Fluorescence and absorption of rhodamine 6G solutions as pressure standards for a diamond-anvil cell.

The absorption and fluorescence spectra of rhodamine 6G (R6G) dissolved in water, methanol, ethanol and isopropanol have been applied to calibrate the pressure in a diamond anvil cell (DAC). Owing to the strong initially nearly linear temperature-independent bathochromic shift of 7 nm GPa-1 found in absorption and emission bands for methanol R6G solutions, they are ideal for precise pressure calibration to over 3.4 GPa, when methanol freezes. Analogous bathochromic shifts as a function of pressure are revealed for aqueous, ethanolic and isopropanolic solutions. The pressure-induced shifts are considerably reduced in the crystallized solution. Practical protocols are presented to calibrate high pressures with R6G solutions.

Temperature and volumetric effects on structural and dielectric properties of hybrid perovskites.

Three-dimensional organic-inorganic perovskites are rapidly evolving materials with diverse applications. This study focuses on their two representatives - acetamidinium manganese(II) formate (AceMn) and formamidinium manganese(II) formate (FMDMn) - subjected to varying temperature and pressure. We show that AceMn undergoes atypical pressure-induced structural transformations at room temperature, increasing the symmetry from ambient-pressure P21/n phase II to the high-pressure Pbca phase III. In turn, FMDMn in its C2/c phase II displays temperature- and pressure-induced ordering of cage cations that proceeds without changing the phase symmetry or energy barriers. The FMD+ cations do not order under constant volume across the pressure-temperature plane, despite similar pressure and temperature evolution of the unit-cell parameters. Temperature and pressure affect the cage cations differently, which is particularly pronounced in their relaxation dynamics seen by dielectric spectroscopy. Their motion require a rearrangement of the metal-formate framework, resulting in the energy and volumetric barriers defined by temperature-independent activation energy and activation volume parameters. As this process is phonon-assisted, the relaxation time is strongly temperature-dependent. Consequently, relaxation times do not scale with unit-cell volume nor H-bond lengths in formates, offering the possibility of tuning their electronic properties by external stimuli (like temperature or pressure) even without any structural changes.

Structural insight into piezo-solvatochromism of Reichardt's dye.

To date, accurate modelling of the solvation process is challenging, often over-simplifying the solvent-solute interactions. The interplay between the molecular arrangement associated with the solvation process and crystal nucleation has been investigated by analysis of the piezo-solvatochromic behaviour of Reichardt's dye, ET(1), in methanol, ethanol and acetone under high pressure. High-pressure single-crystal X-ray diffraction and UV-Vis spectroscopy reveal the impact of solute-solvent interactions on the optical properties of ET(1). The study underscores the intricate relationship between solvent properties, molecular conformation and crystal packing. The connection between liquid and solid phases emphasizes the capabilities of high-pressure methods for expanding the field of crystal engineering. The high-pressure environment allowed the determination of the crystal structures reported here that are built from organic molecules fourfold solvated with ethanol or methanol: ET(1)·4CH3OH and ET(1)·4C2H5OH·H2O. The observed piezo-solvatochromic effects highlight the potential of ET(1) in nonlinear optoelectronics and expand the application of solvatochromic chemical indicators to pressure sensors.

Unprecedented Richness of Temperature- and Pressure-Induced Polymorphism in 1D Lead Iodide Perovskite.

Inherent features of metal halide perovskites are their softness, complex lattice dynamics, and phase transitions spectacularly tuning their structures and properties. While the structural transformations are well described and classified in 3D perovskites, their 1D analogs are much less understood. Herein, both temperature- and pressure-dependent structural evolutions of a 1D AcaPbI3 perovskitoid incorporating acetamidinium (Aca) cation are examined. The study reveals the existence of nine phases of δ-AcaPbI3, which present the most diverse polymorphic collection among known perovskite materials. Interestingly, temperature- and pressure-triggered phase transitions in the 1D perovskotoid exhibit fundamentally different natures: the thermal transformations are mainly associated with the collective translations of rigid polyanionic units and ordering/disordering dynamics of Aca cations, while the compression primarily affects inorganic polymer chains. Moreover, in the 1-D chains featuring the face-sharing connection mode of the PbI6 octahedra the Pb···Pb distances are significantly shortened compared to the corner-sharing 3D perovskite frameworks, hence operating in the van der Waals territory. Strikingly, a good correlation is found between the Pb···Pb distances and the pressure evolution of the bandgap values in the δ-AcaPbI3, indicating that in 1D perovskitoid structures, the contacts between Pb2+ ions are one of the critical parameters determining their properties.

