coverage and depth of >90% of the HCV open reading frame covered by >100 reads/site. Concordant genotype and subtype results were assigned in 97.1% and 79.4% of samples, respectively. FG-NGS resolved the subtype of 13.7% samples that had ambiguous calls by LiPA and identified one dual infection and one recombinant strain. At least one RAS was found for the HCV genes NS3, NS5A, and NS5B in 2.91%, 36.98% and 27.3% samples, respectively. Irrespective of the observed RAS, all patients responded well to DAA treatment, except for HCV1b-infected patients treated with Zepatier (33.3% failure rate (5/15)). CONCLUSION: While LiPA and FG-NGS showed overall good concordance, FG-NGS improved specificity for subtypes, recombinant and mixed infections. FG-NGS enabled the detection of RAS, but its predictive value for treatment outcome in DAA-naïve patients remains uncertain. With additional refinements, FG-NGS may be the way forward for HCV genotyping.

Structural Diversity and Trends in Properties of an Array of Hydrogen-Rich Ammonium Metal Borohydrides.

Metal borohydrides are a fascinating and continuously expanding class of materials, showing promising applications within many different fields of research. This study presents 17 derivatives of the hydrogen-rich ammonium borohydride, NH4BH4, which all exhibit high gravimetric hydrogen densities (>9.2 wt % of H2). A detailed insight into the crystal structures combining X-ray diffraction and density functional theory calculations exposes an intriguing structural variety ranging from three-dimensional (3D) frameworks, 2D-layered, and 1D-chainlike structures to structures built from isolated complex anions, in all cases containing NH4+ countercations. Dihydrogen interactions between complex NH4+ and BH4- ions contribute to the structural diversity and flexibility, while inducing an inherent instability facilitating hydrogen release. The thermal stability of the ammonium metal borohydrides, as a function of a range of structural properties, is analyzed in detail. The Pauling electronegativity of the metal, the structural dimensionality, the dihydrogen bond length, the relative amount of NH4+ to BH4-, and the nearest coordination sphere of NH4+ are among the most important factors. Hydrogen release usually occurs in three steps, involving new intermediate compounds, observed as crystalline, polymeric, and amorphous materials. This research provides new opportunities for the design and tailoring of novel functional materials with interesting properties.

Ammonium-Ammonia Complexes, N2H7+, in Ammonium closo-Borate Ammines: Synthesis, Structure, and Properties.

Metal closo-borates have recently received significant attention due to their potential applications as solid-state ionic conductors. Here, the synthesis, crystal structures, and properties of (NH4)2B10H10·xNH3 (x = 1/2, 1 (α and ß)) and (NH4)2B12H12·xNH3 (x = 1 and 2) are reported. In situ synchrotron radiation powder X-ray diffraction allows for the investigation of structural changes as a function of temperature. The structures contain the complex cation N2H7+, which is rarely observed in solid materials, but can be important for proton conductivity. The structures are optimized by density functional theory (DFT) calculations to validate the structural models and provide detailed information about the hydrogen positions. Furthermore, the hydrogen dynamics of the complex cation N2H7+ are studied by molecular dynamics simulations, which reveals several events of a proton transfer within the N2H7+ units. The thermal properties are investigated by thermogravimetry and differential scanning calorimetry coupled with mass spectrometry, revealing that NH3 is released stepwise, which results in the formation of (NH4)2BnHn (n = 10 and 12) during heating. The proton conductivity of (NH4)2B12H12·xNH3 (x = 1 and 2) determined by electrochemical impedance spectroscopy is low but orders of magnitude higher than that of pristine (NH4)2B12H12. The thermal stability of the complex cation N2H7+ is high, up to 170 °C, which may provide new possible applications of these proton-rich materials.

A pressurized flow reactor combustion experiment interfaced with synchrotron double imaging photoelectron photoion coincidence spectroscopy.