Revisiting a (001)-oriented layered lead chloride templated by 1,2,4-triazolium: structural phase transitions, lattice dynamics and broadband photoluminescence.

This study revisits a (001)-oriented layered lead chloride templated by 1,2,4-triazolium, Tz2PbCl4, which recently has been an object of intense research but still suffers from gaps in characterization. Indeed, the divergent reports on the crystal structures of Tz2PbCl4 at various temperatures, devoid of independent verification of chiral phases through second harmonic generation (SHG), have led to an unresolved debate regarding the existence of a low-temperature phase transition (PT) and the noncentrosymmetric nature of the low-temperature phase. Now, by combining differential scanning calorimetry, single-crystal X-ray diffraction, dielectric, as well as linear and nonlinear optical spectroscopies on Tz2PbCl4, we reveal a sequence of reversible PTs at T1 = 361 K (phase I-II), T2 = 339 K (phase II-III), and T3 = 280 K (phase III-IV). No SHG activity could be registered for any of the four crystal phases, as checked by wide-temperature range SHG screening, supporting their centrosymmetry. The dipole relaxation processes indicate a decrease in activation energy with increasing temperature, from 0.60, 0.38, to 0.24 eV observed for phase IV (space group P21/c), phase III (Pnma), and phase II (Cmcm), respectively. This change is interpreted as a result of the diminishing strength of H-bonds as the system transforms from phase IV to III and subsequently to II. The weaker H-bonds facilitate the reorientation of Tz+ cations in the presence of an external electric field. The photoluminescence spectra of Tz2PbCl4 reveal an intriguing interplay of narrow and broadband emission, linked respectively to free excitons and excitons trapped on defects. Notably, as the temperature decreases from 300 K to 16 K, both the emission bands exhibit distinctive blue and red shifts, indicative of increased in-plane octahedral distortion. This dynamic behaviour transforms the photoluminescence of Tz2PbCl4 from greenish-blue at 300 K to yellowish-green at 13 K, enriching our understanding of 2D lead halide perovskites and highlighting the optoelectronic potential of Tz2PbCl4.

Extremely Slow Thermally-Induced Spin Crossover in the Two-Dimensional Network [Fe(bbtr)3 ](BF4 )2.

Cooling [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) triggers very slow spin crossover below 80 K (T1/2 ↓ =76 K). The spin crossover (SCO) is accompanied by a hysteresis loop (T1/2 ↑ =89 K). In contrast to isostructural perchlorate analogue [Fe(bbtr)3 ](ClO4 )2 in which spin crossover during cooling is preceded by phase transition at TPT =126 K in tetrafluoroborate phase transition does not occur to the beginning of spin crossover (80 K). Studies of mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.5≤x≤0.9) showed that a phase transition precedes spin crossover, however, for x≅0.46 intersection of T1/2 (x) and TPT (x) dependencies takes place. The application of pressure of 1 GPa shifts the spin crossover in [Fe(bbtr)3 ](BF4 )2 to a temperature above 270 K. High-pressure studies of neat tetrafluoroborate and perchlorate, as well as mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.1≤x≤0.9), revealed that at 295 K P1/2 value changes linearly with x indicating similar mechanism of spin crossover under elevated pressure in all systems under investigation. Variable pressure single crystal X-ray diffraction studies confirmed that in contrast to thermally induced spin crossover undergoing differently in tetrafluoroborate and perchlorate an application of high pressure removes this differentiation leading to a similar mechanism depending at first on start spin crossover and then P-3→P-1 phase transition occurs. In this report we have shown that 2D coordination polymer [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) treated to date as spin crossover silent shows thermally induced spin crossover phenomenon. Spin crossover in tetrafluoroborate is extremely slow. Determination of the spin crossover curve required carrying measurement in the settle mode-cooling from 85 to 70 K took about 600 h (average velocity of change of temperature ca. 0.0004 K/min).

Conformation-aggregation interplay in the simplest aliphatic ethers probed under high pressure.

The structures of the simplest symmetric primary ethers [(CnH2n+1)2O, n = 1-3] determined under high pressure revealed their conformational preferences and intermolecular interactions. In three new polymorphs of diethyl ether (C2H5)2O, high pressure promotes intermolecular CH...O contacts and enforces a conversion from the trans-trans conformer present in the α, ß and γ phases to the trans-gauche conformer, which is higher in energy by 6.4 kJ mol-1, in the δ phase. Two new polymorphs of dimethyl ether (CH3)2O display analogous transformations of the CH...O bonds. The crystal structure of di-n-propyl ether (C3H7)2O, determined for the first time, is remarkably stable over the whole pressure range investigated from 1.70 up to 5.30 GPa.

Helical model of compression and thermal expansion.

A negative linear temperature expansion and a negative linear compressibility were observed for imidazolium benzoate salt. Its strongly anisotropic strain induced by the temperature and pressure changes has been explained by the mechanism of H-bonded helices deformed in the structure. X-ray diffraction and vibrational spectroscopy were used to analyze interactions in the crystal. The Quantum Theory of Atoms in Molecules (QTAiM) approach was applied to analyze the hydrogen bonds and other interactions. In the salt under study, the interactions within the helix are substantially higher in energy than between helices. With decreasing temperature and increasing pressure, the value of the helix pitch increases while the value of the semi-major axis decreases, which results in the negative linear expansion and negative linear compression, respectively.

A new look at imines and their mixture with PC71BM for organic, flexible photovoltaics.

Due to its high electron affinity and electron mobility in a wide absorption range of the visible solar spectrum, [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is often used as an efficient acceptor in organic photovoltaics. In turn, imines are additives to the active layer of organic solar cells, mainly due to the free electron pair of the imine nitrogen atom and the presence of various chemical groups affecting the polarity and conformations of molecules. However, the attainable efficiency is not as high as expected. Therefore, we have systematically investigated two imines and their mixtures with PC71BM by spectroscopic (the high pressure UV-Vis and frequency domain dielectric), thermoelectric, and mechanical methods for organic, flexible photovoltaics. Both the imines, (N,N'E,N,N'E)-N,N'-([2,2':5',2"-terthiophene]-5,5"-diylbis(methanylylidene))bis(benzo[d]thiazol-2-imine) (SC3) and (6E)-N-((5-(5-(5-((E)-(4-(4-(4-fluorophenyl)thiazol-2-yl)phenylimino)methyl)thiophen-2-yl)thiophen-2-yl)thiophen-2-yl)methylene)-4-(4-(4-fluorophenyl)thiazol-2-yl)benzenamine (SC13), have the same core composed of three thiophene rings but different terminal chains of the molecules. In the imine SC3, the imine bond is followed by benzothiazole rings on both sides of the core, while in SC13, a thiazole ring separates two benzene rings, the terminal one F-substituted. The difference in molecular structure affects the electric properties of the neat imine and its mixed layers. An addition of PC71BM to the imines improves their electric conductivity. The mechanical studies focused on the stress at break and elongation showed superior behaviour compared to fullerene derivative. High pressure systematically reduces the band gap energy, Eg, from 1.68 eV at 0.16 GPa to 1.51 eV at 2.69 GPa for PC71BM, from 1.77 eV at 0.1 MPa to 1.53 eV at 4.15 GPa for SC3, and from 1.99 eV at 0.11 GPa to 1.8 eV at 3.10 GPa for SC13, as determined by the UV-Vis absorbance measurements in a diamond-anvil cell. These Eg reductions reflect the compressed intermolecular interactions that can be used to monitor the structural stability of these compounds. Based on the dielectric studies it was found that the relaxation processes registered for both imines are probably the grain boundary relaxation. Two processes also appear in the systems with PC71BM, but none of them is the one characteristic of imines. The high-frequency process has a dipole character while the low-frequency one is probably the grain boundary relaxation of these systems. The mechanism of quasi-DC conduction in various temperature ranges in the studied systems was also determined.

Solute - solvent repulsion effects on the absorption spectra of anthracene in n-hexane investigated under high pressure.

The band positions in the UV-VIS absorption spectra of compressed solution of anthracene in n-hexane significantly depend not only on the dispersive but also on the repulsive solute-solvent interactions, what has so far been omitted. Their strength is determined not only by the solvent polarity but also by Onsager cavity radius changing with pressure. The results obtained for anthracene show that repulsive interactions should be included in the interpretation of barochromic and solvatochromic results of aromatic compounds. We show that the barochromic studies in the liquid solvent can be an alternative to solvatochromic studies, e.g. to determine the polarizability of organic molecules in the electronic excited state. The pressure-induced polarity change in n-hexane exceeds that induced by the exchange of n-alkane solvents between n-pentane and n-hexadecane.

Low-density preference of the ambient and high-pressure polymorphs of DL-menthol.