A new pressurized low-temperature combustion experiment has been commissioned at the Swiss Light Source, Paul Scherrer Institute. The experiment uses photoionization with tunable synchrotron radiation and double imaging photoelectron photoion coincidence (i2PEPICO) detection at the vacuum ultraviolet beamline. The experimental setup is described, including the high-pressure reactor experiment, sampling interface, and reactant delivery system. The CRF-PEPICO (Combustion Reactions Followed by Photoelectron Photoion Coincidence) endstation and VUV beamline are briefly elaborated. The novel aspects of the apparatus and the new components are elucidated in detail, such as the fluid supply system to the reactor and the reactor integration into the endstation. We also present a system overview of the experimental setup. The technical details are followed by a description of the experimental procedure used to operate the pressurized flow reactor setup. Finally, first experimental results demonstrating the capability of the setup are provided and analyzed. A major advantage of this new experiment is that the excellent isomer resolution capabilities of the i2PEPICO technique can be transferred to the investigation of reactions at elevated pressures of several bars. This enables the investigation of pressure effects on the reactivity of fuel mixtures and covers more realistic conditions found in technical combustors. The capability to obtain quantitative oxidation data is confirmed, and the main and certain intermediate species are quantified for a selected condition. The results show excellent agreement with a chemical kinetics model and previously published reference measurements performed with a gas chromatography setup.

Analysis of Mass Flows and Membrane Cross-over in CO2 Reduction at High Current Densities in an MEA-Type Electrolyzer.

Cell designs that integrate membrane-electrode assemblies (MEAs) with highly selective catalysts are a promising route to reduce ohmic losses and achieve high energy efficiency in CO2 reduction at industrially relevant current densities. In this work, porous silver filtration membranes are demonstrated as simple and efficient gas-diffusion electrodes for CO2 reduction to CO at high current densities in an MEA-type device. A partial current density for CO of up to ca. 200 mA cm-2 was achieved at a cell voltage of ca. 3.3 V, in tandem with minimal H2 production. However, the analysis of cathodic and anodic outlet streams revealed that CO2 cross-over across the anion-exchange membranes, mostly in the form of CO32- but partially as HCOO- generated over the cathode, actually exceeds the amount of CO2 converted to the target product, resulting in a poor utilization of the reactant and in the early onset of mass transfer limitations. In addition, CO2 cross-over leads to a nonstoichiometric decrease of the outlet flow rate from the cathodic compartment. This effect can lead to a substantial overestimation of catalytic performance if the inlet flow rate of CO2 is used as reference for calculating partial current densities and Faradaic efficiencies. The results of this work highlight the importance of carrying out a carbon balance, in addition to traditional measurements of activity and selectivity, to adequately assess the performance of CO2 reduction devices at high current densities, and inform future efforts aimed at mitigating membrane cross-over in MEA-type electrolyzers for CO2 reduction.

Potassium octahydridotriborate: diverse polymorphism in a potential hydrogen storage material and potassium ion conductor.

Octahydridoborate, i.e. [B3H8]- containing compounds, have recently attracted interest for hydrogen storage. In the present study, the structural, hydrogen storage, and ion conductivity properties of KB3H8 have been systematically investigated. Two distinct polymorphic transitions are identified for KB3H8 from a monoclinic (α) to an orthorhombic (α') structure at 15 °C via a second-order transition and eventually to a cubic (ß) structure at 30 °C by a first-order transition. The ß-polymorph of KB3H8 displays a high degree of disorder of the [B3H8]- anion, which facilitates increased cation mobility, reaching a K+ conductivity of ∼10-7 S cm-1 above 100 °C. ß-KB3H8 starts to release hydrogen at ∼160 °C, simultaneously with the release of B5H9 and trace amounts of B2H6. KBH4 and K3(BH4)(B12H12) are identified as crystalline decomposition products above 200 °C, and the formation of a KBH4 deficient structure of K3-x(BH4)1-x(B12H12) is observed at elevated temperature. The hydrogen-uptake properties of a KB3H8-2KH composite have been examined under 380 bar H2, resulting in the formation of KBH4 at T≥ 150 °C along with higher metal hydridoborates, i.e. K2B9H9, K2B10H10, and K2B12H12.

Complexation of Ammonia Boranes with Al3.

Ammonia borane, NH3BH3 (AB), is very attractive for hydrogen storage; however, it dehydrogenates exothermally, producing a mixture of polymeric products with limited potential for direct rehydrogenation. Recently, it was shown that AB complexed with Al3+ in Al(BH4)3·AB endothermically dehydrogenates to a single product identified as Al(BH4)3·NHBH, with the potential for direct rehydrogenation of AB. Here we explore the reactivity of AB-derived RNH2BH3 (R = -CH3, -CH2-) with AlX3 salts (X = BH4-, Cl-), aiming to extend the series to different anions and to enlarge the stability window for Al(BH4)3·NRBH. Three novel complexes were identified: Al(BH4)3·CH3NH2BH3 having a molecular structure similar to that of Al(BH4)3·AB but different dehydrogenation properties, as well as [Al(CH3NH2BH3)2Cl2][AlCl4] and [Al(NH2CH2CH2NH2)(BH4)2][Al(BH4)4], rare examples of Al3+ making part of the cations and anions simultaneously. The latter compounds are of interest in the design of novel electrolytes for Al-based batteries. The coordination of two ABs to a single Al atom opens a route to materials with higher hydrogen content.