Lower-density polymorphs of DL-menthol were nucleated and crystallized in their high-pressure stability regions. Up to 0.30 GPa, the triclinic DL-menthol polymorph α, which is stable at atmospheric pressure, is less dense than a new ß polymorph, which becomes stable above 0.40 GPa, but is less dense than the α polymorph at this pressure. The compression of polymorph α to at least 3.37 GPa is monotonic, with no signs of phase transitions. However, recrystallizations of DL-menthol above 0.40 GPa yield the ß polymorph, which is less compressible and becomes less dense than α-DL-menthol. At 0.10 MPa, the melting point of the ß polymorph is 14°C, much lower compared with those of α-DL-menthol (42-43°C) and L-menthol (36-38°C). The structures of both DL-menthol polymorphs α and ß are very similar with respect to the lattice dimensions, the aggregation of OH...O molecules bonded into Ci symmetric chains, the presence of three symmetry-independent molecules (Z' = 3), their sequence ABCC'B'A', the disorder of the hydroxyl protons and the parallel arrangement of the chains. However, the different symmetries relating the chains constitute a high kinetic barrier for the solid-solid transition between polymorphs α and ß, hence their crystallizations below or above 0.40 GPa, respectively, are required. In the structure of polymorph α, the directional OH...O bonds are shorter and the voids are larger compared with those in polymorph ß, which leads to the reverse density relation of the polymorphs in their stability regions. This low-density preference reduces the Gibbs free-energy difference between the polymorphs: when polymorph α is compressed to above 0.40 GPa, the work component pΔV counteracts the transition to the less dense polymorph ß, and on reducing the pressure of polymorph ß to below 0.40 GPa, its transition to the less dense polymorph α is also hampered by the work contribution.

Dipole-Moment Modulation in New Incommensurate Ferrocene.

Despite 70 years of research on metallocenes and their applications, there are still unresolved regions in its phase diagram of the prototypic sandwich compound, ferrocene Fe2+[C5H5]-2 (FeCp2), and its molecular 5-fold symmetry cannot be reconciled with the dielectric response of this crystal. We found a new phase I″ of ferrocene, which reveals the relationships between the molecular conformation, intermolecular interactions, and electric permittivity of this compound. Between 172.8 and 163.5 K, the conformational disorder of ferrocene molecules transforms into the incommensurate modulation. The structure of phase I″ is described in the (3+2)-dimensional superspace, where the molecular conformations, rotations and inclinations of the Cp rings, molecular tilts, and displacements of the Fe2+ cations, as well as the CH···π bonds in the crystal environment, are modulated. These geometric changes combine into the FeCp2 bending distortion, breaking the 5-fold symmetry and generating waves of molecular dipole moments with their amplitudes approaching 4 × 10-30 C·m.

Competition of interactions and a new high-temperature phase of selenourea.

The aggregation of molecules is usually associated with a specific type of interaction, which can be altered by thermodynamic conditions. Under normal conditions, the crystal structure of selenourea, SeC(NH2)2, phase α is trigonal, space group P31, Z = 27. Its large number of independent molecules (Zα' = 9) can be associated with the formation of an NH...N hydrogen bond substituting one of 36 independent NH...Se hydrogen bonds, which prevail among intermolecular interactions. Phase α approximates the trigonal structure with a threefold smaller unit cell (Z = 9), which in turn approximates another still threefold smaller unit cell (Z = 3). The temperature-induced transformations of selenourea have been characterized by calorimetry and by performing 21 single-crystal X-ray diffraction structural determinations as a function of temperature. At 381.0 K, phase α undergoes a first-order displacive transition to phase γ, with space group P3121 and Z reduced to 9, when the NH...N bond is broken and an NH...Se bond is formed in its place. Previously, an analogous competition was observed between NH...N and NH...O hydrogen bonds in high-pressure phase III of urea. The lattice vectors along the (001) plane in low- and high-temperature phases of selenourea are related by a similarity rule, while the lattice dimensions along direction c are not affected. This similarity rule also applies to the structures of phase γ and hypothetical phase δ (Z = 3). The thermally controlled transition between enantiomorphic phases of selenourea contrasts with its high-pressure transition at 0.21 GPa to a centrosymmetric phase ß, where both the NH...Se and NH...N bonds are present. The compression and heating reduce the number of independent molecules from Z' = 9 in phase α, to Z' = 2 in phase ß and to Z' = 1.5 in phase γ.

High-Pressure Crystallization and Thermodynamic Stability Study on the Resolution of High-Density Enantiomers from Low-Density Racemates.

High-pressure recrystallization could be the cheapest clean method of resolving enantiomers from the racemates defying Wallach's rule. We have investigated the effect of pressure on sodium tartrate monohydrate (NaTa·H2O), a notorious exception from Wallach's rule: both racemic polymorphs α-dl-NaTa·H2O and ß-dl-NaTa·H2O are less dense than the enantiomers. According to the mobile-equilibrium principle, such high-density enantiomorphs should spontaneously separate under high pressures. The pressure dependence of the Gibbs free energy explains the preferential crystallization of mixed enantiomers of NaTa·H2O.