Trends in Synthesis, Crystal Structure, and Thermal and Magnetic Properties of Rare-Earth Metal Borohydrides.

Synthesis, crystal structures, and thermal and magnetic properties of the complete series of halide-free rare-earth (RE) metal borohydrides are presented. A new synthesis method provides high yield and high purity products. Fifteen new metal borohydride structures are reported. The trends in crystal structures, thermal behavior, and magnetic properties for the entire series of RE(BH4) x are compared and discussed. The RE(BH4) x possess a very rich crystal chemistry, dependent on the oxidation state and the ionic size of the rare-earth ion. Due to the lanthanide contraction, there is a significant decrease in the volume of the RE3+-ion with increasing atomic number, which correlates linearly with the unit cell volume of the α- and ß-RE(BH4)3 polymorphs and the solvated complexes α-RE(BH4)3·S(CH3)2. The thermal analysis reveals a one-step decomposition pathway in the temperature range from 247 to 277 °C for all RE(BH4)3 except Lu(BH4)3, which follows a three-step decomposition pathway. In contrast, the RE(BH4)2 decompose at higher temperatures in the range 306 to 390 °C due to lower charge density on the rare-earth ion. The RE(BH4)3 show increasing stability with increasing Pauling electronegativity, which contradicts other main group and transition metal borohydrides. The majority of the compounds follow Curie-Weiss paramagnetic behavior down to 3 K with weak antiferromagnetic interactions and magnetic moments in accord with those of isolated 4f ions. Some of the RE(BH4) x display varying degrees of temperature-dependent magnetic moments due to low-lying excited stated induced by crystal field effects. Additionally, a weak antiferromagnetic ordering is observed in Gd(BH4)3, indicating superexchange through a borohydride group.

Molten metal closo-borate solvates.

Solvated lithium closo-dodecaborate, Li2B12H12 with tetrahydrofuran and acetonitrile, show unexpected melting below 150 °C. This feature has been explored to melt-infiltrate Li2B12H12 in a nanoporous SiO2 scaffold. The ionic conductivity of Li2B12H12·xACN reaches 0.08 mS cm-1 in the liquid state at 150 °C making them suitable as battery electrolytes.

15-O-water myocardial flow reserve PET and CT angiography by full hybrid PET/CT as a potential alternative to invasive angiography.

Combined myocardial flow reserve (MFR) by PET and CT coronary angiography (CTA) is a promising tool for assessment of coronary artery disease. Prior analyses of MFR/CTA has been performed as side-by-side interpretation, not as volume rendered, full hybrid analysis, with fused MFR/CTA. We aimed to: (i) establish a method for full hybrid analysis of MFR/CTA, (ii) validate the inter- and intra-observer reproducibility of MFR values, and (iii) determine the diagnostic value of side-by-side versus full hybrid MFR/CTA with 15-O-water PET. Forty-four outpatients scheduled for invasive coronary angiography (ICA) were enrolled prospectively. All underwent rest/stress 15-O-water PET/CTA with ICA as reference. Within two observers of different experience, the Pearson r at global and territorial level exceeded 0.953 for rest, stress, and MFR values, as determined by Carimas software. Within and between observers, the mean differences between rest, stress, and MFR values were close to zero and the confidence intervals for 95% limits of agreement were narrow. The diagnostic performance of full hybrid PET/CTA did not outperform the side-by-side approach, but performed better than MFR without CTA at vessel level: specificity 93% (95% confidence limits: 89-97%) versus 76% (64-88%), p = 0.0004; positive predictive value 71% (55-86%) versus 51% (37-65%), p = 0.0001; accuracy 90% (84-95%) versus 77% (69-84%), p = 0.0009. MFR showed high reproducibility within and between observers of different experience. The full hybrid model was not superior to side-by-side interpretation of MFR/CTA, but proved better than MFR alone at vessel level with regard to specificity, positive predictive value, and accuracy.

From Metal Hydrides to Metal Borohydrides.

Commencing from metal hydrides, versatile synthesis, purification, and desolvation approaches are presented for a wide range of metal borohydrides and their solvates. An optimized and generalized synthesis method is provided for 11 different metal borohydrides, M(BH4) n, (M = Li, Na, Mg, Ca, Sr, Ba, Y, Nd, Sm, Gd, Yb), providing controlled access to more than 15 different polymorphs and in excess of 20 metal borohydride solvate complexes. Commercially unavailable metal hydrides (MH n, M = Sr, Ba, Y, Nd, Sm, Gd, Yb) are synthesized utilizing high pressure hydrogenation. For synthesis of metal borohydrides, all hydrides are mechanochemically activated prior to reaction with dimethylsulfide borane. A purification process is devised, alongside a complementary desolvation process for solvate complexes, yielding high purity products. An array of polymorphically pure metal borohydrides are synthesized in this manner, supporting the general applicability of this method. Additionally, new metal borohydrides, α-, α'- ß-, γ-Yb(BH4)2, α-Nd(BH4)3 and new solvates Sr(BH4)2·1THF, Sm(BH4)2·1THF, Yb(BH4)2· xTHF, x = 1 or 2, Nd(BH4)3·1Me2S, Nd(BH4)3·1.5THF, Sm(BH4)3·1.5THF and Yb(BH4)3· xMe2S (" x" = unspecified), are presented here. Synthesis conditions are optimized individually for each metal, providing insight into reactivity and mechanistic concerns. The reaction follows a nucleophilic addition/hydride-transfer mechanism. Therefore, the reaction is most efficient for ionic and polar-covalent metal hydrides. The presented synthetic approaches are widely applicable, as demonstrated by permitting facile access to a large number of materials and by performing a scale-up synthesis of LiBH4.

Mass Spectrometric Study on the Combustion of Tetramethylsilane and the Formation of Silicon Oxide Clusters in Premixed Laminar Low-Pressure Synthesis Flames.

This work investigates the decomposition of tetramethylsilane and the formation of silicon oxide clusters in a laminar premixed low-pressure hydrogen flame using molecular-beam mass spectrometry (MBMS). A comprehensive list of the species that exist in the gas phase was compiled and spatially resolved mole fraction profiles of species in the flame were obtained. Quantitative data in dependence of height above the burner were obtained for all major species and intermediates. The MBMS detection technique allowed to monitor Si-C-O-H, and Si-O-H-containing compounds as well as C1-C2 species. The measured data show that the reaction of tetramethylsilane is initiated by H-abstraction from a methyl group and subsequent formation of oxygenated species. The measurements suggest that combustion of tetramethylsilane in a hydrogen flame proceeds mainly by a stepwise substitution of the methyl ligands by hydroxyl groups. Molecular and radical intermediates like Si(CH3)2OH, Si(OH)3, and Si(OH)4 are formed in the reaction zone. Significant amounts of Si(OH)4 are present at large distances above the burner. A repetitive growth pattern suggests that the monomer Si(OH)4 is a likely species initiating the formation and growth of larger silicon oxide clusters, e.g., Si4O10H4, Si5O12H4, and Si6O14H4, that can form nanoparticles in subsequent reactions.

Hydrogenation properties of lithium and sodium hydride - closo-borate, [B10H10]2- and [B12H12]2-, composites.

The hydrogen absorption properties of metal closo-borate/metal hydride composites, M2B10H10-8MH and M2B12H12-10MH, M = Li or Na, are studied under high hydrogen pressures to understand the formation mechanism of metal borohydrides. The hydrogen storage properties of the composites have been investigated by in situ synchrotron radiation powder X-ray diffraction at p(H2) = 400 bar and by ex situ hydrogen absorption measurements at p(H2) = 526 to 998 bar. The in situ experiments reveal the formation of crystalline intermediates before metal borohydrides (MBH4) are formed. On the contrary, the M2B12H12-10MH (M = Li and Na) systems show no formation of the metal borohydride at T = 400 °C and p(H2) = 537 to 970 bar. 11B MAS NMR of the M2B10H10-8MH composites reveal that the molar ratio of LiBH4 or NaBH4 and the remaining B species is 1 : 0.63 and 1 : 0.21, respectively. Solution and solid-state 11B NMR spectra reveal new intermediates with a B : H ratio close to 1 : 1. Our results indicate that the M2B10H10 (M = Li, Na) salts display a higher reactivity towards hydrogen in the presence of metal hydrides compared to the corresponding [B12H12]2- composites, which represents an important step towards understanding the factors that determine the stability and reversibility of high hydrogen capacity metal borohydrides for hydrogen storage.