Metal-free enantiomorphic perovskite [dabcoH2]2+[H3O]+Br- 3 and its one-dimensional polar polymorph.

The structure and stoichiometry of a new metal-free and ammonium-free compound [dabcoH2]2+H3O+Br- 3 (where [dabcoH2]2+ = 1,4-di-aza-bicyclo-[2.2.2]octane dication) correspond to the general formula ABX 3 characteristic of perovskites. In enantiomorphic trigonal polymorph α of [dabcoH2]2+H3O+Br- 3, the corner-sharing [H3O]Br6 octahedra combine into a 3D framework embedding [dabcoH2]2+ dications in pseudo-cubic cages. In the more dense polymorph ß, the face-sharing [H3O]Br6 octahedra form 1D polyanionic columns separated by [dabcoH2]2+ dications. These different topologies correlate with different crystal fields around the cations and their different disorder types: orientational disorders of [dabcoH2]2+ dications and H3O+ cations in polymorph α and positional disorder of [H3O]+ cations in polymorph ß. The orientational disorder increases the lengths of OH⋯Br hydrogen bonds in polymorph α, but NH⋯Br distances of ordered dabcoH2 dications are longer in polymorph ß. The presence of polar [H3O]+ cations in [dabcoH2]2+H3O+Br- 3 polymorphs offers additional polarizability of the centres compared with analogous metal-free [dabcoH2]2+[NH4]+Br- 3 perovskite.

Comment on "Improper molecular ferroelectrics with simultaneous ultrahigh pyroelectricity and figures of merit" by Li et al.

Li et al. (Science Advances, 29 January, p. eabe3068) claim the discovery of two improper ferroelectrics, dabcoHClO4 and dabcoHBF4 (dabco = 1,4-diazabicyclo[2.2.2]octane), and that these materials exhibit superior pyroelectric figures of merit. This information is misleading because of the fundamental methodological errors and false conclusions, not to mention that these ferroelectrics were reported more than 20 years ago. They are proper ferroelectrics, for which the spontaneous polarization is the macroscopic order parameter. We show that the useful pyroelectric coefficients of dabcoHClO4 and dabcoHBF4 are about 1000 times lower than the coefficients reported by Li et al.

Exchanged Metal-Hydrogen Anagostic Bonds and Resonance of Dithiocarbamate and Thioureide Mesomers.

The pressure-induced transformation of plane-square complex nickel(II) bis(N,N-diethyldithiocarbamate) between its soft dithiocarbamate (form I) and thioureide (form II) mesomeres is coupled to the interchange of anagostic Ni⋅⋅⋅H-C interactions from methylene to the methyl group, respectively. At 1.23 GPa, the clearly visible giant anomalous compressibility of the crystal reveals a potential-energy difference of 5.4 kJ mol-1 between the two complex forms. The structural and spectroscopic results, which are supported by quantum-mechanical calculations, connect this solid-state phase transition with the mesomeric transition, and this is accompanied by the conformational transformation of anagostic Ni⋅⋅⋅H-C rearrangement and formation of the charge-assisted S- ⋅⋅⋅H-C bond under pressure.

Stochastic hydration of a high-nitro-gen-content molecular compound recrystallized under pressure.

Partial hydration of organic compounds can be achieved by high-pressure crystallization. This has been demonstrated for the high-nitro-gen-content compound 6-chloro-1,2,3,4-tetrazolo[1,5-b]pyridazine (C4H2N5Cl), which becomes partly hydrated by isochoric crystallizations below 0.15 GPa. This hydrate, C4H2N5Cl·xH2O, is isostructural with the ambient-pressure phase α of C4H2N5Cl, but the crystal volume is somewhat larger than that of the anhydrate. At 0.20 GPa, the α-C4H2N5Cl anhydrate phase transforms abruptly into a new higher-symmetry phase, α'; the transformation is clearly visible due to a strong contraction of the crystals. The hydrate α-C4H2N5Cl·xH2O can also be isothermally compressed up to 0.30 GPa before transforming to the α'-C4H2N5Cl·xH2O phase. The isochoric recrystallization of C4H2N5Cl above 0.18 GPa yields a new anhydrous phase ß, which, on releasing pressure, transforms back to the α phase below 0.15 GPa. The structural transition from the α to the ß phase is destructive for the single crystal and involves a large volume drop and significant elongation of all the shortest intermolecular distances which are the CH⋯N and CH⋯Cl hydrogen bonds, as well as the N⋯N contacts. The α-to-α' phase transition increases the crystal symmetry in the subgroup relation; however, there are no structural nor symmetry relations between phases α and ß.