Perovskite alkali metal samarium borohydrides: crystal structures and thermal decomposition.

A new synthesis method of samarium borohydride, Sm(BH4)2, using tetrahydrofuran borane, THF-BH3, and samarium hydride, SmH2, has been demonstrated and verified. The synthesised Sm(BH4)2 was mechanochemically treated with MBH4, M = K, Rb, Cs. Initially, the formation of KSm(BH4)3 is observed while subsequent heat treatment is necessary to form MSm(BH4)3, M = Rb, Cs. The new compounds crystallise in orthorhombic unit cells adopting perovskite-type 3D frameworks containing distorted [Sm(BH4)6] octahedra. In situ X-ray diffraction studies reveal two second-order polymorphic transitions of α-CsSm(BH4)3via a tetragonal intermediate, α'-CsSm(BH4)3, into a cubic high-temperature polymorph, ß-CsSm(BH4)3, resembling an ideal perovskite structure. The new compounds, MSm(BH4)3, are thermally stable up to T ∼ 280 °C after which they decompose into mainly MBH4, SmH2 and possibly SmB6 and SmB12H12. Finally, after three cycles of hydrogen release and uptake, the storage capacity was 1.0 wt% for KSm(BH4)3 and 0.84 wt% for RbSm(BH4)3 and CsSm(BH4)3.

Metal borohydride formation from aluminium boride and metal hydrides.

Metal borides are often decomposition products from metal borohydrides and thus play a role in the reverse reaction where hydrogen is absorbed. In this work, aluminium boride, AlB2, has been investigated as a boron source for the formation of borohydrides under hydrogen pressures of p(H2) = 100 or 600 bar at elevated temperatures (350 or 400 °C). The systems AlB2-MHx (M = Li, Na, Mg, Ca) have been investigated, producing LiBH4, NaBH4 and Ca(BH4)2, whereas the formation of Mg(BH4)2 was not observed at T = 400 °C and p(H2) = 600 bar. The formation of the metal borohydrides is confirmed by powder X-ray diffraction and infrared spectroscopy and the fraction of boron in AlB2 and M(BH4)x is determined quantitatively by 11B MAS NMR. Hydrogenation for 12 h at T = 350-400 °C and p(H2) = 600 bar leads to the formation of substantial amounts of LiBH4 (38.6 mol%), NaBH4 (83.0 mol%) and Ca(BH4)2 (43.6 mol%).

Synthesis and thermal stability of perovskite alkali metal strontium borohydrides.

Three new perovskite-type bimetallic alkali metal strontium borohydride compounds, α-MSr(BH4)3 (M = K, Rb, Cs), have been synthesized and investigated by in situ synchrotron radiation powder X-ray diffraction, thermal analysis combined with mass spectrometry and Sievert's measurements. The bimetallic borohydrides were synthesized via an addition reaction between Sr(BH4)2 and MBH4 (M = K, Rb, Cs) by mechanochemical treatment. The Sr(BH4)2-NaBH4 system, which was treated in a similar manner, did not undergo reaction. All three α-MSr(BH4)3 compounds crystallize in the orthorhombic crystal system at room temperature: KSr(BH4)3 (P21cn), a = 7.8967(6), b = 8.2953(7), and c = 11.508(1) Å (V = 753.82(12) Å(3)). RbSr(BH4)3 (Pbn21), a = 8.0835(3), b = 8.3341(4), and c = 11.6600(5) Å (V = 785.52(6) Å(3)). CsSr(BH4)3 (P22121), a = 8.2068(9), b = 8.1793(9), and c = 6.0761(4) Å (V = 407.87(7) Å(3)). All three compounds are perovskite-type 3D framework structures built from distorted [Sr(BH4)6] octahedra. High-temperature polymorphs are identified to form at 258, 220 and 150 °C for MSr(BH4)3, M = K, Rb and Cs, respectively. The new compounds are thermally stable and decompose at T > 360 °C into SrB6, SrH2 and MBH4 (M = K, Rb, Cs).